REPAIR CLEANING OF SEWAGE LINES, SOAK WELLS, SEPTIC TANK, REPAIR TO DRAINGAGE FENCING, FOOTPATH, COMPREHENSIVE B/R MAINT WORKS LIKE FLOORING, JOINERIES, INTERNAL PLUMBING, PLASTERING, ROOF SHEET, FALSE CEILING, REPAIR MAINT REWIRING OF INTERNAL WIR

Amount

Taking down Chowkhats or frames not exc. 1.5 sq.m each with shutters ( without taking off shutters from the frames) and making good disturbed surfaces including removing disposable materials from worksite outside MD land at any distance complete all as specified and directed.

Taking down chowkhats or frames exc. 1.5 sq.m and n exc 4 sq.m. each with shutters ( without taking off shutters from the frames) and making good disturbed surfaces including removing disposable materials from worksite outside MD land at any distance complete all as specified and directed.

Taking down shutters of any description exc 1 sq.m and n exc 2 sq.m each making good disturbed surfaces including removing disposable materials from worksite outside MD land at any distance complete all as specified and directed.

Taking down shutters of any description n exc 1 sq.m each making good disturbed surfaces including removing disposable materials from worksite outside MD land at any distance complete all as specified and directed.

Taking down chowkats or frame n.exc 1.5sqm each.and making good disturbed surfaces including removing disposable materials from worksite outside MD land at any distance complete all as specified and directed.

Taking down chowkats or frame exc 1.5 sqm but n.exc 4 sqm each.and making good disturbed surfaces including removing disposable materials from worksite outside MD land at any distance complete all as specified and directed.

Refixing the shutter of any description n.exc 1 sqm in the same opening complete all as specified and directed.

Refixing shutters of any description exc 1 sq.m and n exc 2 sq.m each in the same opening complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section,unframed work in any position including removing of unserviceable material from work site complete all as specified and directed.

Material and Labour for 2nd class hard wood (well seasoned) scantling clean sawn as in unframed work etc complete all as specified and directed.

Supply and fixing 35 mm thick Factory made plain framed , panelled shutter ( two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 ( Part I) complete all as specified and directed.

Material and labour 35 mm thick, IInd class HW factory made, Glazed and skeleton shutters , open rebated and prepared to receive glass, gauze, etc. (without sash bars) ,edges of framing plain,chamfered or rounded, fitted with cut and mitred beads for securing glass,etc;size of members of shutters as specified in SSR part-I, Section-8, clause 8.24 (a) supplied and fitted to chowkhats complete all as specified complete all as specified and directed.

Material and labour 35 mm thick, IInd class HW factory made, Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into square with plain , chamfered or rounded, mitred and rebated sash bars, any numbers with edge of sash bars, forming moulded for window etc provided with stile and rails as specified in SSR part-I, Section-8, clause 8.24 (b) supplied and fitted to chowkhats complete all as specified and directed.

M&L 2nd Class Hard wood Plain , solid , straight chowkhats and frames , wrought , framed rebated on the solid , rounded or chamfered , put together with glue, pinned at joints, supplied and fixed including tarring back of chowkhats with tar or coal tar black paint complete all as specified and directed.

Supply and fixing Flush shutters, 30 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified.

Material and labour for 125 mm x 60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strikes plate, etc complete as specified.

Material and labour for 105 mm x 60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strikes plate, etc complete as specified.

Supply and fixing Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars , dovetailed or welded complete all as specified and directed.

Supply and fixing Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars , dovetailed or welded complete all as specified and directed.

Supply and fixing for Steel ventilator with top hung shutter including hinges steel peg stay, steel handle complete including taking down existing old steel ventilator complete all as specified and directed.

Material and labour mild steel framed work such as grills , gratings, etc., with ends of bars shouldered and/ or riveted, or forged in to spikes; framed guard bars ; barred iron doors; ladders; framed balusters ; walk ways ; railings; frame work of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Supply and fixing stainless steel wire cloth, 0.36 mm nominal dia. of wire and average width of aperture 1.4 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

Supply and fixing in repairs stainless steel wire cloth, 0.36 mm nominal dia. of wire and average width of aperture 1.4 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

Supply and fixing 4 mm thick sheet glass, ordinary quality, in squares not exceeding 0.5 Sqm in each pane, glazed with putty or fixed with beads complete all as specified and directed.

Supply and fixing in repair 3 mm thick sheet glass, ordinary quality, in squares not exceeding 0.5 Sqm in each pane, glazed with putty or fixed with beads including hacking out old broken glass complete all as specified.

Supply and fixing solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with Mild steel square tube , supplying and fixing in opening as per specifications and drawings

Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain col-our PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

Supply and fixing butt Hinges, medium weight, cold rolled mild steel, 100 mm size complete all as specified and directed.

Supply and fixing Aluminium handles, cast type anodised, 150 mm long complete all as specified and directed.

Supply and fixing Aluminium handles, cast type anodised, 125 mm long all complete all as specified and directed.

Supply and fixing Aluminium, anodised, barrel tower bolts of extruded section and fixed, 150 mm length of bolt complete all as specified and directed.

Supply and fixing Aluminium, anodised, barrel tower bolts of extruded section and fixed, 100 mm length of bolt complete all as specified and directed.

Supply and fixing Aluminium handles, cast type anodised, 100 mm long complete all as specified and directed.

Supply and fixing butt Hinges, medium weight, cold rolled mild steel, 75 mm size complete all as specified and directed.

S&F aluminium anodised sliding door bolt 250mm long with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.

M&L for preparation of untreated new wooden surface of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint, with a coat of pink primer.

M&L for preparation of new steel surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Dismantling wall and ceiling boards ( fibre, pulp, insulation ,etc. ) or insulation boards/slabs/blankets, any thickness, including cover fillets including removing rubbish obtained from dismantling from worksite outside MD land at any distance specified.

Material and labour for non asbestos fibre cement building board, 4mm thick, fixed to aluminium frame work with screw as in ceiling in flat or sloping complete all as specified and directed.

