SOPD_G_24_25_26 (i) Construction of Earthen Roads inside the Bhattadev Khetra,(ii) Construction of Helipad, Barricade and Approach Roads for proposed Helipad (iii) Construction of Old NT Link Road ,(iv) Construction of Road from MRL 20 (NH 31 at Bir

Amount

(i) Construction of Earthen Roads inside the Bhattadev Khetra Single bamboo spur and palisading of whole 2nd class bamboo (jati or Bethua) 65 mm to 75 mm dia and closely packed & driven, including fitting, fixing with half bamboo kamis horrizontally in three rows with cane or tying wire complete and struts 1500 mm apart longitudinally and providing brush wood as per drawing and technical specifications Clause 1302.5 (ii) Driven at least 900 mm below ground and 900 mm above ground on average.

Supplying and installation and placing empty cement bags filled with Sand and stitching with coir string and pitching or dumping at affected places as directed ( Cost of all materials born by the contractor at his own cost )

Construction of embankment with approved materials obtained from borrow pits with a lift upto 1.5m transporting to site, spreading, grading to required slope and compacting to meet requirement of Table 300.1 and 300.2 with a lead upto 1000m as per Technical Clause 301.5 ,

Construction of Sub-Grade and earthen shoulders with approved materials obtained from borrow pits with all lifts and leads, transporting to site spreading grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per technical Specification Clause 303.1, (400.00 mX 6.476 sqm = 2590.40 cum),(500.00 mX1.56.00 sqm=780.00 cum) (a) From Private Land

Construction of Granular Sub-Base by providing well graded material, spreading in uniform layers by tractor with grading attachment on prepared surface, mixing by mix in place method with rotavatorat OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401,for Grading-II Material

(ii) Construction of Helipad, Barricade and Approach Roads for proposed Helipad Clearing and grubbing road land including uprooting wild vegetation, grass, bushes,shrubs, saplingsand trees grithupto 300mm, removal of stumpsof such trees cut earlier and disposal of unservicable materials and stacking of serviceable to be used or auctioned , upto a lead of 1000m including removal and disposal of top oraginic soil not exceeding 150mm in thickness as per T echnical Specification Clause 201. By manual Means. (A)In area of non- throny jungle .

Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 (I) Private Land

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.

Barricadeing Work Making Bamboo Barricade with Jati Bamboo post at the rate 2.00 m interval 0.60 m below ground and 1.95 m above ground firmly errected at ground with horizontal protection bar two rows tied firmly with coir string and white washing complete in all respect as directed by the department (Qntty as per Annex-D)

iii) Construction of Feeder Road to Old NT Road Clearing and grubbing of road land including up rooting rank vegetation grass,bush, shurbs saplings and trees of girth upto 300mm removal of stumps of trees cut earlier and disposal of unseviceable materials & stacking of serviceable material to be used or auctioned, upto a lead of 1000m including removal & disposal of top organic soil not exceeding 150mm in thickness.(I) By manual Means- (b) In area of thorny jungle

Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and comp g actin to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 a) Private Land

Construction of sub-grade and earthen shoulders construction of sub grade and earthen shoulders with approved materials obtained from borrow pits with all lifts and leads, transporating to site, spreading, grading to required slope and compacting to meet required of table 300.2 with lead upto 1000m as per technical specification clause.(a) Private Land

(A) By mix in place Method -Construction of granular sub base by providing well graded material, spreading in uniform layers with motor grader on prepare surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification clause 401. (ii) For Grading Material (Gr-II)

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. A) By Manual Means (a) Private Land Using stone screening Type-B 11.2 mm for Gr.III

Providing and laying interlocking concrete block pavement (M40) having thickness 80mm as per technical specification clause 1504 complete including carriage.

I Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M- 15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing Clause 1701.2.2 ii) 600mm equilateral triangle

I Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M- 15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing Clause 1701.2.2 iii) 600mm circular

I Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M- 15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing Clause 1701.2.2 iv) 800mm x 600mm rectangular

Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 ii)Ordinary Kilometer Stone (Precast)

iv) construction of road from MRL -20 (NH-31 at Birkola Chowk to Niz Sariah) to Assam Sahitya Sabha Sthali Link-1 ( 50.00+50.00 m), Link-2(520.00m), Link-3 (250.00 m), Link-4 (620.00 m) & Link-5 (110.00 m) Clearing and grubbing of road land including up rooting rank vegetation grass,bush, shurbs saplings and trees of girth upto 300mm removal of stumps of trees cut earlier and disposal of unseviceable materials & stacking of serviceable material to be used or auctioned, upto a lead of 1000m including removal & disposal of top organic soil not exceeding 150mm in thickness.(I) By manual Means- (b) In area of thorny jungle

Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and comp g actin to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 a) Private Land

Construction of sub-grade and earthen shoulders construction of sub grade and earthen shoulders with approved materials obtained from borrow pits with all lifts and leads, transporating to site, spreading, grading to required slope and compacting to meet required of table 300.2 with lead upto 1000m as per technical specification clause.(a) Private Land

(A) By mix in place Method -Construction of granular sub base by providing well graded material, spreading in uniform layers with motor grader on prepare surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification clause 401. (ii) For Grading Material (Gr-II)

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. A) By Manual Means (a) Private Land Using stone screening Type-B 11.2 mm for Gr.III

Providing and laying interlocking concrete block pavement (M40) having thickness 80mm as per technical specification clause 1504 complete including carriage.

I Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M- 15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing Clause 1701.2.2 ii) 600mm equilateral triangle

I Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M- 15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing Clause 1701.2.2iii) 600mm circular

I Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M- 15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing Clause 1701.2.iv) 800mm x 600mm rectangular

Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 ii)Ordinary Kilometer Stone (Precast)

v)Construction of Ramp cum Road to Asom Sahitya Sabha Clearing and grubbing road land including uprooting wild vegetation, grass,bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of l000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201. i) By Manual Means (A) Non Thorny

Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 (i) Private Land

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1. (i) Private Land

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. (ii) For Grading II Material

Water Bound Macadam (Providing , laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 Kn in stages to proper grade and camber, applying and brooming stone creening/binding materials to fill up the interstices of coarse ggregate, watering and compacting to the required density Grading-III asper Technical Specification Clause 405 A. By manual means (iii) Grading -III (Using screening crushable type such as Moorum or gravel) (b) Using Screening Type-B (11.2 mm aggregate)

(i) Providing and laying Interlocking Concrete Block pavement (M40) having thickness 80 mm as per Technical Specification Clause 1504 complete including carriage…(b) Excluding Edge Block/ Edge Restrain

Scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3.0m and lead upto 1000 m as per Technical Specification Clause 301.4.

Providing 1.40 m width and 10.00 m long steel plate over existing drain for paasing the loaded truck from main entrance…from item no M098 of SOR_ 20 mm thick

vi) Construction of Road from Malipara Barpakhuripar to Dangarpar road Clearing and grubbing road land including uprooting wild vegitation, grass,shurbs,spalling and tree girth up to 300mm, removal of stumps such trees cut earlier and disposal of unservisable materials------as technical specification clause 201.

Construction of embankment with approved materials obtain from borrowpits with all lift and lead transporting to site, speradig , grading to reuired slope and copecting to meet requirment of table 300.1 and 300.2 with a lead upto 1000m as as per technical specification clause 301.5 (1)Private land. ( As per Statement-1)

Construction of sub-grade and earthen shoulder with approved materials obtain from borrow pits with all lift and lead, transporting to site, speradig , grading to areuired slope and copected to meet requirment table 300 -2 with lead up to 1000.00 m as per technical specification clause 303.1 ( 1)Private land. ( As per Statement-1)

Construction of Granular sub-base by providing well graded material spreading in uniform layers with motor grader on prepared surface,mixing by mix in place method at OMC with tr rotavator and compaction with three wheel 80-100 Kn capacity to achieve desired density as per specification clause-401.

Providing, laying,spreading and compacting stone aggregates of specific sizes to water Bound Macadam Specification including spreding in uniforom thickness, hand packing,rolling with smooth wheel roller 80-100KN in stage to proper grade and camber,applying and brooming,stone screening to fill up intersticesof coursce aggrigate, watering and compecting to the required density Gr-iii as per technical specification clause- 405 (A) By manual means .(i) Using stone screening Type-B 11.2mm. Gr.-iii

Providing and laying inter locking concrete block pavement having thickness 80 mm as technical specification clause 1504.(Inclusive of edge restrain and carriage)

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801 iv)600mm equilateral triangle

Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges.The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1

Kilo Metre Stone (Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8, fixing in position including painting and printing etc) Ordinary K.M. Stone-(ii)

Kilo Metre Stone (Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8, fixing in position including painting and printing etc) Ordinary K.M. Stone-(iii)

Hume Pipe Earth work in exacavation for structure up to depth of 3.00m as per drawing and technical specification clause 1104 including setting out, construction of shoring and bracing, removal of stumps and deletarious materials , dressing of sides and bottom and back filling in trenches with excavated suitable materials.

