Karnataka

Active

Works

Dam and Allied works

Construction of Check Dam-cum-Bridge across the nala at Galag village in Arkera Taluk of Raichur District

Minor Irrigation Department

Minor Irrigation Division Koppal | KOPPAL, Karnataka

Amount: ₹2.2 CrCloses: 20 Jul 2026

Tender Value

₹2.2 Cr

EMD Value

₹3.4 L

Closing Date

20 Jul 2026, 11:00 pm

Tender Inviting Organisation

Name

Minor Irrigation Department

Work Description

Construction of Check Dam-cum-Bridge across the nala at Galag village in Arkera Taluk of Raichur District

Tender Information

Tender ID

MI/2026-27/SM/WORK_INDENT11711

Reference Number

MI/2026-27/SM/WORK_INDENT11711

Tender Type

Open

Product Category

Dam and Allied works

Location

Minor Irrigation Division Koppal

Source Website

Subscribe to view

Documents Required

6 documents required · 6 mandatory

Technical Bid

RequiredContractor Registration Certificate

RequiredAnnual turnover certificate along with Balance sheetcertified/attested by Chartered Accountants should be uploaded with 18-Digits system generated unique number UDIN Number

RequiredWork done Certificate issued by competent authority not less than the rank of the Executive Engineer

RequiredDetails of existing commitments and on-going works as per standard bid document KW-1

RequiredLatest address and contact number for communication to be furnished

RequiredValid GST, ESI & EPF certifcate

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The intending Bidder/ firm/ company are advised to visit the work site before submission of the tenders.

The necessary Certifcates / documents in support of eligibility criteria fulflled as stipulated shall be scanned and attached to e- tender document. The original certificate / documents shall be produced prior to the opening of bid for verification. Scanned signature of the Bidder/ firm/ company authorized representative of the Bidder/ firm/ company shall be attached while uploading bid document.

If any of the dates mentioned above happens to be a general holiday, the next working day holds good

Conditional tenders are liable to be rejected. The officer competent to accept the tender shall have the right to reject any or all the tenders without assigning any reason whatsoever.

Corrigendum will be published in the website for all modifications or corrections if any

The contractor should mention their recent correct postal address & mail address in declaration forms

All materials like steel, cement etc., required for the above work should be procured by the contractor only. No departmental supply of any materials shall be made by Department

The contractor should adhere to the accepted execution plan submitted by him under any circumstances without linking to the pending payment of the work & also Land acquisition problems if any

Typographical errors, if any, will not be the ground for any claims by the Contractor.

The necessary Certificates / documents in support of eligibility criteria fulfilled as stipulated shall be scanned and attached to e- tender document. The original certificate / documents shall be produced for verification when demanded, otherwise the tender will be treated as non responsive bid and rejected

Scanned signature of the Bidder/ firm/ company authorized representative of the Bidder/ firm/ company shall be attached while uploading bid document.

Incomplete tender documents will be rejected

As per the Karnataka Building and other Constructions Workers Welfare Cess Act 1996, 1% of the bill amount will be deducted from the bills.

The contractor should adhere to the accepted execution plan submitted by him under any circumstances without linking to the pending payment of the work.

The contractor should furnish the name of the individual / firm / company with address & telephone No with place of registration, year of incorporation etc

Original documents shall be produced for verification at the any stage of tender process, Failure to produce original documents will lead to disqualification. work done certificate should have all the details CR no, work order issuing date, work completion date and year as asked in bid document

The Applicant shall be registered in KPWD and shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by GOK/GOI

Restrictions on Public Procurement from Bidders of certain countries as per Government order No. FD 455 Exp-12 2020 Bengaluru dated:01-04-2023

