Renovation of A-Type Junior Engineer residences (06 Number) in Chhouch Canal colony in Distt. Lakhimpur-Kheri

Amount

Dismantling of existing plaster i/c disposal of refuse as directed by the engineer-in-charge within distance of 60m.

Dismantling door or window chaukhat including stacking of material as directed by the engineer-in-charge within distance of 60m.

Earth Work in excavation of foundation i/c lift upto 1.5m & lead upto 30 m with ramming and dressing by manualy etc complete .

C.C. 1:4:8 in foundation including all cost of material ,labour and T&P etc.

1st class brick work with 1:4 cement sand morter i/c all cost of material labour T&P etc required for proper completion of work.

Providing and fixing chowkhats in existing opening i/c embedding chowkhats in floor oldfasts embedding hold fastin i/c disposal of rubbish to the dumping ground with in 50m.

(i) Door Room

(ii) ,, BATH

(iii) ,, Window

(iv) ,, kitchen

(vi) ,, Varanda

Providing and fixing grill in window and venilation with Steel work welded in built up sections/ framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.all complete

Providing and fixing factory made flush door 40 mm thick. Including all cost of material labour & accessary with complete.

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. Flushing cistern, including all accessories fittings and fixtures complete, including cutting and making good the walls and floors wherever required:

Providing and laying RCC platform in kitchen 80mm thick and 80 cm wide beyond the wall as measured along the slope in cement mortar 1:4 including all cost of material etc complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to approved make in all colours,shades except burgundy,bottle green,black of any size as in skirting,risers of steps and dados over 12mm thick bed cement mortar 1:3 including all cost of material etc complete.

P/F stainless steel kitchen sink with C.l. Bracket excluding cost of other fittings. (b) Kitchen sink without drain board size 610x510x200mm

12 mm thick cement plaster in 1:4 cement coarse sand mortar finished in even and smooth. Including all cost of material labour and T&P etc .

Finnishing of wall with White wash i/c cost of all material labour and T&P etc .

Finishing wall with Distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour including all material, labour and T&P etc.

Finishing wall with water proofing cement paint of required shade old work on one or more coats applied over priming coat of of primer applied including all material , and labour etc complete.

Supply and fixing mosquito door in replesrment of old damaged shutter including all cost of material etc completion of work. .

Providing and fixing masquito Steel mesh ( jali ) in window including all material labour and T&P etc required for completion of work. .

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:

Enamel painting in two coat with cost of all labour, material and T&P for etc complete of work.

Plumbing work

Providing and fixing G.I. pipe class B complete with fittings & clamps including cutting and making good the surface of walls etc complete. Internal work

20 mm dia

25 mm dia pipe

Providing and fixing G.I pipe class B complete with fittings & refitting etc complete External work

65 mm dia

P/F in position best indian maker proper copper alloy gate valve and check valve (class -1 ) IS 778-1980 with iron wheel head etc complete.

25 mm dia

Fixing gun metal check or non return valve of all nominal bore. Item no 6

25 mm dia

P/F 15 mm nominal hole size C.P Stop cock

P/F 15 mm nominal hole size CP brass pillar each cocks

P/F in position C.P brass towel rail complete with brackets including making chases in wall and repairing the same in 1:3 cement mortar complete.

Fixing C.P. brass soap dish with C.P. brass brackets fixed towooden plugs, plastic sleeves with C.P. brass screws.

P/F C.P. Jali for Nahani Trap 100 mm dia including cost of all materials

P/F C.P. brass waste pipe for sink and wash basin 32 mm dia complete cost of all material, labour, T&P etc .

P/F C.P. copper pipe connection for sink wash basin cistern gyger etc with two nos C.P.nuts. .

P/F Indian type white glazed earthen ware 1 st quality ISI marked W.C. pan size 580 mm indian marke of approved quality including cost of all material .

P/F C.P. brass toilet paper holders including cost of all material,labour, T&P etc.

P/F 10 Lit. level flushing cistern(white vitreous china cly) of standard approved make complete with all accessories and fittings As per SOR chapter xviii item no 23

P/F wash basin with single hole/number of holes for pillar tap with C.I. or M.S. brackets painted white including cutting hole &making good the same but excluding fittings.

P/F pedestal for wash basin complete recessed at the back for the reception of pipes and fittings,

Providing fixing stainless steel kitchen sink with C.I bracket excluding cost of other fittings

Providing fixing sand cast iron spigot & socket soil waste drainage and ventilating pipe of the following nominal size (lead chaulked joints to be measured and paid separately 100 mm

Providing fixing chromium plated shower rose with 15 mm as 20mm inlet complete and 100 mm dia .

