Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹4.2 Laccepted-aoc | ₹4.2 L | accepted-aoc |
Tender Value
₹4.2 L
EMD Value
₹11,000
Closing Date
23 Jul 2026, 9:30 pmClosed
Rural Development and Panchayat Raj Department
Executive Engineer PRE Division Kalaburagi
Construction of cultural hall near Neelkanth Kaleshwar temple at Kalgi town in Kalagi Taluka under MP LAD for the year 2024-25.
RDPR/2026-27/BD/WORK_INDENT26494/CALL-2
RDPR/2026-27/BD/WORK_INDENT26494/CALL-2
Open
Buildings
Electronic Documents, First(One Cover)
RDPR Division Office Kalaburgi
6 documents required · 6 mandatory
₹500
₹11,000
23 Jul 2026
15 Jul 2026
23 Jul 2026
Construction of cultural hall near Neelkanth Kaleshwar temple at Kalgi town in Kalagi Taluka under MP LAD for the year 2024-25.
Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...
Providing and laying in position Cement Concrete for levelling course for
all works in foundation. The granite/trap/basalt crushed graded coarse
aggregates and fine aggregates as per relevant IS Codes...
Providing Random rubble masonry with hard stone in foundation and
plinth including levelling up with cement concrete 1:6:12 (1 cement : 6
coarse sand : 12 graded stone aggregate 20 mm nominal size) up...
Providing Size Stone masonry with hard stone in foundation & plinth with
Cement mortar 1:6 (1 cement : 6 coarse sand) with all lead, lifts, loading & unloading charges, cost and conveyance of all mate...
Providing 18 mm cement plaster in two coats under layer 12 mm thick
cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm ( 0.05 ) total coated thickness with zinc coating 120 g/m...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Bid Document 11 Works 23 July 26.zip
Tender Document • 2.46 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .