Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹92.2 LAccepted-AOC | L1 | Accepted-AOC Reasonable rate | |
| 2 | L2₹98.9 L+₹2.3 L (2.38%)Rejected-Finance | L2 | Rejected-Finance Quoted amount higher than L1 |
Tender Value
₹95 L
EMD Value
₹1.7 L
Closing Date
12 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Col NK Chaudhary
HQ 137 WKS ENGR PIN 914137 CO 99 APO
SPECIAL REPAIRS TO BLDG No P 15 P 34 OR MD ACCN AT LEIMAKHONG MIL STN
2023_MES_575833_3
8703/E8
Open Tender
Civil Works
Item Rate
270 days
Liemakhong
Please refer Tender documents.
6 documents required · 6 mandatory
₹1,000
GE 869 WES
₹1.7 L
Yes
7 Sept 2023
9 Jun 2023
19 Jul 2023
9 Jun 2023
12 Jul 2023
23 Jun 2023
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding, (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Material & Labour roughening surfaces of old concrete floor by picking, sweeping clean & washing down with water to remove dust etc and brushing neat cement slurry at the rate of 3 kg of cement per sqm complete all as specified and directed.
Material & Labour for joint free non skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) of premium quality, area of each tile exceeding 0.06 sqm but not exc 0.11sqm in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match including screed bed of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE
Material & Labour for joint free non skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) of premium quality, area of each tile exceeding 0.11 sqm but not exc 0.18sqm in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match including screed bed of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE
Material & Labour for joint free glazed ceramic coloured tiles 350 x 250 x 7 mm thick of premium quality on skirting/dado, set & jointed in neat cement slurry & pointed with white/coloured to match over and including rendering of 10mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE.
Demolition of Stone Slab laid, bedded and pointed in Cement Mortar of any thickness complete all as specified and as directed.
Material & Labour for Granite Stone Slabs of 18 to 20 mm thick of Colour Mexican Red / Ruby Red / Z Black / Pearl Black as in Floors, Treads of Steps, Window Cills, Cooking Platform etc., and the like with machine cut edges, Table rubbed and prepolished to smooth mirror finish all to required sizes, granite stone slabs shall be of design / pattern as directed, including inlays, borders, margins in two or more colours / shades, designs / patterns of stone slabs, set and bedded with grey cement [slurry] and jointed and pointed flush using polymer based cementitious tiling joint filler to match the shade of the Granite Slabs including screed bed of mortar 20 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: Single stone slab shall be used for entire Width and Length of Steps, Window Cills, Cooking Platform etc. and joints shall match with the flooring. The edges of treads shall be bull nosed / half rounded. The edges of the treads and landings shall also be provided with three Nos of grooves.
Material & Labour for machine cut Kota stone slab flooring using 20 to 25mm thick slabs, laid and jointed with grey cement slurry mixed with a admixture of pigment to match shade of slab including rubbing and polishing to smooth mirror finish all to required sizes, the size and design / pattern of slabs shall be as directed, including diagonals, inlays, borders, margins in two or more shades of slabs including screed bed of mortar 15 mm thick in Cement Mortar 1:4 complete all as specified and as directed.
Material & Labour machine cut kota stone slab as in riser of steps, skirting, dado etc. using 20 to 25mm thick slabs laid and jointed with grey cement slurry mixed with a admixture of pigment to match shade of slab including rubbing and polishing to smooth mirror finish all to required sizes, the size and design / pattern of slabs shall be as directed, including borders, margins in two or more shades of slabs over and including rendering of 10mm thick in cement mortar 1:3 complete all as specified and as directed.
Dismantling of AC sheet corrugated / CGI corrugated sheets in roofing any gauge and any thickness including ridge, valley/gutter etc.
Supply and fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified complete all as specified and as directed.
Supply and fixing pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall/ridges, fixed with self tapping screws as specified complete all as specified and as directed.
Dismantling wall /ceiling board(fibre pulp insulation) or insulation boards any thickness including cover fillets complete all as specified and directed.
Supply & Fixing 4mm thick plain E board of size 600 X 600 mm of approved texture, design and patterns, suspended on the Exposed Metal Frame Ceiling Grid of 600mm x 600mm size and applying two coats of Oil Bound Distemper over a coat of alkali resistant primer and including GI powder coated snap grid frame work of size 600 mm x 600 mm with main/ cross tee of size 24 x 38 x 0.70mm thick and wall /cleat angle of size 25 x 25 x 0.35 mm duly suspended with 4 mm dia GI wire hanger 1200 mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size complete all as specified and directed.
