Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.9 LAccepted-AOC | ₹2.9 L | L1 | Accepted-AOC Thiru. Abuthahir has been quoted lowest rate of 0.15 percentage below from the estimate rate and his rate has been approved. |
| 2 | L2₹3.1 L+₹17,000 (5.85%)Rejected-Finance | ₹3.1 L+₹17,000 (5.85%) | L2 | Rejected-Finance Thiru.P. Rasheed has quoted lowest rate of 5.70 percentage above from the estimate rate. |
| Sl No | Description | Qty | Unit | P RASHEED | Abuthahir |
|---|---|---|---|---|---|
| 1.00Supply and delivery of following dia of G.I. pipes medium class and the rate including etc complete complying with standard specifications | |||||
| 1.01 | 50mm dia | 1,200 | Rm | 2,94,000 ₹3,46,920 | 2,77,200 ₹3,27,096 Lowest |
| 2.00 | Supply and delivery of Open well Submersible pump set conforming to IS 14220 /2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rod as per IS 613/1984 with ISI mark. The pump suitable for installation in sump with 1.1KV grade 3 core suitable copper flat submersible cable to a length of 15m with necessary cable joints. The non-return valve located at the top of the pump in the discharge outlet connection is to be designed with minimum friction. The pump should be directly coupled to 2880 RPM, three phase, 50 Hz (±5), 415V+6% & 415V-15% squirrel cage induction motor suitable for DOL upto 5 HP, Fully Automatic Air break Star Delta up to 20 HP and Auto Transformer starter for above 20 HP starting and for continuous operation. (200lpm x 125m) | 1 | No | 420 ₹495.6 | 400 ₹472 Lowest |
| 3.00 | Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days. | 1 | No | 365 ₹430.7 | 350 ₹413 Lowest |
| 4.00 | Laying of G.I. Pipes and specials to proper line and level including jointing but excluding cost of pipes and jointing materials for plumbing works for providing water supply
and sanitary works | 1,200 | Rm | 38,400 ₹45,312 | 36,000 ₹42,480 Lowest |
Tender Value
Refer Docs
EMD Value
₹4,000
Closing Date
10 Sept 2025, 3:00 pmClosed
Executive Officer
Devarshola Town Panchayat Office, Devarshola Post, The Nilgiris - 643207
15th Finance - Tied Grant - 2025-2026 - Providing Pipe line at 8th Mile in Ward No.7
2025_DTP_598665_1
292/2025/A1-2
Open Tender
Civil Works
Works
120 days
Devarshola Town Panchayat Office
15th Finance - Tied Grant - 2025-2026 - Providing Pipe line at 8th Mile in Ward No.7
2 documents required · 2 mandatory
₹0
₹4,000
Yes
16 Sept 2025
29 Aug 2025
10 Sept 2025
29 Aug 2025
10 Sept 2025
29 Aug 2025
29 Aug 2025 - 10 Sept 2025
Supply and delivery of following dia of G.I. pipes medium class and the rate including etc complete complying with standard specifications
50mm dia
Supply and delivery of Open well Submersible pump set conforming to IS 14220 /2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rod as per IS 613/1984 with ISI mark. The pump suitable for installation in sump with 1.1KV grade 3 core suitable copper flat submersible cable to a length of 15m with necessary cable joints. The non-return valve located at the top of the pump in the discharge outlet connection is to be designed with minimum friction. The pump should be directly coupled to 2880 RPM, three phase, 50 Hz (±5), 415V+6% & 415V-15% squirrel cage induction motor suitable for DOL upto 5 HP, Fully Automatic Air break Star Delta up to 20 HP and Auto Transformer starter for above 20 HP starting and for continuous operation. (200lpm x 125m)
Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days.
Laying of G.I. Pipes and specials to proper line and level including jointing but excluding cost of pipes and jointing materials for plumbing works for providing water supply and sanitary works
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .