COMPLETION OF INCOMPLETE WORKS OF MAGAZINE BUILDING AT NAD, SUNABEDA

Amount

Schedule "A" Part – I to Schedule "A" Part – XI: NOTE: Schedule "A" Part – I to Part – XI are prepriced by MES. Bidders shall insert their Lumpsum amount in Green coloured field under Column - 6 only

Lumpsum price worked out by the contractor for "Buildings & Structures", as listed in Schedule "A" Part – I .

Lumpsum price worked out by the contractor for "Demolition/ Dismantling", as listed in Schedule "A" Part – II .

Lumpsum price worked out by the contractor for "Site Clearance / Area Development / Earthwork Excavation", as listed in Schedule "A" Part – III .

Lumpsum price worked out by the contractor for "Road / Path / Culvert", as listed in Schedule "A" Part – IV .

Lumpsum price worked out by the contractor for "Area Drainage", as listed in Schedule "A" Part – V .

Lumpsum price worked out by the contractor for "Sewage Disposal", as listed in Schedule "A" Part – VI .

Lumpsum price worked out by the contractor for "Internal Water Supply", as listed in Schedule "A" Part – VII .

Lumpsum price worked out by the contractor for "Internal Electrification", as listed in Schedule "A" Part – VIII .

Lumpsum price worked out by the contractor for "External Water Supply", as listed in Schedule "A" Part – IX

Lumpsum price worked out by the contractor for "External Electrification, EOT Crane & Generator set", as listed in Schedule "A" Part – X

Lumpsum price worked out by the contractor for "Lightning Protection", as listed in Schedule "A" Part – XI

Schedule "A" Part - XII [Miscellaneous Items]

Point Wiring complete with 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable, confirming to IS - 694 drawn through and including heavy duty PVC Conduit, 20 mm dia including all accessories concealed in Walls / Roofs / Floors / Ceiling etc. and Pressed Metal Flush Box made out of 2mm thick MS Sheet of suitable size and 3 mm thick Hylam Sheet top cover for fixing switches, fittings, regulators etc concealed in walls, including 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable as earth continuity conductor with colour coding and connecting to Earth Dolly for One Light / Fan Point / Bell Point controlled by One Switch complete all as specified.

All as per Serial Item No. 12 above but One 3 Pin Switch Socket Outlet 5 Amps on Independent Board complete all as specified.

All as per Serial Item No. 12 above but one 3 Pin Switch Socket Outlet 16 Amps on independent board, with 1100 Volts, FRLS grade, 2.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable confirming to IS - 694 and including 1100 Volts, FRLS grade, 2.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable as Earth Continuity Conductor.

Point Wiring for Flame Proof Fixtures / Fittings complete with 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable, confirming to IS - 694 drawn through and including ERW Steel Conduit 20 mm dia, Medium Grade, ISI Marked including all accessories concealed in Walls / Roofs / Floors / Ceiling etc. including 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable as earth continuity conductor with colour coding and connecting to Earth Dolly for One Light / Fan Point / Bell Point controlled by One Flame Proof Rotary Type Switch complete all as specified.

Switch Flame Proof rotary type with Termination Box in LM6, upto 16A, Single Pole, 240V complete all as specefied and directed.

Flame Proof Well Glass LED High Bay Luminaire, 100 Watt with complete Fulham drive and all accessories, 240 Volts with IP65 protection complete as per Sudhir Catalogue No. WG1239 or its equivalent in Baliga and all as specified.

Flame Proof LED Bulk Head / Well Glass Luminaire, 40 Watt, 240 Volts with IP65 protection and Die Cast aluminum housing with heat resistant glass complete all as specified. Make: Crompton Greaves / Wipro/ Philips/ Bajaj/Osram

Energy efficient LED light fitting with tube 19/20 watt or minimum lumen output is not less than 1900 lumens, 230 V surface mounted LED batten type with extruded aluminium/CRCA housing and robust construction with necessary acrylic cover diffuser with mounting bracket etc including connecting up with twincore twisted flexible copper conductor cable with suitable size complete all as specified and directed. Make: BAJAJ / PHILIPS / CG / HAVELLS / WIPRO / SURYA

