REPAIRS TO CGI SHEET, ROOF LEAKAGE, JOINERY AND MISC REPAIRS TO TEMPORARY BLDGS/ BILLETS IN SOUTH CAMP AT AFS UNDER GE(AF) SAMBRA

Taking down shutters exceeding not exc 1sqm each and refixing in the same opening including necessary welding/screwing of hinges to pressed frame or PVC door frame complete all as specified and directed.

Taking down shutters exceeding 1 Sqm but not exceeding 2 Sqm each and refixing in the same opening including necessary welding/screwing of hinges to pressed frame or PVC door frame complete all as specified and directed.

Taking down and removing shutters of any description not exc 1 Sqm complete all as specified and directed.

Taking down and removing shutters of any description exc 1 Sqm but not exc 2 Sqm complete all as specified and directed.

Taking down chowkats or frames not exc 1.5 sqm each (without taking of shutters from the frame) complete all as specified and directed.

Taking down chowkats or frames exc 1.5 sqm but not exc 4 Sqm each (without taking of shutters from the frame) complete all as specified and directed.

Taking down cement plaster on brick/concrete/stone masonry walls etc incl racking out joints, hacking for key, scrubbing down with water etc complete including removing rubbish off the premises complete all as specified and directed.

M&L for rendering 15 mm thick on stone masonary surfaces or surface other than fair face of brick work or on one side of lathing for wall in CM 1:4 to be finished even & fair complete all as specified and directed.

M&L for rendering 15 mm thick on stone masonary surfaces or surface other than fair face of brick work or on one side of lathing for wall in CM 1:6 to be finished even & smooth wihtout using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper on walls over a coat of alkali-resistant priming paints over 3mm thick wall care putty complete all as specified and directed.

M&L for preperation newly plastered surfaces of wall and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior weather proof paint of required shed (company Depot tinted) with silicon additives @ 1.43 litre / 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm on walls, pillasters, cornices, drops, chajjas etc., complete all as specified and as directed.

S&F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints with second classs hard wood etc., complete all as specified and directed.

M&L for cutting holes in brick/ stone walls built in cement mortar for inserting hold fasts of depth of embedded portion exc half brick but not exc one brick from the face of the jamb in to the wall and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.

S&F factory made 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides fixed to chowkats complete all as specified and directed.

S&F factory made 30mm thick second class hardwood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather eged), or of veneered particle board medium density, wood particle board witn commercial face veneers; supplied and fitted to chowkats complete all as specified and directed.

S&F second class hardwood glazed and skeleton shutters, 30mm thick, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc; sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed.

S&F 300mm Aluminium alloy, anodised sliding door bolt with hasp and stapple bolt type complete all as specified and directed..

S&F 250mm Aluminium alloy, anodised sliding door bolt with hasp and stapple bolt type complete all as specified and directed..

S&F 150mm long aluminium anodised handle cast type complete all as specified and directed..

S&F 150 mm long aluminium anodised barrel tower bolt complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description over 10cm width or girth including necessary preparation of surface complete all as specified and directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 50 x 75 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicityindex of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed.

S&F 100 mm long aluminium anodised handle cast type complete all as specified and directed.

S&F 100 mm long aluminium anodised barrel tower bolt complete all as specified and directed..

S&F 100 mm long butt hinges medium weight cold rolled fixed to door frame complete all as specified and directed.

S&F in repairs 300mm Aluminium alloy, anodised sliding door bolt with hasp and stapple bolt type complete all as specified and directed.

S&F in repairs 25 mm Aluminium alloy, anodised sliding door bolt with hasp and stapple bolt type complete all as specified and directed..

S&F in repairs 150mm long aluminium anodised handle cast type complete all as specified and directed.

S&F in repairs 100mm long aluminium anodised handle cast type complete all as specified and directed.

S&F in repairs 100mm long aluminium anodised barrel tower bolt complete all as specified and directed..

S&F in repairs 150mm long aluminium anodised barrel tower bolt complete all as specified and directed. .

S&F in repairs 100mm long butt hinges medium weight cold rolled fixed to door frame complete all as specified and directed.

S&F in repairs 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate fixed to wooden or mild steel frame with bolting / welding complete all as specified and directed.

S&F in repairs floor door stopper of aluminium alloy body and tounge, anodised, with hard drawn steel spring 140mm long complete all as specified and directed.

S&F in repairs brass mortice lock, vertical type, size 100mm, 6 levers complete all as specified and directed.

S&F in repairs double action floor spring hydraulically regulated made up of aluminium 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

S&F in repairs door closer cast iron body hydraulically regulated designation No 3, universal type suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 kg complete all as specified and directed.

S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or steel screws or aluminium beading complete all as specified and directed.

S&F in repairs figured glass, pin head type 4 mm thick, not exceeding 0.5 Square Metre for each pane, glazing with oil putty or beading including hacking out old broken glass (any thickness, size, quality and description) complete all as specified and directed.

S&F in repairs sheet plain glass 4 mm thick, ordinary quality, in squares not exceeding 0.5 Square Metre for each pane, glazing with oil putty or beading including hacking out old broken glass (any thickness, size, quality and description) complete all as specified and directed.

S&F in repairs hasp and staple, safety type, 100mm stainless steel including bolt to hinge plate and fixed with bolts or welding as per site condition complete all as specified and directed.

S&F in repairs SS handles of size 100mm (stainless steel) fixed with nut & bolts or welding as per site condition complete all as specified and directed.

S&F in repairs mild steel hinges 75mm long suitable for mild steel cup boards fixed with nut & bolts or welding as per site condition complete all as specified and directed.

S&F in repairs casement stays, size 300mm, with hinged joint and two plates, with studs suitable for steel windows and ventilators complete all as specified and as directed.

