GE (W)/HSR-14/2024-25 REPAIR TO FLOOR PLASTER OF BLDGS OF MD JCOs OR OF ZONE B AT HISAR MIL STN UNDER GE (W) HISAR

Amount

M&L for Making good in Cement Mortar (1:4) under cills or over arches, lintels and bressummers .including all pinning when necessary complete all as specified and directed.

Renewing Glazed tiles in patches, area n .exc 5 sq.m. including removing and cleaning old tiles, preparing beds with 15mm thick Cement Mortar (1:6) and laying or setting, jointing neat cement slurry and pointing with colour/white cement to matching clour of new or old tiles complete all as specified and directed.

S&F Factory made Steel windows (Box type), with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded including one shop coat of Zinc chrome primer including making good disturbed surfaces of walls in repair complete all as specified and directed including taking down of existing old window. Note:- (i) The rate quoted by the contractor are deemed to be included for one shop coat of red oxide zinc chrome primer on steel windows. Nothing shall extra paid on this account. (ii) Detail of box window shall be given on drawing no TD/2013/01 Sheet 1/3,2/3,3/3 (iii) Glass pane/ wire gauze shall be measured and paid separately.

Factory made Steel windows (Box type), with side hung shutters including projecting type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded including one shop coat of Zinc chrome primer including making good disturbed surfaces of walls in repair complete all as specified and directed including taking down of existing old Shutters complete all as specified and directed. Note:- (i) The rate quoted by the contractor are deemed to be included for one shop coat of red oxide zinc chrome primer on steel windows. Nothing shall extra paid on this account. (ii) Detail of box window shall be given on drawing no TD/2013/01 Sheet 1/3,2/3,3/3 (iii) Glass pane/ wire gauze shall be measured and paid separately.

S & F Chimney bars (straight or camber); earing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165 complete all as specified and directed.

S & F GI wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed in steel windows and wooden shutters complete all as specified and directed.

S & F in repair GI wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed in steel windows and wooden shutters including necessay arrangements like welding etc complete all as specified and directed.

Hacking out old broken glass exc 1.5 sqm (any thicknes, size and description) from wooden / metal frames glazed with putty or fixed with beads complete on any storey of the bldg complete all as specified and directed.

S&F 3 mm thick sheet glass, ordinary quality & glazing with oil putty in square n.exc 0.5 sqm each pane complete all as specified and directed.

M&L preparation of new steel surface of any description over 10 cm width or grith and applying two coat of synthetic enamal paint complete all as specified and directed.

Taking down chowkhats or frame exc 1.50 Sqm but n exc 4 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

S & F for pressed steel frames of size 125 X 60 mm with one or more rebates including necessary fixing lugs, butt hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:6 including filling Hollow of frame with PCC 1:3:6 type C-1 complete as specified and directed.

S & F for pressed steel frames of size 100 X 60 mm with one or more rebates including necessary fixing lugs, butt hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:6 including filling Hollow of frame with PCC 1:3:6 type C-1 complete as specified and directed.

S&F flush shutter 35 mm thick, solid core construction, with block board core and both face covered with decorative face veneer with lipping/frame to match plywood face panels complete all as specified and directed.

S&F 2nd class Hard Wood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR PartI, Section 8, clause 8.24 (a) complete all as specified and directed.

M & L for preparations of new or previously untreated wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer to wooden surfaces complete all as specified and directed.

S&F aluminium, anodised, barrel tower bolt of extruded section and fixed, 200 mm size complete all as specified and directed.

S&F extruded aluminium alloy handles fabricated types, anodised, size 150 mm complete all as specified and directed.

S&F extruded aluminium alloy ,anodised ,sliding door bolt 250 mm in length with hasp, staple (bolt type) and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm & nexc 2 Sqm each resecuring, easing and adjusting and refixing in the same opening complete all as specified and directed.

M & L, viritfied ceramic tiles 10mm thick light shade (square or rectangular) area of each tile not .exceeding 0.36 sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade, over and including 15mm thick cement sand screed bed in CM 1:6 including dismantling complete all as specified and directed.

M&L for coloured non-skid tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thick screed bed in cement mortar 1:6 including dismantling complete all as specified and directed.

M&L for Vitrified ceramic tiles (light shade) 10mm thick (square /rectangular) polished, area of each tiles not exceeding 0.36 sqm. in skirting etc set and jointed in neat cement slurry ad pointed in white or coloured cement to the match over and including 15mm thick backing coat in cement mortar 1:6 including dismantling complete all as specified and directed.

S&F non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm in floors, over and including 15mm thick screed in CM (1:4) set and jointed in neat cement slurry and pointed with white or coloured cement to match including dismantling complete all as specified and directed.

M&L for coloured glazed ceramic tiles of size 300x450x7mm / 250x350x7mm thick as in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:3 including dismantling complete all as specified and directed.