Energy efficient LED light fitting with tube 36 watt or minimum lumen output is not less than 3600 lumens, 230 V surface mounted LED batten type with extruded aluminium/CRCA housing and robust construction with necessary acrylic cover diffuser with mounting bracket etc including connecting up with twincore twisted flexible copper conductor cable with suitable size complete all as specified and directed. Make: BAJAJ / PHILIPS / CG / HAVELLS / WIPRO / SURYA

Energy saving ceiling mounted decorative LED Luminaire, 8 Watt, 230 Volts, Surface mounted with Opal diffuser for soft light including connecting up with three core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete all as specified and directed. Make: CG Cat No.LCDS-08-CDL or equivqlent in BAJAJ / PHILIPS / HAVELLS / WIPRO / SURYA

Energy efficient Sleek LED Mirror Light fitting with high output diffuser, 10 Watt, 230 Volts, 600mm long, surface mounted including connecting up with three core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete all as specified and directed. Make: BAJAJ / PHILIPS / CG / HAVELLS / WIPRO / SURYA

LED Security light fitting with tube 20 W new generation energy saving & environmental friendly long life versatile pressure die cast aluminium Luminaire with mid power LEDs as source and HF electronic driver pre wired with 1.5 Sq.mm copper conductor cable up to connector including 2m long GI tubing medium grade 32mm dia bend to required shape fixing on wall with suitable MS brackets complete all as specified and directed. Make: BAJAJ / PHILIPS / CG / HAVELLS / WIPRO / SURYA

Exhaust Fan, 200mm Sweep, 900 RPM, Metal Body, Heavy duty, 230 Volts, AC, 50 Hz, Domestic Type including louver shutter complete all as specified.

Ceiling Fan, 1200mm Sweep, 230 Volts AC, 50Hz including down rod and Canopy, 5 Star Rating and of colour milky white complete all as specified.(five star)

Sub main wiring with 2 runs of single core 6 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawing through and including heavy duty PVC Conduit, 25 mm dia with all accessories concealed in Walls / Roofs / Floors / Ceiling etc. including One run of 6 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade earth continuity conductor complete all as specified. [Note: 3 runs of 6 Sq.mm & one run of 25mm dia PVC Conduit will be measured as one unit]

Flame Proof MCB DB, SPN, 8 Way, 415 Volts with MCB, SPN, 40 Amps - 01 Nos [Incomer], MCB, SP, 40 Amps - 06 Nos [Out Going] with 200 Amps rated bus bar with IP 42 protection and Double Door, Vertical type complete all as specified. [Make: Sudhir / Baliga]

MCB TPN, 40 Amp, 415 Volts, 10 KA breaking capacity complete all as specified.

Earthing complete with Galvanised steel earth plate electrode 600 X 600 X 6 mm thick burried directly in ground [earth pit not less than 2.25 m deep below ground level] with top edge of plate not less than 1.50 m below normal ground level connected to 4 mm GI Wire [Earth Lead] and GI pipe 15 mm, Medium Grade for earthing lead protection to the extent of maximum 7.5m, Earth Plate Electrode surrounded by 150mm thick packed layers of Charcoal and Common Salt filled in alternate layers, connected to the plate by means of GI Bolts & Nuts complete all as per Electrical plate No. 3 of SSR Part - I, connected to panel / DB including testing on completion including main earthing, Charcoal, Common Salt, PCC [1:2:4, Type B1] Pit with RCC 1:2:4, Type B1 Cover, 50 mm thick with 6 Nos, 8 mm dia TMT bars in both ways, MS frame made with 40 X 40 X 6 mm Angle Iron, MS Funnel with 20 mm bore, medium grade GI Watering pipe, wire mesh, earth work excavation, return filling, removal of surplus soil etc. complete all as specified.