Taking down chowkat with shutter without taking off shutter from the frame n.exc 1.50 Sqm each complete all as specified and as directed.
Taking down chowkat with shutter without taking off shutter from the frame exc 1.50 Sqm but n.exc 4.00 Sqm each complete all as specified and as directed.
Taking down and refixing in the same opening shutters of any description exceeding 1.00 Sq.m and not exceeding 2.00 Sq.m each after easing and adjusting complete all as specified and as directed.
S & F Second Class Hard Wood, plain, solid, straight Chowkats and Frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed.
S & F Factory made, 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.
S & F Factory made, 35mm thick, Second Class Hard Wood, Glazed and Skeleton Shutters, open rebated and prepared to receive glass, gauze, etc., divided into squares, with plain, chamfered or rounded, mitred and rebated Sash Bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part – I, Section 8, Clause 8.24 [a] and fitted to Chowkats complete all as specified and as directed.
S & F Solid PVC door frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening, sizes of sections and other details as specified in SSR Part – I, Section 8, Clause 8B.3.1 complete all as specified and as directed.
S & F Factory made solid panel PVC door shutter 30 mm thick [Style] consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC "C" Channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement fixing in frame at site as per specification complete all as specified and as directed.
Material & Labour for Powder coated aluminium sections [minimum thickness of powder coating 50 micron] of approved colour as in Door, Window, Ventilator frames, Partitions with one or more rebates including jointing cleat for fixing, glazing clips, rubber beading etc complete all as specified and as directed. Note: The size of aluminium sections shall be all as specified in relevant IS code and MES Schedule Part - I.
Supply & Fixing Aluminium Powder Coated [Minimum 50 Micron thick] Sections as in Window and Ventilator Shutters, fixed type, without sash bar, Aluminium section weighing 0.55 KG / RM including necessary Joining Cleats, Glazing Clips, Neoprene Rubber Packing, Aluminium Powder Coated Snap Beading, Screws, Aluminium Powder Coated Fittings such as Peg Stays 150mm Long [1 No], Hinges, Type B-21 100mm Long [2 Nos], Suitable Handle [1 No] per Shutter complete all as specified and as directed. Note: [a] Supply & fixing of Glass / Particleboard / Gauze will be measured and paid separately. [b] Unit rate quoted shall be deemed to include for cost of rubber beading, glazing clips, neoprene packing, fittings such as Handles, Butt hinges, Tower Bolts, Stainless steel Friction Hinges.
Supply and fixing Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-Charge.?
Supply and fix 4mm thick Figured Glass ordinary quality in squares not exceeding 0.5 Sq.m, pin head type and glazing with oil putty in each pane complete all as specified and as directed.
Supply and fixing 4mm thick Figured Glass ordinary quality in squares exceeding 0.5 Sq.m, pin head type and glazing with oil putty in each pane complete all as specified and as directed.
Supply and fixing Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.
Supply and fixing in repairs Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.
Supply and fixing aluminium anodized, barrel tower bolts, 150mm long of extruded section complete all as specified and as directed.
Supply and fixing aluminium anodized, barrel tower bolts, 200mm long of extruded section complete all as specified and as directed.
Supply and fixing 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.
Supply and fixing Floor Door Stopper of size 140 mm of brass body and tongue with hard drawn steel spring complete all as specified and as directed.
Supply and fixing Aluminium alloy anodised Sliding Door Bolt with hasp and staple [Bolt Type] of size 300 mm and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.
Supply and fixing Continuous [Piano] Hinges, Mild Steel, Bright finish or Electrogalvanised and width of Flaps 30mm [When Open] complete all as specified and as directed.
Supply and fixing 40mm dia Polished Brass Cupboard Knobs fixed with nut, screw and washer complete all as specified and as directed.
Supply and fixing Magnetic Ball Catches with 8 mm dia steel ball and Brass Body and Striking Plate including letting in complete all as specified and directed.
Supply and fixing in repairs Harrison Rails [Curtain Rails], Chromium plated, 20 mm dia alongwith 02 Nos. brackets, stops, rollers etc complete all as specified and as directed.