Supplying and fixing Aluminium anodised snap grid frame work as in false ceiling all as specified size of grid 605 X 605 mm with aluminium main T section of size 36.5 X 23.5 X 1.6 mm and cross T of size 23.5 X 23.8 X 1.6 mm with aluminium wall angle of size 36.5 X 23.5 X 1.6mm with suspender complete all as specified and directed.

M&L for preparation of untreated old wooden surface of any description Exc 10cm in width or girth one coat of varnish complete all as specified and directed.

Taking down shutter of any description not exc 1 Sqm each and refixing in same opening including easing and adjusting of shutter as required including renewal of unserviceable screws all as directed.

Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each and refixing in same opening including easing and adjusting of shutter as required including renewal of unserviceable screws all as directed.

M&L for Anodized aluminum frame with powder coating not less than 50 micron thick for doors, windows, ventilators with one or more rebate including joining cleat for fixing etc complete all as specified

M&L for Anodized door shutters, aluminum section weighting 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handle four No’s in each door, hinges anodized aluminum snap beading screws etc complete all as specified with powder coating. Thickness not less than 50 micron.

M&L for Anodised aluminium window and ventilator shutters, sliding or fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified with powder coating not less that 50 micron.

Supply and fixing 5.5 mm thick sheet glass, ordinary quality, in squares not exceeding 0.5 Sqm in fixed in aluminium shutters, glazed with putty or fixed with beads complete all as specified and directed.

Supply and fixing 5.5 mm thick sheet glass, ordinary quality, in squares exceeding 0.5 Sqm in fixed in aluminium shutters, glazed with putty or fixed with beads complete all as specified and directed.

Supply and fixing 4 mm thick figured glass,pin head type, in squares not exceeding 0.5 Sqm in fixed in aluminium shutters, glazed with oil putty complete all as specified and directed.

Material and labour for aluminium grill of thickness 5mm and opening not exceeding 75mm*100mm complete all as specified and directed.

Supply and fixing in repair Mortice lock , 2 lever ,vertical type , size 100mm, complete all as specified and directed.

Supply and fixing in repair Prelaminated particle board 18/19 mm thick, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, as in kitchen cabinet shutter complete all as specified and directed.

Taking out existing aluminium frame with shutter and repair of all necessary items i.e. hinge aluminium snap beading, rubber packing, glazing clip, door closer,door closer screw etc, any type of repair and refixing the same and making good distrubed portion of wall/floor incl. complete all as specified and directed. (note.- cost of hinge aluminiium snap beading, rubber packing, glazing clip, door closer,door closer screw ,etc are inclusive in quoted rate) complete all as specified and directed.

Repair/Replacement of hinges ,window stays,handles etc, welding of hinge of steel window, complete all as specified and directed. (Note- cost of hinges ,window stays, handles etc, are inclusive in quoted rate.)

Material and labour for PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in hold fast block, filling in pressed steel chowkats including necessary form work etc complete all as specified and directed.

Supply and fixing of bands, straps,hold fast etc conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

Dismantling of plain or corrugated, semicorrugated ,etc sheets in roof coverings including removing of unserviceable material from work site complete all as specified and directed.

Supply and fixed Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fixed Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F in repairs aluminium body ( extruded section ) body Door closer hydraulically regulated, designation No. 3 , universal type , suitable for door shutters 851 to 1000 mm in width and of weight between 61 to 80kg complete all as specified and directed.

M&L as in repair for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, fixed in repairs, with & including replacement of floor tiles if any broken during repair work and making good disturbed surfaces matching to the existing surfaces complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Material and labour for rolled mild steel as in roof truss, purlins, rails and fastenings and similar work including distance pieces, cleats etc conforming to Fe-410-W (Gde-E 250) including cutting and welding as required complete all as specified and directed.

Supply and fixing in repairs 140 mm floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), in floors, aprons etc .laid dry or laid dry and pointed including removing of demolished material from work site at any distance outside MD land complete all as specified and directed.

Material and labour for Non Skid ceramic coloured tiles (1st quality) 7 to 8mm thick ( square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match. over 15 mm thick screeding in CM 1:4 complete all as specified. ( Note: screed bed shall also deemed to be included in the quoted rate by the contractor ).

Material and labour for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm/ 600 x 300 x 7- 8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick including screeding in CM 1:4 complete all as specified and directed. (Note: screed bed shall also deemed to be included in the quoted rate by the contractor ).

Material and labour for vitrified ceramic (square/rectangular) light shade coloured polished tiles, (1st quality) area of each tiles not exc 0.36 sqm and 10mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white cement and pigment to match over 15 mm thick screeding in CM 1:4 complete all as specified ( Note: screed bed shall also deemed to be included in the quoted rate by the contractor ).

Material and labour for Non Skid ceramic coloured tiles (1st quality) 7 to 8mm thick ( square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. over 20 mm thick screeding in CM 1:6 complete all as specified. ( Note: screed bed shall also deemed to be included in the quoted rate by the contractor )

Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L 25mm thick for PCC 1:2:4 type B-0 (12.5mm graded aggregate) as in sub base to PCC floor/ tilling etccomplete all as specified and directed.

S&F Sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

Taking up or down steel tubing and connections of 15mm dia bore GI pipe, including cleaning for re-fixing or removal to store complete all as specified and directed.

Taking up or down steel tubing and connections of 20mm dia bore GI pipe, including cleaning for re-fixing or removal to store complete all as specified and directed.

S&F Steel water tubing medium grade 15mm bore galvanised with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed.

S&F Steel water tubing medium grade 20mm bore galvanised with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed.

Refixing GI pipe 15 mm dia including connections complete fixed to walls or laid in floors complete all as specified and directed.

Refixing GI pipe 20 mm dia including connections complete fixed to walls or laid in floor complete all as specified and directed.

S&F in repairs PVC flushing cistern 10 Ltrs capacity, valveless, syphonic action type, low level white with inlet, ball valve, float and handle complete including brackets and connection to pipe complete including dismantling of existing CI flushing cistern high level incl flush pipe complete all as specified and directed.

S&F in repair vitreous china wash down water closet (pedestal pattern) white with 'P' or 'S' trap front or back inlet complete all as specified and directed.