During the execution of works, if any minor minerals are required, contractors have to abide by the prevailing rules and Acts applicable to Minor Minerals. As per the prevailing rules, for any use of Minor Minerals, the contractor has to submit the mineral Dispatch Permit (MDP) obtained from Mines and Geology Department. If mineral Dispatch permit (MDP) is not submitted by the contractor along with the bill, the prevailing penalty DMF contribution as per Karnataka Minor Mineral Concession Rules 1994 (as amended from time to time) will be deducted from the contractors bill

The agencies participating in the tender shall be registered in the Construction Labor Board as per the G.O. No. LD 300 LET 2006 Dated:18-1-2007 and Addendum No. LD 95 LET 2013 Bengaluru Dt:1-4-2013. Also the contractors entrusted with the work shall employ the labors only who have registered in the Karnataka Building and Construction Workers Welfare Board failing which the contractor shall be liable for any further action as deem fit by the authority.

Within 20 days of receipt of the Letter of Acceptance, the successful Tenderer shall deliver to the Employer a Security deposit in any of the forms as mentioned in bid document for an amount equivalent to 5% of the Contract price plus additional security for unbalanced tenders in accordance with Clause 25.5 of ITT and Clause 44 of the Conditions of Contract for all works.

The contractor has to make his own arrangements for procurement of all the required materials and the materials so procured shall confirm to the relevant IS Specifications and obtain necessary quality certificate from authorized quality control.

The Contractor is fully responsible for the Equipment / Material until the same is handed over to the EXECUTIVE ENGINEER in an operating condition after commissioning. The Contractor is responsible for the proper maintenance of equipment / material as well as protection of the same against theft, elements of nature, damages etc., while in his custody as well as after erection until the same is taken over by the EXECUTIVE ENGINEER under due acknowledgment in writing.

The tenderer shall also disclose if there are any bankruptcy proceedings against him

The Work Done Certificates shall be issued by the Executive Engineer with indent number mentioned (if work done in Karnataka State), otherwise it shall be issued/counter signed by Superintending Engineer (if the work is done in other states).

Sub-Leasing/G.P.A of Work is Prohibited

Each Item Of BOQ To be read as with all lead and lifts and including loading and unloading charges and all other charges and as per the direction of Engineer in charge.

Uploaded drawings are for TENDER PURPOSE ONLY.

The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the work listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent

Income Tax : Latest copy of the Income Tax Clearance Certificate and Sale Tax Clearance PAN and TAN Nos. to be uploaded

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee into the respective receiving bank accounts of KPPP Portal on or before the last date and time of bid submission

The tender processing charges paid by the bidder/ firm/ company are not refundable even if the tenders are cancelled

All other terms and conditions as per KW-4 tender documents.

The tenderer has to quote his rate by excluding GST. However contract will be concluded for the AMOUNT (Exclusive of GST) but Applicable GST will be paid extra prevailing at the time of execution.If the GST rates are revised during the contract period, the Tenderer/Employer has to accept the revised GST rates for making payment/recovery

Technical Criteria

General

Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)

Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)

Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)

Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. (2021-22 TO 2025-26) Executed in any one year the minimum quantities of work: 1) Earth work(Excavation, Embankment) etc18869.58 Cum, 2) Cement concrete (including RCC & PCC) 1347.21 Cum,3) Steel works for RCC (Reinforcement Steel) 56.04 Tonne

Work Done Certificate

Capabilities of Vendor

Contractor Registration Certifcate

PWD Registration Certificate (Class I/II/III/IV)

Reports on the financial standing of the tenderer, Such as profit and loss statements and auditors reports for the last five year

Others -- certified vopy

Financial Status

To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. (2021-22 TO 2025-26). Achieved in at least two financial years a minimum financial turnover of Rs.449.12 Lakhs.(Financial Turn over of previous years shall be given a weightage of 10% per year to bring them to the price level of FY 2026-27).

Audited CA Certificate of Annual Turnover

Liquid assets and or availability of credit facilities of not less than Rs.76.56 Lakhs (Credit lines / Letter of credit / Certificates from Banks) for meeting the fund requirement etc

Line of Credit

Others

List of existing commitments and ongoing works

Others -- Others -- Certified copy

EPF & ESI Registration Certificate & Previous month ESI Payment challan.

