Conservation and Facade Restoration of Heritage Precincts Zampa Precinct and Market Precinct and Upgradation of fruits and vegetable market with Defect and Maintenance Liability Period for Five Years Under SMART CITY MISSION at Diu 2nd call

Civil Items :

Clearing and grubbing road land including uprooting rank vegetation grass bushes, shrubs, sapling and trees girth up to 300 mm removal of stumps of trees cut earlier and disposal of unserviceable materials (C) By mechanical means including lead and lift

Earthwork Excavation upto 1.5m depths including sorting out and stacking of useful materials and disposing off the excavated stuff with all lead and lift (A) Loose or soft soil

Felling trees of the any girth and height including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material and filling the excavated earth and making good as per direction of Engineer-in-Charge

Demolition and disposal of unserviceable materials with all lead and lift. (ii) Unreinforced cement concrete / Pavements / rubble by manually/mechanically as per direction of Engineer-in-Charge

Preparing surface by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleared surface with gunny bags to remove all loose dirt etc.,

Demolition including stacking of serviceable material and disposal of unserviceable materials with all lead and lift. (i) R.C.C. work

Dismantling tiled of stone floors laid in mortar including stacking of serviceable materials and disposal of unserviceable materials with all lead and lift.

Providing material and labour for Demolition of Brick work and stone masonry including stacking of serviceable materials and disposal of unserviceable materials with all lead and lift.(ii) In Cement Mortar.

Demolition and disposal of unserviceable materials with all lead and lift.(i) Cement concrete. (Jalis) of Vegetable market

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material at suitable place as per direction of Engineer-in-Charge : Asbestos cement sheet

Dismantling G.I / M.S . pipes ( external work) above 40 mm nominal bore including taking out the pipes, manually/ by mechanical means including stacking of pipes within all lead as per direction of Engineer-in-charge.

Rolling of earthwork in layers with power roller including filling in depressions which occur during the process

Watering of earth work as directed

Providing and laying plain cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6- hand broken stone aggregates 40 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth

Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density,& having CBR 30% minimum, complete as per clause 401 as per direction of Engineer-in-Charge

Providing and fixing Cast iron jali of required size as per Architects choice including fixing, cleaning surface. Including material, fabrication and supply as per direction of Engineer-in-Charge

Providing and fixing 10x10x10 cm Red Rajula cobble stone block hand cut and chisel dressed on top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1 cement : 4 coarse sand) with joints 10mm wide filled with same mortar including ruled pointing etc. complete as per direction of Engineer-in-Charge

Supply and laying of grey colored Anti line grass pavers with M40 Grade concrete suitable for fire tender loads of size 300mmX300mmX 120mm for gardening purpose as per direction of Engineer-In-Charge.

Providing and fixing Stone roman mossaic tiles on finished floor surface of size 300 mm x 300 mm x 7 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The mosaic tiles to be fixed on the floor surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge:

Providing and laying river washed Granite slab 25mm thk flooring/wall in required design and patterns, in linear as well as curvilinear portions all complete as per the architectural drawings with 25 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with cement slurry admixed with pigment of matching shade including wastage,rubbing, cutting, curing and polishing etc all complete as specified and as directed by the Engineer-in-Charge : Colour Jet Black, Cherry Red, Steel grey, Elite Brown, Cat Eye or equivalent as per direction of Engineer-In-Charge

Providing and fixing 10x10x10 cm Kota cobble stone block hand cut and chisel dressed on top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1 cement : 4 coarse sand) with joints 10mm wide filled with same mortar including ruled pointing etc. complete as per direction of Engineer-in-Charge

Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm length,30cm height and 15/12.5 cm thick of M25 grade concrete as per approved design and including excavation for fixing in proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc complete including corner, quadrants, angles, radius, dropper kerbs in all shapes. (Brands: Vyara, Alcock,pavit/equivalent)

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-Charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-Charge).

Providing and fixing 10x10x10 cm light grey limestone cobble stone flooring hand cut and chisel dressed on top, for paving in floors, drains etc. with lacquer finish (Acrylic highly glossy) laid over 20mm thick base mortar 1:4 (1 cement : 4 coarse sand) with joints 10mm wide filled with same mortar including ruled pointing etc. complete as per direction of Engineer-in-Charge

Providing and fixing 10x10x10 cm Multi-colored Granite cobble stone flooring & edging hand cut and chisel dressed on top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1 cement : 4 coarse sand) with joints 10mm wide filled with same mortar including ruled pointing etc. complete as per direction of Engineer-in-Charge

Providing, fabricating and erecting Map of Diu with 6mm thick A grade Corten steel sheets fixed over the brick/stone masonry base as per required shape,size and profile,. including cost of material, insert plates, fasteners, fabricating, jointing, welding, threading, transportation to final worksite, erection in position etc. complete with all leads as per drawings & specifications and approval of architect & engineer-in-charge.

Providing, fabricating and erecting Arches with 6mm thick A grade Corten steel sheets fixed to the existing Market structure with required shape,size and profile,. including cost of material, insert plates, fasteners, fabricating, jointing, welding, threading, transportation to final worksite, erection in position etc. complete with all leads as per drawings & specifications and approval of architect & engineer-in-charge.