Earthing complete with Galvanised steel earth plate electrode 600 X 600 X 6 mm thick burried directly in ground [earth pit not less than 2.25 m deep below ground level] with top edge of plate not less than 1.50 m below normal ground level connected to 32 X 6mm GI Strip [Earth Lead] and GI pipe 50 mm, Medium Grade for earthing lead protection to the extent of maximum 7.5m, Earth Plate Electrode surrounded by 150mm thick packed layers of Charcoal and Common Salt filled in alternate layers, connected to the plate by means of GI Bolts & Nuts complete all as per Electrical plate No. 3 of SSR Part - I, connected to panel / DB including testing on completion including main earthing, Charcoal, Common Salt, PCC [1:2:4, Type B1] Pit with RCC 1:2:4, Type B1 Cover, 50 mm thick with 6 Nos, 8 mm dia TMT bars in both ways, MS frame made with 40 X 40 X 6 mm Angle Iron, MS Funnel with 20 mm bore, medium grade GI Watering pipe, wire mesh, earth work excavation, return filling, removal of surplus soil etc. complete all as specified and as directed.

Earthing complete with Copper earth plate electrode 600 X 600 X 3.15 mm thick burried directly in ground [earth pit not less than 2.25 m deep below ground level] with top edge of plate not less than 1.50 m below normal ground level connected to 20 X 3mm Copper Earth Strip [Earth Lead] and GI pipe 32 mm, Medium Grade for earthing lead protection to the extent of maximum 7.5m, Earth Plate Electrode surrounded by 150mm thick packed layers of Charcoal and Common Salt filled in alternate layers, connected to the plate by means of GI Bolts & Nuts complete all as per Electrical plate No. 3 of SSR Part - I, connected to panel / DB including testing on completion including main earthing, Charcoal, Common Salt, PCC [1:2:4, Type B1] Pit with RCC 1:2:4, Type B1 Cover, 50 mm thick with 6 Nos, 8 mm dia TMT bars in both ways, MS frame made with 40 X 40 X 6 mm Angle Iron, MS Funnel with 20 mm bore, medium grade GI Watering pipe, wire mesh, earthwork excavation, return filling, removal of surplus soil etc. complete all as specified and as directed.

100 mm bore Ductile Iron Pressure Pipes, Centrifugally Cast [Spun], Class "K-7" with Socket and Spigot ends conforming to IS - 8329 in standard lengths suitable for Push-On Rubber Gasket Jointing with inside Cement Mortar Lining and Black Bitumen external coating complete all as specified and as directed.

Cast iron Air valve of size 100mm dia with two air outlet conforming to IS 14845 complete all as specified and directed.

Supply, fabricate, errect, install and commissioning of 2 Pole structure with steel swaged pole 11m long complete with cast iron base plate,finial taper plug, bolts, nuts and screws as specified, Type410, SP-55 including excavation and earth work, PCC 1:4:8 Type-D2 foundation,PCC 1:3:6 Type-C1 coping and bedding, Cross arms,angle supports, Clamps, anti climbing device, danger notice board etc complete all as specified and directed.

XLPE insulated and PVC sheathed, FRLS armoured heavy duty underground cable, ISI marked with aluminium stranded conductor 1100 Volt grade of size 3½ Core,630 Sq.mm cross section suitable for earthed system, laying in trenches / duct / fixed to poles / drawn through pipes / sleeving through pipe in duct, including suitable size Double compression copper stainless steel cable gland, crimping type cable lugs, sockets etc complete.

XLPE insulated and PVC sheathed, FRLS armoured heavy duty underground cable, ISI marked with aluminium stranded conductor 1100 Volt grade of size 3½ Core, 400 Sq.mm cross section suitable for earthed system, laying in trenches / duct / fixed to poles / drawn through pipes / sleeving through pipe in duct, including suitable size Double compression copper stainless steel cable gland, crimping type cable lugs, sockets etc complete.

XLPE insulated and PVC sheathed, FRLS armoured heavy duty underground cable, ISI marked with aluminium stranded conductor 1100 Volt grade of size 3½ Core, 300 Sq.mm cross section suitable for earthed system, laying in trenches / duct / fixed to poles / drawn through pipes / sleeving through pipe in duct, including suitable size Double compression copper stainless steel cable gland, crimping type cable lugs, sockets etc complete.

