PROVN OF TOILET FOR ADMIN OFFICE, CHAIN LINK FENCING, SPL REPAIRS TO RWH AND ADDN ALTN TO MAIN GATE AT GURUGRAM BAGH, NTS GURGAON, PROVN OF TOILET AT MTRS OF AFSSR AND SPL REPAIRS TO GI PIPELINE WITH ALLIED WORKS IN SAFED SAGAR AT VSV GURGAON UNDER A

Amount

B/R WORKS Demolition of cement concrete in ground floor and pavings n exc 15 cm thickness (below of above ground level) incl removing the rubbish outside MOD Land complete all as specified.

Demolition of cement concrete (reinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level), including removal of rubbish outside MoD land, complete all as specified and as directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed

Dismantling stone slabs and tiles laid bedded and pointed in mortar of any description or thickness in floors, aprons etc. complete all as specified and as directed by Engr-in-Charge.

Dismantling Mild Steel work of any description not otherwise provided for complete all as specified and as directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil complete all as specified and as directed.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting outin hard/dense soil complete all as specified and directed by Engr-in-Charge.

Excavation in post holes (or similar holes) each n exc 0.5 cum, getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm thick watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and as directed

M&L for PCC (1:4:8), type D2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete etc complete all as specified and as directed

M&L for providing plain cement concrete 1:2:4 type B-2 (using 40mm graded stone aggregate) as in foundation and mass concrete complete all as specified and directed by Engr-In- Charge.

M&L for brick work with sub class 'B' brick, straight or curved on plan exc 6.0 mtr mean radius built in CM 1:6 etc complete all as specified and as directed

M&L for brick masonry with sub class 'B', old size bricks straight or curved on plan exceeding 6m mean radius, built in Cement Mortar (1:4) complete all as specified and as directed.

Ditto all as per abvoe item but except bricks. Note:- Serviceable bricks retrieved from Serial item No. 1 shall be used.

S&F MS joist channel (Fe 410-W Gde E-250 Quality A), angle or Tee section MS tubes, flats square bars, guard bars, grills, gratings etc fixed independently or framed without connecting plates ,trusses etc any type framing confirming to Grade Fe 410-0 or Fe-310-0 including cutting bending, welding and fixing in position complete all as specified and as directed.

M&L for mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes for notching of wire, etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work etc complete all as specified and as directed

S & F rolled sections, MS Angles, MS tubular Structures, MS Channels, Tee, etc. (Fe 410-W Gde-E-250 quality-A)as in main and cross beams, hip and jack rafters, purlins , posts,trusses (framed or unframed) structures where connected to common rafter and running rails and guides for sliding doors, fixed with angles clleats or other connecting plates all as specified. Note:- The work including fixing of MS Members,Trusses at height up to 15 m above ground level hence the rates deemend to be included in the rates and nothing extra shall paid

Supply only mild steel galvanised chain link fencing of any size or type etc complete all as specified and as directed

Fixing only chain link fencing including line wires of any dia, any mesh size and type to any types of starndards, rails, straining bolts etc including provision of binding wire complete Notes : Chain link fencing, nut bolts, and line wires shall be measured separtely under supply only rate

Supply and fixing mild steel screw bolts 5 to 10 mm dia (machine made) with hezagonal or square at one end and screwed the other ends and fitted with washers and one hezagonal or squre nut exc 5 cm but not 10 cm long etc complete all as specified and as directed

M&L for Damp proof course 40mm thick in PCC (1:2:4), type B0 (using 12.5mm graded crushed stone aggregate) with WPC (WPC shall be measured and paid separately) to horizontal or vertical surfaces including necessary formwork complete all as specified and as directed

S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel 0.50 mm thick of any colour as directed by GE having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Ditto as above but plain sheet as in ridge ,valleys etc

S & F 3mm thick coloured acrylic transluscent plain/corrugated sheeting with/without two side lap fixed with coach screw and washer in vertical/ horizontal surface all as specified

M&L for Hard drawn steel wire fabric weight not exc 4Kg/Sqm cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcemnt complete all as specified and directed

M&L for formwork to sides and soffits of floor or roof beam, beam and haunching, girders, bressummers, lintels cantilevers, shelves including supports, overhangs etc also splays between floor and beam etc complete all as specified and as directed

M&L for preparation of new surfaces of steel and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Labour only for clearing away all grass vegetation, saplings, shrubs, brushwood, undergrowth, roots, and trees not exceeding 30 cm girth (measured one metre above ground level) and removing rubbish upto a distance of 50 metres outside the periphery of the area under clearance and picking up gravels from harvesting pits, washing with water and again filling in same gravel in the same pit complete all as directed.

Supply and spreading crushed stone aggregate 40mm size for filling in recharge pit complete all as specified and directed.Charge

Supply and spreading crushed stone aggregate 20mm size for filling in recharge pit complete all as specified and directed.

M&L for loose filling with coarse sand in trenches complete all as specified and directed by Engineer- in - Charge

M&L for loose filling with gravel 3 to 6 mm size around 6" pipe complete all as specified and directed by Engineer- in - Charge

M&L drilling 8" (200) bore, holes by roatary drilling method below GL in any type of soil including disposal and surplus soil to distance exc 1.50 KM but not 5.00 KM etc complete all as specified and directed by Engineer- in - Charge

S&F plastic PVC pipe of pressure rating 6 Kg / Sqcm, 150 mm dia ISI mark in standard length complete all as specified and directed by Engineer- in - Charge

Ditto but slotted pipe having 2.3mmX7.5mm slot complete with necessary fitting jointed complete all as specified and directed by Engineer- in - Charge

S&F PVC wellcap 6 " (150mm) bore mild steel ARW pipe having internal threads and with welded iron handles and fixed in position complete all as specified and directed by Engineer- in - Charge

Developing the harvetsing bore by means of air compressure at 250 CFM (commpressure / water) as required for developing shall be used and arranged by the contractor by its on resources complete all as specified and directed by Engineer- in - Charge

M&L for providing reinforced cement concrete (1:2:4) type B1 (Nominal mix) (using 20 mm graded crushed stone aggregates) as in beam, cantilevers, bressumers, lintels over 1.5 mtr span etc complete all as specified and as directed

M&L for formwork to soffits of suspended slab such as roof slab, floor slabs, landing and similar work not exceeding 200 mm thick (horizontal or slopping ) etc complete all as specified and as directed

M&L for formwork to soffits to edges of concrete flats, teads, breaks in floors, window, cills, concrete railing opening in concrete walls, floors and roofs not exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but not exc 20 cm wide etc complete all as specified and as directed

M&L for providing reinforced cement concrete (1:2:4) type B1 (Nominal mix) (using 20 mm graded crushed stone aggregates) as in slab supported on walls, and coloumn in floors, roofs, landing, balconies, canopies, deck slabs and shelves and the like etc complete all as specified and as directed

M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc complete all as specified and as directed

Supply only mild steel round bars of 10 mm dia as in line wire, cut to lengths, hooking ends etc confirming to Fe-410W (grade E-250) quality 'A' for tying chain link fencing complete all as specified and as directed

M&L for TMT bars 5 mm dia and over, upto and including 10 mm dia as in stirrups, cut to length, bent to shape required including cranking, bending for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc complete all as specified and as directed

M&L for cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting purlin/ rafter of structural steel and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required, depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall n.exc half brick complete all as specified and as directed.

M&L for 75mm thick PCC (1:4:8), type D2 (using 40mm graded crushed stone aggregate) as in sub base of flooring etc complete all as specified and as directed

M&L for PCC (1:3:6), type C1 (using 20mm graded crushed stone aggregate) as in plinth protection etc complete all as specified and as directed

M&L for hardcore of gauge n exc. 63mm, with broken stone or boulders deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed

M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surface finished even and fair mixed with water proofing compound as per manufacture instruction etc complete all as specified and as directed Notes : WPC shall be measured and paid seperately

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick masonry or concrete surfaces, finished even and fair without using extra cement complete all as specified and as directed

M&L for rendering 15 mm thick in CM (1:6) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) etc complete all as specified and as directed

M&L for rendering 10 mm thick in CM (1:3) on fair faces of brick work or concrete surface mixed with water proofing compound as per manufacture instruction etc complete all as specified and as directed Notes : WPC shall be measured and paid seperately

