REPAIR TO SEWER LINES AND SEPTIC TANKS/SOAKAGE WELL AND CLEANING OF SEWER LINES INCLUDING MAN HOLES AND SANITARY FITTING AT ZONE I TO IV AREA OF BASE HOSPITAL UNDER GE E/M BHDC-10

Amount

Cleaning of sewage pipe by rodding upto 150 mm internal dia at any depth and removal of sludge / silt / liquid / mud and sand etc (in foul position) to out side the MD premises including provisioning of water, bamboo, etc complete all as specified and directed.

Cleaning manholes of any size upto 1.50 mtr in depth and removal of sludge / slit / mud and sand etc (in foul position) to out side the MD premises complete all as specified and directed.

All as per srl item No. 2 above but depth exceeding 1.50 mtr.

M&L for cleaning of manholes/Septic tanks/soackage pits/etc of any size and depth by hydraulic operated high pressure suction sewer cleaning machine having suitable tank cap incl skilled driver operator & labour and removal of sludge / silt / liquid / mud in foul position and disposing the same out side MD premises complete all as specified and directed. (Note : Maximum of 60 to 80 CUM or No of trip 20 Nos will be cleaned in a single working day by the Septic tank cleaning tanker machine. This item must be excuted on each every Ten days).

M&L for cleaning of chocked sewar line of dia 100 mm to 300 mm in any depth by hydraulic operated high pressure suction cum jetting sewer cleaning machine having jetting tank capacity of 3000 ltrs and 260 LPM with min 145 bar, suction flow of 10200 LPM incl skilled driver & operator supervising Engineer for cleaning of chocked sewer line including providing water for jetting and removal of sludge/silt/liquid / mud and sand (in foul position) etc out side the MD Premises all as specified and as directed. (Note : Maximum of 750 RM will be cleaned in a single working day by the Jetting machine,The cleaned sewage line has to be maintained and keep fully functional by removing and type of blockage,For any damage/casualty occure during working in sewer line or MH or at Other work shall be the responsiblity of the contractor and the contractor shall be take measures for working in sewer work and water will be provided by contractor.This item must be excuted on each every Ten days)

Excavation in trenches not exc 1.50 mtr wide or 10 sqm on plan, 1.50 mtr in depth for manholes & sewage lines, drain, etc and getting out in soft/loose soil complete all as specified and directed.

All as per srl item No. 06 above but depth exc 1.50 mtr and n. exc 3.0 mtr.

Returning, filling in including spreading levelling, watering and well ramming in layers not exc 25 cm thick in any type of soil complete all as specified and directed.

M&L for removing excavated soil to a distance exc 500 mtr and not exc 1.0 km and depositing where directed complete all as specified and directed.

Demolition and breaking up drain pipes (Salt glazed stoneware)/pvc set in cement mortar 100 mm internal dia of pipe complete all as specified and directed.

All as per srl item no.10 here-in-before but 150 mm internal dia of pipe.

S&F Reinforced concrete pipes,class NP2 lais and jointed complete with collars ware drain pipes laid in trenches and jointed internal dia of pipe 100 mm complete all as specified and directed.

S&F 100mm dia UPVC pipes, laid and jointed complete including all accessories connect to exist and new drain pipes laid in trenches or floors and complete all as specified and directed.

S&F Reinforced concrete pipes,class NP2 laid and jointed complete with collars ware drain pipes laid in trenches and jointed internal dia of pipe 150 mm complete all as specified and directed.

S&F 150mm dia UPVC pipes, laid and jointed complete including all accessories connect to exist and new drain pipes laid in trenches or floors and complete all as specified and directed.

M&L cement mortar concrete bed to drain pipes in PCC 1:3:6 type C-2 (using 40 mm graded crushed stone agg) incl packing of pipe 100 mm dia complete all as specified and directed.

All as per srl item No.16 here in before but internal dia of pipe 150 mm dia

Demolition of brick work built in cement mortar of any description complete all as specified and directed.

M&L brick work with sub class 'B' bricks straight or curved on plan not exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M/L for brick work with sub class 'B' straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed.

M&L PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation, filling & mass concrete all as specified and directed.

M&L for cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone agg) as in coping, benching, etc incl form work as required complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position complete all as specified and directed.

M&L for Reinforced cement concrete as in landing slabs in cement concrete (1:1 1/2 :3) using 20 mm graded crushed stone aggregate including necessary form work, etc complete all as specified and directed.