PCC 1:3:6 in Foundation. Providing plain/reinforced concrete in open foundation as per drawing and technical specification clause 802,803,1202 and 1203. (A)with crushed stone. (1)Nominal mix 1:3:6

Laying (First class) bedding well compected approved granular materials as per clause1105 (ii)

Providng and laying RCC hume pipe NP3 for culvert in single row including fixing coller with cement morter 1:2 but excluding excavation, protection work, backfilling,concrete and masonary works in head and parapet wall(B) 1000mm dia.

Providng and laying RCC hume pipe NP3 for culvert in Double row including fixing coller with cement morter 1:2 but excluding excavation, protection work, backfilling,concrete and masonary works in head and parapet wall(B) 1000mm dia.

Providing plain/reinforced concrete in open foundation as per drawing and technical specification.(1) PCC -M20, Nominal Mix-1:2:4

vii) Construction of Car Parking Approach Road (Raibahadur Road) Construction of embankment with material obtained from borrow pits, construction of embankment with approved materials obtained from borrow pits with a lift up to 1.5m, transporating to site, spreading, grading to required slope and compacting to meet required of tables 300.1 and 300.2 with a lead upto 1000m as per technical specification clause. (a) Private Land

Construction of sub-grade and earthen shoulders construction of sub grade and earthen shoulders with approved materials obtained from borrow pits with all lifts and leads, transporating to site, spreading, grading to required slope and compacting to meet required of table 300.2 with lead upto 1000m as per technical specification clause. (a) Private Land

viii) Construction of Hari Dev Path Clearing and grubbing of road land including up rooting rank vegetation grass,bush, shurbs saplings and trees of girth upto 300mm removal of stumps of trees cut earlier and disposal of unseviceable materials & stacking of serviceable material to be used or auctioned, upto a lead of 1000m including removal & disposal of top organic soil not exceeding 150mm in thickness. (I) By manual Means- (a) In area of non thorny jungle

Construction of embankment with material obtained from borrow pits, construction of embankment with approved materials obtained from borrow pits with a lift up to 1.5m, transporating to site, spreading, grading to required slope and compacting to meet required of tables 300.1 and 300.2 with a lead upto 1000m as per technical specification clause. (a) Private Land

Construction of sub-grade and earthen shoulders construction of sub grade and earthen shoulders with approved materials obtained from borrow pits with all lifts and leads, transporating to site, spreading, grading to required slope and compacting to meet required of table 300.2 with lead upto 1000m as per technical specification clause. (a) Private Land

(A) By mix in place Method -Construction of granular sub base by providing well graded material, spreading in uniform layers with motor grader on prepare surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification clause 401. (ii) For Grading Material (Gr-II)

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. (A) By Manual Means

Providing and laying interlocking concrete block pavement (M40) having thickness 80mm as per echnical specification clause 1504 including carriage. a) including Edge block/Edge restraints

Providing and fixing retro reflectorised cautionery, mandatory and informatory sign as per IRC:67 made encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting 1.5 mm thick supported on a mild steel angle iron post 75mmx 75mmx 8mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concreyte 450mmx450mmx600mm below ground level as per drawings and technical specification Clause 801. 800mm x 600mm rectangular

(ix) Construction of Old NT road To Raipur Birkola Link-1 ( 200.00 m), Link-2(100.00m), Link-3 (50.00 m) Clearing and grubbing of road land including up rooting rank vegetation grass,bush, shurbs saplings and trees of girth upto 300mm removal of stumps of trees cut earlier and disposal of unseviceable materials & stacking of serviceable material to be used or auctioned, upto a lead of 1000m including removal & disposal of top organic soil not exceeding 150mm in thickness.(I) By manual Means- (b) In area of thorny jungle

Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and comp g actin to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 a) Private Land

Construction of sub-grade and earthen shoulders construction of sub grade and earthen shoulders with approved materials obtained from borrow pits with all lifts and leads, transporating to site, spreading, grading to required slope and compacting to meet required of table 300.2 with lead upto 1000m as per technical specification clause. (a) Private Land

(A) By mix in place Method -Construction of granular sub base by providing well graded material, spreading in uniform layers with motor grader on prepare surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification clause 401. (ii) For Grading Material (Gr-II)

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. A) By Manual Means Using stone screening Type-B 11.2 mm for Gr.III

Providing and laying interlocking concrete block pavement (M40) having thickness 80mm as per technical specification clause 1504 complete including carriage.

I Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M- 15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing Clause 1701.2.2 ii) 600mm equilateral triangle

I Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M- 15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing Clause 1701.2.2 iii) 600mm circular

I Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M- 15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing Clause 1701.2.2 iv) 800mm x 600mm rectangular

Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 ii)Ordinary Kilometer Stone (Precast)

Single Hume pipe culvert ,600.00 mm dia Earth work in excavation of foundation for structure as per drawing and technical specification Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and deleterious material and disposal upto a lead of 50m. dressing of sides and bottom and backfilling in trenches with excavated suitable material. 1. Ordinary soil (i) Upto 3 m depth

PCC M15 in Foundation Providing concrete for plain / reinforced concrete in open foundations complete as per drawings and technical specification clause 802,803,1202 & 1203. A. With crushed stone II PCC grade M10 Nominal mix (1:3:6)

Bedding for Pipe Laying concrete cradie bedding with M15 Grade Cement Concrete as per Clause 1105 (i)

Providing concrete for plain / reinforced concrete in sub structure complete as per drawings and technical specification clause 802,803,1202 & 1203. A. With crushed stone II PCC grade M20 Nominal mix (1:2:5:5)

Plstering Plastering with cement mortar ( 1:4 ) 15mm thick on brick work in substructure as per technical specification Rate.

Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106. 600 mm dia

(x) Construction of Road from Old NT Road (Near NT Top Furniture) to Raipur (L=170.00 m) Clearing and grubbing road land including uprooting wild vegetation, grass,bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of l000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201. i) By Manual Means (A) Non Thorny

Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 (i) Private Land

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. (ii) For Grading II Material

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801600mm equilateral triangle

(xi) Construction of Harendra Nath Deka Path (L=200.00 m) Clearing and grubbing road land including uprooting wild vegetation, grass,bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of l000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201. i) By Manual Means (A) Non Thorny

Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 (i) Private Land

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. (ii) For Grading II Material

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801 600mm equilateral triangle

(Xii) Construction of Road from Pathsala Sikhapith to brick field with a Bamboo Foot Bridge(30.00m) Clearing and grubbing road land including uprooting wild vegetation, grass,bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of l000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201. i) By Manual Means (A) Non Thorny

Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 (i) Private Land

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1. (i) Private Land

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. (ii) For Grading II Material

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. (A) By Manual Means

ICBP:: Providing and laying interlocking concrete block pavement (M400 having thickness 80 mm as per technical specification clause 1504 complete including carriage…. (a) Including edge block/ edge restrain

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801 600mm equilateral triangle

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801 600mm circular

Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1

Construction of temporary Bamboo bridge of 3.70m clear road way with Bholuka or Barua Bamboo post 5nos. in each rows driven at least180cm. below ground level and rows not more than 150cm apartfrom center to center Bholuka or Barua Bamboo dham longitudinal groth both closely placed and tied with half bamboo 90cm to 120cm apart in both layers and ttwo layers of jati bamboo chattais ( top layer should be digonally woven), 70 mm to 100 mm thick brushwood in between chattias should be tied with half jati bamboo on both ends, bamboo railing with bholuka or barua bamboo post placed at150cm apart jati or betua bamboo hand rails of two lines both side of every alternate rows.All tying must be done with cane or coir string and only mature bamboo should be used in work.

(Xiii) Construction of Pathsala Sikhapith Approach Road to Sabhastali Clearing and grubbing of road land including up rooting rank vegetation grass,bush, shurbs saplings and trees of girth upto 300mm removal of stumps of trees cut earlier and disposal of unseviceable materials & stacking of serviceable material to be used or auctioned, upto a lead of 1000m including removal & disposal of top organic soil not exceeding 150mm in thickness. (I) By manual Means- (a) In area of non thorny jungle

Construction of embankment with material obtained from borrow pits, construction of embankment with approved materials obtained from borrow pits with a lift up to 1.5m, transporating to site, spreading, grading to required slope and compacting to meet required of tables 300.1 and 300.2 with a lead upto 1000m as per technical specification clause. (a) Private Land

Construction of sub-grade and earthen shoulders construction of sub grade and earthen shoulders with approved materials obtained from borrow pits with all lifts and leads, transporating to site, spreading, grading to required slope and compacting to meet required of table 300.2 with lead upto 1000m as per technical specification clause. (a) Private Land