Providing and laying 40mm thick marble slab laid in model and cut according to shape and polished (I.E. Terrazo) to granolithic finish with under layer 30mm thick cement concrete 1:2:4 (1-cement;2-coarse sand;4-graded stone aggregate 10mm and down gauge) and top layer 10mm thick with white, black or white and black marble chips of required sizes from 1mm t 4mm nominal size laid in cement marble powder mix 3:1 (3-cement ;1-Marble powder by weight) in proportion of 4:7 (4- cement;7-marble chips by volume) (c) Medium shade pigment with approx. 50% white cement an 50% ordinary cement (in top layer only)

Removing dry or oil bound distemper by a washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete.

a) Zampa City Wall Cleaning the sand stone surface and removing dirt, dust, bird dropping, grease, oil, algae, fungus, monkey beats, vegetable growth etc., including providing, applying and washing the surface with liquid Ammonia Chemical of 5% solution and other chemical cleaning agent as approved by Archaeological Survey of India/ Engineer-in-Charge, of approved brand and manufacturer, with the help of required scrubbers and also cleaning with machine operated water jet mixed with desired quantity of fine silica where ever required, without causing any scratching/ damage to the stone surface and finally washing the surface with clean water with the help of pressure jet machine, complete in all respect, including taking all precautions to safeguard ventilators, windows, doors etc. by suitable covering so as to avoid any damage to the building/structure including b) Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-Charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding all as per direction of Engineer-in- charge

Market precinct & Navaratri Chowk Cleaning the sand stone surface and removing dirt, dust, bird dropping, grease, oil, algae, fungus, monkey beats, vegetable growth etc., including providing, applying and washing the surface with of liquid Ammonia Chemical of 5% solution and other chemical cleaning agent as approved by Archaeological Survey of India/ Engineer-in-Charge, of approved brand and manufacturer, with the help of required scrubbers and also cleaning with machine operated water jet mixed with desired quantity of fine silica where ever required, without causing any scratching/ damage to the stone surface and finally washing the surface with clean water with the help of pressure jet machine, complete in all respect, including taking all precautions to safeguard ventilators, windows, doors etc. by suitable covering so as to avoid any damage to the building/structure, all as per direction of Engineer-in- charge (The rate is inclusive of all materials & labours involved (except scaffolding).

Providing and laying White Stone Bela masonry block in course in superstructure with stone of approved quality in lime mortar 1:1.5 (1 Lime putty : 1.5 Fine sand ) including packing the joints etc, complete

Providing and laying 20mm thick cement plaster in single coat on brick/concrete walls for interior plastering upto floor two leveled and finished even and smooth in (iii) cement mortar 1:3 (1 Cement: 3 fine sand)

Providing and fixing 25mm thick Grey Rajula stone slab hand cut and chisel dressed on top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1 cement : 4 coarse sand) with joints 10mm wide filled with same mortar including ruled pointing etc. complete as per direction of Engineer-in-Charge

Providing, fixing and erecting High quality canvas fabric of minimum 200 GSM with super durability and resistance to fire & water of required colour and shade having width of 72 inch (1.83 m approx) and size complete with all the necessary fittings and fixtures as per the architectural drawings and as directed by engineer in charge.

Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings, the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). The weight of aluminium extruded section shall be taken for purpose of payment.

Providing and fixing well-seasoned Sal wood with wood preservative full length new members like joists, rafters, purlins, etc. including all fixtures and fastenings with oil finish etc. complete as per the drawing, Items to include using a larger section of wood to get the mouldings and chamfers as per original design, sample to be shown to the Architect and Engineer-in-Charge for approval before fixing and the execution of the work as per the direction of E.I.C i) Wooden Rafter Beam 75mmx 150mm On wall, on both side In oil finished with All necessary fitting & fixture as per the drawing ii) Wooden Main Rafter 75mm x 200mm @ 800mm C/C In Oil finished with all necessary fitting and fixture as per the drawing iii) Wooden Ridge Beam 75mm x 200mm In Oil finished with all necessary fitting and fixture as per the drawing iv) Wooden plank of 25mm thick X 150mm width Cladding on Top of Main Rafter, In Oil Finished with all necessary Fitting & Fixture. as per the drawing v) Wooden Purline 50mmx75mm @300mm C/C with all fitting & fixture. as per the drawing vi) Eave board 20mmx 240mm, in Oil finished, with all necessary Fitting & Fixture as per the drawing

Providing & fixing on roof pressed clay tile of size 500 X 210 mm (Mangalore tile) of 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately).

Providing & laying on roof pressed clay tile ridge (Mangalore tile) of 20mm thickness and of approved pattern on steel frame work complete (steel frame work to be paid separately).

