Special repair to JCOs Md Accn Bldg No NP-11 at Suranussi under GE Kapurthala.

Amount

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

Demolition of cement concrete in ground floor and paving n. exc. 15cm thickness (below or above ground level) complete all as specified and directed.

Taking down cement plaster/ terrazzo cast in situ of any description thickness including racking out joints hacking for key, scrubbing down with water etc. and removing rubbish complete all as specified and directed.

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area n exc. 1.5 Sqm each for doors and windows complete all as specified and directed.

All as per srl item No. 4 above but area exc 1.5 sqm but not exc 4 sqm complete all as specified and directed.

Taking down shutters only of any description area not exc 1 Sqm each complete all as specified and directed.

Taking down shutters only of any description area exc 1 Sqm but n. exc 2 sqm each complete all as specified and directed.

All as per srl item No. 7 above but refixing in same opening.

Material & labour for brick work with sub class 'B' bricks, old size, straight or curved on plan exc 6 metre built in cement mortar (1:6) complete all as specified and directed.

Material & labour for 15mm thick cement plaster in cement mortar (1:6) on fair faces of brick or concrete surfaces finished even & smooth without using extra cement complete all as specified.

Material & labour for 15mm thick cement plaster in cement mortar (1:4) on fair faces of brick or concrete surfaces with using water proofing compound as per manufacturer's instructions finished even & smooth without using extra cement complete all as specified. Note: WPC shall be measured and paid separately.

Material & labour for 5mm thick cement plaster in cement mortar (1:3) as on ceiling, soffits of RCC shelves, surfaces finished even and smooth without using extra cement complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing conforming to Gde Fe-290 (E-165) complete all as specified and directed

Material & labour for 35mm thick factory made plain framed, panelled shutters (two panels), with lock rail and panels of 9mm thick BWP commercial ply or of venered particle board 12mm thick with commercial veneering on both faces with rails and style of 2nd class hard wood. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Material & labour 2nd class hard wood factory made glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in clause 8.24 (a) of SSR Part-I; supplied and fitted to chowkhats complete all as specified and directed.

Supply & fix PVC solid door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, complete all as specified and directed as per manufacturer's instructions.

Supply & fix factory made PVC door shutter solid panel 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement,fixing in the frame at the site as per specification & as per manufacturer's instruction. complete all as per specified and as directed by the Engineer in Charge.

Supply & fixing for steel windows1.25mm thick box type primer (coated) ERW hollow 'P' section of size 60mmx25mm single rebated comprises of glazed skeleton shutter ERW section 50mmx20mm & 1mm thick and openable leaf consisting two nos sash bar of T section 20mmx3mm complete welded to frame including cutting holes and making good dismantled portion in cement concrete (1:2:4) type B1 four Nos for each window including following fitting welded to shutter complete all as specified and directed by Engr-in-charge :- (i) Hold fast 150mm long 12mmx3mm made to shape -04 Nos each window (ii) Handle of Z section 20x25mm, 100 mm long- 01 No each leaf (iii) MS tower bolt 150mm long - 02 Nos each leaf (iv) Z section 20x25mm, 100 mm stopper - 01 Nos per leaf (v) Cleat 55 mm long of hollow square 15x20x63 mm welded to hinges - 01 Nos per leaf (vi) MS Box type hinges of size 75x12mm - 02 Nos per leaf (vii) Fabrication and fixing arrangement all as per drawing No. CEJZ/TD/1019 sh 1/3 to 3/3 & CEJZ/TD-1020 sh 1/3 to 3/3. Note: Glass grill & painting shall be measured and paid separately.

All as per srl item No. 18 here in before but of gauged shutter. Note for item No. 18 & 19 :- Drg No. CEJZ/TD-1019 & 1020 are not being uploaded and the same can be seen in office of CWEJRC on any working day. Wire gauge, grill & painting shall be measured and paid for separately

All as per srl item No. 18 here in before but top hung ventilator shutters.

S&F for framed work such as grills, gratings, guard bar etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

Supply & fix mild steel sliding door bolts 300mm long stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

Supply & fix MS barrel tower bolt 200mm size stove enameled black with bright bolt and fixed complete all as specified and directed.

Supply & fix MS pressed handles, oval type, stove enameled black 150 mm size complete all as specified and directed.

Supply & fix 200 mm size aluminium anodised, barrel tower bolts of extruded section and fixed all as specified and directed

Supply & fix 100 mm size mild steel butt hinges medium weight, complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor of size 140mm complete all as specified and directed.

S&F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as spcified and directed.

S&F in repair block board grade-I quality exterior grade 19 mm thick commercial type, on both faces etc fixed to timber frame with screws work complete all as spcified and directed.