S&F in repair Vitreous China Squatting Pan of Orissa Pattern long pan size 580 mm x 440 mm white coloured with 'P' or 'S' strap front or back inlet and foot rest any pattern complete all as specified and directed.

S&F in repairs Vittreous China Wash Basin white coloured flat back of size 550 mm x 400 mm including bracket complete all as specified and directed.

S & F in repair vitreous china urinals, bowl type flat back sioze 465 x 395 x 265 mm white with grating and urion for discharge pipe including providing and fixing plugs bedding against wall CM 1:2 complete fixed in repairs.

S&F for PVC Connections 15 mm dia and 600 mm long suitable for pipe with PTMT nut complete all as specified and directed.

S&F in repairs CP fancy type Bib tap 15 mm dia long body cast copper alloy with crutch or butterfly handle ,screwed down,screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F 15mm dia Fancy type Pillar Taps, cast copper alloy with capstan heads chromium plated screwed down, high pressure with long screwed shanks and fly nuts, screwed for iron complete all as specified and directed.

S&F 32mm dia PVC waste pipe approx 850mm long for sink/WHB complete all as specified and directed.

S&F in Repair Health Faucet CP brass with minimum 1.50m long CP flexible pipe, Hose & Wall Hook connection etc complete all as specified and directed.

S&F in Repair CP Soap Dish of Make : Jaquar Cat No 21731 or equvailent from other specified makes.

S&F in repair Towel Ring CP with flange (Cat Part No T-6002A1 of make Parryware or equivalent of Jaquar/Marc/Paryag) fixed on wall with PVC rawl plug & cadmium plated brass screw.

S&F Stainless steel plate rack made out of 1 mm thick stainless steel sheet of size 900x750x250mm complete all as specified and directed.

S&F in repairs stainless steel grating with anti-foul self closing cockroach trap of 100 mm dia for floor/nahni traps complete all as specified and directed.

Taking down cement plaster from brick or concrete surfaces of any description incl raking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick (externally) in CM 1:4 on brick work or concrete surfaces finished even and fair complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:6 on other than fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick in CM 1:3 on concrete surfaces in ceiling, finished even and smooth without using extra all as specified and directed.

Material and labour for preparation of new surfaces of walls and applying wall care white putty thickness not less than 2mm and sand papering surfaces to achieve smooth surfaces and applying two coats of acrylic based distemper emulsion over a coat of cement based primer, white or tinted including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified and directed.

Prepration of new surface of wall and applying two coats of cement based paint over a coat of primer coat white or tinted complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls & applying three coats of white wash on wall complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling & applying three coats of white wash on ceiling complete all as specified and directed.

M&L for preparation of old surfaces of walls/soffits/chajja/facia etc and applying two coat of weather proof exterior grade paint on walls over a coat of wall care white putty thicknes not less than 2mm and sand papering surfaces to achieve smooth surfaces including complete removal of surfaces with mechanical means/sand paper complete all as specified and directed.

Material and labour for preparation of old surfaces of walls and complete removal of old treated surfaces by mechanical means and applying wall care white putty thickness not less than 2mm and sand papering surfaces to achieve smooth surfaces and applying two coats of acrylic based distemper emulsion over a coat of cement based primer, white or tinted including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls & applying two coats of white wash on wall complete all as specified and directed.

M&L for preparation of old plastered surfaces of ceiling & applying two coats of white wash on ceiling complete all as specified and directed.

M&L for preparation of old wooden surface of any description over 10 cm width or girth like false ceiling, fillets,doors/windows etc , not otherwise described and applying one coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old steel surface of any description over 10 cm width or girth etc , not otherwise described and applying one coats of synthetic enamel paint complete all as specified and directed.

Supply and fixed in Repair sheet glass assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long which necessary or directed.

Supply and fixing in Repair Glass Corner Shelf fancy type complete all as specified and directed.

Cleaning of septic tank/Grease trap/manhole of any size and depth exc 1.50 M and not exceeding 4.5 M from the GL , by taking out / removing the accumulated sludge/ soil / sewage / any other foreign / foul materials etc (solid / semi solid) sludge and sludge water using mehanical device / diesel pump of suitable type and capacity, removing the sludge out side MOD land and burrying it is pits excavated for the purpose including disposal of the soil and making the system functional and applying bleaching powder for hygenic complete all as specified and directed.

Cleaning of soak well of any size and depth exc 1.5 M and not exceeding 4.5 M from the GL , by taking out / removing the accumulated sludge/ soil /brick bats/ sewage / any other foreign / foul materials etc (solid / semi solid) sludge and sludge water using mehanical device / diesel pump of suitable type and capacity, removing the brick bats out side MOD land and burrying it is pits excavated for the purpose including disposal of the soil and making the system functional complete all as specified and directed.

Cleaning of blockage of sewer lines 100/150/200 mm bore, manholes in any type of sewer line( i.e. branch sewer line, main sewer line) and by attending the complaints for day to day maintenance in all days in a month except Sundays, Gazetted Holidays and National Holidays, by way of cleaning desludging foreign materials as well as rodding of sewer line between manholes manually /mechnically or pumping out sewage from blocked manhole including desludging where required and ordered by EIC and keeping sewer line functional upto final drop/outlet into septaic tank, soakwell/sump all as specified and directed.

Cleaning of manhole/Grease trap of any size and depth Not exc 1.50 M by taking out / removing the accumulated sludge/ soil / sewage / any other foreign / foul materials etc (solid / semi solid) sludge and sludge water using mehanical device / diesel pump of suitable type and capacity, removing the sludge out side MOD land and burrying it is pits excavated for the purpose including disposal of the soil and making the system functional and applying bleaching powder for hygenic complete all as specified and directed.

Demolition and breaking up 100mm dia drain pipes (saltglazed, stoneware , AC or reinforced concrete drain pipe, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.

Demolition and breaking up 150mm dia drain pipes (saltglazed, stoneware , AC or reinforced concrete drain pipe, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed.

Supply and fixed 110 mm bore PVC (SWR) pipes single socketed ISI marked IS-13592, type 'B' in any length with rubber ring joints laid in trenches or in floors complete all as specified.

