Loading…
Loading…
Tender ID
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical | Accepted-Technical Qualified |
| 2 | Accepted-Technical | Accepted-Technical Qualified |
| 3 | Accepted-Technical | Accepted-Technical Qualified |
Tender Value
₹4 L
EMD Value
₹8,000
Closing Date
4 May 2026, 4:00 pmClosed
Executive Engineer Jal Shakti PHE Division Kathu
Executive Engineer Jal Shakti PHE Division Kathua
BOQ
2026_PHE_308523_4
enit 07 of 2026-27
Open Tender
Civil Works - Water Works
Percentage
25 days
Kathua
SBD
2 documents required · 2 mandatory
₹200
Executive Engineer Jal Shakti PHE Division Kathu
₹8,000
7 May 2026
24 Apr 2026
5 May 2026
24 Apr 2026
4 May 2026
24 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and laying in position cement concrete of specified grade including curing but
excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) | - | Cum | - | - |
| 2 | Providing and laying in position cement concrete of specified grade including curing but
excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) | - | Cum | - | - |
| 3 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone
aggregate) finished with a floating coat of neat cement including cement
slurry and curing complete, but excluding the cost of nosing of steps etc.
complete. 50 mm thick with 20mm nominal size stone aggregate | - | Sqm | - | - |
| 4 | Providing and applying crystalline mortar by mixing in the ratio of 4.5 :
1 (4.5 parts crystalline mortar : 1 part water) for the treatment of faulty
construction joints, cracks, tie rod holes and spalled &honeycombed
surface of RCC underground structures like basement, water tanks,
bridge deck etc. to ensure water tightness. The crystallie mortar shall
conform to the EN 1504-3 having compressive strength Class R4 > 45
MPa and adhesive bond strength Class R3 > 1.5 MPa. The work shall be
carried out all complete as per specification and the direction of the
Engineer-In-Charge. The product performance shall carry guarantee for
10 years against any leakage.
23.23.1 For sealing cracks and faulty construction joints, routed
out/making U-shape groove size 25x25mm and then primed the area
with integral crystalline slurry @0.05kg/ running metre and while the
surface is tacky filled the groove upto surface with crystalline mortar
@1.50kg/ running metre. Once crystalline mortar is touch dry then
finally applied two coats of integral crystalline slurry @0.05kg/running
metre per coat. | - | mtr | - | - |
| 5 | Providing and fixing double scaffolding system ( cup lock type ) on the
exterior side of building/ structure, upto 25 mtrs height above ground
level, including additional rows of scaffolding in stepped manner as per
requirement of site, made with 40mm dia M.S. tube, placed 1.5 mtr.c/c,
horizontal and vertical tubes joint with cup and lock system with M.s
tube, M.S tubes Challis M.S clamps and stairs case system in the
scaffolding for working platform etc. and maintaining it in a serviceable
condition of execution of work of cleaning and/ or pointing and/or
applying chemical and removing it their after the scaffolding system
shall be stiffened with bracings, runners connecting with the building
etc. where ever required. if feasible, for inspection of work at required
location with essential safety features for the work men etc, complete as
per directions and approval of Engineer-in-charge. | - | Sqm | - | - |
| 6 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work. | - | Sqm | - | - |
| 7 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m
in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and
ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as
directed: All kinds of soil. | - | Cum | - | - |
| 8 | Providing and laying in position cement concrete of specified grade including curing but
excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) | - | Cum | - | - |
| 9 | Providing and laying in position cement concrete of specified grade including curing but
excluding the cost of centring and shuttering. All work upto plinth level with:
1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) | - | Cum | - | - |
| 10 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete Welded. | - | Kg | - | - |
stage.html
html • 0.02 MB
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.92 MB
BOQ_999727.xls
BOQ • 0.34 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .