Development and Renovation of 7 Nos of Park sec 15 part 1 and 3 nos parks in sec 30, ward no 19

Amount

NS Item

merry go round 4 seater 5dia main frame is m s sq pipe round pipe centrel pipe which further pipe supports with pipe ball bearing assembly chair made of molded frp plastic pu primer and pu paints

Providing laying grit wash consisting of 12mm coarse sand plaster and 5mm to 10mm Narnaul/ Dehradun etc. quarry mix with in 3 parts of cement

Providing laying grit wash consisting of 12mm coarse sand plaster and 5mm to 10mm Narnaul/ Dehradun etc. quarry mix with in 3 parts of cement…..

6 No. Ornamental Design FRP Molded Pillar FRP base pedestal with vertical fitted design having base width of size 260mm x 260mm and height 900mm having 4 no. of size 20mm drilled in the base with hold fasts and having B class vertical m.s pipe of size 88 mm and height 2890mm, the central m.s pipe holds FRP Molded taj 6no of size 260 x 260 x 210mm high suitably mounted at appropriate height complete as per design. Complete pillar suitably grinded and subsequently spray painted with two coats of P.U Paints in required shade.

Double Cross Walker/ Cross trainer double:- Providing, and fixing Double Cross Walker of size 1600 X600 X 1600 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40 mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding ithminimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used hall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Officer -in-Charge. Complete in all respect.

Providing and fixing mono block motor 1HP and make Texmo complete in all respect

Bridge Ladder: 10’L x 2’W x 6’H. Horizontal ladder is of m.s pipe 2”, ¾” & vertical ladder is of same material of 12 gauge ISI mark with suitable PU Primer & PU Paints. Complete item with GST, Transportation, Installation with C.C & labor at site.

KneeHip Raise and fixing Knee Hip Raise of size 1105 X 550 X 11480 mm make of Green Gym or Equivalent fabricated with main post of 140 rum din and 3.0 mm thick rest or the pipes are 40mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Mao Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped

Providing and fixing of precast GRC paving tiles M-40, 25 mm thick, including cement mortar and laying, complete in all respect

rate of removal and repair & Re-fixing of M.S. L-Iron wire mesh jail, complete in all respect

Providing and fixing of aluminium channel of size 12mm x 12mm x 1mm with steel screw on face of wall with grit wash including cost of all material all taxes, carrage, labour for fixing aluminium channel cost of shuttering and scafolding and labour preparation of surface complete as per direction of engineer in charge

Providing and fixing precast concrete benches L shape base support in grey cement thickness 100mm back height 1000mm front 450mm . Size 1500x100x50mm

Supply and Planting Trees including digging of holes, cost of loading, unloading and planting in position, preliminary watering and labour cost complete in all respect. Ficus Black. @

Supply and stacking of plant Ficus panda of height 45-60 cm with 6-7 branches and healthy foliage in p. bag of size 25 cm.

Supply of RH Pipe 1" dia.

Twister:- Providing, and fixing Twister of size 1700 X 1300 X 1300 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary

Washed stone grit plaster on exterior walls of height upto 10 metre above ground level, in two layers, under layer 12mm cement plaster 1:4 (1cement: 4 coarse sand ), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand :2 stone chipping 10mm nominal size), in panels with groove all around as per approved pattern, including scrubbing and washing the top layer with brushes and water to expose the stone chippings, complete as per specification and direction of Engineer-in- charge (Payment for providing grooves shall be made separately).

Twister:-Providing, and fixing Twister of size 1700 X 1300 X 1300 mmmake of Green Gym or Equivalent fabricated with main post of140 mm dia and 3.0 mm thick rest of the pipes are 40mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with inimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Officer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and ishapod welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Officer -in-Charge egarding material, shape of equipment, colour on metal, seat and base cover plate and Q69fixing of. equipment etc."

(i) 6 No. Ornamental Canopy Design FRP pillar FRP base pedestal with vertical fitted design having base width of size 260mm x 260mm and height 900mm having 4 no. of size 15mm drilled in the base with hold fasts and having B class vertical m.s pipe of size 89 mm and height 2890mm, the central m.s pipe having FRP capital sign enclosed. Complete pillar suitably grinded spray primered and subsequently ( HIMCON 425000)

Chain Swing (2 seater): 10’L x 5’.5W x 8’.5 H. Horizontal frame & vertical legs is of m.s pipe 2” x 12 gauge. It stays with m.s pipe 1” x 12 gauge. Swinging seats-2 nos is of FRP molded Seat of 2mm thick fitted with m.s pipe ½” frame x 12 gauge which hang with m.s chain 6mm thick duly plated with ball bearing & m.s flat 6mm thick housing with suitable PU Primer & PU Paints.

FRP Dustbin (Penguin Shape) - Animal figure made of FRP moulded plastic of 2mm thick of approx.size 48”H with having 1no inlet and outlet with suitable PU Paints. Complete item with GST, Transportation, Installation with C.C & labor at site ss

Hiring of labour as per DC rates

Providing and fixing of SS gate 304 Grade

providing and laying of 12mm aliuminium channel include fixing of wall to specified spacing and pattern for grit wash

Pull Chair:- Providing, and fixing of Pull pair of size 2500 X 800 X 2000 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pes are 40mm dia and 3.0 mm thick all pipes made up of hot roiled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc .primer paint to be applied at all welding points prior to finishing. Pedals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be' made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Officer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GULLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of EIC.

Bidder Name

Amount

M/s Sami Greenmax Landscape Pvt. Ltd.(GSTN-06AAPCS4484A1Z9)

agrisense landscape(GSTN-06AJIPS5096F1ZU)

M/s Lakshay and Company(GSTN-NA)

M/s Sami Greenmax Landscape Pvt. Ltd.

agrisense landscape

M/s Sami Greenmax Landscape Pvt. Ltd.

agrisense landscape