Supply and fixed 160 mm bore PVC (SWR) pipes single socketed ISI marked IS-13592, type 'B' in any length with rubber ring joints laid in trenches or in floors type complete all as specified and directed.

Material and labour for Plain cement Concrete (1:3:6) type C-2 bed to 110 mm bore drain pipes including packing under , and haunching against the sides of pipes after they are laid and tested in complete all as specified and directed.

Material and labour for Plain cement Concrete (1:3:6) type C-2 bed to 160 mm bore drain pipes including packing under , and haunching against the sides of pipes after they are laid and tested in complete all as specified and directed.

Supply and fixed PVC (SWR) gully trap 125/110 mm , setting and jointing with solvent cement complete all as specified and directed.

Demolition brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles including removing of demolished material from work site complete all as specified and directed.

Material and labour for Brickwork with old size bricks,having crushing strength 75Kg/sqcm, locally avaliable, straight or curved on plan excd 6 M mean radius in built in cement and sand mortar 1:4 complete all as specified and directed.

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces , in cement and sand mortar 1:4 using water proofing compound @ 200 ml per bag of cement or as per manufacturer's instructions (WPC measured and paid separately) complete all as specified top surfaces finished even and smooth without using extra cement complete all as specified and directed.

Supply only integral water proofing compound ( liquid ) conforming to IS : 2645-2005 complete all as specified and directed.

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces , in cement and sand mortar 1:4 finished even and smooth without using extra cement complete all as specified and as directed.

Demolition of cement concrete ( unreinforced ) in ground floors and pavings not exceeding 15 cm thick above or below ground level, including removing of demolished material from work site at any distance outside MD land complete all as specified and directed.

Material and labour for plain cement concrete 1:3:6 type C-2 using 40 mm graded crushed stone aggregate as in foundation , filling, mass concrete works complete all as specified and directed.

Material and labour for plain cement concrete type B-1 (1:2:4) using 20mm graded crushed stone aggregate as in copings, benching, bed plates, surface channel, drain and like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary form work complete.

Cleaning of blockage of blocked from bottle traps, gully trap, nahani traps, P/S trap of WCs, bath, urinals etc. and cleaning of sewage line from nahani trap/ floor trap upto gully trap of first manhole and making the functional with manually/ pressure using pumps complete all as specified and directed.

Demolition of Cement concrete ( reinforced) of any description and in any position not otherwise specifically provided for including reinforced cut to facilitate demolition complete including removing demolished material from work site all as specified and directed.

Material and labour for precast reinforced cement concrete 1:2:4 type B-1 as in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set un cement mortar 1:6 complete all as specified and directed.

Material and labour for Mild steel deformed or twisted bars ( TMT) 8 mm dia and over, cut to length, bent to shape required, hooking ends and binding with including mild steel wire(annealed) not less than 0.90 mm dia. or higher complete all as specified and directed.

Excavation in trenches not exceeding 1.50 mtr wide and not exceeding 1.50 mtr deep for taking out/ laying of under ground cable, pole, pipe, stay and getting out in soft soil strata including making good to the disbturbed surfaces such as hardstanding, footpath/ pavments complete all as specified and directed.

Removal of surplus soil not exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

Returning filling in including spreading leveling watering and well ramming in layers not exceeding 25cm spread any type of soil complete all as specified and directed.

Excavating in trenches, in soft/loose soil , not exceeding 1.5 m wide and exceeding 1.5 m and n.exc 3 m in depth for filling of slugde/ foreign material obtained from above items up to 60 cm below GL and filling excavated soil obtained from pit and applying bleaching powder 2 kg/ pit for hygienic complete all as specified and directed.

Supply only high power bleaching powder conforming to IS 1065 complete all as specified and directed.

M&L for sand cushioning to under ground cable provided with a layer of sand 8 cm depth before laying of cable and 15 cm depth after laying and stretching the cable all as specified. Note: Punned thickness of sand shall be measured & paid.

M&L for well burnt sub class 'B' bricks of nominal size 230X115X75 mm abutting each other for mechanical protection of cable with width equal to lenght of brick including taking out old complete all as specified and directed.

Taking down or out existing serviceable/ unserviceable cable of sizes 2/3.5/4 core 10/16/25/50/70/95 sqmm from the trenches / ducts/ along walls / poles / through poles / under roads/ inside sub station including segregation the serviceable cable by cutting down defective portion after testing by meggar (insulation tester) , stacking and rolling unserviceable cable for further disposal all as directed by Engineer in charge Note :(1) Excavation / cutting of road or floor/ GI pipe & laying / relaying of cable etc shall be measured and paid seperately under respective item of this schedule. ( 2 ) Serviceable brick protection to be stacked carefully for counting and re use.

Supply, fixing/ laying, testing, connecting and commissioning in replacement of LT under ground cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cable (heavy duty) with multistranded aluminium conductor, 1100 Volts grade of size 50 Sqmm x 3.5 core laid in trenches/ on wall/ poles/ ducts/ pipe including cable glands, lugs and suitable size of MS saddle clips (where ever cable laid in ceilings / walls without cable duct) complete all as specified and directed.

Ditto all as per item No. 141 here in before but of size 16 Sqmm x 4 core complete all as specified and directed.

M&L for boring/ drilling (horizontally) hole manually under existing road, pavement, hard standing (maximum 10mtr in width) suitable for passing GI tubing 40 to 50mm bore complete all as specified and directed.

Supply and fixing in replacement GI protection pipe of 50 mm dia light grade for cable protection including all fittings laid in trenches or fixed on pole/ walls with mild steel clamps, bolts, nuts and washers complete all as specified and directed. Note:- Earth work shall be measured and paid separately.

S&F in replacement of MCCB, TPN, 250 Amps, 25kA breaking capacity with overload and thermal tripping feature, 415Volts AC, 50Hz complete all as specified and directed. Note:- Minor addition/ alteration and requirement of nuts and bolts, cable lugs for fixing of MCCB in existing panel deemed to be included in quoted rate.