XLPE insulated and PVC sheathed, FRLS armoured heavy duty underground cable, ISI marked with aluminium stranded conductor 1100 Volt grade of size 3½ Core,240 Sq.mm cross section suitable for earthed system, laying in trenches / duct / fixed to poles / drawn through pipes / sleeving through pipe in duct, including suitable size Double compression copper stainless steel cable gland, crimping type cable lugs, sockets etc complete.

XLPE insulated and PVC sheathed, FRLS armoured heavy duty underground cable, ISI marked with aluminium stranded conductor 1100 Volt grade of size 3½ Core, 120 Sq.mm cross section suitable for earthed system, laying in trenches / duct / fixed to poles / drawn through pipes / sleeving through pipe in duct, including suitable size Double compression copper stainless steel cable gland, crimping type cable lugs, sockets etc complete.

XLPE insulated and PVC sheathed, FRLS armoured heavy duty underground cable, ISI marked with aluminium stranded conductor 1100 Volt grade of size 4 Core, 16 Sq.mm cross section suitable for earthed system, laying in trenches / duct / fixed to poles / drawn through pipes / sleeving through pipe in duct, including suitable size Double compression copper stainless steel cable gland, crimping type cable lugs, sockets etc complete.

Cable path indicator, Disc of size 200mm dia ,10mm thick and mounted letters with HT cables including indicating direction fixed to 25X25X6mm MS angle iron support of 500mm long embeded up to 200mm in PCC 1:3:6 type C1 of size 300X200X300mm, Including two coats of aluminium paint over a coat of primer including necessary earth work and excavation in any type of soil complete all as specified and directed.

Cable jointing kit for 1100 V grade cable for straight through joint complete with jointing material (Epoxy based) and accessories suitable for 3.5 core XLPE armoured Aluminium conductor cable of size 630 Sqmm complete all as specified and directed.

New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP66 Street Light Luminaire with high power LEDs as light source and electronic driver of 70/72W LED, including GI Bracket made out of 32 mm bore GI Tube, Medium Grade of size not exceeding 2.00 m in length and bent to shape required and fixed with 2 Nos of Pole fitting Clamps made out of MS Flat of size 50 X 6mm, bolts, nuts, washers and painting with two coats of aluminium paint over a coat of primer red oxide zinc chrome primer and connecting up with three core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm complete as per Crompton Greaves or its equivalent in Wipro or Philips or Bajaj or Osram all as specified.

Steel tubular swaged poles 9 metres long complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 including preparation of steel surfaces and applying two coats of Aluminium paint over a coat of or zinc chrome primer complete all as specified and directed.

Supply only Transformer, Step Down, Indoor Type, Floor or Platform Mounted complete with standard fittings, 11 KV / 433 V [at No load], AC, 3 Phase, 50 Hz, of 500 KVA capacity, Double Copper Wound, Oil immersed, CRGO Core type Naturally cooled, Built-up with class "A" insulation, having Primary Voltage [HT] 11 KV and Secondary Voltage [LT] of 433 Volts, Delta connected on 11 KV Side & Star connected on 433 Volts side, designed & constructed with particular reference to Tropical Condition, conforming to IS – 1180 with latest amendment confirming to energy efficient level-2 complete all as specified and as directed and comprising of the following Specification and Fittings: Continuous Rating : 500 KVA No- Load Voltage Ratio : 11 KV / 433 V Tapping on HV [%] : ± 7.5, ± 5,± 2.5 Phase & Frequency : 3 Phase & 50 Hz Connection : Delta Star Vector Group : DYN 11 Cooling : ONAN Type : Indoor

Terminal Arrangement: [a] HV Side: Cable Box [b] Quad furcating cable box with five compression glands for PVC Cable and One additional neutral terminal shall be brought out separately for earthing purpose on LV Side. [c] First filling of new and unused Transformer Oil [IS – 335 Marked], filtered and tested up to 50KV dielectric strength at 2.5mm air gap between testing electrodes. Certification of dielectric strength shall be submitted by the Contractor after filling the oil. [d] Apart from routine tests mentioned in these tender documents and relevant IS, pre-commissioning inspection of Transformer shall be carried out by Senior Electrical Inspector / Electrical Inspector.

Fittings: [a] Externally hand operated Off–Circuit Tap Switch with position indicator and locking device. [b] Conservator with Oil Gauge, filling hole with plug & drain hole with plug [c] Undercarriage with four plain rollers [d] Oil filling hole cum air release plug [e] Drain Valve cum Sampling Valve [f] Top Filter Valve with Plug [g] Rating Plate with Diagram Plate [h] Lifting lugs for Transformer [j] Lifting lugs for Core [k] Earthing Terminals [l] Thermometer Pockets [m] Silica Breather [n] Explosion Vent [o] Double Float Buchholz with alarm and trip contacts including control cable of copper conductor of size & length from Marshalling Box to Relay of VCB [p] 150mm size Oil Temperature indicator, dial type with alarm and trip contacts [q] 150mm size Winding Temperature indicator, dial type with alarm and trip contacts [r] Buchholz Relay with 2 Shut-Off Valves [s] Marshalling Box with Double Window [t] OCTC

Install, Connecting, Commissioning and Testing of Transformer, Step Down, Indoor Type, Floor or Platform Mounted complete with standard fittings, 11 KV / 433 V [at No load], AC, 3 Phase, 50 Hz, of 500 KVA capacity

CPRI approved, Factory made, dust and vermin proof LT control panel , cubical out door type,double door,fabricated with 3.15mm thick CRCA Sheet with angle iron frame made of 50x50x6mm and shall be painted with epoxy powder paint by means of electro static gun after rigorous pre–treatment comprising of cold phosphating process on all internal and external surfaces after due preparation of surfaces, suitable for voltage 415 volts,3phase,4 wire with separate hinge door for each compartment with locking arrangement with back door common openable(screwed),grouted in PCC 1:2:4 complete inluding 800A Copper bus bar (TPN) suitable double compression copper cable glands-4nos and including comprising the following:

CPRI approved, Factory made, dust and vermin proof LT control panel , cubical out door type,double door,fabricated with 3.15mm thick CRCA Sheet with angle iron frame made of 50x50x6mm and shall be painted with epoxy powder paint by means of electro static gun after rigorous pre–treatment comprising of cold phosphating process on all internal and external surfaces after due preparation of surfaces, suitable for voltage 415 volts,3phase,4 wire with separate hinge door for each compartment with locking arrangement with back door common openable(screwed),grouted in PCC 1:2:4 complete inluding 1000A Copper bus bar (TPN) suitable double compression copper cable glands-4nos and including comprising the following:

11KV HT,3Phase,50 cycle out door type totally enclosed metal clad switch gear complete with VCB having rupturing capacity of 250 MVA, over load and earth fault protection, ammetor,volt meter and operating upto 400 amps complete all as specified and as directed. The Bus Bar rating shall be 400A for complete switchgear along with all accessories as specified hereunder: Make: Schneider [Areva] / ABB / Siemens / BHEL

On site LLDPE septic tank designed to carry sewage and sullage water including excavation and earth work in any type of soil,PCC 1:4:8 as in foundation,vent shaft,connections etc complete for 10 users with upflow filter including media complete all as specified and directed.

RCC septic tank designed to carry sewage and sullage water including excavation and earth work in any type of soil, PCC 1:4:8 as in foundation, RCC M-30 design mix in walls, base slab, buffle walls, Roof slab including beams etc with vent shaft, Manhole Openings with cover, connections etc complete for 50 users with upflow filter including media complete all as specified and directed.

Soakage well of size 1.2 m dia and 3.0 m deep including excavation and earth work in any type of soil, PCC 1:3:6 as in foundation, Walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonry in cement mortar. RCC M25 Cover slab, SFRC cover interconnecting RCC pipes complete filled with brick bats all as specified and directed.

Soakage well of size 2.4 m dia and 3.0 m deep including excavation and earth work in any type of soil, PCC 1:3:6 as in foundation, Walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonry in cement mortar. RCC M25 Cover slab, SFRC cover interconnecting RCC pipes complete filled with brick bats all as specified and directed.