Supply and fixing 1.25mm thick and 150 mm dia Mild steel sheet eaves gutters, galvanised class 3, half round with rounded edges complete all as specified and as directed.
Supply and fixing 18/19 mm thick, Block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on both faces fixed with screws to timber frames complete all as specified and as directed.
Supply and fixing12 mm thick, Block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on both faces fixed with screws to timber frames complete all as specified and as directed.
Supply and fixing in repairs Second Class Hard Wood, Weather boarding, clean sawn, plain, 20mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps complete all as specified and as directed.
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quions, arches, pillers etc complete all as specified and as directed.
Material and labour for brick work with sub class `B` bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.
Materials and labour for half brick thick brick work with sub class 'B' bricks straight or curved on plan to any radius built in cement mortar (1:4) complete all as specified and as directed.
Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including raking out joints, hacking for Key, scrubbing down with water etc. complete all as specified and as directed.
Material and labour for 15mm thick rendering in CM (1:4) on brick work or concrete surface as on wall mixed with integral water proofing compound @ 2% by wt of cement, finished the surface even and fair complete all as specified and directed. (Note:Water proofing compound shall be measured & paid separately)
Materials and labour for 10 mm thick rendering on other than fair faces of brick work or concrete surface as on wall in cement mortar (1:6) and finished the surfaces even and smooth without using extra cement complete all as specified and as directed.
Materials and labour for 10 mm thick rendering on brick / concrete surfaces in cement mortar (1:4) and finished the surfaces even and smooth without using extra cement complete all as specified and as directed.
Materials and labour for 5 mm thick rendering on concrete surfaces as on ceiling in cement mortar (1:3) and finished the surfaces even and smooth without using extra cement complete all as specified and as directed.
Supply only integral water proofing compound (WPC) of best quality (ISI marked on packet) complete all as specified and as directed.
Materials and labour for preparing newly plastered Wall surfaces and applying two coats of Oil Bound Distemper over a coat of alkali resistant primer on walls including rubbing with sand paper to obtain a smooth surface and making good any undulations on the Wall surfaces complete all as specified and as directed.
Materials and labour for preparing newly plastered ceiling surfaces and applying two coats of Oil Bound Distemper over a coat of alkali resistant primer on walls including rubbing with sand paper to obtain a smooth surface and making good any undulations on the ceiling surfaces complete all as specified and as directed.
Materials and labour for preparation of old plastered surfaces including brooming down or steel wire brushing and applying one coat of Oil Bound Distemper on walls complete all as specified and as directed.
Materials and labour for preparation of old plastered surfaces including brooming down or steel wire brushing and applying one coat of Oil Bound Distemper on ceiling surfaces complete all as specified and as directed.
M&L for one coat of acrylic water based exterior grade primer @0.9 ltr (undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and irected.
Material and labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm (Exterior primer shall be measured and paid separately). Notes for Serial Item No. 56 & 57: (a) The work pertaining to periodical services including removal of existing treatment shall be executed through authorized applicator of manufacturer of the materials .i.e. Paint, primer etc. proposed to be used by the contractor and approved by Garrison Engineer. (b) Cost of scafolding upto 10m hight of building is included in this item. (c) The work shall be executed by authorized reps of the approved manufacturer. The contractor shall submit the ‘Memorandum of understanding’ (MOU) with one of the approved manufacturer before placing the work order. (d) 05 years guarantee of painting work will be admissible after date of completion and 15% amount will be retained against painting work after date of completion for a period of 05 years.
Dismantling timber scantling 40 Sqcm and over in section, in any position in framed work and removing materials from site of work complete all as directed.
Material and labour for well seasoned 2nd class hard wood timber in scantlings, clean sawn, timber framed and fixed complete all as specified and as directed.
Material & Labour for Preparing surfaces of wood and wood based materials, steel and iron work new or old, of any description and girth not otherwise described, and treating with creosote complete all as specified and as directed.
Demolition of Reinforced Cement Concrete [reinforcement cut as required to facilitate demolition] of any description and in any position not otherwise specifically provided complete all as specified and as directed.
Material & Labour for RCC 1:2:4, Type B-1, using 20mm graded stone aggregate as in Slabs supported on walls, beams, columns, landings, shelves, Chajjas and the like complete all as specified and as directed.
Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick [horizontal or sloping] including fair finished surfaces complete all as specified and directed.