Supply only WPC

M&L for 3 mm thick APP modified prefabricated in five layers & weight not less than 3.6 Kg/Sq mtr water proof membrane reinforced with non-wooven polyster with two coat of aluminium paint over top surface of water proofing membrane with 15 cm longitudinal & horizontal over lapping and joints finally pasted with thermo- fused with LPG flames laid over a coat bitumen @ 1.20 Kg /Sqm over bituminous of primer 0.30 ltr per sqm as per manufacturer instruction of APP modified membrane etc complete all as specified and as directed

M&L for formwork to sides chullah hoods, chajja, trough and similar items including edges etc complete all as specified and as directed

M&L for providing reinforced cement concrete (1:2:4) type B1 (Nominal mix) (using 20 mm graded crushed stone aggregates) as in chajja etc complete all as specified and as directed

M&L for rendering 5 mm thick in CM (1:3) on fair faces of brick work or concrete ceiling surfaces etc complete all as specified and as directed

M&L for screed bed/backing coat 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces complete all as specified and directed by Engr-in-Charge.

M&L for Glazed ceramic ware coloured printed tiles 300x 450 x 6 to 8 mm thick in dado, set and jointed in neat cement slurry and pointed in colour cement to match the surface laid over and including 12 mm thick rendring in CM 1:4 on any faces of brick work for fixing wall tilesover and including bedding layer of cement mortar.

M&L for joint free non skid skretch proof stain resistant coloured ceramic tiles 600 X600 X 7 to 9 mm thick in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor laid over and including screed bed 15 mm thick in cement mortar 1:6 complete all as specified and directed by Engineer-In- Charge.

M&L for 25 mm thick cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregate for floor ,finishing the surface even & smooth without using extra cement complete all as specified & directed by Engr -in charge.

M&L new plastered or unplastered surfaces of walls/ceiling by applying 1mm thick birla white cement wall care putty to get smooth & levelled surface for applying next treatment complete all as specified and directed by Engineer-in-Charge

M&L for applying two coats of distemper oil emulsion , white or tinted over a coat of primer (on prepared surfaces with birla white cement wall care putty in previous respective items) on wall/ceilings complete all as specified and directed by Engineer-in-Charge

M & L for 15mm bore galvanised steel water tubing medium grade (ISI Marked) with all fittings and fixed complete to walls and or laid under floors etc complete all as specified and directed by Engineer-in-Charge.

Ditto but 20mm bore pipe complete all as specified and directed by Engineer-in-Charge.

S & F for 100 mm bore cast iron soil, waste and vent pipes,(sand cast pipes) in any length with or without ears with cement joints, laid in trenches or in floors/fixed to walls complete all as specified and directed by Engineer-in-Charge

S & F for 75 mm bore cast iron soil, waste and vent pipes,(sand cast pipes) in any length with or without ears with cement joints, laid in trenches or in floors/fixed to walls complete all as specified and directed by Engineer-in-Charge

Ditto for 50 mm bore but fixed to walls including necessry GI stack clamps complete all as specified and directed by Engineer-in Charge

S & F cast iron cowls 50 mm complete all as specified and directed by Engineer-in-Charge

S & F 100 mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed by Engineer-in-Charge

S&F 75 mm bore outlet cast floor/nahani trap with 100mm size stainless steel gratings including jointing to waste pipe fixed in cement concrete type (B-1) 1:2:4 etc complete all as specified and directed by Engineer-in Charge

S & F 75 mm bore cast iron bends of (any radius), dimnishing pieces or taper (larger bore measured) complete all as specified and directed by Engineer-in-Charge

S&F Vitreous China wash down water closet (EWC) (Pedestal pattern) white cascade type Hindware model Rene Cat Part No 92088 pastel colour or equivalent as approved including all accessories like seat cover and CP jet complete all as specified and as directed

S&F Vitreous China wash down water closet (EWC) (Pedestal pattern) white as approved including all accessories like seat cover, CP Health faucet and CP jet complete all as specified and as directed

S&F wash hand basin vitreous china white glazed oval type on RCC conter including, CP waste coupling and waste pipe brackets and cutting on granite top for and pinning in ends of brackets and etc complete in all respect complete all as specified and directed by Engineer-in-Charge.

S&F wash hand basin vitreous china white glazed counter top type CAT PART NO 10052 of HINDWARE pastel or equivalent as approved including, CP waste coupling and waste pipe brackets and cutting on granite top for and pinning in ends of brackets and etc complete in all respect complete all as specified and directed by Engineer-in-Charge.