S&F Anodised aluminium powder coated frame for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc. complete all as specified and directed.

S&F powder coated, anodised aluminium door shutters, aluminium sections weighing 0.55 Kg/m including necessary jointing cleats, glazing clips, rubber packing, handles 2 nos, in each door hinges, aluminium anodised snap beading screws etc and necessary packing materials complete all as specified and directed.

S&F door closer cast iron body hydraulically regulated designation No 3, universal type suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 kg complete all as specified and directed.

S&F brass mortice lock, vertical type, size 100mm, 6 levers complete all as specified and directed.

S&F in repairs sheet plain glass 5.5 mm thick, ordinary quality, in squares not exceeding 0.5 Square Metre for each pane, glazing with oil putty or beading including hacking out old broken glass (any thickness, size, quality and description) complete all as specified and directed.

M&L for 12mm thick prelaminated particle board, interior grade, prelaminated both sides fixed with screws to frame work as in ceiling and wall panelling complete all as specified and as directed,

S&F powder coated, anodised aluminium window Three Track shutters sliding type, without sash bars, aluminium sections weighing 0.55 Kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium powder coated snap beading, aluminium anodised fittings roller wheels, spring catcher, for sliding type shutters and necessary packing materials etc including Aluminium Lock grill complete all as specified and directed.

S&F aluminium windows and ventiators shutters/ Al louverd Strip powder coated (minimum thikness of powder coating 50 micron), side/top hung type without sash bars, aluminium sections of not less than 60mm width and 1.5 mm thick including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium powder coated snap beading, screws, anodised aluminum fittings such as peg stays 150mm long ( 1 No. per window), hinges 75mm long (3 Nos) , suitable handle (1 No.) complete all as specified and directed

S&F Anodised aluminium grills of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass / stainless steel screws @200 centre to centre, including cutting the grills to proper opening size for fixing and operation of handles and fixing fixing approved anodised aluminium standard section around the opening complete all as specified and directed.

S&F sheet plain glass 4 mm thick, ordinary quality, in squares not exceeding 0.5 Square Metre for each pane, glazing with oil putty or beading including hacking out old broken glass (any thickness, size, quality and description) complete all as specified and directed.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or steel screws or aluminium beading all as specified

S&F figured glass, pin head type 4 mm thick, not exceeding 0.5 Square Metre for each pane, glazing with oil putty or beading including hacking out old broken glass (any thickness, size, quality and description) complete all as specified and directed.

S&F in repairs steel window / ventilators with side / top hung shutters including projecting type hinges with steel handle, steel peg stay, complete with glazing bars dovetailed or welded complete all as specified and directed.

Taking down and refixing only in repairs steel window / ventilators shutters including necessary repair work and welding if required complete all as specified and directed.

S&F in repairs stainless steel curtain rod 25 mm dia, 1.25mm wall thickness complete all as specified and directed.

S&F stainless steel brackets suitable for 25mm dia curtain rod and decorative stainless steel stops/ rollers fixed to ends of SS pipe complete all as specified and directed. Note: Each pair inclusive of two numbers of stainless steel brackets and two numbers of decorative stainless steel stops/roller/end cap.

S&F in repairs ball bearing for rolling shutter in new or repair work complete all as specified and directed.

S&F in repairs Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets complete all as specified and directed.

Taking down and refixing of rolling shutter any type and thickness including necessary repair work, welding , greasing, oiling and changing any damaged parts complete and making functional complete all as specified and as directed.

S&F 12mm thick Gypsum board in ceiling as per manufacturer instruction over and including powder coated aluminium snap grid frame work (size of grid 605 x 605mm) supported by hangers 2-4 mm dia GI (up to 1200mm length /as per site requirement) adjusting level fixed to roof slab/walls/wooden/steel members by means of ceiling cleats made out of GI flat 40x3mm size 60 cm long and expansion hold fasteners 12.5mm dia 40mm long and painting two coats of oil bound distemper over a coat of primer and preparatory work including dismantling wall and ceiling boards (fibre, pulp, insulation, etc.,) or insulation boards/slabs/blankets, any thickness including cover fillets and frame work complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls and applying one coat of oil bound distemper complete all as specified and directed

M&L for preparation of old painted wooden surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

M&L for preparation of new or previously untreated steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

M&L for preparation of old painted steel surfaces of any description, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

S&F mild steel or cast iron hooks 50mm to 60mm fixed on MS or wooden plates for hanging cloths fixed on walls including necessary painting complete all as specified, (Note: each hook on plates measured separately) complete all as specified and directed

Restraining and resecuring of any dia of wire for moisquito net / drying cloths including making good staples, hooks, bolts eyes complete all as specified and directed

S&F plain mild steel wire, 3.15mm dia, galvanised class 3, in detached work such as for mosquito nets and including straining bolts, hooks, eyes fixed to wall, securing with and provision of galvanised iron tying wire of hanging portion with ceiling with galvanised iron staples or steel pins complete all as specified and directed

S&F pre painted galvalume Aluminium Zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws including takingdown exiting unserviceable corrugated asbestos sheet as in roof complete all as specified and directed.

S&F pre painted galvalume Aluminium Zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as including takingdown exiting unserviceable corrugated asbestos sheet as in ridges complete all as specified and directed.

S&F in repairs tubular brass chromium plated Towel rail 20mm dia "D" type 60cm long between flanges complete all as specified and directed

S&F PVC Half Round 160mm Rain water Gutter eaves complete all as specified and as directed

S&F PVC 160mm Runner Drop complete all as specified and as directed

S&F PVC Stop End Drop 160x110mm complete all as specified and as directed

S&F in repairs 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed in wall with necessary mild steel clamping where required complete all as specified and directed

Please Enable Macros to View BoQ information