PROVISION OF BASKETBALL COURT WITH SYNTHETIC PAINT AND LIGHTS FACILITIES NEAR DHANUSH BUILDING UNDER GE NW NAVY NAGAR

Amount

Surface excavation n. exc 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil.

M & L Hardcore with broken stone or boulders of gauge n. exc 63 mm deposited, spread and levelled in layers n. exc 15 cm thick, watered and rammed to atrue surfaces.

M & L cement concrete 100 mm thick in sub-base type D-2 1 : 4 :8 (40 mm graded aggregate).

M & L cement concrete type B-1, 1:2:4 using 20 mm graded aggregate and finishing cement concrete surface without using extra cement

M & L forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30 mm primed and sealed with sealing compound, Grade 'A'

M & L for wearproof topping 50mm thick mixed with approved metallic floor hardner as per manufactures instructions laid over cement concrete floors finished even and smooth all as specified and directed. (hardner to be paid seperately)

Supply only metallic floor hardner all as specified and directed

M&L and fabrication of mild steel work as in posts,purlins,crane gantires, rafter ,rails,wind tie nut & bolt etc and fasteningsetc and heavy brackets framing (MS tube, beam,tee,angle,channels,flat section etc and other sections) including distance pieces,cleats etc complete all as specified and directed .

Excavation in trenches n.exc.1.5m wide and not exc 1.5 m in depth for foundations of walls and not exc 10 Sqm on plan and n. exc 1.5 m in depth in any type of soil.

M&L Brick work built in cement mortar 1:4 using old size sub class "B" bricks in wall straight or curved on plan exc 6m mean eadius complete all as specified and directed

M&L 15mm thick rendering in cement mortar(1:4) on fair face of brick work or concrete surfaces finished surface even and smooth with using extra cement complete all as specified and as directed by EIC.

S & F Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars and similar work conforming to Fe-290, Gde E-165

M&L for PCC type B-1, (1:2:4) using 20mm graded crushed stone aggregate as in coping , benching ,bed blocks etc.

M & L for PCC 1:2:4 type B2 (using 40 mm graded crushed stone aggregate) as in surface channel and drains including necessary formwork and extra forming fair finsished drain or channels for inner girth in cement concrete etc complete all as specified and directed.

Returning , filling in, includding spreading , leveling , watering and well ramming in layers n. exc. 25cm in hard / dense soil all as specified.

Removing excavated soil side and demolised material exc 5 Km but n. exc 10 Km all as specified .

M&L 100mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in subbase to floors all as specified and directed.

M&L for sand cushioning under interlocking paver blocks watering and compact complete all as specified & directed .

S&F Factory Made machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness M-35 grade all as specified and directed

M&L two coats synthetic enamel paint over a coat of red oxide primer on new steel surfaces including prepration of surface of any description over 10 cm width or girth not otherwise all as specified and directed

M&L acrylic synthetic coating paint of 5mm thick for basket ball court of approved colour in(2mm) for Basketball/volileyball court including court marking all as per international sports instructions as per manufactures specification all complete as directed by Engr-in-Charge. Procedure of work : (a) Acrylic Synthetic Coating. (b) Preparation. The surface shall be cleaned throughly with water to remove all dust & dirt, filling up the depressions with chemically based sealer ete. (c) Priming and sealling (Base Coat) One coat of primer base coat shall be spray and let it cured for 3 hours. (d) Resurfacer coat. The sealer coat will be applied in layer as required and same will be cured. (e) Colour coat, Two coats of top coat will be applied 1 coat with squeere and one coat with roller of approved shade. (f) Finally the line marking will be done with white color andoutside marking to demarked the court color. (g) Line Marking as per international standards

S & F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach scew and washer all as specified and directed by Engr-in-Charge

Excavation in post holes in soft loose soil (or similar holes ) each n.exc 0.50 cum,getting out,returning,filling in and ramming earth or broken rubble and removing surplus soil all as specified and directed

M&L Plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate in foundation filling mass concrete all as specified and directed

S&F mild steel work as in angle iron post and struts in fencing including cutting tops to shape as directed,drilling holes,notching for wire etc flat iron fillets ( for securing wire mesh etc) including all necessary drilling,bolting or riveting and welding to existing boundary wall fencing post and other similar location etc complete all as specified and directed

S & F hot dipped galvanised 3.5mm dia PVC Coated chain link fencing mesh size 75mm x75mm made up into mattresses or cages, including line wires, any mesh size and type to any type of standards,rails,straining bolts etc including provision of binding wire all as specified and directed

Removing excavated material n.exc 50 m and deposited where directed at a level not exc 1.5 m above the base as in soil.