S & F bib tap chromium plated fancy type cast copper alloy with auto closing system Cat Part No PRS-CHR 043 of Make : JAQUAR, or equivalent as approved screwed for iron pipe or for brass ferrule and fixed fixed to 15mm bore pipe complete all as specified and directed by Engineer-in-Charge.

S & F bib tap chromium plated fancy type cast copper alloy screwed for iron pipe or for brass ferrule and fixed fixed to 15mm bore pipe complete all as specified and directed by Engineer-in-Charge.

S & F pillar tap chromium plated fancy type cast copper alloy with auto closing system Cat Part NO PRS-CHR 031L65 of Make : JAQUAR or equivalent as approved screwed for iron pipe or for brass ferrule and fixed fixed to 15mm bore pipe complete all as specified and directed by Engineer-in-Charge.

S & F pillar tap chromium plated fancy type cast copper alloy screwed for iron pipe or for brass ferrule and fixed fixed to 15mm bore pipe complete all as specified and directed by Engineer-in-Charge.

S & F stop cosk/angle valve chromium plated fancy type cast copper alloy with Cat Part No COT-CHR 23053 of Make : JAQUAR, or equivalent as approved screwed for iron pipe or for brass ferrule and fixed fixed to 15mm bore pipe complete all as specified and directed by Engineer-in-Charge.

S & F stop cosk/angle valve chromium plated fancy type cast copper alloy screwed for iron pipe or for brass ferrule and fixed fixed to 15mm bore pipe complete all as specified and directed by Engineer-in-Charge.

S & F paper holder with Cat Part No AHS-CHR-1553 of Make : JAQUAR, or equivalent as approved complete all as specified and directed by Engineer-in-Charge.

S & F toilet paper holder complete all as specified and directed by Engineer-in-Charge.

S & F soap dish holder with Cat Part No AQN-CHR-7731 of Make : JAQUAR, or equivalent as approved complete all as specified and directed by Engineer-in-Charge.

S & F towel rail 600mm long with Cat Part No AKP-CHR-35711PS of Make : JAQUAR, or equivalent as approved complete all as specified and directed by Engineer-in-Charge.

S & F tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed by Engineer-in-Charge.

S & F concealed stop cock regular body chromium plated fancy type cast copper alloy with Cat Part No ALD-CHR-089CQT of Make : JAQUAR, or equivalent as approved screwed for iron pipe or for brass ferrule and fixed fixed to 15mm bore pipe complete all as specified and directed by Engineer-in-Charge.

S&F PVC connection 15mm dia of standard pattern 450mm long, with two Nos brass check nuts and washers etc complete all as specified and directed by Engineer-in-Charge.

S&F Vitreous China Urinal of size 375x390x590mm flat back large of Hindware Cat Part No 60002 pastel colour with CP waste coupling, waste pipe and CP spreader with CP connection pipe complete all as specified

S&F Vitreous China Urinal of size 375x390x590mm flat back large including partation with CP waste coupling, waste pipe and CP spreader with CP connection pipe complete all as specified

S&F window / ventilator section of frame 72x55 mm fixed to wall or concrete surface with rowl plugs made, of galvanized steel powder coated and section of shutter 47x20 mm ,mulion section 72x50 mm (Base steel as per IS 513 "D" quality galvanized as per IS 277 with zinc of 120 gms/sqm.) glazed or gauged and wire gauge shutter prepare to receive wire mesh to the shutter(Double door shutter) with total coated thickness of 0.6 mm including grills/guard bars made of square bars powder coated fixed to windows frame with screws at 150mm c/c both ways, 4 to 5 mm thick sheet glass, 0.36mm stainless steel wire cloth with 1.40mm aperture necessory fittings and all builders hardware such as handles, tower bolts & stays etc. complete all as specified and as directed Make:- NCL type-4000 series or equivalent make as approved by GE.

S&F solid door frame 50mmx95mm made out of 5mm wood grain colour prelam PVC sheet reinforced with MS square tube complete all as specified and directed by Engineer-In- Charge.

S&F factory made solid PVC moulded door shutter, 28 to 30 mm thick (Stiles), with 2,4 or 6 raised panel design with 2 mm thick wood grain colour prelam Moulded PVC sheet on the front face and 2 mm prelam PVC sheet on back face as per specification and drawing in SSR complete all as specified and directed by Engineer-In- Charge.

