WARD 29 MOH. ADARSH NAGAR ME GOL GATE SE HARSHAVARDHAN KE MAKAN TAK VA MANOJ SE VINOD NEHARA KE MAKAN TAK HOTAMIKS SADAK VA DR HARSHAVARDHAN SE TIRANGA GALI TAK ATHAVA HANUMAN MANDIR VALI GALI ME NALI VA C.C. ROAD KA NIRMAN KARY.

Providing laying, spreading and compaction stone aggregates of 22.4-53 mm size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling wih smooth wheel roller 80-100 kn

Providing laying, dense graded bituminous macadam with higher capacity batch type HMP using grushed aggregates of specified grading, premixed with bituminous binder (VG-30) @4.5 per cent by ewight of total mix and filler

Providing and applying tackcoat with VG-10 bitumen emulsion using emulsion pressure distributor at the rate of 0.25 kg. per sqm. On the prepared bituminous/ granular surface cleaned with mechanical broom.including all type of materials, labour, tools & plants, taxe, octroi ,vat ,toll,etc.but excluding GST for proper completion of work as per direction Engineer-in-charge.

(BC Gr-II) Providing and laying bituminous concrete (Gr-II) with Higher Capacity batch type hot ,ix plant using crushed aggregates form approved quarry of specified grading, premixed with bituminous binder (VG-30) @5.40 percent of mix

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface. Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35-2015 The finished surface to be level, uniform and free from streaks and holes.

Reflective Raised Pavement Markers (Cat Eye/Road Stud) Supply and fixing of raised pavement marker with Made of Plastic body of RPM/ Road Stud shall be moulded from ASA (Acrylic Styrene Acrylonitrite) or HIPS (High-Imoact Polystyrene) or Acryloniitrite Butadien Styrene (ABS) or Any other suitable material approved by the Engineer. The Marker shall support a load of 13,635 kg tested in accordance with ASTM D4280.

R.C.C Work 1:1.5:3 in cement c.sand and 20 mm stone grit in door sills, chaukhat, boundry post etc as per si no 282(a) for Road xing

M.S. (tor steel or plain) in Plain work such as R.C.C. or R.B. work including bending for proper shape and including supply of steel & its wastage. Bend hooks, and authorised overlapping shall be measured and including cost of bindng wire.

Dismantling of Cement Concrete of 1:3:6 or Richer including disposal of the material as per direction of the Engineer in charge

Construction of granular sub base by providing well graded material spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achive desire density complete as per technical specification clause as per MORD 401