S&F in replacement of MCCB, TP, 63/100 Amps, 16kA breaking capacity, 415Volts AC, 50Hz complete all as specified and directed. Note:- Minor addition/ alteration and requirement of nuts and bolts, cable lugs for fixing of MCCB in existing panel deemed to be included in quoted rate.

S&F in replacement of on load changeover switch four pole of 200 Amps, 415 volts, 50 Hz without enclosure complete all as specified & directed. Note:- Cost of minor addition, alteration, fabrication work (if required) at site to fix properly deemed to be included in the quoted rates.

M&L for restringing of existing two wire over head line LT over head including removing the existing binding wire and rebinding with new binding wire after tightening of overhead lines including providing the cable/wire separator at suitable distance by disconnecting existing jumper and connections and reconnecting after tightning of conductor all as directed by Engr-in-Charge. Note:- Two wire run of conductor and two run of earth continuity wire in LT line shall be measured & paid as one span length.

M&L for restringing of existing four wire over head line LT over head including removing the existing binding wire and rebinding with new binding wire after tightening of overhead lines including disconnecting existing jumper and connections and reconnecting after tightning of conductor all as directed by Engr-in-Charge. Note:- Four wire run of conductor and two run of earth continuity wire in LT line shall be measured & paid as one span length.

Supply and fix in replacement pin type, porcelain, vitreous, white brown or green insulator including one galvnised mild steel spindle, two nos galvanised iron washer and one galvnised iron nut, 100mm height, 65mm dia for 1100v grade complete all as specified & directed.

Supply and fix in replacement shackle, porcelain, vitreous, white brown or green insulator including galvnised mild steel straps, washers, insulator, bolts, washers and nuts for size 100mm height and 115mm dia for 1100 Volts with 31x5mm galvanised steel straps and 14mm dia of bolts complete all as specified and directed.

M&L for preparation of old painted steel or iron surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enameled spray painting of approved shade complete all as specified and directed.

S&F in replacement of voltmeter digital type 0-500 volts AC, flush mounting type, 3 phase complete all as specified and directed.

S&F in replacement of ammeter digital type, flush mounting type, 3 phase complete with suitable CTs of range as required on site complete all as specified and directed.

S&F in replacement of CTs of range 400/5Amps as required on site complete all as specified and directed.

S&F in replacement of LED indicator as per colour scheme (Red/Yellow/Blue/Green) suitable for LT panel complete all as specified and directed.

M&L for repair/ maintenance of LT panel door by replacement of hinges and locking arrangement including necessary welding/ nuts, bolts, washers as per existing size/ type complete all as specified and directed. (Note: (i) One side door will be measured & paid as one job). (ii) New LT panel door (only) of suitable size and thickness shall be measured and paid separately under relevant item of this schedule.)

M&L for dehydration & filteration of transformer oil by dehydration plant (bringing plant at site) including testing of sample before and after dehydration and filteration to achieved 40 KV at 2.5 mm gap complete all as specified and directed. Note: (a) The filtration of the transformer oil shall be carried out at different sub stations of Air Force Station Mohanbari. (b) The report before filtration & after filtration to be submitted by contractor. (c) Transformer oil for topping up will be measured and paid separately.

Supply & toping up of new transformer oil (in sealed barrel) confirming to IS 335 Std having dielectric strength 40KV at 2.5mm gap after initial dehydration complete all as specified and directed. Make: Savita/ Castrol/ Power oil/ Truoil.

M&L for spray painting (including bringing compressor of suitable size at site) old painted steel or iron surface of 250KVA transformer (11/0.433KV) complete with all connected fittings & fixtures i.e. buchholz relay, conservator tank, cooling fins and other standard fittings & attachments as per existing colour scheme and pattern with atleast two coats of synthetic enameled paint after duly preparing the surface by cleaning with scrapers and emrey paper to the entire satisfaction of Engr-in-Charge complete all as specified. Note:- Contractor will apply one layer of greese over specification plate / any written letter before painting and clean the same after painting, rates for the same is deemed to be included in the item quoted rates.

Material and labour for painting of erected steel tubular swaged pole of HT over head line of 11 m long (except embedded portion) complete including all MS work mounted on pole with two coat of aluminium paint after necessary preparation, cleaning including scrapping up of old corroded paint dirt/ dust/ rust carefully and providing 03 Nos bands/ straps with synthetic enamel paint (any tint 30 cm wide each) from top of plinth block and writing of pole number with white synthetic enamel paint on black back ground complete all as specified and directed.

Disconnecting the distribution transformer outdoor/ indoor type from HT and LT side, opening carefully at site, draining out transformer oil (keeping safe in barrel for reuse) upto HT/ LT box for rectifying the leakage by replacing the unserviceable spare parts of capacity 125 to 315 KVA, 11/ 0.433 KV transformer, refilling the transformer oil and re-assembling after repair including testing for any oil leakages and connecting the HT/ LT side and testing on available electric load complete all specified and directed . Note:- (a) Defective parts shall be measured and paid separately as "Supply only". (b) Charge of welding work (if require) is deemed to be included in the quoted rate.

Supply only LT bushings with brass studs of existing specification complete all as specified and directed.

Supply only top cover gasket set of existing specification and size complete all as specified and directed.

Supply only HT bushing with brass studs 11 KV of existing specification complete all as specified and directed.

Supply onlyt oil level indicator suitable for 125 to 315 KVA, 11/ 0.433 KV transformer alongwith connected accessories complete all as specified and directed.

Supply and fix in replacement of air breather assembly transparent plastic body with top and bottom portion pressed with metallic cover, filled with new silica gel (blue in colour) suitable for 125 to 315 KVA, 11/ 0.433 KV transformer, fixing on existing pipe of size 15/20/25 mm dia with suitable reducer/ connector complete as per site requirement all specified and directed. Note:- (a) Cost of modification (if required to fix on existing MS pipe) shall be deemed to included in the item quoted rate.

Supply and fix in replacement of danger notice plate of 1.6 mm thick mild steel sheet vitreous enameled white with letter, figures and conventional skull & bones in signal red colour & fixed with & including MS clamps, bolts, nuts and of size 25 x 20cm for HT 11KV complete all specified and directed.