Providing and fixing 150mm wide 450mm over all semicirucular plain G.I sheet class-3 gutter with iron brackets 40mm X 3mm size bolts, nuts, washersetc., including making necessary connection with rain water pipes. (i) 0.80mm thick sheet. (upto 10 ton)

Supply and laying of Pongamia glabra (Karanj) plant of height 300-360 cm at least having the girth size of 15-20 cm. in big poly bags of size 25 x 25 cm i/c filling earth and manure as per direction of the Engineer-in-Charge

Providing and fixing 1500 X 1500 X 40/100 mm thick tree grating suitably reinforced and manufactured with M30 Grade of concrete using vibro compaction process using FRP moulds so as to achieve shuttering finish on the five faces and gurmala finish on the top surface for long use and to prevent damages per the direction of the Engineer-in-Charge

Providing wide range of shrubs having necessary properties like well-watered, well drained and suitable for outdoor purposes as per direction of Engineer-in-Charge

Providing and laying gang saw cut 18 mm thick, river washed pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) bedding of average 1” thickness, floated with thick and neat cement paste with consumption of cement @4.4kg/ sqm and 2 kg /sqm for joints mixed with approved pigment to match the shade of the stone including dressing, rubbing, curing, cleaning etc. complete at all levels and heights. complete as per direction of Engineer-in-Charge

Providing and installing signage of size 1000mmx1500mmx75mm, with sturdy metal frame and matte finish aluminium sheet in dark grey colour around entire frame as per approved drawing, and pictures and text printed on surface in white colour as per direction of Engineer-in-Charge

Providing and fixing Garden wooden bench with back and arm rest, designed as per modern appearance accommodating 3-4 people requires low maintenance as per Architects choice including fixing, cleaning surfaces and including cost of loading -unloading and placing with crane. (Brands Arya Precast, TDW or equivalent) as per direction of Engineer-in-Charge

Providing and laying Precast Concrete grey rectangular Saucer Drain size of 600*300*100 with 0.4% water absorption as per direction of Engineer-in-Charge

Providing and installing signage of size 2400mmx2100mmx100mm, with sturdy metal frame and matte finish aluminium sheet in dark grey colour around entire frame, and pictures and text printed on surface in white colour as per direction of Engineer-in-Charge

Providing and installing the prefabricated public toilet made of stainless steel platform & closet (Indian/western), having toilet vacant status display, coin/switch based automated entry, manual exit, automated interior light & exhaust fan, wash basins, health faucet & cloth hanger, voice assistance system, self-cleaning, washing mechanism, manual flush option, water low indication, power backup facility, sensor for water & electricity conservation, GPRS based remote monitoring control facility through mobile app or web and revenue through coil collection and advertisements including Transportation, Commissioning, Taxes, Insurance & Warranty.

Providing and laying of Hot applied Thermoplastic compound 2.5 mm thick including Reflectorising Glass Beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC : 35 & finished surface to be level, uniform and free from streaks and holes. (As per Government letter No.SOR 102003/94/S-1/ Dated.20-7-2004)

Providing and installing artistic sculpture to be installed in a circular platform of 5m diameter in the centre of a vehicular intersection at the entry or historic DIU walled city. The maximum height of the sculpture shall be 4m and shall represent the amalgamation of kathiawadi and portuguese architecture in Diu. The materials used for the sculpture shall be non-corrosive and easy to clean. No imagery of any person, living or dead, shall be included in the design of the sculpture. The design of the sculpture shall be submitted to and approved by the Urban designer as per the direction of Engineer- in-charge.

Providing and fixing Cast Iron bollard of 200x200x915 mm clear height from finished level as single cast UV resistant stabilise colour pigment, colour as per Architects choice including fixing, cleaning surfaces and complete

Providing and fixing 25 mm outer dia pipe Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer-In-Charge

Providing and fixing 75 mm outer dia pipe 10 Kg/m2, PE 100 HDPE pipes confirming to IS 4984-1995, including all fittings, This includes jointing of pipes & fittings , trenching, refilling & testing of joints complete as per direction of Engineer-In-Charge

Providing and fixing 20 mm pop up sprinkler system including support pipe as per the requirement approved by Engineer-In-Charge.(Rainbird/equivalent)

Providing and fixing 25 mm nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end)

Providing laying ( to level or slopes) and jointing reinforced concrete light duty non pressure pipes I.S Class NP2 of the following internal diameter with collars and butt ends prepared for collar joints including testing of joints complete (B) 150mm

Providing and Constructing brick masonry chamber for underground Inspection chamber and bends with bricks having crushing strength not less than 35kg Cm2 in C.M 1:5 C.I Cover with frame (Light duty) 455mm X 610mm internal dimensions total weight of cover with frame to be not less than 38kg.(Wt. of cover 23kg) and Wt of frame 15 kg) (R.C.C. top slab with 1:2:4 mix (1 cement : 2- coarse sand: 4 - graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc., complete (iii) inside dimensions 600mm X 600mm and 450 mm deep for pipe lines with three or more inlets.

