REPAIR TO PERIMETER WALL, GATE, FENCING, SECURITY BOUNDARY WALL, STEEL WORK, BARBED WIRE PCC PATH, HARD STANDING KERB STONE, CHEQUERED TILE, INTERLOCKING TILES, AND CERTAIN B/R WORKS AT WAR MEMORIL COLONY, 60 SCIENTIST HOSTEL AND MES KEY PERSONAL Q

Amount

Demolition of brick or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as spd and directed.

M&L for Brickwork with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:4) Complete all as specified and directed.

--- ditto as item No.2.00 above --- but except bricks.

M&L for brick work with bricks old size brick, straight or curved on plan or radius in half brick thick built in cement mortar 1:4 complete all as specified and directed.

Taking down old cement plaster from brick or concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick in two layers (10+5) on fair faces of brick work or concrete surfaces of wall in cement mortar (1:4) surface finished even and smooth without using extra cement, including taking down old plaster of any type complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of cement base paint over one coat of cement primer complete all as specified and directed.

Demolition of cement concrete in ground floor and paving not exc.15 cm thickness (below or above ground level) complete all as specified and directed.

M&L 75 mm thick PCC 1:4:8 type D2 using 40 mm graded aggregate as in sub base complete all as specified and directed.

M&L for Chequered cement concrete tiles Squared/rectangle 20 to 22mm thick with grey cement and pigment set, jointed and pointed in neat cement slurry as in floors over and including cement screed bedding 15mm thick in cement mortar (1:6) complete all as specified and directed.

M&L for factory made machine pressed precast concrete interlocking paver block of any shape and size conforming to IS-15658-2006 of 60mm thickness, M-30 grade with grey cement and no pigment over and including 20mm thick sand cusion complete all as specified and directed.

M&L for 75 mm thick PCC (1:3:6) type C-2 as in plinth protection/ Path & finishing the surface even & smooth without using extra cement complete all as specified & directed.

M&L for Providing cement concrete 1:2:4 type B-1 in roof kerbs or Coping on compound wall, mud stops, gola, rounded, fixing of angle on wall etc flat or chamfered on edges,complete all as specified and directed.

Taking down cement plaster from RCC Chhajja, roof projection, fins and facia and other similar RCC items and M&L for 10mm thick rendering in cement mortar 1:3 finishing the surface even and smooth without using extra cement over 15 mm thick dubbing coat in cement mortar 1:3 complete including use and waste of nesessary form work and scaffolding work for repair upto 2nd floor roof top complete all as specified and directed.

Demolition of reinforced cement concrete (any RCC work) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for RCC (1:2:4) type B-1(using 20 mm graded stone aggregate) as in cills, Fins, fascias, louvres, parapets, rcc coping and railings exc. 60cm in height, , including necessary form work etc complete all as specified and directed.

S&F mild 10 mm dia and over deformed TMT bars cut ot length bent to shape required including cranbing, bending spirrally, hooking ends and binding with and including mild steel wire annealed net less than 0.9 mm dia or securing with clips all as specified.

---- Ditto --- item No 17.00 above but 5 mm dia and over upto and including 10mm dia in stirrups, spacers and binders etc complte all as spd and directed.

Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings, beams, rcc coping and similar work including attached pillasters, buttresses, etc.; vertical or to batter for fair finished surfaces complete all as spd and directed.

M&L for Providing precast cement concrte type B0 1:2:4 (12.5mm graded agg) for louvres and jallies, 25mm thick (mea sured solid), including all mould- ings but excluding frame set in CM 1:4 (Pre cast frame shall be measued separately and paid for under item 04032) and approval of GE including dismantling old RCC jali complete all as specified and directed.

Dismentling wrought iron or mild steel work of such as grill/ gate, roof purlin , Fencing post etc not otherwise provided for complete all as specified & directed.

S&F Mild steel framed work as in doors, gates, grills, grating pintel higes stope hand made sliding bolts etc with ends of bars shouldered and /or riveted or forged into spikes framed guard bars and conforming to Fe 410-0 or 310-0 of angle iron of other sections complete drilled for fixing of steel sheeting or other coverings to be prepared for handing or sliding with and incl either hooks and hinges doors( Exclusive of steel sheeting or other covering running rails and guides) and hanging also fastening and fixing with one shop coat of Zinc Chrmate pait (incl preparation of surface0 at contractor wksp before febrication, complete all as specified and directed.

S&F for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L applying two coats of synthetic enamel paint over a coat of red oxide 0r zinc chromate primer including preparation of new steel or iron surfaces exc 10 cm width or girth, complete all as specified and directed.

Dismantling barbed wire from any type of posts complete all as specified and directed.

S&F in repair 2 strand galvanised steel barbed wire 2.24mm dia, barbed with 2mm dia barbs at 75 mm spacing and straining & fixing to RCC posts etc including securing or tying at crossings with galvanised mild steel wire staples or steel pins etc complete all as specified and directed. Note: (Each line wire to be measured).

Excavating in post holes (or similar holes) in loose/ soft soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.

M&L for removing excavated soil n exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

M&L cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in foundation complete all as specified and directed.

Dismantling fencing wire mesh, any type complete all as specified and as directed.

Supply only chain link MS galvanised fencing any size complete all as specified and directed.

Fixing only chain link fencing including line wires any mesh, size, and type to any type of standard, rails, straining bolts, etc including Provn of binding wire complete all as specified and directed.

S&F for 10-12 mm dia round steel bar fixed independly in the chain link for wooling chain links mesh including. Tieing with GI wire complete all as specified and directed.

S&F for Mild steel angle iron fencing post and sturts in fencing incl necessary cutting drilling welding etc and bending to swan neck shape as required and drilling holes notching for wives etc incl S&F necessary nut-bolt as per site requirement complete conforming to Fe-290 Gde E-165 complete all as specified and directed.

m/s sahu enterprises

The Real Contractors