M&L for mild steel deformed or twisted bars 10 mm dia and over cut to length be not shape as required including cranking, bending spirally for hooping for coloumns, hooking and binding with MS wire (annealed) not less than 0.9 mm dia or securing with clips all as directed.

All as per srl item No. 25 here in before but 6 mm to 8 mm dia bars

S&F SFRC manhole cover and frame 75mm thick (Square/rectangulr/circular) with suitable size of exist manholes and placed over manholes at site complete all as specified and directed.

Cutting into existing manholes for connecting new mains pipe making good to pipes rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finish and reforming benching as required, internal dia of pipe 100 mm dia complete all as specified and directed.

Cutting into existing manholes for connecting new mains pipe making good to pipes rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finish and reforming benching as required, internal dia of pipe 150 mm dia complete all as specified and directed.

Demolition of stone slabs laid bedded and pointed in any mortar and cladding tiles of any description or thickness in floors, aprons, walls, etc and removing the debris off MOD land complete all as specified and directed.

M&L Granite (of any type)18 to 20mm thick work (table rubbed and polished) in floors,steps, jambs, pillars, window-cills,cooking platforms including 20mm thick screed bed or bedding in CM 1:6 for laying floor finishes complete all as specified and directed.

M&L for 10-12mm thick Zed black granite stone(superior Quality) slab of (table rubbed and polished) as in wall lining (venering to wall) and the like, over & incl 10 mm thick plastering in CM 1:3 incl pointed in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and directed.

M&L for making full rounding to edges of stone slabs (any type stone), such as in steps, cooking platform and other similar works and polishing complete all as specified and directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) and rubbish off out side the premises complete all as specified and directed.

M&L 25 mm thick PCC 1:3:6 Type B1 (using 20 mm graded stone aggregate) below tiles for levelling of existing surface complete all as specified and directed.

M&L for 7mm to 8mm thick ceramic non skid tiles coloured of area exc 0.11 Sqm but nexc 0.18 Sqm (400x400mm) in flooring set and jointed in neat cement slurry and pointed in coloured cement to match with tiles laid on 15mm thick cement screed (1:4). all as specified and directed Make:Somany/ Kajaria/ johnson

M&L for glazed ceramic coloured tiles in vertical surfaces as skerting/dado etc size 600mmx300mmx8-10 mm thick mm thick set and jointed in neat cement slurry to matching with tiles laid on plaster 10mm thick in CM (1:3) matching with floor tiles all as specified and directed Make:Somany/ Kajaria/Johnson

Taking down cement plaster on brick or stone walls etc. including raking out of joints, hacking for key, scrubbing down with water etc. any description complete all as specified and directed.

M&L rendering 15mm thick in cement mortar 1:4 on other than fair faces of brick surfaces of walls finished the surface fair and even without using extra cement complete all as specified and directed.

M&L 10 mm thick plastering in cement mortar 1:4 finished even and smooth w/o using extra cement on brick surface of ceilings complete all as specified and directed.

M&L for preparation of new plastered or unplastered wall surfaces and applying three coats of white wash on ceiling complete all as specified and directed.

M & L preparation of new surfaces of walls plastered or unplastered and applying two coats of cement base paint over a coat of white wash to walls to obtain uniform surfaces including making good the surface complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutter from the frames) n exc. 1.5 sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 sqm but n exc 4.00 each complete all as specified and directed.

S&F of solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, fixing in opening complete all as per manufaturer instructions, specification, drawings and directed. Make - Rajshree / Sintex

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails,MS frame shall be covered with heat moulded plain colour PVC 'C' chanel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles &rails eith suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing inthe frame at site as per specification & drawing incl 3 Nos 100mm stainless steel Hinges, 2 Nos 200 mm Aluminum Tower bolt and 2 Nos 150 mm Aluminum handle complete all as specified and directed.

S&F Grating doom 100mm dia of PTMT (min wt 25 gms) fixed in repairs complete all as specified and directed. Make- Prayag/ Polytuf

S&F in repair UPVC size in 150mm square floor trap grating with anti mosquitoes filter complete all as specified and directed.

S&Fin repair vitreous china wash hand basin white flat back of size 550mm x400 mm including cutting for and pinning in end of brackets,32 mm waste fittings,brass chromium plated for glazed ware sinks,basins etc.including 15 mm bore CP fancy type piller tap with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed.and flush pipe of polytethylene of low or high density or PVC 32 mm dia complete all as specified and directed.