S&F in repair prelaminated decorative block board 25mm thick prelaminated on both faces etc fixed to timber frame work complete all as spcified and directed.

Supply and fix galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

All as per item No. 31 above but fixed in repair complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazed pins/springs clips and providing and fixing new ones. complete all as specified and directed.

Supply and fix 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

Supply and fix 4 mm thick figured glass pin headed type and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

Dismantling floor, hearth or wall tiling/ china mosaic including cement mortar bedding (but not backing), removing servicable tiles to store and rubbish off the premises complete all as specified and directed.

Material & labour for coloured ceramic non skid tiles 7 to 8mm thick, as approved, polished of size not less than 400mmx400mm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including screed bed 15mm thick in cement mortar (1:6) complete all as specified and directed.

Material & labour for glazed ceramic coloured tiles of size not less than 300 x 200 x 7mm thick as in vertical surfaces i.e. skirting/ dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface laid over and including 10mm thick rendering in cement mortar (1:4) complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of alkali resistant primer on wall complete all as specified.

Supply & fix in repairs vitreous china squatting pan WC Orissa pattern size 580mm x 440mm white with integral foot rest (excluding flushing cistern) with P or S trap including provision of lime concrete bedding including breaking up existing damaged WC seat and connecting flush pipe etc making good to match with existing surfaces complete all as specified and directed.

Supply and fixing in repair only PVC valve less white low level flushing cistern 10 ltr capacity with all fittings syphonic action with top push type button with inlet ball valve and float including flush pipe, ball valve, handle, bracket PVC short bend etc. complete all as specified and directed.

Supply & fix in repairs vitreous China wash hand basin white flat back, size 550mm x 400mm, cutting for and pinning in ends of brackets Including 32mm bore PVC waste pipe, brass coupling, brackets, CP pillar tap 15mm bore restoring all connections complete all as specified.

S & F in repair pillar tap 15mm dia cast copper alloy with capstan head chromium plated screwed down high pressure with or without letter hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified.

S & F in repair of PVC waste pipe 32mm dia including waste coupling complete all as specified.

S&F in replacement 20 mm dia harrison rails, mild steel with fixing brackets, stops , rollers etc complete all as specified and directed (two brackets per 1.5 m length and 08 Nos roller per 1RM)

Dismantling of brick tiles or terracing tile single layer as in roof covering complete all as specified & directed.

Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specially provided complete all as specified and directed.

M & L for PCC 1:5:10 type E2 using 40mm graded aggregate as in filling for sunken floors and similar works complete all as specified.

Supply only integral water proofing compound conforming to IS-2645 complete all as specified and directed.

Material & labour for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces over bitumen primer @ 0.3kg/sqm complete all as specified and directed.

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed.

M&L for 50mm thick average consolidated thickness cement concrete type B-1, 1:2:4 (20mm graded aggregate as in padding on flat roofs etc complete all as specified and directed.

M&L for providing cement concrete 1:2:4 type B-1 as in roof kerbs or mud stops rounded or chamfered on edges parapets,copings,bed plates complete all as specified and directed.

Material & labour for 40mm thick brick tiles laid on cement mortar 15mm thick in 1:6 and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement complete all as specified and directed.

All as per item No. 56 here in before but except tiles.

Dismantling water tanks, of any description exc 250 and not exc 500 ltr capacity cement complete all as specified and directed.

Taking up or down 15mm dia bore GI tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20mm dia bore GI tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

S&F GI tubing 15 mm bore 'medium grade', galvanised, with all fitting; and fixed complete to walls and ceiling etc complete all as specified and directed.

All as per item No. 61 above but fixing only complete all as specified and directed.

S&F GI tubing 20 mm bore 'medium grade', galvanised, with all fitting; and fixed complete to walls and ceiling etc complete all as specified and directed.

All as per item No. 63 above but fixing only complete all as specified and directed.

S&F in repair CP shower rose 15mm size fixed to iron pipe complete all as specified and directed.

Supply & fix PVC connection , 15mm bore size with PTMT nuts of length 450mm complete all as specified and directed.

Supply & fix in repairs bib taps, cast copper alloy, chromium plated with crutch or butterfly handles, screwed down for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed.

Supply & fix stop valve 15mm bore, cast copper alloy, screwed down high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete all as specified and directed.

Supply & fix in repairs 20mm bore stop valve/angle valve PTMT, screwed down with high pressure concealed type for both ends of iron pipe or for brass ferrule or to GI socket complete all as specified and directed.

All as per Srl item No 69 above but concealed type complete all aspecified

Supply & fix in repairs towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms) complete all as specified and directed.