(A) By mix in place Method -Construction of granular sub base by providing well graded material, spreading in uniform layers with motor grader on prepare surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification clause 401. (ii) For Grading Material (Gr-II)

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. (A) By Manual Means

Providing and laying interlocking concrete block pavement (M40) having thickness 80mm as per echnical specification clause 1504 including carriage. a) including Edge block/Edge restraints

Providing and fixing retro reflectorised cautionery, mandatory and informatory sign as per IRC:67 made encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting 1.5 mm thick supported on a mild steel angle iron post 75mmx 75mmx 8mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concreyte 450mmx450mmx600mm below ground level as per drawings and technical specification Clause 801. 800mm x 600mm rectangular

(xiv) Installation of Road Signages and Beautification Work Road Markers/Road Stud with Lens ReflectorProviding and fixing of road stud 100 x 100 mm die cast in aluminium, resistant tocorrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling holes 30 mm upto a depth of 600 mm and bedded ina suitable bituminous grout or epoxy mortar, all as per BS:873 (Part 4) 1973.

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801 600mm equilateral triangle

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801 600mm circular

White washing of parapet walls of CD work and tree truncksWhite washing two coats on parapet walls and tree trunks including preparationof surface by cleaning scraping etc. as per technical specifications Clause 1915

(Xv) ELECTRONIC ITEMS AND FURNITURE WORK OF PATACHARKUCHI IB, PWD AT BAJALI BLOCK Supplying and assembling of Double bed of approved brand including fitting with all accessories complete as directed by the Engineer-in-charge

Supplying and assembling of Single bed of approved brand including fitting with all accessories complete as directed by the Engineer-in-charge

Supplying and installation of Steel almirah of approved brand including fitting with all accessories complete as directed by the Engineer-in-charge

Supplying and assembling of Dining Table(6 seater) of approved brand including fitting with all accessories complete as directed by the Engineer-in-charge

Supplying and assembling of 2 seater sofa of approved brand including fitting with all accessories complete as directed by the Engineer-in-charge

Supplying a and assembling of 3 seater sofa of approved brand including fitting with all accessories complete as directed by the Engineer-in-charge

Supplying and assembling of Centre table of approved brand including fitting with all accessories complete as directed by the Engineer-in-charge

Supplying and assembling of Book Rack of approved brand including fitting with all accessories complete as directed by the Engineer-in-charge

Supplying of Blanket of approved brand as directed by the Engineer-in-charge

Supplying of chair of approved brand including fitting with all accessories complete as directed by the Engineer-in-charge

Supplying and installation of Curtains of approved brand including fitting with all accessories complete as directed by the Engineer-in-charge

Supplying and installation of Reading Table of approved brand including fitting with all accessories complete as directed by the Engineer-in-charge

Supplying of Double bedsheet of approved brand as directed by the Engineer-in-charge

Supplying of Single bedsheet of approved brand as directed by the Engineer-in-charge

Supplying of Dressing table of approved brand including fitting with all accessories complete as directed by the Engineer-in-charge

Supplying and installation of Gas stove of approved brand including fitting with all accessories complete as directed by the Engineer-in-charge

Supplying and installation of Kitchen rack of approved brand including fitting with all accessories complete as directed by the Engineer-in-charge

Supplying and installation with testing and commissioning of Microven of approved brand including fitting with all accessories complete as directed by the Engineer-in-charge

Supplying of Pillow cover of approved brand as directed by the Engineer-in-charge

Supplying of Pillow of approved brand as directed by the Engineer-in-charge

Supplying and installation with testing and commissioning of Refrigerator of approved brand including fitting with all accessories complete as directed by the Engineer-in-charge

Supplying and assembling of 1 seater sofa of approved brand including fitting with all accessories complete as directed by the Engineer-in-charge

Supplying and installation of Water purifier of approved brand including fitting with all accessories complete as directed by the Engineer-in-charge

Supplying and installation of Wall clock of approved brand as directed by the Engineer-in-charge

Supplying of Door mat of approved brand as directed by the Engineer-in-charge

Supplying of Double mattress of approved brand as directed by the Engineer-in-charge

Supplying of Single mattress of approved brand as directed by the Engineer-in-charge

Supplying of Dining mat of approved brand as directed by the Engineer-in-charge

Supplying and installation with testing and commissioning of Geyser of approved brand including fitting with all accessories complete as directed by the Engineer-in-charge

Supplying and installation of Electric kettle of approved brand including fitting with all accessories complete as directed by the Engineer-in-charge