S&Fin repair vitreous china wash hand basin white Oval type including cutting for and pinning in end of brackets,32 mm waste fittings,brass chromium plated for glazed ware sinks,basins etc.including 15 mm bore CP fancy type piller tap with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed.and flush pipe of polytethylene of low or high density or PVC 32 mm dia complete all as specified and directed.

S&F in repair vitreous china urinals, bowl type (back corner wall type),including polytethylene of low or high density or PVC 32 mm dia and 15mm dia stop cock etc.with 60mm long screwed pointing around urinal back in cement complete all as specified and directed.

S & F Vitreous China wash down water closet pan (pedstal pattern) white (squatting pan & trap including connection to drain (or out going pipe and to flushing pipe anti syphonic pipe etc and fixed in repairs complete all as specified and directed. Make-Cera/ Parryware/Hindware

S & F Vitreous China squatting pan , "Orrissa" pattern size 580 X 440 mm white with intgrel footrest (excluding flushing cistern & flush pipe complete including provision of lime concrete complete all as specified and directed.Make-Cera/ Parryware/Hindware

S & F one piece Vitreous China wash down water closet pan with jet, white colour (including connection to drain or out going pipe and to flushing pipe anti syphonic pipe etc and fixed in repairs complete all as specified and directed. Make-Glocera (Model : Rose Hip, GS/WC/1013)

S & F in repairs plastic water closet seat , black/white, closed pattern with flat bottom & cover and mild steel chromium plated or aluminised hinging device.Make-Cera/ Parryware/Hindware

S & F in repairs soft close plastic water closet seat cover, white colour and fixed complete all as specified and directed.Make-Cera(Model : Campbell, Cat No. 2398)

S & F in repair Wall mounted grab bar 300 mm and fixed in position complete all as specified and directed. Make-Cera or hindware

Supply and fix PVC valveless syphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe in repairs.Make-Cera/ Parryware/Hindware

S&F in repair of tiles corner guard stainless steel size in 90 cm x 10 cm x 10cm SS-304 with standard screws fittings as in wall tiling complete all as specified and directed

Taking up or down 15 mm bore steel water tubing and connections including cleaning for refixing or removal to store

S&F 15mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches.

Refixing 15 mm bore old steel tubing and conncetions in new or old position to walls

Taking up or down 20 mm bore steel water tubing and connections including cleaning or refixing or removal to store

S&F 20 mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches.

Refixing 20 mm bore old steel tubing and conncetions in new or old position to walls

S&F in repairs PVC waste pipe for WHB with complete fitting etc 32/38 mm dia complete all as specified and directed. Make- Prayag/ Polytuf

S&F PVC connection 15mm dia, 60 Cms long with PTMT nuts on both ends fixed in repairs complete all as specified and directed. Make- Prayag/ Polytuf

Dismantling of CI soil,PVC (any type) rain water pipes, cast and vent pipes of any dia, any pattern including all fittings.

S&F 75 mm dia Hubless cast iron pipes,waste and vent pipes in any length with or without ears,fixed to walls with stack clamps including bends,elbows and Tees or laid in trenches or in floors or walls and complete all as specified and directed.

S&F 100 mm dia Hubless cast iron pipes,waste and vent pipes in any length with or without ears,fixed to walls with stack clamps including bends,elbows and Tees or laid in trenches or in floors or walls and complete all as specified and directed.

S&F in repair 100 mm dia cast iron floor trap including joints, etc complete all as specified and directed.

S&F in repair 100 mm dia cast iron pipes pipes bends (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.

S&F in repair 100 mm dia cast iron pipes pipes branch pieces,single (equal or unequal) Tee, sockets, etc with oval access door if required and fitted with stack clamps, etc complete all as specified and directed.

S&F in repairs MS clamp for CI pipes/ PVC pipes 100 mm bore made out of 40mm X 6 mm flat iron and 12 mm round bars including bolts and nuts and securing to wall in PCC 1:2:4 and making good in cement mortar 1:3 complete all as specified and directed.

