Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.0 LAccepted-AOC AT RAMPUR COLLIERY BRAJRAJNAGAR DIST JHARSUGUDA ODISHA 768216 | BRAJRAJNAGAR | JHARSUGUDA | ODISHA | 768216 | L1 | Accepted-AOC The amount quoted by single eligible bidder M/s Light Palace is 5.00 percent above the estimated cost / 4.21 percent above the updated cost. |
Tender Value
₹2.8 L
EMD Value
₹3,600
Closing Date
21 Apr 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Vijay Kumar Staff Officer(EnM) Lakhanpur Area
Vijay Kumar Staff Officer(EnM) Lakhanpur Area GM Office Bandhabahal Dist-Jharsuguda Odisha-768211 Mob-9437595715
Power supply for installation of continuous Ambient Air quality Monitoring station for Lakhanpur OCP, Lakhanpur Area, MCL
2023_MCL_276989_1
MCL/LKPA/EnM/eNIT/23-24/01 dt-04.04.2023
Open Tender
Electrical and Maintenance Works
Item Rate
30 days
Lakhanpur OCP, Lakhanpur Area
Please refer Tender documents.
4 documents required · 4 mandatory
₹3,600
Yes
30 Jun 2023
4 Apr 2023
24 Apr 2023
4 Apr 2023
21 Apr 2023
5 Apr 2023
4 Apr 2023 - 10 Apr 2023
Amount
Erection of RCC/PCC pole of above 8mtr and upto 11 mtrs in brick ballast and ramming the foundation, finishing with 150 mm thick cement concret 1:3:6 layer on top with including excavation and refilling etc as required
Supplying and erection of galvanised stay set for 11 KV over head lines complete with 19/ 20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm thick, thimble, stay clamps, turn buckle ( 20 mm X 600 mm ), 7/ 4.00 mm dia G.I. stay wire and 11 KV strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.
Erection of pole top/ straight two wire/ V shape two wire, angle iron/ channel iron, cross arm on steel tubular/ rail/ PCC pole for 11/22/33 KV as required.
Erection of all aluminium conductor of 7/1.96 mm to 7/3.10 mm diameter including binding etc. as required.
Supplying and erection of 11 KV disc insulator for 11 KV over head lines with galvanised insulator fittings, ball and socket type and complete with galvanised strain clamps, bolts, nuts, washers etc. as required.
Supplying and erection of 11 KV pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required.
Supplying and erection of three piece nonlinear resistor type lightning arrestor suitable for 3 wire, 11 KV overhead lines with rated voltage 9 KV (rms) with a nominal discharge current rating of 5 KA and complete with galvanised clamping arrangement, G.I. bolts, nuts, washers etc. as required.
Supplying of two lengths of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) double pole cross arm for three wire 11KV over head line conductors complete with through bolts and nuts for clamping to the poles, 50 mm X 6 mm M.S. flats welded on one side to the channel iron and with bolts and nuts on the other side for tying the cross arms together, including drilling holes for insulator pins/ fittings, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required .
Erection of double pole 3 wire cross arm for 11KV/ 22KV/ 33 KV over head lines as required.
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.
Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) V shape cross arm for two 11 KV over head line conductors complete with 50 mm X 6 mm M.S. flat, iron clamps, bolts and nuts including drilling holes for insulator pins, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required.
Supply of 9mtr length PSC Pole, Working Load-415 kg, Concrete Grade-M420, The Poles shall comply with latest standards as under:REC Specification No. 15/1979, REC Specification No. 24/1983, IS 1678, IS 2905, IS 7321
Supply and fixing of 11KV 100 amp two phase single break flat type GOAB switch (Horizontal ) complete sets with nut bolts , drill holes, gas cutting and necessary arrangments.
Supply and fixing of 11KV grade, 100A two phase two phase DO fuse complete with nut, Bolt drill holes, gas cutting and necessary arrangments.
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. - All kinds of soil.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. - 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
Structural steel work riveted bolted or welded in build up sections , trusses and framed work, including cutting , hoisting fixing in position and applying a priming coat of approved steel primer all complete.
Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 metres (minimum), between the two posts fitted and fixed with G.I.staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for serarately) :- Payment to be made per metre cost of total length of barbed wire used.-With G.I. barbed wire
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. - Two or more coats on new work.
Supplying and stacking at work site hard granite equivalent as approved by ELC, hand broken stone metal 63mm to 45mm size, i.e., IRC G-II of approved quality including screening and stacking along road side equidistantly and uniformly including royalty octroi and all other taxes complete with all leads and lifts (A deduction of 7.5% is to be made on accounts of voids in stone metal measurement of material is to be taken just before laying work starts and payment shall be made only after laying of materials)(7.5cum X 92.5%)
Supply of 10 KVA distribution transformer 11/0.23KV, (BEE1 star rating with BIS level-II ), 2 phase oil cooled distribution transformer with fittings and accessories, IS specification number 1180(Part-I), 2014.
Installation and comissioning of 10 KVA , 11/0.23KV ditribution transformer
Insepction fee for line and sub station with drawing approval
Supply of 63Amp , 415 Volt triple pole with neutral link main swicth in sheet enclosure , powder coated proofed confirming to IS 13947(Part-3) 1993 with re wirable procelain fuse unit
Testing , comissioning and fixing of 63 Amp 415Volt TPN main swicth connections etc as required
Supply of 3.5 core x 35 sqmm, 1.1KV Grade alluminium armoured XLPE PVC cable
Laying of LT PVC Cable on pole etc as required
Total impact of GST for the purpose of CTC
stage.html
html • 0.03 MB
techsummary_286750.pdf
PDF • 0.44 MB
finsummary_286750.pdf
PDF • 0.38 MB
LOA01.pdf
PDF • 0.50 MB
BOQ Comparative Chart
xlsx • 0.01 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .