Repair to wall, joinery, sanitary fittings and other misc work for OTM/Md accn of JCOs/OR for 22 Mech inf, 861 Missile, 58 Armd Bde Signal Coy and 106 (I) Comp Pl at Mil stn Kapurthala under GE Kapurthala

Amount

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc.

Demolition of brick work or stone/ boulder Masonry, built in cement mortar including all quoins, pillars etc.

Material and labour for brick work built in cement mortar (1:6) with sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 m to mean radius complete all as specified and as directed by the Engineer-in-Charge.

Demolition of cement concrete in ground floor and paving n exc 15cm thickness (below or above the ground level) built in cement mortar.

Demolition of cement concrete in shelves, floors (other than ground floors), beams, landing, chajjas and similar suspended works including cutting reinforcement as required facilitating demolition complete all as specified and directed by Engr-in-Charge.

M&L for RCC 1:1 1/2 :3 type A-0 using 12.5 mm graded crushed stone aggregate as in chajjas etc. and the like including 5mm thick rendering in CM 1:3 finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge including necessary scaffolding for ground floor and 1st floor.

M&L for mild steel bars 6-8mm dia, cut to length, bent to shape required, including cranking,bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Use and waste of formwork to chajjas and similar items including edges rough finished surface of concrete flat complete all as specified and directed.

Material & Labour for 75 mm thick Cement concrete type C1, 1:3:6 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing and plinth protection..

Material & Labour for 25mm thick PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate), as in sub floors, sub base; concrete surfaces finished even & fair to receive topping floor finish/layer all as specified & directed.

Material & Labour for Rendering 10 mm thick on fair faces of walls of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth complete all as specified and as directed.

Material & Labour for Rendering 15 mm thick on other than fair faces of walls of brick work or concrete surfaces in cement mortar 1:4 with water proofing compound finished even and smooth complete all as specified and as directed. Note: water proofing compound shall be measured seprately.

Material & Labour for Rendering 5 mm thick cement plaster in cement mortar (1:3) on brick or concrete surfaces of soffits of chajjas, roof projections or ceiling and finished even and smooth without using extra cement complete all as specified and directed .

Material & Labour for Preparation of newly plastered wall surfaces and applying two coats of distemper oil emulsion over and including one coat of birla putty 1mm thick preparatory to distempering complete all as specified and directed.

Material & Labour for prepration of newly plastered surface and applying two coats of cement base paint including necessary base prepration as directed

Material & Labour for Three coat of white wash on plastered/unplasterd surface on ceiling including preparation of new plastered surface complete all as spd and directed.

Material & Labour for preparing old painted plastered surfaces on wall by washing rubbing down and applying two coats of distemper oil emulsion over one coat of birla putty 1mm thick preparatory to distempering complete all as specified and directed.

Material & Labour for Preparing old plastered or unplastered wall surfaces on wall after complete removal of existing treatment and applying two coats of cement base paintover wall all as directed

Material & Labour for Preparing old plastered or unplastered surfaces on ceiling after complete removal of existing treatment and applying two coats of white wash all as directed

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation board/slabs/blankets/AC boards etc any thickness .

Supply & fix Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. (Size of grid 605X605 mm) complete all as specified and directed.

Supply & fix 4 mm thick Non asbestos fibre cement building boards(designer) fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and directed.

Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frame).

Taking down Chowkats or frames exceeding 1.5 Sqm but not exceeding 4.00 Sqm each (Without taking off shutters from the frame).

Taking down Shutter exceeding 1.0 Sqm but not exceeding 2.00 Sqm each.

Taking down Shutter exceeding 2.0 Sqm each.

Supply and fix Pressed steel frames factory made for doors out of 1.25mm thick PBI sheet with one of more rebates including necessary flat iron lugs, hinges, lock strike plate, hinges etc complete, size of frame 105x60mm including tarring ends and back of chowkats and lugs including back filling of PCC 1:3:6 for chowkats & PCC1:2:4 for block for hold fast including two coats of synthetic enamel paint over a coat of red oxide primer on exposed surfaces complete all as specified and as directed by the Engineer-in-Charge.

Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall Exc. half brick but not exc. one brick

Supply & fix Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165

Supply and fix 40 mm thick factory made plain, framed, panelled shutters (any number of panels) second class hard wood (Hollock/Bonsum/Champlas) door shutters with panels of timber flat on both sides (feather edged), or veneered particle board medium density, wood partcle board with comercial face veneers or 9mm thick BWP commercial ply complete all as specified and directed by the Engineer-in-Charge.