Supplying and laying in replacement of synthetic rubber insulated mats 2.5 mm thick for voltage 11 KV for electrical purpose as per IS 15652-2006 (superseding IS 5424) suitable for electrical shock safety of sizes 2m x 1m complete all specified and directed.

S&F in replacement of gang operated air break switch triple pole, mechanically manual operated, mounted on 9 Nos insulator and steel frame, with operating mechanism worked from ground level, for current rating upto 400 Amps, 11000volts complete all as specified and directed.

S&F in replacement of lightning arrester expulsion type complete with all fittings, transmission class, discharge capacity 65 Kilo Amps, 11000 volts complete all as specified and directed.

M&L for spreading of graded crashed aggregate 40mm nominal size to a true surface and leveled in layers not exc. 20 cm thick for switch yard complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate 600mm x 600mm x6mm thick elecrode and 32mm x 6mm galvanised iron strip as earthing lead burried directly in ground vertically (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level, the earth plate surrounded by adequate quantity of charcoal dust and common salt to a packed thickness of 15 cm on all sides connected to GI strip 32mm x 6mm as earth lead by means of bolts, nuts, check nuts and washers (including welding) of galvanised iron or steel and connected to main switch board / panel/ test point at the other including necessary earth work in any type of soil, returning filling in and removal of surplus soil, concrete pit in PCC (1:3:6) type C1, pre cast RCC 1:2:4 type BI cover slab 54cm x 54cm x 5cm reinforce with 8mm dia bar TMT @150mm centre to centre both ways with one handle for lifting made out 8mm dia MS bar with wire mesh funnel, 20mm GI tubing medium grade for watering and 40mm GI tubing light grade for protection, test point, testing on completion all as shown in Electrical Plate No 3 of SSR Part-I complete all as specified and directed.

Taking down carefully aluminium/ copper point wiring (light, fan, socket, power point) including batten, conduit and fittings such as switches, ceiling rose, sockets, brackets, light fittings, switch board etc removing, making good distrubed surfaces of wall, floor, ceiling etc complete all as specified & directed.

M&L for point wiring with 1.5 sqmm cable PVC unsheathed and insulated copper multistranded conductor (FRLS) 1100 Volts grade cable (red colour cable to be used for phase connection and black colour cable to be used for neutral connection) including PVC casing capping with all accessories including 1.5 sqmm copper multistrand conductor (FRLS) 1100 Volts grade unsheathed PVC insulated (green colour) continuity earth wire connected to common earth dolly and sunk cast pressed steel terminal box made out of MS sheet for mounting of fittings like switch, socket and fan regulator with 3 mm thick hylum laminated sheet cover complete all as specified and as directed for the following:-

Light/ Fan/ Bell point controlled by one switch

5 Amp switch socket on same board

5 Amp switch socket on Independent Board.

All as per item No 176 here in before but 2.5 sqmm P.V.C insulated unsheathed cable with stranded copper conductor for 6 pin, 6/16 Amp switch socket combination on independent board.

S&F socket 3 pin, 5 Amps piano flush type 230/240 V complete all as specified and as directed. ( For same board)

S&F switch socket combination 5/6 Amps piano flush type 230/240 V complete all as specified and as directed. ( For independent board).

S&F switch socket combination 3 pin combination, 15/16 Amps piano flush type 230/240 V complete all as specified and as directed.

S&F ceiling rose 3 terminal/ PVC/ polycarbonate, isolated body, surface type complete all as specified and as directed.

S&F step type electronic fan regulator piano flush type 230 volt, speed control and connecting up and fix position complete all as specified and as directed.

S&F switch piano flush type 5/6 amps, 240 volt, single pole, one way complete all as specified and as directed.

S&F bell push piano flush type, 5/6 amps, 240 volt, single pole complete all as specified and as directed.

S&F buzzer/ ding dong bell, AC 230 volt, single pole complete all as specified and as directed.

S&F in repair of wall decorative ultra slim LED 18/20 Watt, 230 volts, 50 Hz, 4 feet, lighting fixture with extruded polycarbonate lighting fixture, environmental friendly, energy efficient ready to use pack including lamp complete all as specified and directed.

S&F in repair of ultra slim LED batten 10 Watt, 230Volts, 50 Hz, decorative ultra slim LED lighting fixture with extruded polycarbonate, environmental friendly including lamp, connection wire all as specified and directed.

S&F in repair of recessed mounted 36 Watt (clear white) LED panel light 2x2 feet, 230 volts, 50 Hz with CRCA sheet housing precoated white colour and high quality diffuser for uniform light and high efficiency with separate replaceable electronic driver including lamp complete all as specified and directed.

M&L in repair for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm as earth continuity conductor drawn through & including PVC casing-caping medium grade complete all as specified and as directed.

Supply and fixing in repair of factory made sheet metal enclosure for DBs double door, SPN, 240 volt, 8 Way, IP-42 protection with bus bar, neutral link, earth link complete all as specified and as directed.

Supply and fixing in repair of factory made sheet metal enclosure for DBs double door, SPN, 240 volt, 4 Way, IP-42 protection with bus bar, neutral link, earth link complete all as specified and as directed.

Supply and fixing in repair of 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN 32-40 Amp current carrying capacity complete with connection testing complete all as specified and directed.

Supply and fixing in repair of 415V 10KA 'C' curve miniature circuit breaker (MCB) TPN 63 Amps current carrying capacity complete with connection testingcomplete all as specified and directed.

S&F in repair of sheet metal enclosure, single pole and neutral with two pin and earth plug and socket, 20 Amps, 230 Volts, 50 Hz complete with one single pole MCB of 20 Amps, 10kA, 230 volts, 50Hz, C curve type complete all as specified and directed.

Supply and fixing in repair of 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP 10 to 32 Amp current carrying capacity complete with connection testing complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five starrated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply only switch socket combination 5/6 Amps piano flush type 230/240 V complete all as specified and as directed.

Supply only switch socket combination 3 pin combination, 15/16 Amps piano flush type 230/240 V complete all as specified and as directed.

Supply only step type electronic fan regulator piano flush type 230 volt, speed control and connecting up and fix position complete all as specified and as directed.