Supplying and installation with testing and commissioning of Washing Machine of approved brand including fitting with all accessories complete as directed by the Engineer-in-charge

Supplying & commissioning of Electric Bell of approved brand including fitting with all accessories complete as directed by the Engineer-in-charge

Supplying and installation of Chandelier of approved brand including fitting with all accessories complete as directed by the Engineer-in-charge

Supplying and installation with testing and commissioning of Electric iron of approved brand including fitting with all accessories complete as directed by the Engineer-in-charge

Supplying of Tea set of approved brand as directed by the Engineer-in-charge

Supplying of Bath Towel of approved brand as directed by the Engineer-in-charge

Supplying of Hand towel of approved brand as directed by the Engineer-in-charge

Supplying and installation of Mop bucket as directed by the Engineer-in-charge

Supplying of Bucket of as directed by the Engineer-in-charge

Supplying of Mug of as directed by the Engineer-in-charge

Supplying of Dinner set as directed by the Engineer-in-charge

Supplying and installation of Cutlery set as directed by the Engineer-in-charge

Supplying and installation with testing and commissioning of Kitchen chimney of approved brand including fitting with all accessories complete as directed by the Engineer-in-charge

Supplying of Tissue paper of approved brand as directed by the Engineer-in-charge

Supplying of Glass vase of approved brand including fitting with all accessories complete as directed by the Engineer-in-charge

Supplying of Dustbin of approved brand as directed by the Engineer-in-charge

Supplying of Kitchen apron of approved brand as directed by the Engineer-in-charge

Supplying of Utility knife of approved brand as directed by the Engineer-in-charge

Supplying of Stainless steel jug as directed by the Engineer-in-charge

Supplying of Stainless steel cooking pot of approved brand as directed by the Engineer-in-charge

Supplying of Stainless steel stock pot of approved as directed by the Engineer-in-charge

Supplying of Pressure cooker of approved brand as directed by the Engineer-in-charge

Supplying and installation of Mixer grinder of approved brand including fitting with all accessories complete as directed by the Engineer-in-charge

Supplying and installation of Executive table of approved brand including fitting with all accessories complete as directed by the Engineer-in-charge

Supplying and installation of Wooden almirah of approved brand including fitting with all accessories complete as directed by the Engineer-in-charge

Supplying and installation with testing and commissioningof Ceiling fan of approved brand including fitting with all accessories complete as directed by the Engineer-in-charge

Supplying and installation and installation with testing of LED Ceiling light of approved brand including fitting with all accessories complete as directed by the Engineer-in-charge

Supplying of Aluminium Kadhai of approved brand as directed by the Engineer-in-charge

Supplying of Toilet brush of as directed by the Engineer-in-charge

Supplying of Salad bowl as directed by the Engineer-in-charge

Supplying of Spoon 1 of approved brand as directed by the Engineer-in-charge

Supplying of Spoon 2 of approved brand as directed by the Engineer-in-charge

Supplying of Spoon 3 of approved brand as directed by the Engineer-in-charge

Supplying and installation with testing and commissioningof LED Bulb of approved brand including fitting with all accessories complete as directed by the Engineer-in-charge

Supplying and installation with testing of Cloth dryer stand of approved brand including fitting with all accessories complete as directed by the Engineer-in-charge

Supplying and installation and installation with testing and commissioningof Inverter of approved brand including fitting with all accessories complete as directed by the Engineer-in-charge

Supplying and installation with testing and commissioningof Room Heater of approved brand including fitting with all accessories complete as directed by the Engineer-in-charge

Supplying of Artificial Flower for decoration stand of approved brand as directed by the Engineer-in-charge

Supplying of Drinking Glass of approved brand as directed by the Engineer-in-charge

Supplying of Glass coaster of approved brand as directed by the Engineer-in-charge

Supplying and installation and installation with testing and commissioning of 43" Television of approved brand including fitting with all accessories complete as directed by the Engineer-in-charge

Supplying and installation and installation of Computer Table of approved brand including fitting with all accessories complete as directed by the Engineer-in-charge

Supplying and installation of Side Table of approved brand including fitting with all accessories complete as directed by the Engineer-in-charge

Supplying and installation of Blinds of approved brand including fitting with all accessories complete as directed by the Engineer-in-charge

Supplying and installation with testing and commissioning of 1.5 Tonne Air Conditioner of approved brand including fitting with all accessories complete as directed by the Engineer-in-charge

UGPB Construction (BID ID -257263)