Material & Labour for providing precast PCC 1:3:6, Type B-1, using 20mm graded stone aggregate as in Landings, Cover Slabs [for manholes etc], Chullah Hoods, Chajjas, Water Troughs, Mangers, Shelves and similar articles with plain faces set in cement mortar 1:4 complete all as specified and as directed.
Material and labour for mild steel TMT bars 6mm to 8mm dia, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and as directed.
Material and labour for mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and as directed.
Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
M & L for providing cast-in-situ cement concrete 1:2:4, Type B1, using 20mm graded stone aggregate as in window or door Cills, lintels, bressummers, steps, quoin blocks [for use with masonry], string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders [for stone walling], corbels, brackets, etc. [of any section indicated], with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar 1:4 complete with joints to match complete all as specified and as directed.
M & L for PCC 1:4:8, Type D-2 [using 40 mm graded stone aggregate] in surface channels and drains including forming fair finished drain or channel of any inner girth using extra cement including forms, moulds, mitred / stooped ends complete all as specified and as directed.
Demolition of Unreinforced Cement Concrete in ground floors and Pavings not exceeding 15cm thick [below or above ground level] complete all as specified and as directed.
Material and labour 40mm thick plain cement concrete type B 1, 1:2:4 (20mm graded stone agg) as in flooring including necessary formwork finishing cement concrete surface even and smooth ( Without using extra cement) complete all as specified and as directed.
Material and labour for 75mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in sub base floor and finish the surface fair and even complete all as specified and as directed.
M & L for 75mm thick, PCC 1:3:6, Type C-1, using 20mm graded aggregate as in Plinth protection etc. surface finished even and smooth with out using extra cement complete all as specified and as directed.
Material and labour 25mm thick plain cement concrete type B 1, 1:2:4 (20mm graded stone agg) as in sub base finishing cement concrete surface even and fair ( Without using extra cement) complete all as specified and as directed.
M & L for Forming Contraction Joint [Dummy], 65mm deep X 10mm wide, filled with sealing compound and sealed with Sealing Compound Grade "A" for 150mm thick flooring complete all as specified and directed.
Dismantling of Mild Steel or Wrought Iron Work of any description not otherwise provided for complete all as specified and as directed.
Supply and fix Rolled Mild Steel work conforming to Fe 410-W, Grade-E- 250, Quality-A as in Roof Trusses [framed], trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing [Beam, tee, angle, channel or flat sections] including distance pieces, cleats etc complete all as specified and as directed.
S & F Mild Steel framed work conforming to Fe - 290, Grade E-165, as in Grills, Gratings, Ladders etc with ends of bars shouldered and/or riveted, or forged into spikes, framed Guard Bars, Barred Iron Doors, Ladders, framed Balusters, Walk Ways, Railings, framework of Water Tanks and similar work complete all as specified and as directed.
S & F Rolled Mild Steel work conforming to Fe -290, Grade-E- 190 as in Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc complete, drilled for fixing of steel sheeting or other covering, Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings [exclusive of steel sheeting or other covering, running rails and guides] and hanging, also fastening and fixing complete all as specified and as directed.
Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and as directed.
M & L for PCC 1:4:8, Type D-2, using 40mm graded stone aggregate as in Foundation, Fillings, Mass concrete, Footings etc complete all as specified and as directed.
Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in Soft / Loose soil complete all as specified and as directed.
Returning, filling in, of soil including spreading leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified and as directed .
Removing exvated material to a distance n.exc 50M and deposited/ spreaded where directed at a level n. exc 1.5 M above the starting point complete all as specified and as directed .
Taking up or down steel tubing 20mm bore and connections including cleaning for refixing and deposited to stores complete all as specified and directed.
Supply and fixing 20mm bore galvanised steel water tubing medium grade including all fittings and fixed complete to walls/ceiling or laid under floors complete all as specified and as direcetd.
All as per Serial Item No. 86 but except 20mm bore galvanised steel water tubing medium grade complete all as specified and as direcetd. Note: The serviceable pipes obtained from taking down vide serial No. 85 shall be re-used.
Taking up or down steel tubing 15mm bore and connections including cleaning for refixing and deposited to stores complete all as specified and directed.
Supply and fixing 15mm bore galvanised steel water tubing medium grade including all fittings and fixed complete to walls/ceiling or laid under floors complete all as specified and as direcetd.
