REPAIRS TO FLOORING, ROOFING, CEILING AND CERTAIN MISC B/R ITEMS UNDER GE MISSAMARI

Amount

Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frames) complete all as specified and directed.

Taking down Chowkats or frames exceeding 1.5 Sq. M but not exceeding 4 Sq. M each (Without taking off shutters from the frame) complete all as specified and directed.

Dismantling Unframed timber scantlings 40 Sq. cm and over in section and in any position complete all as specified and directed.

M&L for 2nd class hard wood in scantling wrought timber unframed and fixed complete all as specified and directed.

Dismantling fillets, rails, posts, rafters, purlins etc. under 40 Sq. cm in section complete all as specified and directed.

S&F second class hard wood plain fillets in rectangular or triangular in section, clean swan secured with screws or beads sectional area exc.13sq cm but n.exc.25 sq cm complete all as specified and as directed.

S & F factory made Second class hard wood kiln seasoned and chemically pressure treated plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F 30 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides.

S & F 35 mm thick factory made Second class hard wood kiln seasoned and chemically pressure treated Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc.complete all as specified and directed.

M&L for Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded granite stone aggregate) as in hold fast complete all as specified and directed.

S&F mild steel flat iron of size 50x3mm as in hold fast complete all as specified and directed.

Hacking out old broken glass ( any thick ness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and provoding and fixing new ones complete all as specified and directed.

S&F 3 mm thick Sheet glass, ordinary quality and glazing with wooden beads in squares not exceeding 0.5 Sq. M in each pane complete all as specified and directed.

S&F in repair GI wire cloth with 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium stapple complete all as specified and directed.

S&F GI wire cloth with 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium stapple complete all as specified and directed.

S&F 100 mm long medium weight, cold rolled mild steel Butt hinges and fixed complete all as specified and directed.

S&F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 300 mm long MS sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts complete all as specified and directed.

S&F in repairs Harrison rails, mild steel, chromium plated fixed alongwith 2 Nos. of brackets, stops, rollers etc, complete all as specified and directed.

Dismantling floor, hearth or wall tiling incuilding cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises complete all as specified and directed..

S&F Glazed ceramic coloured tiles in vertical surfaces 450x 350x 7 mm thick set and jointed in neat cement slurry & painted in white or colour cement to match incl backing coat of 10 mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including Screed 15mm thick bed or bedding layer of cement mortar 1:6, for laying floor finishes complete all as specified and directed.

M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including 15mm thick Screed bed or bedding layer of cement mortar 1:6, for laying floor finishes complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc.complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry built in cement mortar or cement lime mortar including removal to rubbish complete all as specified and as directed.

M&L for brick work with fly ash modular bricks built in cement mortar 1:6 straight or curved on plan exceeding 6mtr mean radius complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surface in CM (1:4) with water proofing compound @2% by weight face of conc work to wall surface and the surface is finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on other than fair faces of brick or concrete Surfaces in Cement Mortar 1:6 finished even and smooth complete all as specified and directed.

Supply only Integral water proofing compound.

Dismantling plain or corrugated asbestos cement sheeting any gauge, thickness in roof covering complete all as specified and directed.

S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

S&F pre painted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets complete all as specified and directed.

S&F Anodised aluminium/ GI snap grid power coated framed work of size main runner 39x24.70x0.80 mm, cross tee size 29.x24.70x0.80 mm, wall angle 22.2x22.2x0.65 mm and size of grid 605x605 mm for false ceiling all as specified with 4mm thick GI suspender complete all as specified and as directed.

M&L for 4m thick Non Asbestos designed Cement E board incl two coats of distempering in one side as approved by GE of size fixed in ceiling complete all as specified and directed.

M&L for preparation of new surfaces of walls by brooming down or by steel wire brushing and applying three coat white wash complete all as specified and directed.

M&L for preparation of old surfaces of walls by brooming down or by steel wire brushing and applying one coat white wash complete all as specified and directed.

M&L for preparation of new or previously treated wooden surfaces of any description, over 10 cm width or girth, not otherwise described applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M/s Miza Enterprises

Garg Brothers