M&L for 20 to 25mm thick machine cut Kota stone ( single piece of required size for steps) flooring over cement screed base laid and jointed with grey cement slurrry mixed with pigments to match the shade of the slab including rubbing and Mirror polishing over and including 15mm thick screed bed in CM 1:4 including dismantling complete all as specified and directed. Note:- Kota stone in stair case should be provided in single piece upto 1.5 m length or aper site requirements.

Description all as per item No. 26.00 above but kota stone slab (100/150mm x 550mm) and 20-25mm thick in riser of steps, skirting , dados and pillar laid over and including 10mm thick rendering to receive the stone in cement mortar 1:3 and jointed including dismantling complete all as specified and directed. Note:- Kota stone in stair case should be provided in single peice upto 1.5 m length

M&L, 20mm thick granite stone slabs over and including 15 mm thick screed layer in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of stone incl rubbing & polishing including dismantling complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.

M&L for chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick,chemical treated, heavy duty PU Mould, set, jointed and pointed in neat cement slurry with grey cement and with pigments laid in floor in any patteren complete all as specified over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M & L for 50mm thick cement concrete type C – 1 (1:3:6) using 20mm graded stone aggregate as in plinth protection and PCC paved area, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M & L for 50mm thick cement concrete type C – 1 (1:3:6) using 20mm graded stone aggregate as in sub base of flooring complete all as specified and directed.

M&L, 15mm thick rendering in CM 1:6 to brick/concrete wall surfaces trowelled to even & smooth with out using extra cement including taking down complete all as specified and directed.

Description all as per item No. 33.00 as above but in CM 1:4 including taking down complete all as specified and directed.

Description all as per item No. 33.00 above but 10mm thick in CM 1:3 with WPC as in ceiling including taking down complete all as specified and directed.

Removing all disintegrated and loose concrete of any thickness including plaster if any in RCC Column, Chajja, slab, beams, lintels etc, removing all loose rust/scale form exposed reinforcement bars by using wire brushes and sand paper including cleaning of exposed surfaces of reinforcement with protective anti corrosive epoxy bonding chemical (make : Pidilite) and tied reinforcement bars/ IRC fabric 50mm X 50mm X 12gauge if reqd to reinforcement concrete bonding primer uniformly to exposed surfaces and applying cement mortar 1:3:1 with MPC (1 Part cement : 3 Part Sand : 1 Part 6mm coarse aggregate) to an average thickness not less than 20 mm and removing debris outside MD land all as specified and as directed (IRC 50x50x12 gauge or reinforcement bars shall be measured and paid separately)” at any height complete all as specified and directed. Note : IRC shall be measured and paid seperately.

Supply only IRC 50mm X 50 mm X 12 gauge weld mesh complete all as specified and directed.

Supply only reinforcement steel 6 to 8 mm dia including bending, binding with 0.9 mm dia MS annealed wire complete all as specified and directed.

M & L two coat of oil bound distemper on new plastered surfaces of walls including preparation of surfaces complete all as specified and directed.

M & L one coat of oil bound distemper over a coat of primer on old plastered surfaces of walls including preparation of surfaces complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over old surfaces including complete removal of existing treatment complete all as specified and directed.

M&L for preparation new plastered surfaces of ceiling and applying two coat of white washcomplete all as specified and directed.

M&L for preparation old plastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed.

M&L for Brickwork with flyash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) including Demolition of brickwork or stone/boulder masonry complete all as specified and directed.

Demolition of RCC in floors (other than ground floors), beams staircases, landing, chajjas, slab and similar suspended work, including removing out of MD Land complete all as specified and directed. Note : Demolition work is to be carried out in portion of building hence necessary scaffolding and safety measurs required to support adjucent portions of bldg are deemed to be included in quoted rates.

M&L RCC M-25 as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire 0.9 mm dia.

Description all as per item No. 48.00 above but 6 to 8mm dia complete all as specified and directed.

M&L form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick finish with rough finish flat surface complete all as specified and directed.

Fixing only in repair, PVC Low Level cistern 10 lir capacity, valveless, syphonic action type with float, handle incl 32mm dia flush pipe of polyethylene of low or high density or PVC & bracket etc complete all as specified and directed.

Fixing only in repair, WHB/sink including 32mm dia CP waste couplng with 32mm dia flush pipe of polyethylene of low or high density or PVC & bracket etc complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of 450 mm long in repair complete all as specified and directed.

S&F Grating round 140 mm size of PTMT with hole or without hole fixed in repair complete all as specified and directed.

Fixing only in repair old use able 15mm bore bib tap, stop valve, gate valve, pillar tap etc necessary repair work shall be carry out to old fitting before fixing fitting /fixture complete all as specified and directed.

Supply only water proofing compound complete all as specified and directed.

Balaji Construction Co.

Shiva Constructin Co.

M/s Jai Hanuman Construction

m/s krishna engineers1

VIKAS INFRASTRUCTURE

M/S Poonia Brothers Construction Company

virendra constructions