All as per Serial Item No. 89 but except 15mm bore galvanised steel water tubing medium grade complete all as specified and as direcetd. Note: The serviceable pipes obtained from taking down vide serial No. 88 shall be re-used.
Supply and fix in repairs 15mm bore fancy type chromium plated bib taps with crutch of butterfly handle screwed down for iron pipes complete all as specified and directed.
Supply and fix in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
Supply and fix in repairs 15mm bore angle stop valve fancy type,chromium plated , screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.
Supply and fix in repairs 15mm bore stop valve fancy type,chromium plated , screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.
Supply and fix in repair pillar taps 15mm dia bore fancy type with capstain heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified directed.
Supply and fix in repairs vitreous china WHB of size 580x450mm including waste fittings, brass, chromium plated with long screwed shanks and flynuts, flange end bedded in red lead cement and other end fixed etc complete all as specified and directed.
Supply and fixing in repairs Vitreous China squatting pan of ‘Orissa pattern’, size 580 mm x 440mm (white) with ‘P’ or ‘S’ trap, front or back inlet and integral foot rests, any pattern complete including provision of PCC bedding and connection to trap, flushing pipe, antisyphonage pipe, etc. including making good the disturbed floor complete all as specified and as directed.
Supply and fixing in repairs 10 litre capacity low level PVC flushing cistern (any colour), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections complete all as specified and as directed by Engineer-in-Charge.
S & F in repairs Brass Chromium Plated Tubular Towel Rail, 20mm dia, D Type, 600 mm long between flanges complete all as specified and as directed.
S & F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.
Cutting chases, pinning in Brick Walls, making good to facings where required and pointing in Cement Mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, girth not exceeding 10cm complete all as specified and as directed. Note: Cutting chases will be carried out by using mechanical means like Groove cutter/ wall chaser.
Demolition and breaking up 150 mm dia internal dia bore drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.
M & L for concrete bed to drain pipes of size 150 mm bore packing under and haunching against the sides of pipes after they are laid and fitted in cement concrete, Type C2, 1:3:6, using 40mm graded stone aggregate complete all as specified and as directed.
S & F 150mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.
Demolition and breaking upto 110 mm dia internal dia bore drain pipes (Salt glazed ware, AC or Reinforced concrete/CI) set in cement mortar complete all as specified and directed.
M & L for concrete bed to drain pipes of size 110 mm bore packing under and haunching against the sides of pipes after they are laid and fitted in cement concrete, Type C2, 1:3:6, using 40mm graded stone aggregate complete all as specified and as directed.
S & F 110mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.
Supply and fix 75 mm bore dia PVC (SWR) pipes single socketed, in any length with rubber ring loints, fixed to walls or in floors including necessary brackets, clamps complete all as specified and as directed.
Supply and fix 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring loints, fixed to walls or in floors including necessary brackets, clamps complete all as specified and as directed.
Supply and fix 75 mm bore PVC (SWR) bends in any types complete all as specified and directed.
Supply and fix 110 mm bore PVC (SWR) bends in any types complete all as specified and directed.
S & F 75 mm bore PVC [SWR] Junction Single [Single "T"] equal or unequal with access door including jointing with solvent cement complete all as specified and as directed.
S & F 110 mm bore PVC [SWR] Junction Single [Single "T"] equal or unequal with access door including jointing with solvent cement complete all as specified and as directed.
S & F 75mm bore PVC [SWR] Floor Trap with grating including jointing with solvent cement complete all as specified and as directed.
S & F 75mm bore PVC [SWR] Nhani Trap with grating including jointing with solvent cement complete all as specified and as directed.
S & F 110mm bore PVC (SWR) couplers complete all as specified and as directed.
S & F 75mm bore PVC (SWR) couplers complete all as specified and as directed.
S & F 110mm bore PVC (SWR) reducers complete all as specified and as directed.
S & F 75mm bore PVC (SWR) reducers complete all as specified and as directed.
Cleaning of Manholes of any depth, cross section or any size in any condition [including foul condition] by opening covers and desludging, dewatering through pumping and taking out sludge deposits etc. flushing with water, removing extracted sludge to a distance exc 50mand buried by excavating a pit and covered the sludge filled with loose / soft soil of minimum 20cm thick layer on top including supply and sprinkling of bleaching powder @ 0.5Kg/Sqm complete all as directed by Engineer-in-Charge. Note: The rate quoted shall be deemed to include arrangement of pump sets with necessary tools & plants.