Others -- Others -- Valid GST, ESI & EPF certifcate

Satisfactory completion (at least 90% of the contract value), as Prime contractor, at least one similar work such as Construction of checkdam cum Bridge/Bridge cum Barrage/ Barrage/ Bridge not less than Rs.112.28 Lakhs during the last five years (2021-22 to 2025-26).The work done certificate should be obtained duly signed from an Officer not below the rank of Executive Engineer of the concerned division. (Workdone of previous years shall be given a weightage of 10% per year to bring them to the price level of FY 2026-27)

Work Done Certificate

Work Locations

Fee & Financial Details

Tender Fee Amount

₹5,000

EMD Fee Amount

₹3.4 L

Important Dates

Last Activity

8 Jul 2026

Published

8 Jul 2026

Bid Opening

22 Jul 2026

Download Ends

19 Jul 2026

Pre-Bid Meeting

10 Jul 2026

BOQ Preview

•

Construction of Check Dam-cum-Bridge across the nala at Galag village in Arkera Taluk of Raichur District

•

Cutting and burning or disposing off Apu / Jondu from marshy areas as directed with all other ancillary operations complete. -complete with all lead and lifts including loading and unloading and as pe...

•

Providing and placing sand bags consisting of empty cement bags filled with 35 to 40 kg locally available sand for forming ring bund including cost of all materials, labour, plugging joints with selec...

•

Filling clayey soil between two rows of sand bags placed for forming ring bund including cost of all materials, labour,tamping, plugging leakage points and all other ancillary operations complete.-com...

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

•

Preparing foundation bed for masonry or concrete in rock portion by removing all loose material by wedging / chiselling and disposing off the same as directed and cleaning the surface with air and wat...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

•

Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...

•

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

•

Providing and laying in position Reinforced cement concrete for all Super structures of building Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The gr...

•

Providing and forming expansion joint for spillway bridge consisting of 75 x 75 x 6 mm angles 2 numbers provided with 250 mm long 12 mm dia. anchors fixed to both flanges at 150 mm c / c and 140 x 6 m...

•

Providing rubble / boulder and sand filling behind abutment and return walls in layers including cost of all materials, labour, watering, ramming and all other ancillary operations complete. complete ...

•

Providing and constructing 75 mm dia PVC pipe weep holes for concrete / masonry walls including providing 200 x 200 x 200 mm size porous concrete block made of cement and 20 mm down coarse aggregate i...

•

Providing and constructing dry rubble stone pitching with pin headers at 2 per m2 using stones and stone chips from approved source including cost of all materials, labour, hand packing / wedging ston...

•

Design, fabrication, supply, erection and commissioning of embedded parts consisting of sill beam, wheel tracks, seal seatss, guide rails, gate groove liners etc., with all accessories for canal escap...

•

Design, fabrication, supply, erection, testing and commissioning of sliding type interchangeable stoplog gate elements consisting of skin plate, stiffeners, horizontal and vertical girders, lifting ho...

•

Reinforced cement concrete M15 grade boundary pillars of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting. complete with all lead and lifts inc...

•

Providing casing embankment using semi-pervious / pervious approved soil from borrow areas in layers of 250 to 300 mm ( before compaction ) including cost of all materials, machinery, labour, all othe...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

e_payment.doc

Sample Submission Guidelines • 0.19 MB

11711 FINAL.docx

Tender Document • 3.34 MB

RoyaltyRate.pdf

Design Document • 4.03 MB

FD417EXP-12-2024-Dtd-09-08-2024.pdf

Commercial Information / Worksheet • 0.43 MB

labour.docx

Tender Submission Guidelines • 0.98 MB

detailed_specification.doc

Instructions to Tenderers • 0.61 MB

Ready to Participate?

Download all tender documents and submit your bid