Excavation for Storm Water Drain foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff with all lead for all kinds of soil

Providing and laying in position Ready Mixed M25 Grade concrete for reinforced cement concrete work , using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10Kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability, including placing of PVC sleeves during casting as per direction of the EIC. Without Fly Ash (Min cement level as per latest IS 456 shall be maintained) (Cement level 450 kg )

Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. Height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (A) Foundations Footings Bases of Columns and wall of any thickness etc complete

Providing TMT Bar Fe 500/500D reinforcement for R.C.C. work including bending, binding with GI wires and placing in position complete upto floor two level

Providing and laying plain cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6- hand broken stone aggregates 40 mm nominal size) for Storm Water Drain and curing complete excluding cost of formwork in (A) Foundation and Plinth

Providing anticorrosive treatment to HYSD bars with FUSION BONDED EPOXY COATING (FBEC) confirming to IS13620:1993 for Storm Water Drain at approved plant including testing of coating as per relevant IS, before bringing the coated bars on site including To & Fro transportation of bars for sending at plant site etc. complete, for HYSD bars : (B) Above 12 mm and upto (and including) 20 mm dia (The rate should be including working in tidal conditions)

Supply, delivery and fixing of Precast R.C.C. horizontal grating with frame of size 500x450 mm accurately for Storm Water Drain designed molds and are suitably reinforced to enable the covers to take load of 20 MT for Heavy Duty as per direction of Engineer-in-Charge

Providing protective coating of water repellent siloxane (transparent in color) through brush or spray until complete impregnation over completely cleaned and dried stone or plastered surface to reduce the absorption of water as per direction of Engineer-in-Charge

Careful removal of existing deteriorated/ damaged/ weathered lime plaster without damaging the surface below it as per direction of Engineer-in-Charge

Steel-rod stitching in cracked wall, stone patties, beam, and lintels. Providing and fixing stainless steel rods of 90 cms length of which 15 cm on either side or cold bending at 90 degrees. The stainless steel clamps to be fixed perpendicular to the crack by drilling in wall and fixing wit cement and epoxy mixture in such a way that the entire length of the rod is in complete contact of the stone and the bend ends are fully inserted in the cracked wall. Use 316 grade stainless steel charge per hole, steel rod charges are counted per kg. Holes with 6 mm , 8 mm, 10 mm, 12 mm dia. as per requirement of position as per direction of Engineer-in-Charge

Providing and inserting 12 mm dia Aluminium/ galvanized iron injection nipples along crack lines in masonry work, including I) drilling holes of required diameter up to depths from 40mm to 80mm or half the thickness of member (whichever is less), at required spacing but not exceeding the thickness of member or 300 mm ii) Making grooves of size 12mm x 12mm along the crack line. iii) Making the crack dust free by blowing compressed air and then washing with water. iv) Sealing the distance between the injection nipples with approved putty (Polymer modified lime mortar /polyester putty/epoxy putty) etc. and allow it to cure. v) If limeitious grout material proposed to be used, washing and saturating the cracked surface with water by pumping from top most nipple and down wards complete as per the direction of Engineer-in-Charge( The rate shall include all material, labour and all operations above. The cost of grout material shall be paid separately on the basis of actual quantity consumed.

Providing and grouting pre-packed ready to use grout made up of natural hydraulic lime with the addition of natural pozzolona filler, specially designed for use in restoration of old brick/stone masonry. The grout material shall have low ( less than 1.5%) water soluble salt content, Elastic modulus not less than 5 Gpa and minimum compressive strength of 18 N/sqmm at 28 days. Mix the product by introducing 3/4 of the required water (which is 7-8 litres of 25 kg or as per manufactures specification) into the mixer. Add continuously the product and the remaining water until perfect mixer having a fluid consistency is achieved. Inject the same with gravity or mechanized equipment with pressure not more than 2 kg/sqcm as per site conditions by means of injection technique. The item shall include all cost of materials, machinery and labour etc. complete in all respect. (The payment shall be made on the basis of actual weight of approved grout injected into the cracks /voids as per direction of Engineer-in-Charge

Raking out the joints of country/Nankshahi brick, scooping out dead and decayed mortar very slowly and carfully with scooping rods, then washing complete with hand spray pump. Preparing the surface for replastering including disposal of rubbish with all lead and lift as per direction of engineer-in-charge.

Providing 30‐40mm lime plaster in two coats with 20mm base coat in lime mortar 1:1:1 (1 lime : 1Surkhi :1 Coarse Sand) and top coat in lime mortar 1:1:1 (1 lime : 1 Surkhi :1 Fine Sand) as per direction of Engineer-in-Charge

Plastering of the dome in lime mortar 1:2:1(1 Lime:2 coarse sand:1 surkhi ) up to 20mm thickness as per direction of Engineer-in-Charge

Providing and fixing limestone (Plastic Repairs) work for ornamental features, like urns, domes, parapets, chajjahs, fenials, cornices, lintels etc including dressing of stones, grooving, jointing, making keys overlaps etc, and fixing with (1:2) 10% pozzolonic lime mortar, anchoring with SS/timber dowels wherever fixed with lime mortar (1:1), pointing with lime mortar etc complete as per direction of Engineer-in-Charge

Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering upto floor two leveled and finished even and smooth in (iii) cement mortar 1:4 (1Cement, 4 sand)

Applying two coats of Birla (White cement based) or Asian ( arcylic lapy-putty) or equivalent & two coats of primer of approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth.

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give a required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials. etc complete

Ruled / Flush pointing on Red sand stone masonry surface with lime, surkhi and marble dust mortar in the ratio of 1:1.5:1/2 {One lime: 1.5 surkhi (50% red and 50% light yellow surkhi ) : 1/2 marble dust}. (The rate is inclusive of all materials, scaffolding & labours involved).