Supply and fixing of PWTS- AM-600-01 series low linear density poly ethyleneTank which is an advance version of Septic Tank withcapacity of 4800 liters per day, diameter of 2070 mm and height of 2510 mm. Tank has three zone, first zone is septic zone where sludge is stabilized by anaerobic digestion. Second zone is sedimentation zone and thethird zone is pall ring media zone having surface area of 190 Sq.mt / Cum and retain micro-organism long enough to digest the organic waste which results in70% of BOD reduction from final out let. It provided with inlet & outlet pipe of 100 mm dia.Vent pipe of 50 mm dia, Internal piping, manhole cover of 400 mm dia.Life span of the septic tank & pall ring media is more than 50 years.including Excavation as required & earth work for foundation or shafts wells,cesspits, manholes and septic tank etc and connection with existing new sewer system,Returning,filling in including spreading,levelling,watering and well ramming and removal of excavted material exc 1.5km but not exc 5.00km and deposintg were directed. Make: Sintex/Supreme

Supply and fixing of PWTS Soak Pit Series low linear density poly ethylene tank which is an advance version of soakpit with capacity of 4800 liters per day with filter media, diameter of 2070 mm and height of 2510 mm.there is so many holes in tank.by which water goes in to land through holes. including Excavation as required & earth work for foundation or shafts wells,cesspits, manholes, soak-pit and septic tank etc and connection with existing new sewer system,Returning,filling in including spreading,levelling,watering and well ramming and removal of excavted material exc 1.5km but not exc 5.00km and deposintg were directed. Make: Sintex/Supreme

M&L in replacement for stainless steel work as moveable trolly with caster wheel (Shelves) size 1500mm x 700 x 1.50mm (Min 61 Kg) etc conforming to gde- 304 with all jointing accessories etc complete all as specified and directed. (legs & frame are also of SS 304)

M&L in replacement for stainless steel work size 2120 mm x 700 x 1.50mm (Min 78 Kg) etc conforming to gde- 304 with all jointing accessories etc complete all as specified and directed. (legs & frame are also of SS 304)

M&L in replacement for stainless steel work size 1630 mm x 700 x 1.50mm (Min 64 Kg) etc conforming to gde- 304 with all jointing accessories etc complete all as specified and directed. (legs & frame are also of SS 304)

M&L in replacement for stainless steel work size 1220 mm x 420 x 1.50mm (Min 138 Kg) etc conforming to gde- 304 with all jointing accessories etc complete all as specified and directed. (to be fixed & fabricated as per site)

S&F in replacement of 2 Bay scrub sink made out of 16 guage thick 304 graded brushed finished stainless steel, 1.6mm thick, 1500mm length, width 565mm, height 1365mm with photoelectric sensors - 02 Nos, thermo static mixture valves - 01 No, Solenoid valves - 02 Nos with foot operated switch - 02 Nos, Spouts - 02 Nos for foam supply all as specified and directed.

S&F in replacement of One Bay scrub sink made out of 16 guage thick 304 graded brushed finished stainless steel, 1.6mm thick, size as per standard with photoelectric sensors - 02 Nos, thermo static mixture valves - 01 No, Solenoid valves - 02 Nos with foot operated switch - 02 Nos, Spouts - 02 Nos for foam supply all as specified and directed.

S&F in repair 15 mm bore surgical elbow single lever wall mixer with ero disc Cat No. 1042 screwed down, screwed for iron pipe or brass ferrule fixed complete all as specified and directed. (Make: Vijay or equivalent)

S&F in repair 15 mm bore surgical elbow action Bib taps fancy type Cat No. 1035 screwed down, screwed for iron pipe or brass ferrule fixed complete all as specified and directed. (Make: Vijay or equivalent)

Note I :-Not cleaning of sewage line of any dia pipe within 3 Days a panel recovery of Rs 500.00/complaint/per day shall be imposed on the contractor and the same shall be recovered from the contractor's dues

Note II :-Not cleaning of manholes/septic tanks/soackage pits/etc by mechanical opertated high pressure suction sewer cleaning machine within 7 Days a panel recovery of Rs 10000.00/complaint/per day shall be imposed on the contractor and the same shall be recovered from the contractor's dues

Note III :-Not cleaning of sewer line by jetting mahine within 7 Days a panel recovery of Rs 15000.00/complaint/per day shall be imposed on the contractor and the same shall be recovered from the contractor's dues

sony engineering works

MAA SANTOSHI ENTERPRISES

M/S Sunil Steel Works

M/S GEETANJALI ENTERPRISES

J.P. Enterprises

Tsmalik

Ashish Sehgal and Co.

Bhasin Construction Co