Taking down old unserviceable flood light fittings from any height and Supply & fixing LED flood light fittings comprising of epoxy powder coated housing, enclosed with glass cover in frame,(with total lumen output not less than 25000 lumens and suitable wattage for efficiency not less than 100 lumens/Watt) min wattage 250 watt, with ingress protection IP 65/66 and SPD of capacity 10 KV etc incl necessary clamps etc complete and testing on completion all as specified and as directed. Make:Bajaj/Havells/Crompton/Wipro

Taking out old/unserviceable and Supply and erect steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9.0 metres long) all as directed incl dismantling old one. NOTE :- Earth work, Cement concrete in foundation, coping etc will be measured and paid separately under relevant item.

S&F loop-in/loop-out box of outer size size 225mmx295mmx122mm made out of FRP(Hot moulded type) with weather proof canopy and locking screws along with with 5/6 Amps MCB - 01 No, 50 Amps rated 3 pole connector- 01 Nos, neutral link mounted and Din rail suitable size for mounting MCB/Connector etc complete in the box, duly fixed to to steel tubular/rail/PCC/RCC pole using 25 x 3mm aluminium clamp not less than, including suitable gland and lugs for connecting cable complete all as specified and directed by Engr-in-Charge

Supplying and laying with commissioning and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of size 35 sqmm 3.5 core laid in trenches, passing through pipes, fixed on walls complete including connecting properly by means of thimbles.

M&L for 50mm dia High density poly-ethylene pipes (HDPE) of pressure 6 kgf/cm2 pipe, for road crossing of cable or for cable protection laid in trenches or above ground surface all as specified and directed.

Supplying and laying with commissioning and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of size 10 sqmm 2 core laid in trenches, passing through pipes, fixed on walls complete including connecting properly by means of thimbles and taking out old u/s damaged cables.

Excavation in trenches not exc 1.5 mtr wide and not exc1.5 mtr in depth for laying of cables etc. in any type of soil and getting out all as specified and directed by Engineer-in-Charge. Note : Rate includes removing of paver blocks carefully and stack properly for refixing after laying of cables .

All as per above item No 34.00 above but exceeding depth 1.5 mtr and n exceeding 3 mtrs.

Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in soils.

Removing excavated material from the site of work and transporting out of Station/site of work suitable to the contractor all as specified.

S&F GI pipe 32 mm light grade with all fitting fixed to electric pole for cable protection with suitable size clamp, nut bolt and washers all as directed.

S&F in repair, MCCBs of capacity 200 Amp 4 Pole in existing FP/panel, connecting to bus-bar with all connecting accessories and modification in busbar (if Necessary), connection complete and testing after completion, all as specified and directed, of following capacities :-

M & L for Cross arms, bracings supports, clamps and back plates fabricated from structural steel sections including nuts, bolts washers welding, bending cold or hot drilling holes for bolts in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint coplete all

Earthing complete with Galvanised Steel earthplate of size 60x60cmx6.3mm thick electrode and GI wire 4 sqmm dia as earth lead, buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m below ground level, connected to earth wire 4 sqmm by means of nuts, bolts, check nuts and washers of GI all as shown in electrical plate No.3 of SSR Part-I, including testing on completion (Rates inclusive of neccessary excavation in any type of soil, earth work, PCC pit, CI cover, funnel with watering pipe, suitable size of light grade GI Protection pipe for earth strip in ground etc. all as required at site for complete earthing).

Taking out old u/s and Supply, installing, testing and commissioning of LT feeder pillar box factory made cubical indoor type, fabricated out of 2.0mm thick CRCA sheet with angle iron base frame made of 40x40x6mm, 45cm height, floor mounted duly bolts and nuts grouted, dust and vermine proof, suitable for voltage 415V 3 phase 4 wire weather proof with IP-66 protection, with separate hinge door for each compartment for incoming and out going MCCB etc with locking arrangement, with back door openable (Screwed), legs grouted in PCC complete including painting with two coats of epoxy powder paint over a coat of primer after under going a rigorous metal treatment process involving alkaline degreasing, descaling in dilute sulphuric acid or any other acid and phosphate and with copper busbar (TPN), suitable double compression copper cable glands complete in all respect for bay work station and including provn of the following:-

S&F MCCB 100 Amps, 4 Pole, 25 kA, thermal magnetic release, Ics=100% Icu - 01 Nos,

S&F MCCB 63 Amps, 4 Pole, 16 kA, thermal magnetic release, Ics=100% Icu - 02 Nos,

S&F MCB TPN 40 Amps, 10 kA, - 02 Nos,

Digital panel meter with LCD multifunction meter with CT/PT and all parameters as V,A,F,PF,KW,kVAR,kWH etc of

Phase indicator lamp R,Y & B (Set of 3)- 01 Set

S&F Copper Bus bar 125 Amps of suitable size, all are in equal size - Set 1(R, Y, B, N)

satguruenterprises (BID ID -3119704)

SAHU AND SAHU CO. (BID ID -3104046)

P LAXMI AND CO. (BID ID -3105170)

SHREE JAGDISH FURNITURE CO. (BID ID -3098977)