Electric wiring including alll fitting including all cost of labour ,material and T&P etc required for proper completion of work.

Wiring point for light with but in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor pipe on surface, complete with 14 SWG copper earth continuity wire,GP Box ,piano type switch and ceiling rose/angle/ batten holder on 3 mm. thick phenolic laminated backelite sheet etc. complete in all respect, as directed .

Wiring point for fan / fesh air fan (light duty exhaust fan) in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor concealed in the wall, complete with 14 SWG copper earth continuity wire,GP Box , piano type switch & ceiling rose on 3 mm thick phenolic laminated backelite sheet etc complete in all respect, including matching colour wash.

Wiring point for plug in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit concealed in the wall, complete with 14 SWG copper earth continuity wire,GP Box , piano type switch and socket etc. complete in all respect including matching colour wash.

Wiring point for call bell witin PVC conduit with 1.5 sq. mm.FRLSH PVC insulated copper conductor cable as earthwire drawn inside the conduitr cable in heavy guage rigid steel conduit pipe concealed in the wall, complete with 14 SWG copper earth continuity wire and piano type bell push or 2 pin socket etc., complete in all respect including matching colour wash.

Wiring point for exhaust fan with in PVC conduit with 1.5 sq. mm. F.R. insulated multistrand copper conductor concealed in the wall, complete with 14 SWG copper earth continuity wire, GP Box , 15 A piano type switch and ceiling rose on 3 mm thick phenolic laminated backelite sheet etc. complete in all respect including mathcing colour wash. As per PWD SOR electric work CODE 175(C ) P-64

Wiring point for H.P.M.V./ Sodium Vapour lamp with in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor concealed in the wall, complete with 14 SWG copper earth continuity wire and 15 A piano type switch etc. complete in all respect including matching colour wash.

Supply and fixing of fan hook fabricated from M.S. rod for ceiling fan each. As per PWD SOR electric work CODE 1123) P-179

S&F of 32 Amp. 240 V SPN metal clad rewireable type switch fuse unit on M.D.F.E.G. / Teak wood board complete in all respects. As per PWD SOR electric work Chapter-3 code 302 P-100

S&F of 32 Amp. four pole change over switch on 25mm x 25mm x 3mm angle iron frame, including the cost of labour, T&P, painting and other material required for proper completion of the work as per direction and satisfaction of Engineer in charge. As per PWD SOR electric work Chapter-3 code 376 P-104

S&F surface/flush mounting 4 ways SPN distribution board without MCB complete in all respect,as directed at site by Engineer in charge.As per PWD SOR electric work Chapter-10 code 1022 P-170

S&F of 6 Amp. to 32 Amp. DP MCB (10 KA) C Curve. As per PWD SOR electric work Chapter-10 code 1009 P-167

Supply and fixing of 15A 240 Volts I.C. cut out of approved make on the Metre board or polished MDFEG / Teak ply board. complete in all respect. As per PWD SOR electric work Chapter-11 code 1111 P-178

Supply and fixing of power plug with 20 Amp./250 volt flush type modular switch and 5 pin 20 A/250 volt flush type universal modular socket switch on concealed M.S box including supply of all material, labour T&P etc. required for proper completion of work. As per PWD SOR electric work Chapter-11 code 1139(A) P-181

Supply and fixing of recess/ Surface/ Pendent mounting round 6 Watt 8 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. As per PWD SOR electric work Chapter-14 code 1401 P-193

Supply and fixing of recess/ Surface/ Pendent mounting round 10 to 15 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. As per PWD SOR electric work Chapter-14 code 1402 P-193

Dismentling old damaged floor including stacking of material within a distance of 60m including all cost of labour ,material and T&P for proper completion of work.

25 mm thick P.C.C. 1:2:4 layed in one layer finished with flooring cost of neat cement including all cost of labour, material and t&p etc required for proper completion of work.

Dismentling of Roof floor including stacking of material within a distance of 60m including all cost of labour ,material and T&P for proper completion of work.

50 mm thick Cement concret on roof with stone ballast & murga jali including cost of material 1/m²

Providing and fixing hollow pipe for perlins including all cost of labour,material and t&p etc required for proper completion of work.

Providing and fixing G.C,sheet (tin shed) on roof with ISI mark including all cost of labour material and t&p etc required for proper completion of work.

Brick soling with straight over burnt brick laid on edge and dry brick edging on both side including preparation of sub-grade to prescribed camber ,filling joint with local earth spreading, a binding coat of 1 cm of local earth or sand i/c all labour T&P retc equired for proper completion of work.

Jagat Construction