Supply only switch piano flush type 5/6 amps, 240 volt, single pole, one way complete all as specified and as directed.

Supply only bell push piano flush type, 5/6 amps, 240 volt, single pole complete all as specified and as directed.

Supply only buzzer/ ding dong bell, AC 230 volt, single pole complete all as specified and as directed.

Supply only modular switch 1 way and 1 module 6 amps, 240 volt, complete to match with existing fixture all as specified and as directed.

Supply only modular socket 1 way and 2 module 5/6 amps, 240 volt, to match with existing fixture complete all as specified and as directed.

Supply only modular switch 1 way and 1 module 16 amps, 240 volt, complete to match with existing fixture all as specified and as directed.

Supply only modular switch 1 way and 2 module 15/16 amps, 240 volt, to match with existing fixture complete all as specified and as directed.

Supply only modular fan regulator 1 way and 2 module, 240 volt, to match with existing fixture complete all as specified and as directed.

Supply only fan capacitor 2.5MFD oil type complete all as specified and directed.

Taking up or down of 50mm dia GI and 63mm dia PPR pipe and connections, including cleaning for refixing or removal to store bore of Pipe 50 mm dia GI pipe and 63mm dia PPR pipe

All as per here-in-above but bore of Pipe 25 mm dia GI pipe and 32mm dia PPR pipe complete all as specified and directed.

Supply and lay 3 layer ( inner antimicrobial, outer UV stabilized) ISI marked ,IS-15801, PP-R pipes SDR 11 (PN-10) and PP-R plain fittings in trenches/walls/cellings or laying in floors complete of size outer dia 63 mm including all fittings complete all as specified and directed.

Supply and lay 3 layer ( inner antimicrobial, outer UV stabilized) ISI marked ,IS-15801, PP-R pipes SDR 11 (PN-10) and PP-R plain fittings in trenches/walls/cellings or laying in floors complete of size outer dia 32 mm including all fittings complete all as specified and directed.

M&L for 50 mm bore gate valve cast bronze alloy screwed down high pressure with clutch handle screwed both ends for iron pipe including taking out of old gate valve complete all as specified and directed.

All as per here-in-above item Srl No. 214, but size 25 mm bore

Supply & fixed in repairs PP-R Gate valves (brass insert) 32 mm outer dia of pipe complete all as specified and directed.

M&L for run lead joint for CI pipes or specials suitable for 100 mm bore pipes incl spun yarn or any other consumable required at site including cleaning of old complete all as specified and directed.

All as per here-in-above item Srl No. 217, but size 80 mm bore

Material & labour for repairing of 80 mm dia sluice valve by opening for rectifying leakage, refacing, regrinding, replacement of galand packing, gasket, nut, bolt, washer, wheel and refixing in its original position after testing comeplete all as specified and directed.

Material & labour for repairing of 100 mm dia sluice valve by opening for rectifying leakage, refacing, regrinding, replacement of galand packing, gasket, nut, bolt, washer, wheel and refixing in its original position after testing comeplete all as specified and directed.

Material and labour for repairing of leakage of GI tube size from 25 mm bore to 50 mm bore dia at any location and any position by cutting /threading /jointing and including earth work etc incl GI fittings such as tee /socket/ elbow/reducer /nipple or as site requirement complete all as specified and directed.

Supply only Calcium Hypo Chlorine (55-65%) Chlorine content calcium based granular disinfectant (45 kg sealed drum ) for water treatment, much more stable than Chorine Gas, and stronger than bleaching powder & sodium hypochoride complete all as specified and directed.

M&L for cleaning of internal surface of 10000 Gallons capacity Steel PS OH tank installed at height of 40' to 50' by scraping with brush, rubbing down scales, dirt, sludge etc and washing with clear using bleaching powder/caustic soda and taking all rubbish from the tank and removing the same to a distance not exc 50 mtr and applying filling compound to fill joint gap internally including the writing of date of cleaning complete all as specified and directed.

Opening completely pressure filter & oxidation chamber of capacity up to 10000 GPH and taking out existing filter media (sand, gravells), stainers and nozzles, removing (except serviceable for reuse) and depositing filter media to a distance not exceeding 50 m including necessary repair/welding to make the pressure filter vessels complete leak proof for improving the strength and finally reassembling the pressure filter including filling of new strainer, gravells & sand in existing position duly cleaned complete after replacing worn out gasket and nut bolts and washers complete all as specified and directed. Note:- (i) New nozzles, stainers, gravells shall be measured and paid seperatley. (ii) Serviceable nozzles, stainers, gravells shall be reuse after cleaning and washing and rate for same is deemed to be included in the item quoted rate.

M&L for prepration of old painted steel/iron surfaces of pressure filter & oxidation chamber by scrapping and cleaning of internal surfaces and applying two coats of black bituminious anti corrosive paint suitable for drinking water and marking the date of cleaning on the body complete all as specified and directed.

Supply and fixing in repair of PVC push type/threaded type strainer suitable for filteration plant complete all as directed.

Supply and filling in layers special coarse sand suitable for use in filteration plant complete all as and directed as per following size:-

3.12 x 1.56 mm mesh

1.60 x 3.20 mm mesh

Supplying and filling in layers new washed, cleaned, dust free graded gravels filter media suitable for use in filteration plant complete all as directed for the following size:-

Gravel of grading 25 mm to 20 mm.

Gravel of grading 20 mm to 12 mm.

Gravel of grading 12 mm to 06 mm.

Gravel of grading 06 mm to 03 mm.

Supply and fixing in repair in layers mix of manganese dioxide (MnO2) and treated carbofil in lumps of size 20 mm to 15 mm containing 65% of manganese dioxide and 35% KG carbofil suitable for use in filltration plant complete all as directed.

Chemical Analysis (Turbidity,PH Total Hardness, Iron, Chloride, Suplhates, Fluorides, Nitrates , Calcium, Arsenic) of Raw water( before filteration) and filtered water (after filteration) for Pump Houses SFF at Doom Dooma from government labortory or NABL accredited labortory as per IS 10500 on quarterly basis, including collection of water sample and arrangements for sending the water to labortory,for testing and submission of the test report complete all as specified and directed. Note: For set of one borewell ( both after and before treating ) will be measured as one job and testing will be carried out on quarterly basis for each Pump House.

Supply and fix LED street light 45 W with minimum lumen of 4500Lm, PF >0.95 new generation energy saving and environmental friendly long life made up of pressure diecast aluminium housing with high power LED as lighting source cover having driver compartment with IP66 protection and impact resistance with built-in surge protection device suitable for mounting for pole complete including taking down of old complete all as specified and diected. Make : Crompton/ Philips/ GE.

Supply and fix LED street light 60 W with minimum lumen of 6000Lm, PF >0.95 new generation energy saving and environmental friendly long life made up of pressure diecast aluminium housing with high power LED as lighting source cover having driver compartment with IP66 protection and impact resistance with built-in surge protection device suitable for mounting for pole complete including taking down of old complete all as specified and diected. Make : Crompton/Philips/ GE.

Supply and fix LED Flood light 100 W with minimum lumen of 10000Lm, PF >0.95 new generation energy saving and environmental friendly long life made up of pressure diecast aluminium housing with high power LED as lighting source cover having driver compartment with IP66 protection and impact resistance with built-in surge protection device suitable for mounting for pole complete including taking down of old complete all as specified and diected. Make : Crompton/Philips/ GE.

Supply and fix in replacement of cable junction box IP 66 weather proof for outdoor installation (with metric knockouts for cable entry) size 205 x 255 x 112 mm suitable for 16/25 sqmm cable fixed to pole/ wall with suitable FI clamp 20X3 mm nuts , bolts and washers including provision of 01 No MCB, single pole, 240 volts, 10 KA 10 Amps, and suitable aluminium bus bar/ connector complete all as specified and directed.

Supply and fixing in replacement of PVC insulated and PVC round sheathed, copper conductor industrial cable 1.5 sqmm, 1100 volts grade, three core of copper conductor for connection of street light/ flood light/ post top lantern/ garden lights etc. fittings on pole/ wall/ pillar/ from over head conductor / junction box / DB including termination clip complete in all respect complete all as specified & directed.

Carrying out routine, preventive maint & servicing of DG set of under mentioned capacity, Make: Kirloskar in all respect like checking of diesel engine, multi cylinder and all safety devices, control panel by service engineer / service technician of any reputed service center/ auth service center of OEM periodicaly or on requirement basis and replacement of unserviceable spare parts/ accessories including calibration of control devices/ refitting of serviceable parts after cleaning/ servicing including minor consumables accessories like cotton, waste cloth, kerosene oil etc including draining of oil dust from foundation/ base plate complete all as specified and directed for the following under mentioned DG set:- (a) Check clearance of suction and exhaust valves including adjust, if required. (b) Changing of oil filter, fuel filters, water filter,screen filters assy, air filter etc. (c) Topping up of coolant & changing of hydraulic governer oil. (d) Tightening of all nut bolts including greasing of all points. (e) Checking of any leaking in fuel tank and oil lines. (f) Adjusting valve tappet clearance/timing, injector pressure test, cleaning and repairing,,tightining fasteners and making lubrication leak proof. (g) Repair/ rewiring of broken/ damaged control panel connection including measuring instruments, indicators, engine protection devices etc. Note . (a): Labour charges for dismantling/ taking down and replacement/ refixing parts as and when required is deemed to be included in unit item quoted rate. (b): Spare parts like oil filter, fuel filter, water filter, screen filter by pass filter, air filter etc will be measured and paid separately.

125 KVA DG Set Make: Kirloskar

62.5 KVA DG Set Make : Kirloskar

Supply only fuel filter assembly to the DG set of various capacities all as specified and directed for following DG set:- Note:- Labour charge for the same is paid under Schedule Sl item No. 236

125 KVA DG Set Make: Kirloskar

62.5 KVA DG Set Make : Kirloskar

Supply only air filter element to the DG set of various capacities all as specified and directed for following DG set:- Note:- Labour charge for the same is paid under Schedule Sl item No. 236

125 KVA DG Set Make: Kirloskar

62.5 KVA DG Set Make : Kirloskar

Supply only lubricating oil filter to the DG set of various capacitiesall as specified and directed for following DG set:- Note:- Labour charge for the same is paid under Schedule Sl item No. 06

125 KVA DG Set Make: Kirloskar

62.5 KVA DG Set Make : Kirloskar

S&F in replacement battery terminal cable, copper conductor with brass adaptor at both side of end point, multistrand, unsheathed, single core, 25 Sqmm, 1100 volts grade in length of 1.5 mtr long suitable for 12 Volts & upto 180 AH battery. Complete all as specified and directed.

M&L for taking out self starter 12 volt from the DG set, transportation to civil workshop and opening/ disconnecting all internal connection, cleaning the same taking out burnt armature, segrigation of serviceable parts for re-use, rewinding of armature with copper wire of existing size, assembling all parts, testing & fixing back to the DG set complete all as specified and directed.

S&F in replacement of fuel pipe to the DG set of various capacities complete including clip all as specified and directed.

S&F in replacement fan V belt to the DG set of capacities 125/62.5KVA all as specified and directed.

Supply & topping up heavy duty concentrate/ anti freeze radiator coolant complete all as specified. (Make-HP/ Servo/ Castrol)

Supply & topping up distilled water for batteries complete all as specified and directed.

S&F in replacement of rechargeable lead acid battery 12 Volt, 100 Ah heavy duty complete all as specified and directed.

Taking out unserviceable lubricant oil from engine chamber complete all as specified and directed.

Supply and filling lubricant oil 15w40 for topping up/replacement in engine chamber complete all as specified and directed. Make: Castrol/Volvoline/Servo/HP.

Material and labour for cleaning of fuel tank of DG Sets of 125/65 KVA capacities by taking out diesel in separate container, tank out of DG set, cleaning & removing all dirt/ sluge/ mud, dust, washing with fresh water thoroughly, drying and fixing back to its original location including making of all connection and re-filling of diesel in tank complete all as specified and directed.

M/S A K BROTHERS

M/S RK Trading