Supply & fix in repairs rotational moulded polythene water storage tank double layer, ISI Marked of capacity 500 litre cylindrical vertical with closed top hoisted in position including supply and fix 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fitting and including PVC 20mm float valve complete all as specified and directed.

All as per Srl item No 72 above but fixing only complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Material & labour for preparation of new plastered surface of wall and applying two coat of oil bound distemper over a coat of alkali primer complete all as specified and directed.

Material & labour for preparation of newly plastered surface of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

All as per srl item No. 76 above but one coat of cement base paint on old surface incl preparation of surface complete all as specified and directed.

Material & labour for preparation of newly plastered surface of ceiling and applying three coats of white washing complete all as specified and directed.

All as per srl item No. 78 above but two coats of white wash on old surfaces of walls incl preparation of surface complete all as specified and directed.

Material & labour for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material & labour for preparation of old painted wooden surfaces of any description, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Material & labour for preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

All as per srl item No. 82 above but one coat of synthetic enamel paint on old steel surface incl preparation of surface complete all as specified and directed.

M&L for 25 mm thick PCC type B-0 ,1:2:4 ( using 12.5 mm graded stone aggregate) as in leveling course complete all as specified and directed.

M&L for 50 mm thick PCC type C2 ,1:3:6 ( using 40 mm graded stone aggregate) as in plinth protection and finishing the surface without using extra cement etc complete all as specified and directed.

M&L for 40 mm thick PCC type B-1 ,1:2:4 ( using 20 mm graded stone aggregate) as flooring including finishing the surface even and smooth without using extra cement complete all as specified and directed.

Supply only glass dividing strips, 3 mm thick , 38mm wide and fixing in position complete all as specified and directed.

Supply & fix in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including necessary cutting chasing etc. complete all as specified and directed.

All as per item No. 88 above but laid in trenches complete all as specified and directed.

Supply & fix 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including necessary cutting chasing etc. complete all as specified and directed.

All as per item No. 90 above but laid in trenches complete all as specified and directed.

S&F in repairs 75 mm size PVC (SWR) floor trap plain with grating including jointing with waste pipe with adhesive etc complete all as specified and directed.

S&F PVC (SWR) 110 mm any radius provided with access door laid in any position complete all as specified and directed.

All as per item No. 93 here in before but of 75mm radius complete all as specified and directed.

S&F 110 mm dia stack clamps made out of 25 mm x 4mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S&F 75 mm dia stack clamps made out of 25 mm x 4mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

Cutting grooves in brick wall, 75mm wide and 65mm deep in brick parapet wall for inserting APP membrane and making good the disturbed portion in CM 1:3 complete all as specified and directed.

Taking down carefully existing point wiring aluminum/ copper conductor or any type for light or fan or socket or power etc on wooden batten or in conduit including fittings and accessories like switches, sockets, lights fitting, regulator, wooden board and making good disturbed portion to match with existing complete all as specified and directed.

Material & labour for point wiring complete with single core 1.5 Sqmm (nominal area) PVC insulated multistranded, copper conductor cable (FRLS) drawn through and including PVC concealed conduit 25 mm bore (ISI marked) and accessories (concealed in wall & surface in ceiling complete including cutting ,chases & making good disturbed surfaces), terminated in and including pressed steel terminal boxes with plastic laminated backlite sheet top cover 3 mm thick (hylum) fixed with nickel polished screws with washers, earth continuity PVC cable(FRLS), copper conductor 1.5 Sqmm (nominal area) stranded with green insulation earth wire connected with earth dolly One light point / fan point / bell push point controlled by one way switch and/or through regulator complete all as specified and directed. complete all as specified.

All as per srl item No. 99 above but for 3 pin socket outlet 5 Amps on same board complete all as specified.

All as per srl item No. 99 above but for 3 pin socket outlet 5 Amps on independent board complete all as specified.

All as per description of srl item No 99 here in before but using 2.5 sqmm (nominal area) PVC unsheathed cable independent including PVC cable copper conductor with 2.5 Sqmm PVC insulated copper cable for continuous earth continuity conductor for 3 pin socket out let 15 Amps on independent board. complete all as specified and directed

All as per item No. 99 above but one light point controlled by two, two way switches complete all as specified and directed

S&F switch piano flush type 5 amp single pole one way complete all as specified and directed.

S&F switch piano flush type 15 amp single pole one way complete all as specified and directed.

S&F switch piano flush type 5 amp single pole two way complete all as specified and directed.

Supply and fix socket out let 5 Amp 5 pin flush type multi purpose complete all as specified.

Supply and fix socket out let multi purpose 2 in one, 6 pin 15 amps flush type complete all as specified.

S&F angle lamp holder insulated body with back plate including LED lamp 15 watt complete all as specified and directed.