Providing and applying of Verona Vapour Permeable, water based Mature Lime wash finish of interior and exterior grade used for conservation and restoration of historical building, formulated by Mature Lime Putty with fillers by OIKOS India, After the cleaning of surface and removing any loose or flaking material, applied two coat of Verona Mature Lime wash finish by OIKOS India on one coat of Lime Based primer by OIKOS India of approved color and shade to achieve desired finish excluding the cost of surface preparation and scaffolding, apply by brush, roller and appropriate tools, as per manufacturer’s specification, all completes with the direction of Engineer-in-Charge

Providing, fixing and erecting the high strength, durable and corrosion resistance, MS Racks along with nontoxic finish including bolts and nuts, painting as per drawing and direction of engineer-in-charge.

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in- charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding.

Propping and supporting the structural elements and its adjoining areas with tubular steel props (adjustable or as required), bracings, steel runners etc. to relieve the structural member of the required load coming over it as per the pattern given by the contractor - Providing and fixing of tubular Steel prop of up to 4 MT capacity and up to 3.2 m heights as per directions of Engineer-In-Charge.

Propping and supporting the structural elements and its adjoining areas with tubular steel props (adjustable or as required), bracings, steel runners etc. to relieve the structural member of the required load coming over it as per the pattern given by the contractor - Providing and fixing of adjustable span ESO+SI (2.35-3.40) as per directions of Engineer-In-charge.

Post Top Light (45W): Supply ,installation ,commissioning & testing of Die-cast and sheet aluminun (UNI EN 1706).Refractive lens mod. 02 - road and mixed areas - classes CE-S. To access the optical and wiring compartment, unscrew the two screws on upper frame and rotate the bottom frame. During installation, follow the instructions for the correct orientation on the support. Lamp Source LED 5MacAdam L90B50,CRI 70,lumens for the light Real Lumen - 4500Lm,color temperature is 3000K,Mounting Accessories, Gel Connectors, Post Top,IP Protection IP66

ARCHITECTURAL POST TOP POLE :JM.06.18.010/ DW, Supply, Installation ,Commissioning of WINDSOR /GHM 3.5M height Pole made of mild steel pipe sections 114mm dia. & 76mm dia. Decorative Cast iron Base design with the company/brand logo engraved in the cast iron mould, starting with dia 260mm for 130mm height, followed by a ring of 260 dia gradually tapering to a flat round surface of dia 170mm for 366mm height again followed by a ring dia 210mm and gradual tapering upto a dia 92mm as approved by the concerned Engineer the total height of decorative cast iron base is 700mm and weight-32kgs.Decorative Top ring (weight-3kgs.) made of cast iron as well. All cast iron parts weight mentioned are with +/5% tolerance. Entire pole shall be made to provide pleasing aesthetics as approved

Post Top Light (73W): Supply ,installation ,commissioning & testing of Die-cast and sheet aluminun (UNI EN 1706).Refractive lens mod. 02 - road and mixed areas - classes CE-S.To access the optical and wiring compartment, unscrew the two screws on upper frame and rotate the bottom frame. During installation, follow the instructions for the correct orientation on the support lumens for the light Real Lumen -7300Lm,Beam angle Type II (NLG 20) color temperature is 3000K, Mounting Accessories, Gel Connectors, Post Top, IP Protection IP66

Supply, Installation, Commissioning of 9M height Twin arm Pole Made of hot dip galvanised mild steel pipe sections 140mm dia.,114mm dia.,& Heka Design Bracket which is made of hot dip galvanised mild steel pipe sections 89mm dia.(vertical) ,60mm dia.(horizontal) & 42mm dia.(Gradually bent ), to get 1200mm arm length - towards road side & 750mm arm length - towards pathway side & pleasing aesthetics. . Decorative Base(Heka) made of cast iron with Approx dia. of 325mm & 380mm(H) & with Approx weight of 20Kgs. Decorative Ring (140mm /114mm , weight- 5kgs.) made of cast iron. Top ring & Pole top are fabricated from hot dip galvanised steel to get pleasing aesthetics. Entire pole & bracket shall be made to provide pleasing aesthetics as approved by Concerned Engineer in-charge. After Fabrication, Entire Pole is hot dip galvanized(60 microns Minimum ) for the effective corrosion resistance . The hot dip Galvanised pole should be provided with an inbuilt junction box to fix 32A connectors and 6A MCB, at the bottom - the inbuilt box should have a flush door of suitable size. The decorative pedestal to be mounted on a suitable size steel plate. This mounting steel plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed RCC foundation. wind pressure calculation as per IS 875(part-3) & structural calculation report as per EN40 should be submitted to verify the pole design. Pole & it's parts are painted in 3 layer coating(coating thickness-100 microns minimum) in which 1st layer with etch primer, 2nd layer with epoxy primer & 3rd final layer with PU paint - customised colour Metallic Grey.