Cleaning the blockages in sewage lines of 100mm bore dia by rodding or by other mechanical means in between man holes and flushing with water all as directed by Engineer-in-Charge.
Cleaning the blockages in sewage lines of 150mm bore dia by rodding or by other mechanical means in between man holes and flushing with water all as directed by Engineer-in-Charge.
Material and labour for preparation of new wooden surface exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.
Material and labour for preparation of steel surface over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.
Material and labour for 15mm thick rendering in CM (1:3) in sunken floors mixed with integral water proofing compound @ 3% by wt of cement, finished the surface even and fair complete all as specified and directed. (Note:Water proofing compound shall be measured & paid separately)
Material and labour for 30 mm thick PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in sunken floor, finished the surface even and fair without using extra cement complete all as specified and directed.
Supply & fixing of 40mm dia spouts projecting atleast 20 cm clear distance from wall complete complete all as specified and as directed.
Material and labour for PCC 1:5:10 type E2, using 40 mm graded stone aggregate as in sunken floor complete all as specified and directed.
Material and labour for 20 mm thick cement plaster in CM 1:4 mixed with Water proofing Compound @ 3% and applying water proofing treatment on sunken portion with acrylic based polymer modified cementitious composite compound as approved by GE and applying cement slurry two layers i.e. 1st layer @ 0.488Kg/ Sqm mixed with composite compound @ 0.253 Kg/Sqm & 2nd layer @ 0.242Kg/ Sqm mixed with composite compound @ 0.126 Kg/Sqm and applying 200 micron polyfilm with adhesive complete all as specified and directed. Note: Minimum 4 hours gap for air curing will be maintained between 1st layer and 2nd layer.
S & F in repairs Stainless steel kitchen sink with drainage board, made of stainless steel sheet of 1 mm thick, with plugs, washers, Waste Fittings, 32 mm dia, Brass, Chromium plated, and 32mm dia PVC flexible Waste Pipe, 750 mm long, including bedding in Cement Mortar to dwarf wall or including fixing cantilever CI Brackets and connecting union to waste pipe, over all size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed.
M & L for Hardcore of gauge not exceeding 63mm of broken stones or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick watered and rammed to a true surfaces complete all as specified.
Material and labour for 50 mm thick PCC 1:2:4 type B2 (using 40 mm graded stone aggregate) as in floor, finished the surface even and smooth without using extra cement complete all as specified and directed.
Excavation in Post holes or similar holes each not exceeding 0.5 Cu.m, getting out in Hard / Dense soil, including returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm thick, watering and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and as directed.
S & F Mild Steel work confirming to Fe - 290, Grade E-165 as in Hand Rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for Balusters Running Bars, for Doors, Balusters, Nosing to Steps including embeding in concrete and screwing etc, Wind Ties for roof including securing bolts, Posts and Struts in Fencing including cutting tops to shape as directed, bending to shape, notching for wire, drilling holes or as in flat iron fillets [for securing wire mesh and barbed wire etc] including all necessary drilling, bolting or riveting, etc and similar work complete all as specified and directed.
S & F in repairs Brass Chromium Plated Shower Rose of size 125mm with or with out swivel joints fixing to steel pipes complete all as specified and as directed.
S & F 4mm Plain Mild Steel Wire, Galvanised Class 3, in Fencing including straining and fixing to Wood, Concrete or Steel Posts and/or to Straining Bolts, including securing with and provision of Galvanised Iron tying wire, Galvanised Iron Staples or Steel Pins, etc. as in detached work such as for Mosquito Nets and fixing to Straining Bolts, Hooks, Eyes, etc. complete all as specified and as directed. [Note: Each line of wire shall be measured]
Material and labour for preparation of old decorated wooden surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Material and labour for 50 mm thick sand filling under floor including watering and consolidation complete all as specified and directed. (Note: Punned thickness shall be measured for payment purpose.)
Material and labour for machine pressed precast conctete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 100 mm thickness M-50 Grade with proper jointing complete all as specified and directed.
Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, (including unscrewing from boards/out-let boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc.), removing materials off the site of work and making good disturbed surfaces of walls, floors, etc.all as directed.