Supply, installation, testing and commissioning of 20 watt 4 ft long LED batten housing made of extruded aluminium with milky white diffuser and inbuilt electronic driver system lumen output should be at least 1800 lumen with a CCT of 6000K, power factor should be greater than 0.9 with all accessories and connecting up complete with 3 core flexible cable white of size 23/0.0076 all as specified and directed. complete all as specified and directed. Make:C & S Cat Part No LTDCD1220W LED/WD or equivalent makes as in Appx 'B'

All as per Srl item No 110 above but old serviceable fittings with rod obtained from item No 98 above shall be reused after minor reapir complete all as specified and directed.

Supply and fix ceiling rose surface type bakelite 65 x 50 mm three terminal PVC / Polycarbonate isolated body complete all as specified.

Supply and fix bell push flush type, 5 Amps, 240V complete all as specified and directed.

Supply and fix fan regulator, electronic type, five steps single phase, including connection complete all as specified and directed.

Supply and fix sheet metal enclosures with double door ,detachablegland platesflush/surface mounting for MCBs fitted with bus bar,earth bar and neutral link 4 way TPN 415 volts complete all as specified and directed.

Supply and fix sheet metal enclosures with double door ,detachablegland platesflush/surface mounting for MCBs fitted with bus bar,earth bar and neutral link 8 way SPN 240 volts complete all as specified and directed.

Supply and fixing MCB 30 to 63 amps , 415 volts, TPN 10 KA. complete all as specified and directed.

S&F MCB SPN 240 V, 5 to 30 amp 10 KA complete all as specified and directed.

Supply and fix MCB SP 6 to 30 Amp, 240 volts 10KA. complete all as specified and directed.

S&F call bell single phase 240 volt complete all as specified and directed

Taking down old unserviceable bulkhead fitting and supply & fix bulkhead luminaire die cast aluminum body heat resistance prismatic glass cover with gasket including LED lamp 10 watt ,10 IP 65 complete all as specified and directed. Havells Cat Part No RUGBYNEONFT10WLED857SSYMTOPC ENDURA GUGBY NEON or equivalent in Appx 'B' .

Supply and fixing in replacement sub main wiring with two single core PVC insulated cable with copper conductor stranded and sheathed of size 4 sqmm, two runs in and including PVC concealed PVC conduct & ACC of medium grade not less than 20mm dia including 4 sqmm PVC insulated unsheathed multi stranded copper conductor cable to common earth and connected to earth dolly complete all as specified and directed. Note : Two run of 4 sqmm & one run of 4 sqmmalongwith PVC conduit will be measured as one unit.

Disconnecting and taking out old U/S underground cable of service connection of any size and type from pole to DBs/main switch complete all as specified and directed.

Supply & laying cable XLPE insulated screened PVC bedded armoured heavy duty electric cable with stranded aluminium conductor of size 16 sqmm 4 core, 1100 volts grade, complete all as specified and directed.

S&F sheet metal enclosure (Energy meter box) suitable for housing 02 Nos single phase energy meter and including 01 No of DB 8 way. complete all as specified and directed.

Material and labour for earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of theplate not less 1.5 mtr deep below normal ground level connected to GI earth wire 4 mm dia connected to earth plate by means of nut, bolts, check nut & washer of galvanized iron or of steel, GI earth wire will be protected by 15 mm dia GI pipe 'light grade', watering pipe 20 mm dia GI 'light grade', GI wire meshed funnel, alternate layer of char coal and salt on all side to earth plate upto thickness of 150 mm, filling of black cotton soil in earth pit upto ground level, PCC chamber recessed for and including RCC cover including all necessary excavation & earth work, earth wire connected to O/H continuous earth wire on pole, testing the earthing after completion complete all as specified and directed. Note :- (I) Earth pit shall be constructed 50cm from the side of excavation to avoid sinking of pit (II) PCC chamber shall be (1:3:6) using 20mm graded stone aggregate and 50mm thick RCC (1:2:4) type B-1 cover slab reinforced with 8mm dia TMT steel bars @ 100mm c/c both ways complete all as specified and directed. .

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc and getting out in soft/loose soil complete all as specified and directed.

Returning filling in layers including leveling watering and well ramming in layers not exc. 25cm thick complete all as specified and directed.

Removing surplus spoil to a distance not exc. 50m and depositing where directed at a level n. exc. 1.5m above the starting point complete all as specified and directed.

M&L for sand cushioning with a layer of sand 8 cm thick before laying of cable and 15 cm thick after laying of cable in trenches complete all as specified and directed. Note: Punned down thickness will be measured.

Supply and laying old size sub class 'B' bricks, laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length, adjacent/abuting each other complete all as specified and directed.

DUGGAL CONSTRUCTION CO

AAY KAY Constructions

PANKAJ MITTAL