S & F 200mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed by Engineer-in-Charge.

S&F stainless steel 100 mm long butt hinges for PVC door shutters and frames complete all as specified and directed by Engineer-in-Charge.

S & F extruded aluminum alloy handles fabricated type and anodised of size 150mm complete all as specified and directed by Engineer-in-Charge.

S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 250mm long and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

M & L for 18 to 20 mm thick granite stone slab (of any type & coloured as approved by GE) machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing as in kitchen platform/dado/skirting /plateform counter top WHB including cutting holes for oval shape /urinal partitions etc. laid over and including 15 mm thick cement screed bed 1:6 CM in horizontal or vertical surfaces including grinding the edges half round and polishing complete all as specified and directed by Engineer-In- Charge.

M&L for granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engr-in-Charge.

M&L for granite 20mm thick (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engr-in-Charge.

Returning filling in incl spreading levelling watering and well ramming in layers not exceeding 25cm in soil complete all as specified and directed by Engr-In- Charge.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting pointcomplete all as specified & directed by Engr -in charge.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of cement base paint to achieve uniform and smooth surface having no sign of brush marks complete all as specified and as directed.

M&L for Three coats of white wash including preparation of newely plastered wall surfaces of any description complete all as specified.

S&F Rotational moulded polyethylene water storage tank 500 litres capacity, ISI marked triple layer construction (cylindrical vertical closed top), hoisted & fixed in position including S&F Ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for 20mm bore GI pipe of having weight not less than 210gms including all fittings and gate valves with iron wheel head 20mm size, including taking down existing tank complete all as specified and as directed.Make-SINTEX /POLYCON /Polywell.

S&F 150x150mm Salt-glazed stoneware gully traps, square or round mouthed, any type as per site requirement complete all as specified and as directed

S&F chromium plated brass shower rose 125 mm size with or witout swivel joints including fxing with 15 mm bore pipe, complete all as specified and as directed.

S & F 10 litres capacity, PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and suitable flush pipe PVC 32mm dia complete all as specified and as directed.

M&L ATT for treating the bottom and sides of excavation at the rate of 5 Ltrs of emulsion per sqr mtr of surface area complete all as specified and as directed

M&L ATT for treating the back fill in contract with foundation at the rate of 7.5 Ltrs of emulsion per Sqm of vertical surface (area of the sub structure in contact with back fill to be measured ) etc complete all as specified and as directed

M&L ATT for treating the top surface of filled up earth at the rate of 5 Ltrs of emulsion per square meter of surface complete all as specified and as directed

M&L ATT for treating the soil under plinth protection at the rate of 5 Lters of emulsion per square meter of surface complete all as specified and as directed

M&L ATT for treating the soil along with external perimeter of building at the rate of 2.25 Lters of emulsion per mtr of the wall etc complete all as specified and as directed

Spreading and levelling in well layers not exc 25 cm thick including watering as required etc complete all as specified and as directed

M&L for sand cushioning including watering and consolidations etc complete all as specified and as directed

Supply, febrication and fixing of stainless steel 304 grade letters incl vowels smooth finish as per sample provided (Hindi/ English) on granite wall/Steel sheet made out of 1mm thick stainless steel sheet (minimun size not less than 40mm thick, 40mm in width and 300 mm high) and 10 mm dia, 75mm long MS studs weld with back side of letters as per site requirement fix on granite wall/Steel sheet making holes by drilling machine and studs fix with epoxy adhesive/nut bolts complete all as directed by Engr-in-Charge.

M&L for reinforced concrete pipes, class NP2, laid and jointed complete with collars Salt glazed stoneware drain pipes 150mm size laid in trenches and jointed complete all as specified and directed by Engineer in charge.

M&L for cement concrete 1:3:6 Type C2 using 40mm graded stone aggregate as in bed to drain pipes including packing under and haunching against the sides of pipes 150mm bore size after they are laid and tested complete all as specified and directed by Engineer in charge.

M&L for cement concrete 1:2:4 Type B2 using 40mm graded stone aggregate as in foundations of manholes etc complete all as specified and directed.

M&L for providing cement concrete (1:3:6) type C2 (using 40 mm graded crushed stone aggregate) as in surface channels and drains complete all as specifed and as directed

M&L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in coping, bed block, kneels, apex stones etc including weathering slightly rounded or chamfered including form work complete all as specified and as directed

Material and labour for providing cement concrete (1:2:4) type B1 (using 20 mm graded crushed stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and as directed.

M&L for Pre cast cement concrete 1:2:4 Type B-1 using 20mm graded stone aggregate set in cement mortar 1:4 as in Manhole covers , shelves and similar items complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confriming to IS 15658-2006 of 100 mm thickness , M-50 grade with Grey Cement and pigment, laid over 25 mm thick sand cushion over 75mm thick PCC (1:4:8) type D-2 (using 40mm graded crrushed stone aggregate) complete all as specified and as directed (Sand cushion and PCC shall be measured and paid seprately).

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms moulds, mitred/ stopped ends etc complete all as specified and directed.

Extra for forming fair finished drain or channel 45 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc.complete all as specifed and as directed

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 150mm dia pipe complete all as specified and directed.

E/M WORKS Taking down CI pipe including connections and CI fittings, U/S lead complete with removal to store all as specified and directed.

80 mm Bore

100 mm bore

Taking up or down steel tubing and connections, including removal to store complete all as specified and as directed.

50 mm Bore

20 mm bore

Supply and laying CI pipe line with spigot and socket ends and centrifugaly cast class"L A" in any length laid in trenches of size mentioned under complete all as specified and directed

(a) 80 mm Bore

(b) 100 mm bore

Supply and laying 50mm bore GI pipe line with all fittings like socket of any type, elbow, bend, Tee, union, short piece, long screw, flange, cutting & welding as reqd site, medium grade laid in trenches of size:- Note : All fixing materials are included in the unit rate

Supply and fix in replacement cast iron flanged drilled heavy duty sluice valve of size 100 mm bore with ISI mark with stainless steel spindle and check nut and plan PN-1.6 complete with rubber insertion, nuts and bolts with washers etc including taking down old unserviceable sluice valve of size 100 from existing position after removing out nuts/bolts etccomplete all as directed by Engr-in-Charge.note.Nuts and bolts,gasket is included in the unit

Supply and fix in replacement cast iron flanged drilled heavy duty sluice valve of size 80 mm bore with ISI mark with stainless steel spindle and check nut and plan PN-1.6 complete with rubber insertion, nuts and bolts with washers etc including taking down old unserviceable sluice valve of size 80 from existing position after removing out nuts/bolts etccomplete all as directed by Engr-in-Charge.note.Nuts and bolts,gasket is included in the unit

Supply and fix Gun Metal globe or Gate valve iron wheel head screwed both ends for iron pipes of size 50mm dia bore complete all as specified and directed by Engr-in-Charge after taking down old one. Note : All fixing materials like socket & threading is included in unit rate.

Ditto but of size 20mm bore complete all as specified and as directed by Engr-in-Charge after taking down old one.Note : All fixing materials like socket & threading is included in unit rate.

M&L for CI Bends (any type, radius and angle) tapers any type,(straight, bend,increasing,decreasing or double socket etc.) Tee pieces single branch. "Y" junction,double branch cross(all sockets or scocket and spigot) collars,Tail piece, caps and plugs upto 150 mm bore CI pipe.

M&L for construction of Valve pit chamber 90 cm x 90cm (inner dimension) and 90 cm deep , from the top of MS cover fixed on PCC Base , top cover shall be of 3 mm thick MS Sheet with locking arrangement of pad lock of 50mm size including brick work with sub class"B" bricks in CM 1:4 including 15 mm thick plaster in CM 1:4 (internally and externally) and necessray earth work in anu type of soil including returning filling in and disposal of surplus oil to a distance n exc 50 mtrs and 150 mm thick PCC 1:4:8 , type D-2 , using 40mm graded stone aggregates as in floor complete all as specified and directed.

M&L for construction of Valve pit chamber 60 cm x 60cm (inner dimension) and 75 cm deep , from the top of MS cover fixed on PCC Base , top cover shall be of 3 mm thick MS Sheet with locking arrangement of pad lock of 50mm size including brick work with sub class"B" bricks in CM 1:4 including 15 mm thick plaster in CM 1:4 (internally and externally) and necessray earth work in anu type of soil including returning filling in and disposal of surplus oil to a distance n exc 50 mtrs and 150 mm thick PCC 1:4:8 , type D-2 , using 40mm graded stone aggregates as in floor complete all as specified and directed.