Supply and fix 35mm thick glazed and skeleton shutters of 2nd class hard wood (Hollock / Bonsum / Champlas) open rebated and prepared to receive glass gauze etc without sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I Sec 8 clause 8.24 (a) complete all as specified and directed by the Engineer-in-Charge.

Supply & fix Factory made Solid PVC Moulded Door Shutter 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 5mm thick Moulded Prelam PVC Sheet on the front face & 2mm thick Plain colour PVC sheet on the back face complete as per specification & all as specified and directed.

Supply & fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification, drawing of SSR.

Supply & fix of Factory made PVC panel door shutter 28 to 30 mm thick (style) consisting of PVC sheet panel inside stiles and rails and decorative PVC beading of 10mm x 10mm (900) frame made out of MS tubes for top & bottom rails.The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly. MS frame shall be covered with heat moulded decorative colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, suppling & fixing in the frame at site as per specification & drawing in SSR Part II. Make : Rajshree/Sintex

All as per item No. 34 above but wire gauzed i.e. panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly .

Supply & fix Powder coated Anodised aluminium frame (Thickness of powder coating not less than 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

Supply & fix Powder coated Anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified.

Supply & fix Powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.) hinge type B-21 100mm long (2 Nos) suitable handle (1 No.) complete all as specified and directed.

S & F Aluminium (die cast body) Door closer hydraucially regulated designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S & F steel window/Vent 1.25mm thick Box type ( primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises glazed Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:3:6) type C-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Mild Steel Hold Fast,150mm long of 12mm Square bar made to shape – 04 Nos per window (b) Handles of Z Sec 20mm x 100mm long (c) stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 No per leaf (e) Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf (f) Grills made out of MS square bar 12mm dia welded to FI frame complete all as specified and shown on drawings. Note: Glass and painting and MS grills shall be measured and paid separately under appropriate item (ii) Irrespective of whatever shown on drgs, MS gills shall be of 12mm dia MS square bar.

Supply & fix steel window 1.25mm thick Box type ( primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises gauged Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:3:6) type C-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Mild Steel Hold Fast,150mm long of 12mm Square bar made to shape – 04 Nos per window (b) Handles of Z Sec 20mm x 100mm long (c) stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 No per leaf (e) Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf (f) Grills made out of MS square bar 12mm dia welded to FI frame complete all as specified and shown on drawings. Note: Wire mesh and painting and MS grills shall be measured and paid separately under appropriate item etc complete all as specified and directed.

S & F framed work such as grills, grating, etc., with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work or water tanks and similar work conforming to Fe 410-0 or Fe 310-0 all as specified and directed by Engineer - in - Charge.

Supply & fixglavanised MS wire cloth, 0.56mm nominal dia of wire and average with of aperature 1.00mm and fiexed with tinned tacks or galvanised wire staples.

Supply & fix in repair glavanised MS wire cloth, 0.56mm nominal dia of wore and average with of aperature 1.00mm and fixed with tinned tacks or galvanised wire staples.

Supply & fix 100mm Butt hinges, medium weight cold rolled and mild steel and fixed

Supply & fix in repair 100mm Butt hinges, medium weight cold rolled and mild steel and fixed including necessary welding

Supply & fix 125 mm long aluminium handles, cast type, anodised

Supply & fix in repair 125 mm long aluminium handles, cast type, anodised

Supply & fix 200 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed

Supply & fix in repair 200 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed

Supply & fix 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

Supply & fix in repair 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

Supply & fix Floor door stopper of aluminium alloy body and tongue, anodised, Overall length of cover plate 140 mm , with hard drawn steel spring, fixed in floor

Supply & fix in repair Floor door stopper of aluminium alloy body and tongue, anodised, Overall length of cover plate 140 mm , with hard drawn steel spring, fixed in floor

Supply & fix in repair mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate including necessary welding complete

Supply & fix in repair150 mm Hasp and staple, aluminium anodised, wire type, including bolt to hinge plate and fixed with screws

Material & Labour for Preparing Old/new steel painted surface to receive painting, including washing and cleaning, etc. over 10cm in width or girth, not otherwise described & applying one coats of synthetic enamel paint (Comboflauge) over one coat of red oxide complete all as specified and directed.