Supply ,Installation ,Commissioning of 9M height single arm Pole Made of hot dip galvanised mild steel pipe sections 140mm dia.,114mm dia.,& Heka Design Bracket which is made of hot dip galvanised mild steel pipe sections 89mm dia.(vertical) ,60mm dia.(horizontal) & 42mm dia.(Gradually bent ), to get 1200mm arm length - towrads road side & 750mm arm length - towards pathway side & pleasing aesthetics. . Decorative Base(Heka) made of cast iron with Approx dia. of 325mm & 380mm(H) & with Approx weight of 20Kgs. Decorative Ring(140mm/114mm , weight- 5kgs.) made of cast iron. Top ring & Pole top are fabricated from hot dip galvanised steel to get pleasing aesthetics. Entire pole & bracket shall be made to provide pleasing aesthetics as approved by Concerned Engineer in-charge. After Fabrication, Entire Pole is hot dip galvanized (60 microns Minimum) for the effective corrosion resistance. The hot dip Galvanised pole should be provided with an inbuilt junction box to fix 32A connectors and 6A MCB, at the bottom - the inbuilt box should have a flush door of suitable size. The decorative pedestal to be mounted on a suitable size steel plate. This mounting steel plate along with foundation bolts of suitable size to be used for ensuring firm grouting into the specially designed RCC foundation. wind pressure calculation as per IS 875(part-3) & structural calculation report as per EN40 should be submitted to verify the pole design. Pole & it's parts are painted in 3 layer coating(coating thickness-100 microns minimum) in which 1st layer with etch primer, 2nd layer with epoxy primer & 3rd final layer with PU paint - customised colour Metallic Grey.

Recessed Inground Column Up Light-(RG1-19.5W) Supply ,installation ,commissioning & testing of Floor recessed for outdoor use. For uplighting. Electronic components are in a sealed internal compartment, completely separate from the compartment where the connection terminals are located. The unit will withstand a static weight of 1,800 Kg and the occasional transit of slow-moving vehicles. Includes flush mounting box. Suitable for installation in marine environments. Includes 2 cable outlets to facilitate chain mounting. Adjustable light source. Structure material: Stainless steel AISI316, Aluminium. Structure finish: Polished, Black. Diffuser material: Glass. Diffuser finish: Transparent. UV protection. Ta max: 50ºC.wattage is 19.5W,CRI 80,Real Lumen -1636Lm,Colour Temp-3000K,ip protection IP67,brand of Ledsc4 Lighting, product code of GEA Power Led Pro Uplight recessed 55-9968-CA-CL.GEA Power Led Pro Uplight recessed Light source: LED CREE Output (W): 16WTotal power consumption (W): 19.5Color temperature: Neutral white -4000KCRI: 80Real Lumen: 1636Qty Leds: 6Lm/Real W: 84Life Time: 50.000h L90B10Bin / Grup: 5A3 o 5D2MacAdam steps: 2UGR: 9.7Photobiological risk: RG2 IP65/IP67 IK10 10º

Recessed Inground Column Up Light- Floor recessed for outdoor use. For uplighting. Electronic components are in a sealed internal compartment, completely separate from the compartment where the connection terminals are located. The unit will withstand a static weight of 1,800 Kg and the occasional transit of slow-moving vehicles. Includes flush mounting box. Suitable for installation in marine environments. Includes 2 cable outlets to facilitate chain mounting. Adjustable light source. Structure material: Stainless steel AISI316, Aluminium. Structure finish: Polished, Black. Diffuser material: Glass. Diffuser finish: Transparent. UV protection. Ta max: 50ºC..wattage is 19.5W,CRI 80,Real Lumen -1636Lm,Colour Temp-3000K,ip protection IP67,brand of Ledsc4 Lighting, product code of GEA Power Led Pro Uplight recessed 55-9968-CA-CL.GEA Power Led Pro Uplight recessed Light source: LED CREE Output (W): 16WTotal power consumption (W): 19.5Color temperature: Neutral white -4000KCRI: 80 Real Lumen: 1636Qty Leds: 6Lm/Real W: 84Life Time: 50.000h L90B10Bin / Grup: 5A3 o 5D2MacAdam steps: 2UGR: 9.7Photobiological risk: RG2 IP65/IP67 IK10 29º

Recessed In ground Column Up Light- (RG4-43.6W) Supply ,installation ,commissioning & testing of Floor recessed. For up lighting. Electronic components are in a sealed internal compartment, completely separate from the compartment where the connection terminals are located. The unit will withstand a static weight of 1,800 Kg and the occasional transit of slow moving vehicles. Includes flush-mounting box. Suitable for installation in marine environments. Includes 2 cable outlets to facilitate chain mounting. Cable meters included: 2.5. Adjustable light source. Structure material: Stainless steel AISI316, High purity aluminium. Structure finish: Polished, Black. Diffuser material: Glass. Diffuser finish: Tempered. UV protection.

Recessed In-ground Diffused Light-(RG2-0.5W) Supply, installation, commissioning & testing of Material -Polyester (UV stabilized), techno polymers/polymer concrete. 2mm wider load body protects the top body against impact from surrounding pavers. R13 highest non - lip glass. Citizen 7-led module, 0.5W. Hand casted into resin without air encapsulation. a) JOBE LIGHTING - Beck stone NATURE - One Block Design were in LED Module is Embedded in Synthetic Resign with NO Air Bubbles Inside, No Weak Rubber Links which protects against Condensation, Corrosion & Vandalism. Protective Polymer Concrete Base Layer with Drive Over Capacity. Custom Designed Rough Surface Paver of Dim : 4 x 4 x 2 3/8 " (97 x 97 x 60 mm) TRANSLUCENT FROSTED BODY, Color: 6500K, Input 9-15 V DC, Citizen LED Incandescent white, Power Consumption: 0.5W, Connection: 25cm /10 in direct burial cable, Class 3, IP68 Rated. b) CONNECTOR SET 88991000: Beck stone Connector Set along 5 min Installation process with 2x heat-shrinkable solder-sleeve 1x heat-shrinkable endcap requires heat-gun for Installation with electronic heat-gun like STEINEL HL 2010 E and STEINEL reflector nozzles 14mm #7461 and 39mm #07051.

LED DRIVER 88451500: LED Power Supply 12 VDC, 60W Rated Current 3.3A; Universal AC input /Full range (up to 305VAC);Built-in active PFC function; Protections: Short circuit / Over current / Over voltage / Over temperature; Cooling by free air convection; IP67 design for indoor or outdoor installations; Class 2 power unit; Suitable for LED lighting and moving sign applications; Compliance to worldwide safety regulations for lighting; Unrecognized; CE; Suitable for dry / damp / wet locations; Dim: 175x65x40mm (7x2.6x1.6 inches); Input/output Cable 30cm/1ft 18AWG 3C/2C . Ip65 Rated Junction Box Needs To Be Procured Locally (Not Included In Price)

ELECTRONIC HEAT GUN : 88992002Electronic Heat Gun 230VAC Variable Temperature Electronic Heat Gun: 120 F - 1100 F Powerful heat gun with variable temperature and electronic the Mts of couple control for flexible use and maximum reliability. Heating element ensures long life and even heat. 2000W at 230VAC Beck stone connector kit reflector nozzles for Beck stone heat-shrinkable connectors

Tree Up light - (SF & SF2)-13.1W Supply, installation, commissioning & testing of LED Spotlight for indoor and outdoor use. For down lighting.. Includes a goniometer to precisely adjust the angle of the luminaire. Includes drainage holes on the front of the head to avoid water accumulation and maximize the light's useful life. Structure with double body design to prevent heat generated by the LED affecting the useful life of the driver. Includes visor. Adjustable light source. Structure material: Aluminium. Structure finish: Urban grey. Diffuser material: Glass. Diffuser finish: Transparent. UV protection. Output (W): 11.5W Total power consumption (W): 13.1 Color temperature: LED warm-white 3000K,CRI: 80, Photo biological risk: RG1, Real Lumen: 1142,Lm/Real W: 87,Life Time: 50.000h L80B20,IP65 IK07 33º

Supply, installation, commissioning & testing of Pole Mounted Multisport Light- PT1 (36.1W) : For down lighting. Includes flush mounting box. Includes zoom system to regulate the angle of the beam without the use of tools. Includes 2 cable outlets to facilitate chain mounting. Adjustable light source. Structure material: Aluminium. Structure finish: Brown. Blades finishes: NA. Diffuser material: Glass. Diffuser finish: Transparent. UV protection. Real Lumen -3712Lm,91Lm/Temperature 3000K, wattage is 36.1W,Brand Ledsc4 Lighting, product code JUNCUS Streetlight 60-E057-J6-CL

Supply and laying of 4C X 25sqmm XLPE AL armored cable (PVC/XLPE ARMOURED Cables with ALUMINIUM Conductor 650/1100 V. grade confirming to IS : 7098 (Part-1) 1988)Supply and laying of 4 core 25 sqmm LT XLPE PVC insulated U.G armored Aluminium cable including cost, conveyance, all taxes and labour charges etc., complete and with cable route indicators. (Polycab / KEC / KEI / RGB / UNIFLEX / FINOLEX).Supply of 25 Sqmm 4 Core XLPE insulated, 1100V grade armored alluminium cable as per specification confirming to IS:7098 (Part - I)

Supply and laying of 4C X 16 sqmm XLPE AL armoured cable (PVC/XLPE ARMOURED Cables with ALUMINIUM Conductor 650/1100 V. grade confirming to IS : 7098 (Part-1) 1988)Supply and laying of 4 core 16 sqmm LT XLPE PVC insulated U.G armoured Aluminium cable including cost, conveyance, all taxes and labour charges etc., complete and with cable route indicators.

Supply and laying of 4C X 6 sqmm PVC insulated U.G armoured copper cable including cost, conveyance, all taxes and labour charges etc., complete and with cable route indicators. (Polycab / KEC / KEI / RGB / UNIFLEX / FINOLEX).4C X 6sq.mm PVC copper cable (PVC / XLPE ARMOURED Cables with COPPER Conductor 1100 V. Grade confirming to IS : 7098 (Pt-1) 1988)

Supply and laying of pvc conduit pipes outside diameter of 75mm for the 4Core 25sqmm ,4Core 16sqmm,4Core 6sqmm cables passes through the pathway

Supply and Laying of Cable Gland for 4C X 25sqmm, 4C X 16sqmm and 4C X 6sqmm(CU) XLPE AL armoured cable ,Supply and Fixing of single compression brass cable glands for 4 core XLPE armoured cable from 25 Sqmm with brass washers complete. Make (Comet / Electromac)

Supply and fixing of ALUMINIUM LUGS FOR 4C X 25 Sqmm and 4C X 16 Sqmm Cable ,Supply and fixing of crimping type aluminium lugs confirming to I.S specifications for cable of 25 sqmm including nuts and bolts with connections.

