Supplying Erection Testing and Commissioning of Submersible Pumping Machinery along with Control Panel Delivery Pipe Submersible Cable CI Specials etc. at New Pumping installation at T Well No. M 27 in Sector 9 Panchkula

13.32:- Providing and fixing bolts including nuts and washers complete. [Through Rate]

24.1.4:- EARTHING AND LIGHTENING ARRESTOR 4. Earthing with tinned copper earth plate 600mmx600mmx3mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) etc. complete as required. [Through Rate]

24.1.10:- EARTHING AND LIGHTENING ARRESTOR 10. Providing and fixing 25 mm x 5mm copper strip on surface or in recess for connections etc. as required with all labour and material. [Through Rate]

24.5.1.7:- MISCELLANEOUS ITEMS 1.7. Supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with PVC for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with IS:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of Engineer- in-Charge. Submersible Copper Cable 3 Core 25 sqmm [Through Rate]

23.22.1.5:- MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 1.5. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer- in-charge of the work. TRIPLE POLE MCCB 200 to 250 Amp, 25 KA [Through Rate]

23.22.8.3:- MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 8.3. SITC Four pole ON LOAD Manual change over switch in SS enclosure of following Ratings 200 amp 415 volts [Through Rate]

22.151.1:- Providing and laying flanged C.I. standard specials such as tees, bends, collars, tapers, caps etc., suitable for flanged jointing as per IS : 1538 : 1. Up to 300 mm dia [Through Rate]

20.10.3:- Extra for fixing sluice valves/flap valves socketed or flanged including cartage from stores or nearest Railway Station to site of works 3. 150 mm i/d [Through Rate

20.11.3:- Providing and fixing cast iron double flanged swing check type reflux (non return) valves PN-1.6 marked with IS:5312 including nuts and bolts marked with IS:1363, rubber sheet marked with IS:638 etc., carriage loading, unloading, stacking, handling, re-handling etc. Complete in all respect to the satisfaction of Engineer-incharge 3. 150 mm i/d [Through Rate]

20.15.3:- Providing and fixing C.I. Kinetic air valves conforming to and marked with IS: 14845 including carriage, loading, unloading stacking, handling, rehandling etc., Brilling, tapping, screwing in valves connections complete in all respects to the satisfaction of Engineer-in- Charge. 3. 150 mm i/d [Through Rate]

20.63.2:- `Providing, lowering, laying in trenches, aligning, fixing in position and jointing Ductile Iron (DI) ISI marked K-9 grade SandS pipes as per 15:8329-2000 (amended up to date), with internal cement mortar lining for potable water with rubber ring (EPDM/SBR) joints as per IS: 5382 -1985 (excluding special accessories) complete including all material, labour, hydraulic testing and commissioning as per Technical Specifications and as per direction of Engineer. Note: E/W to be measured and paid separately. ` 2. 150 mm i/d [Through Rate]

EL268. M.S. Pipe 150mm dia, [Rate]

EL270. M.S. Pipe 100mm dia, [Rate]

20.124.104:- Supplying, erection, testing and commissioning of submersible pumping sets as per BIS SPECIFICATION No. 8034-1989 (as amended upto date for pumps) and IS 9283-1979 (as amended upto date for motor) the pump motor sets should be capable of pumping clear fresh cold water having characteristics as specified in Clause-4 of IS 8034-1989 and Clause 4.1 of IS 9283-1979. 104. LPM 1000 Head 135 BHP 50.00 Say Round BHP 50.00 [Rate]

N S Items:-Supply and jointing LT Three Core power Cable aluminium conductor 120 Sqmm make Polycab/Havells/KEI XPLE insulated IS: 7098 including cost of jointing material as well carriage loading and unloading etc. complete in all respect to the entire satisfaction of EIC.

N S Items:-P/F of Copper wire multistand 35 Sqmm.

N S Items:- Providing and Fixing of Kit Kat 500 ampere ASCO make 3 Nos. including provision for fixing on wooden Board, copper wire 35 Sqmm, Copper thimble, empire tape roll, etc. complete in all respect to the entire satisfaction of EIC.

N.S Items:- P/F of MS Base Plate 2’ x 2’ x 3⁄4’ and MS Garder 6” x 4” x 5’ long ISI Mark Heavy Duty complete in all respect to the entire satisfaction of EIC.

NS Items:- P/F of Fully Automatic Control Panel suitable upto 50 HP Electric Driven Submersible Pumping Set Make LandT / BCH / Schneider, Consisting of locking arrangement, Powder Coating, Gas Cut and Packing insulation insulator of required site of making provision for fixing of metering system, Amp. Mtr., Volt Mtr., Contractor Block, Overload Relay etc. complete in all respect to the entire satisfaction of EIC

N S Items:- Providing and Fixing of MS Flange 6` (14 mm) ISI mark Heavy Duty for both side of MS Pipe complete in all respect to the Entire Satisfaction of EIC.

N S Items:- Providing and Fixing of MS Flange 4` (14 mm) Heavy Duty ISI mark for both side of MS Pipe complete in all respect to the Entire Satisfaction of EIC.

N S Items:- PF of Electrical CT Meter Box size 43” length 16” width and 8” depth (heavy duty) shockproof and rustproof cable entry from bottom and or side 100% waterproof pole mounting arrangement tamper proof mtc. free fire retardant class FV-0 as per IS:11731 PartII or V-0 as per UL-94 High heat distoration (200C as per IS:10192) with angle fasner nut bolt and site fitting complete in all respect to the entire satisfaction of Engineer-in-Charge.

N S Items:- Providing and Fixing of Electrical Current Transformer (CT) 100/5 make Concard/Vishal/Secure make consisting of 4 No LT CT (LCT-A,LCT-B,LCTC,LCT-D) including Testing fees for CT 100/5 at UHBVN Lab complete in all respect as per entire satisfaction of EIC.

Please Enable Macros to View BoQ information