Material & Labour for Preparing Old/new wood and wood based surface to receive painting, including washing and cleaning, etc. over 10cm in width or girth, not otherwise described & applying one coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Securing glass of any description in existing metal frames glazed with putty/ beads including removing loose or decayed putty/ beads, painting /oiling one coat on rebates, grooves,reputtying old glass of same place, fixing and painting/ oiling puttied surface to match existing work with complete all as specified and directed.

Securing broken glass of any description in existing metal frames glazed with putty/ beads including removing loose or decayed putty/ beads, painting /oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work and Supply & fix sheet glass ordinary quality 4mm thick in squares n exc 0.5 sqm each pane and glazing with complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.

Material & Labour for Non - skid Jointless Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

Material & Labour for Non - skid lointless Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

Material & Labour for Non - skid lointless Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

Material & Labour for wall tiles coloured of size 300x200x7mm thick , jointing in neat cement slurry and pointing in colour cement to match over and including 10mm thick plaster in cm 1:4 complete all as specified and directed.

Material & Labour for wall tiles coloured of size 350 x 250x 7 mm/ 450 x 350 x 7 mm thick set & jointing in neat cement slurry and pointing in colour cement to match over and including 10mm thick plaster in cm 1:4 complete all as specified and directed.

Material & Labour for exterior wall tiles coloured of size 350 x 250x 7 mm/ 450 x 350 x 7 mm thick set & jointing in neat cement slurry and pointing in colour cement to match over and including 10mm thick plaster in cm 1:4 complete all as specified and directed. Make : Johnson

Material & Labour for Machine cut kota stone slab flooring 20-25mm thick over or including 20mm thick cement screed bed in cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade including rubbing and mirror polishing complete

Material & Labour for Machine cut kota stone slab 20-25mm thick on vertical surface as in riser of steps, skirting, dado and pillar laid over and including 15mm thick cement rendering in cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade including rubbing and mirror polishing complete

Supply & fix in repairs Chromium Plated long body Bib taps, cast copper alloy with crutch or butterfly handle with wall flange with aerator, screwed down, screwed for iron pipe or for brass ferrule and fixed of 15mm bore complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and removal to store.

Taking up or down 20 mm bore steel tubing and removal to store

Supply & fix 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors. (Make - Jindal)/ TATA/Zanith

Supply & fix 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors. (Make - Jindal)/ TATA/Zanith

Supply & fix 500 litres capacity Rotational moulded polyethylene water storage tanks triple layered (Cylindrical vertical with closed top) hoisted and fixed in positioncomplete all as specified in SSR Part I including disconnectiong of existing tank and removing to store. (Make Sintex)

Supply & fix 1000 litres capacity Rotational moulded polyethylene water storage tanks triple layered (Cylindrical vertical with closed top) hoisted and fixed in position including complete all as specified in SSR Part I including disconnectiong of existing tank and removing to store. (Make Sintex )

Disconnecting the existing tank shifted to sided and refixing 1000 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) including cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc

All as per item No 77 above but 500 litres capacity

Supply & fix in repairs 15 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/20 mm - 210 gms/25mm-455gms/ 40mm - 690 gms) (Make: Prayag/Polytuff)

Supply & fix in repairs 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/20 mm - 210 gms/25mm-455gms/ 40mm - 690 gms) (Make: Prayag/Polytuff)

Supply & fix in repairs 25 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/20 mm - 210 gms/25mm-455gms/ 40mm - 690 gms) (Make: Prayag/Polytuff)

Supply & fix in repairs Bib tap fancy type of PTMT any colour high pressure screwed for15 mm bore iron pipe and fixed. (Minimum weight 15mm- 105gms).(Make: Prayag/Polytuff)

Supply & fix in repairs Bib tap fancy type with long body.of PTMT any colour high pressure screwed for iron pipe and fixed. Minimum weight 15mm-120gms) (Make: Prayag/Polytuff)

Supply & fix in repairs Pillar taps fancy type.of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-120gms (Make: Prayag/Polytuff)

Supply & fix in repairs 15mm Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm- 92gms) (Make: Prayag/Polytuff)

Supply & fix in repairs15mm Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) (Make: Prayag/Polytuff)

Supply & fix in repairs PVC connections 15mm size with PTMT nuts of length 600mm (Make: Prayag/Polytuff)

Supply & fix in repairs 15 mm bore Bib taps, chromium plated cast copper alloy fancy type , with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.

Supply & fix in repairs 15 mm bore Stop valves, cast copper alloy fancy type, chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.

Supply & fix in repair Chromium plated shower rose 65 mm size with swivel joints, any size, including fixing to steel pipe or union.