Supply and fixing of Copper Lugs FOR 4C X 6 mm sq CABLE, Supply and fixing of crimping type aluminium lugs confirming to I.S specifications for cable of 6 sqmm including nuts and bolts with connections.

80A 3P 30kA MCCB,TMD (Fixed Thermal Magnetic) Release,Type: EasyPact EZC,Red Color LED Indicator 22.5 mm, Voltage: 220V AC,Yellow Color LED Indicator 22.5 mm, Voltage: 220V AC,AC3: 80A AC1: 110A 3P Power Contactor,Coil: AC ,Aux. contact: 1NO+1NC,3 Phase Multi Function meter (4x1 line Display),75/5A 5VA Tape Wound Acc. Cl: 1 Current Transformer, ID: 30mm,6A 1P 10kA C-Curve MCB,Type: xC60,Digital timer with 15 functions and 8 Time ranges,32A 3P 10kA C-Curve MCB,Type: xC60

TPN 32Amps 10ka MCB of Cat no DHMGDFPF006-032

Supply , installing and testing TPN Metalica Distribution Board for lighting with 4way model number of DHDNTHODAW06,HSN Code - 8537,IP65

Providing independent earthing by excavating a trench to a depth of 2.1 M in soils, using 16mm dia copper pipe of 3 Mtrs length with necessary accessories with hume pipe. Including of supply and labour charges complete

Providing and making Cable Chambers in brick work with heavy duty cover are arranged at the curve edge of the roads for cable pulling purpose having the dimensions of 300mm X 300mm including of labour charges

Supply and fixing of the two 6/16amps socket and 6/16amps switch for the external utility purpose

Termination, removal by dismantling LED light poles, removal of poles along the road with removal of Junction boxes including technician and labour charges and placing the serviceable material at suitable place as per the direction of engineer incharge .

Removal of Existing High-Mast pole

Supply ,Installation ,Commissioning & Testing of Recessed Inground Column Up Light-GEA Power Led Uplight recessed Light source: LED LUMILEDS Output (W): 9WTotal power consumption (W): 11WColor temperature: Warm White - 3000KCRI: 85Real Lumen: 796Nominal Lumen: 873Qty Leds: 9Lm/Real W: 72Life Time: 50.000h L70B30Bin / Grup: POMacAdam steps: 3 STEPSUGR: 11.0Photobiological risk: RG0 IP67 IK10 16º,model number of 55-9665-CA-CL. including electrical wiremen charge to fix the light

Supply, Installation, Commissioning & Testing of LED strip for indoor use. For uplighting. Aluminum profile and silicone diffuser included. Structure material: Aluminum. Structure finish: Matt. Diffuser material: Polycarbonate. Diffuser finish: Transparent. ION Led strip Light source: LED HONGLITRONIC Output (W): 28WColor temperature: Warm White - 3000KCRI: 80Real Lumen: 1878Qty Leds: 120Lm/Real W: 67Life Time: 50.000h L70B30Bin / Grup: Y3 o Y5MacAdam steps: 3UGR: 25.7Photobiological risk: RG0 IP68 (1m) IK08 120º including electrician charges.

Surface Mounted Down light - Supply, Installation, and Commissioning & Testing of Stylish adjustable projector range. Naturally beautiful and unique contemporary family, ODESSA packs a punch with an abundance of options and accessories. Die-cast aluminum housing pre-treated before powder coating ensuring high corrosion resistance. Single cable entry. Through wiring on request for OD-50011, OD-50012. Stainless steel fasteners in grade 316wattage of 11Watts LED,CRI 80,Real Lumen - 816Lm,color temperature of 3000K,beam angle is 47°,IP protection is IP66,Brand of Ligman Lighting, Product code is ODESSA 1 OD-50002. including electrician charges to fix the one light.

KELVIN BRAND HDPE PIPE IS:4984:1995, 50mm diameter HDPE pipe for cable laying under the groung including Electrical Helper Charges

supplying and installing TPN 6- 32Amps 10ka MCB of Cat no DHMJDFPF006

TPN Metalica Distribution Board for lighting with 8way model number of DHDNTHODAW04,HSN Code - 8537,IP65 including Erection or fixing of the Lighting Panel charges

Supply and laying of 1.5 Sqmm 3 Core PVC insulated, 1100V grade armoured copper cable as per specification confirming to IS:7098 (Part - I) Makes: KEC / FINOLEX / Unicab / Havells / KEI / Polycab including Labour charges for laying

Supply and Fixing of single compression brass cable glands for 4core PVC armoured Copper cable from 6 Sqmm with brass washers complete, Make (Comet / Electromac) including Cable lugging Charges

Supply and fixing of crimping type aluminium lugs confirming to I.S specifications for cable of 6 sqmm including nuts and bolts with connections including Cable Lugging Charges

savani heritage conservation private limited

Sarjan Construction Pvt Ltd