Supply Install Test and commissioning of Silent Diesel Engine driven Generating Set of Capacity 500 KVA, as per latest CPCB norms 415 Volts, Three phase,4 wire ,engine as per IS – 10001 / 10002 and alternator as per IS – 13364 complete with relay panel for automatic starting on main failure, control panel having meters, sound proof canopy as per relevant IS and foundation etc including following: A. ENGINE: Direct injection, Water cooled engine, 6 cylinder, in-line, 4 stroke, rated at 1500 RPM, conforming to BS – 5514 has the following specification: [i] In- line fuel pump with electronic governor for 500 KVA. [ii] Turbocharger [iii] Stainless steel exhaust flexible coupling and exhaust pipe duly insulated with glass fire wool and Plain GI sheet cladding & extended outside the building. [iv] Silencer [v] Radiator [vi] coolant inhibitor [vii] Plate Type Lub Oil Cooler [viii] Spin-On-Filters-Coolant, Fuel, Fuel & Lub Oil [viii] Dry type, heavy duty, replaceable paper element air cleaner with restriction indicator [ix] Flywheel housing and flywheel to suit single bearing alternator [xii] Electrical starter motor [x] Battery charging alternator [xi] 2x12 Volts batteries 180 AH capacity with multistranded copper cable for connecting leads and terminals [xii] First fill lub oil.

B. ALTERNATOR [i] Self Excited, Self Regulated [ii] Voltage regulation [+] or [-] 1 % [iii] Class H insulation [iv] Salient pole revolving field [v] Digital automatic voltage regulator [Part of PCC 1301] [vi] Standard Enclosure IP-23 [vii] Telephone Interference Factor: 50 [viii] Total Harmonic Factor: Better than 2% [ix] Supplying power to variable electrical load for unlimited hours. Prime power [PRP] is in accordance with ISO 8528.Ten percent over load capacity for one hour every 12 Hours of operation and will be suitable for tropical condition.

C. ENGINE CONTROL WITH AMF PANEL: Standard control panel along with DG set cubicle with CRCA sheet, angle iron structure including by providing following accessories: [i] ACB, FP, 1200 Amps - 1 No. [ii] Contactor 4 pole, 1200 Amps capacity - 2 Nos [ii] Contactor 4 pole 630 Amps capacity - 1 Nos for Neutral [iii] Microprocessor based LED/LCD multifunctional intelligent panel meter for showing current, voltage, frequency, power factor, energy consumed, speed, temperature of engine, oil level, battery voltage etc. [iv] Digital frequency meter-1 No [v] Digital Power factor meter with CTs - 1 No [vi] Three phase CT operated Digital KWH Meter 1000 Amps - 1No [vii] Indicating lamps for "DG ON & LOAD ON" [viii] Instrument displaying Water Temperature, Lube Oil Pressure, Engine RPM, Battery Charging. [ix] PVC Sleeve insulated Tinned Copper bus Bar suitable for 1200 Amps current carrying capacity [TPN ] [x] Instrumentation control switch fuses./ MCB,s duly wired and ferruled. [xi] Coolant heater with thermostatic switch [xii] Lub oil heater

D. FUEL TANK: [i] Fuel tank suitable capacity for minimum 12 Hours run with provision for supply and return lines, level indicator, drain valve, cleaning cover Vent pipe & locking device. [ii] MS Fuel pipeline from fuel tank to FIP of suitable size. [iii] The fuel tank has to be mounted / located outside the cubicle with suitable mounting with iron angle support. E . ACOUSTIC ENCLOSURE: [i] Designed to meet stringent MOEF / CPCB norms 75 dBA @ 1 m At 75% load under free field conditions. [ii] Air inlet louvers to be designed to operate at rated load even at 50°C air inlet temp. [iii] Cubicle to be powder coated for long lasting service life and super finish with UV resistant powder coating , it has to with stand extreme environment. Has to be use Stain steel hardware. [iv] Insulation material has to meets exacting IS 8183 specs for better sound attenuation [v] Provision of Genset controller for Engine & Alternator. F. ACCESSORIES: [i] Periodical maintenance tools as per manufacture [ii] Operational , spare parts, & installation guide line catalogue.