Supply & fix in repairs 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe in repair.

Supply & fix in repairs Vitreous China Urinal, Half stall type, white size with grating and union for discharge pipe including flushing cistern, flush pipe and waste pipe, cutting for and pinning ends of brackets or erecting stand..

Supply & fix in repairs Vitreous China Urinal, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe including flushing cistern, flush pipe and waste pipe, cutting for and pinning ends of brackets or erecting stand.

Supply & fix in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size including cutting for and pinning ends of brackets or erecting stand.

Supply & fix in repairs Vitreous China Squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rests.

Supply & fix 1 mm thick stainless steel sinks with drainage board for kitchen and laboratory with plugs , washer and waste including fixing contilever brackets and connecting union to pipes overall size 1165mmx505mm with bowl size 405mm x 405mm x 230mm fixed in repairs. Make Nirali 'Orus'

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings

Material & Labour for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Supply & fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Supply & fix Steel rolling shutters, of 1 mm thick laths, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: but gear operated type with bevel gear box and crank handle

Supply & fix in repair aluminium (Die Cast) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

Cutting grooves in brick wall, 75mm wide and 65mm deep inlcuding for inserting TMT bar as required length and shaping horizontal/vertical face of groove with cement mortar 1:3

Supply only 10 mm TMT bars for reinforcement, in available lengths as directed and specified.

Supply & Fix 25mm dia mild steel drapery rod powder coated having wall thickness 1mm with all fittings bulbs, finails, brackets as required fixed to walls with screw, gutties and curtain rings 20 cm centre to centre etc complete all as specified and as directed by Engineer -in-Charge.

Supply & fix in repair coloured Toilet paper holder of CP fixed to walls with chromium plated (CP) brass screws complete all as specified and directed.

Supply & fix in repair Vitreous china ware wash down water closet pan (pedstal pattern) , white excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

Supply & fix in repair Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device

Supply & fixed PVC flushing cistern low level of capacity of 10 ltr, white, valve less symphonic action type complete with inlet ball valve float and handle or Push button type including brackets and fixed in repair complete all as specified & directed.

Supply & fix PVC SWR floor S trap 100mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating all as specified.

Supply & fix PVC SWR pipes 110 mm dia single socketed in any length with rubber rings, joints laid in trenches or in floors including taking down existing pipe complete all as specified and directed.

Supply & fix PVC SWR pipes 75 mm dia single socketed in any length with rubber rings, joints laid in trenches or in floorsincluding taking down existing pipe complete all as specified and directed.

Supply & fix PVC (SWR) bends 75 mm bore of any radius complete all as specified and directed.

Supply & fix PVC (SWR) bends 110 mm bore of any radius complete all as specified and directed.

Supply & fix 75 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

Supply & fix 110 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

Supply & fix 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

Supply & fix 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

Supply & fix in repairs PTMT greating round 140mm size (minimum weight 50 gms) complete all as specified & directed.

Supply & fix in repairs 32 mm bore PVC waste cupling with PVC waste pipe for WHB complete all as specified and as directed.

Supply & fix in repairs 40 mm borePVC waste cupling with PVC waste pipe for Sink complete all as specified and as directed.

Supply & fix acrylic toilet cabinet with shelves 425mmx350mm 100 mm size , with shutter complete all as specified & directed

Supply & fix steel plate rack made of stainless steel 1mm thick over all size 600 mm x750mm complete all as specified & directed

Applying evenly a tack coat of hot blown industrial bitumen 85/25 at the rate of 1.2kg/sqm including cleaning surface complete all as specified.

Material and labour for PCC (1:7:12) type F-2 (using 40mm graded stone aggregate) as in filling of sunken floors, mass concrete etc complete all as specified and directed.

Supply only integral water proofing compound (ISI marked) complete all as specified and directed.

Material and labour for 15mm thick cement plaster on sunken portion of slabs in cement mortar (1:3) mixed with integral water proofing compound in the proportion recommended by manufacturer complete all as specified and directed. (WPC shall be measured and paid separately).

Supply and fix PVC hollow wall panelling consisting of PVC profile 250mm wide and 6mm thick reinforced with PVC linining 10mm C/c with interlocking arrangement fixed to wall with PVC rowl plugs and steel screws 40cm C/C vertically by drilling holes fixing to walls of reqd height fixed with PVC cassing and capping for top and corner portion of panneling fixed complete all as specified and as directed by Engineer-in-Charge.

s.v and co

J.K & Company

COSMO BUILDERS