M&L for boring/auguring (upto 6mtr span) suitable hole and insertion of 50/80/100mm dia GI pipe not less than 600mm below existing PCC/Road/hard standing complete all as specified and as directed. Note: GI pipe will be paid in saperate item

M&L for point wiring complete with multi stranded copper conductor 1.5 Sqmm size (Nominal area) FRLSH grade PVC insulated unsheathed cable 1100 volts grade confirming to IS: 694 drawn in and including medium duty concealed unplasticised PVC conduit confirming to IS : 9537 (Part-3) and ISI marked not less than 20mm dia with concealed sunk-in pressed steel terminal boxes of required size not less than 1.2 mm thick factory made and painted with sotve enamelled black paint top cover 2.8 mm thick plastic laminated sheet required colour fixed with brass screwes and cup washers including single core stranded copper conductor 1.5 Sqmm PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same concealed conduit with PVC gang box for housing the 5A switches complete all as specified for the following :-

One light point controlled by one switch.

One fan/exhaust fan/Air ciculator point controlled by one way switch including single core stranded copper conductor 1.5 sqmm PVC insulated unsheathed cable as earth wire to the common earth and connected to fan body all as specified.

One 5 pin socket outlet 5/6 amps on independent board including single core stramded copper conductor 1.5 sqmm PVC insulted unsheathed cable drawn in same conduit as earth wire to the common earth and connecting to earth dolly all as specified.

One 5 pin socket oulet 5/6 amps on same board including single core straned copper conductor 1.5 sqmm PVC insulated and unsheathed cable drawn in nsame conduit as earth wire to the common earth and connecting to earth dolly all as specified.

M&L for point wiring complete with stranded copper conductor 4.0 sq mm single core (nominal area) PVC insulated and unsheathed FRLSH cable 1100 volts grade drawn in and including medium duty concealed unplaticised PVC conduit conforming to IS : 9537 (Para-3) and ISI marked not less than 25 mm dia with 1.6 mm thick concealed pressed steel terminal boxes factory made and painted with stove enameled black aint , top cover 2.8 mm thick plastic laminated sheet of required colour fixed with brass screw and cu washers with all accessories including single core stranded copper conductor 1.5 mm PVC insulted unsheathed cable in same conduit as earth wire to the common earth and connecting to earth dolly all as secified for one 6 pin socket outlet two in one 16/6 amps on an indeendent board.

Supply and fix switch piano, flush type single pole, one way, 5 Amps, 240 volts all as specified and directed at site.

Supply and fixing socket outlet 2 in 1, 3 pin 5 Amps all as specified and directed at site.

Supply and fix switch socket combination 5Amps/16 Amps, 5 in 1, flush type all as specified and directed at site.

Supply and fix ceiling roses, surface bakelite 65x50mm with 3 terminals, PVC/Polycarbonate, isolated body fixed on PVC round block all as specified and directed at site.

Supply and fix 20 watt (4ft long) MIRRORLITE LED decorative box type fitting with coloured end caps for LED tube and with one number 16 watt LED tube energy efficient alternative to T8/T12 fluorescent tubelights with same form factor and appearance suitable for 4 feet version etc complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable from ceiling rose to terminal block and testing complete all as specified and directed at site.

Supply and fix in replacement of 20 watt (4ft long) decorative box type fitting with blue coloured end caps for LED tube etc complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable from ceiling rose to terminal block and testing complete all as specified and directed at site.

Supply and fix LINNET LED mirror light fitting with diffuser suitbale for 2 feet 10 watt and with one number 10 watt LED tube energy efficient alternative to T8/T12 fluorescent tubelights with same form factor and appearance suitable for 2 feet version etc complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed.

Supply and fix of factory made epoxy polyster powder coated distribution board SP&N 8 way fabricated from minimum 1.6 mm thick CRCA sheet with acrylic door (IP-42 protection) fixed flush to wall and suitable for universal mounting and including 100 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one or DP MCB and as incomer and SP MCB's as outgoings complete all as specified. Note: Civil works for flush mounting and making good to surfaces is deemed to be included in rates quoted.

Supply and fixing of MCB signle pole 5-30 Amps 230 volts,10 KA 'C' series complete all as specified and as directed.

Supply and fixing of MCB single pole and neutral 40 /63Amps 230 volts, 10 KA 'C' series complete all as specified and as directed at site.

Supply and fix in replacement MCB, DB , SPN 8 way suitable for single phase 240 volts with 100 Amps rated bus bar, double door type suitable for mounting incoming and outgoing MCB's single/double pole complete all as specified and directed at site.

M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick burried directly in ground not less than 2.25m deep below normal ground level (with the top edge of the plate not less than 1.50 m below the normal ground level) connected to GI earth wire 4 mm by means of GI bolts, nuts, check nuts and washers of GI all as shown in electrical plate No.3 of SSR Part-I connected to earthing test point with and including necessary excavation and earth work in any strata PCC pit 1:3:6 type C-1, 20mm bore medium grade GI pipe for watering 15mm bore light grade pipe for GI wire protection and funnel including 40mm thick RCC slab cover and testing on completion all as specified and as directed.

S&F submain wiring with unsheathed multi-stranded FR Grade copper conductor cable 1100 volts grade drawn through in and including PVC rigid conduit medium grade of not less than 25mm dia with conduit accessories and concealed in wall/surface of ceiling for two runs of 6 Sqmm single core HR Grade and one run of 6 Sqmm PVC insulated copper conductor for earth continuity wire between main DB to Sub main DB complete all as specified and as directed. Note :- Two run of single core cable with one run of earth continuity conductor and PVC conduit and accessories will be measured as one length including cutting chasing in wall complete. Note 1: Rates are deemed to be included for chases of conduit and sunking for boxes cutting and making holes in wall/floor for passing in or through conduit.

Supply & fix exhaust fans AC three phase 415 V of size 380 mm sweep with louver complete all as specified and as directed.

Supply and fix in replacement of 20 watt (4ft long) decorative box type fitting with blue coloured end caps for LED tube etc complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable from ceiling rose to terminal block and testing complete all as specified and directed at site.

Supply, laying and testing in replacement of cable XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor 1100 Volts grade cross sectional area 2 core x 10 Sq mm. complete all as specified and as directed. Note : Provision of suitable double crimpped lugs and glands deemed to be included in quoted rates.

All as above item but 16 Sqmm 4 Core

S/F curcular LED Wellglass with tapered fin design and exceptional thermol management alongwith IP 66 protection cat No LWC12-70-CDL Make : Cromption or Equivalent Model in Phillips/Bajaj/Halonix

S/F Decorative Post Top for 360' indirect light with IP 65 Protection, Resistant to impact and corrosion. Glarefree and batter uniformity. Cat part LPTO-40-CDL/M Make Cromption or Equivalent Model in Phillips/Bajaj/Halonix

S/F Air Circulator fan 230 Volts single Phase oscillating 450 mm sweep suitable for wall mounted air ball HS Make : Havells or equivalent model in Philips/Bajaj/Usha

Supply and fixing LED flood light Cast Aluminium Housing, Toughned glass, Silicon gas kit, High power LED alongwith suitable fastners for fixing on wall/floor Cat Part No LI-92002WL-40, Weidth 180 mm, Height 143 mm, 40 Watt LED make : Lustre or equavalent model in Vipro and Helonix. Note : Rate for suitable PCC work for fixing the flood light is including in coated rate.

S/F Exhaust fan 350 mm sweep ISI mark complete all as specified and directed by engineer encharge

S/F Lamp Holder, PVC/Polycarbonate type with back plate suitable for batten fitting including with one number 12 watt LED lamp copmlete all as spfd and directed

Supply & fix hand dryer, silver stainless steel of dimension 235x200x245mm 220 volts, Air speed 95 m/s, Drying time 25 seconds, power 2100 watt, Noise level 40 db, complete all as specified and as directed. Item code 142417606 Make :- Adhunik Marketing.

Supply and lay GI tubes medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors of size 25 mm bore all as specified and as directed

Supply and fix stop valves, cast copper alloy, screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed of size 25 mm size bore dia pipe all as specified and as directed.

M&L for cutting and inserting Tee 40 x 40 x 25mm dia including all necessary works complete all as specified and as directed.

PAWAN KUMAR

M/S GEETANJALI ENTERPRISES