NOTE: [i] Provision of PCC foundation as per manufacture instruction with anti vibration mounting pads as per manufacturers guidelines. [ii] Testing of DG set to be carried out by reP of Accepting officer/IEM. [iii] Artificial load i.e. strip heaters of suitable capacity to be made available during test. [iv] Extended terminals with tinned copper has to be provided for terminating the incoming & out going cable with suitable lugs for MCCB’s if required. [v] U/G cable to be laid/connected DG set cubicle panel to AMF control panel [change over panel] all as specified. [vi] The rate quoted by contractor deemed to include for provision of cable gland & Aluminium lugs for suitable size for terminating the cable at both ends.

Supply, Install, Test and Commissioning of Flame Proof Electrically Operated Over Head Travelling [EOT] Crane of 03 Ton Capacity complete of 18.00 metres span [approximate] with long travel distance of 29.00 metres with clear hook height of 5.60 metres from floor level, double box girder type with necessary steel supporting structure electric motor with micro motion controls with VVVF drive and shall be operated by means of push button pendent unit from the floor and control panel and operated with pendent control movable independent of crab position including provision of steel gantry rails for long travel for complete length and provision of Down Shop Lead [DSL] festoon type etc all as per IS 3177 & 807 with following specification complete all as specified. [i] Hoist speed : 2.0 M/Min [ii] Cross Travel speed : 5.0 M/Min [iii] Long Travel speed : 10.0 M/Min [iv] Creep speed for hoist : .2 M/Min [v] Creep speed for cross travel : 0.5M/Min [vi] Creep speed for long travel : 1.0 M/Min Make: Tyojam / Anupam / Mukund / Jessop / WMI / Dinesh Enterprises.

Timelite distribution board 32 A, 3Pole,230 Volt with astronomical time switch completely pre wired complete all as directed.

Time Switches 250 V, single phase 20 Amp rating with contactor fitted inside steel enclosure complete all as directed.

Rectification B/R

M&L for cleaning of exposed rebars from existing rcc works like columns, walls, etc., using a wire brush or pressure washer to remove rust or other contaminants including removal of any loose or damaged concrete using a chisel or jackhammer and coating the rebar with Sika® FerroGard®-950 IN complete all as specified and directed.

M&L for Preparation of plastered/unplastered concrete/masonry surface by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying a coat of cement wash complete all as specified and as directed.

M&L for Removal of formwork from existing RCC work likes sides of columns, beams and soffits of floor slab, beams complete all as specified and directed.

Testing/ Commissioning

Testing and commisioning only of cable termination [3.5 Core 630 Sqmm] including Supply and fix suitable size of gland and connected in LT adopter outdoor type panel and Substation panel (Tapping Point ) complete with necessary end termination, lugs, bolts & nuts etc complete all as specified and directed etc, properly arranging the released loop of cable and testing/commissioning the cables with necessary T&P etc. complete all as specified and directed.

Testing and commisioning only CPRI approved, Factory made,adapter panel , cubical out door type,double door,fabricated with 3.5 mm thick CRCA Sheet with angle iron frame made of 50x50x6mm and shall be painted with epoxy powder paint by means of electro static gun after rigorous pre–treatment comprising of cold phosphating process on all internal and external surfaces after due preparation of surfaces, suitable for voltage 415 volts,3phase,4 wire with separate hinge door for each compartment with locking arrangement with back door common openable(screwed),grouted in PCC 1:2:4 complete inluding 600A Copper bus bar (TPN) suitable double compression copper cable glands-4nos and incoming of 630 sqmm cable and one out going for 3.5 core, 630 sqmm complete all as directed.

R K BUILDER (BID ID -3135312)

D R STEEL CONSTRUCTION COMPANY PRIVATE LIMITED (BID ID -3129614)

Jeet Construction (BID ID -3135120)

NARSINGH DEVELOPERS LLP (BID ID -3130276)

RAGHUSONS INFRA ENGINEERING PVT. LTD (BID ID -3135158)

SHRI GURMUKHDAS CONTRACTORS PVT. LTD. (BID ID -3135258)

SOOD ASSOCIATES PVT LTD (BID ID -3135392)