Material and labour for point wiring (surface type) for one light/fan/call bell point with 1.5 sqmm PVC insulated (FR-LSH) unsheathed copper cable multistranded conductor 1100 volts grade controlled by one way switch including 1.5 sqmm PVC (FR-LSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through and including 20mm dia PVC, medium grade conduit with all accessories and PVC rectangular boxes for mounting switch, socket and fan regulator etc complete all as specified and as directed. Note: (i) Wiring shall be done in proper colour coding using red , yellow, blue for phase, black for neutral and green for earth. (ii) The cost of making good the disturbed surfaces is deemed to be included in the quoted rate.
.-Ditto- all as per item No 142.00 here-in-before but for 3 pin 6 amps switch socket outlet on the independant board with 1.5 Sqmm cable and -ditto-.
.-Ditto- all as per item No 142.00 here-in-before but for 3 pin 6 amps switch socket outlet on the same board with 1.5 Sqmm cable and -ditto-.
.-Ditto- all as per item No 142.00 here-in-before but for one 3 pin 16 Amps socket outlet on independent board with 2.5 sqmm PVC (FR-LSH) insulated un-sheathed copper conductor cable multistranded conductor 1100 volts grade and 2.5 Sqmm PVC (FR-LSH) copper conductor cable as earth continuity conductor.
Supply & fixing switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts complete all as specified & directed.
Supply and fixing socket out let 3 Pin, 6 Amps flush type complete all as specified and as directed.
Supply and fixing Socket outlet 2 in 1, 3 pin, 6 and 16 amp flush type, 230 Volts complete all as specified and as directed.
Supply & fixing switch piano flush type (ISI marked), single pole, one way 16 Amp, 240 Volts complete all as specified & directed.
Supply and fixing ceiling rose, PVC/polycarbonate, isolated body surface bakelite, 65mm x 50mm, ISI marked three terminals complete all as specified & directed.
Supply and fixing piano bell push 6 Amps, 230 volt flush type complete all as specified and as directed.
S & F Buzzer, Ding dong AC, 230 Volts, Single Pole complete all as specified and as directed.
Supply and fixing of MCB DB SPN 8 ways double door including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall including taking down of existing unserviceable DB complete all as specified and as directed.
Supply and fixing of MCCB DB VTPN 4 ways double door, for incomming MCCB and outgoing MCBs), 415 Volts, powder painted including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall including taking down of existing unserviceable DB complete all as specified and as directed.
Supply and fixing MCCB, four pole, 415 volts, Adjustable type, 100 Amps with breaking capacity 16 KA complete all as specified and as directed.
Supply and fixing of MCB 40 Amps, SPN, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed.
Supply and fixing of MCB 40 Amps, SP, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed.
Supply and fixing of MCB 6 to 32 Amps, SP, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed. Note for serial Item No. 153 to 158: MCB, MCCB and MCB DB shall be of same make as approved by GE.
S & F in repairs Surface & wall mounted Energy efficient LED Tube Light Fitting, of not less than 20 W, 5700 K of cool white, with extruded aluminium / CRCA housing and robust construction with necessary acrylic diffuser & integrated electronic driver, all accessories internally prewired and connecting up with twin core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm and making good the disturbed surfaces to match with existing complete all as specified and as directed. Note: Light fitting shall be of PF>0.95
Taking down ceiling fan carefully of any size from its original position, kept in safe custody and refixing the fan in same position or at new place including cleaning complete all as specified and directed.
Taking down exhaust fan carefully of any size from its original position, kept in safe custody and refixing the fan in same position or at new place including cleaning, complete all as specified and directed.
Supply and fixing stepped type electronic fan regulator flush type, AC 240 volt complete all as specified and as directed.
S & F Energy efficient & Long life Building Security Light Luminaire, of not less than 15 W, 5700 K with Pressure Die Cast Aluminium Housing, IP66 protection, heat resistant glass cover, high power LEDs as light source, electronic driver including GI Bracket made out of 32 mm bore GI Tube, Medium Grade of size not exceeding 1.50 m in length and bent to shape required and fixed with 2 Nos of Pole fitting Clamps made out of MS Flat of size 50 X 6mm, bolts, nuts, washers and painting with two coats of aluminium paint over a coat of primer red oxide zinc chrome primer and connecting up with three core PVC insulated, sheathed flexible copper conductor cable of size 1.5 Sq.mm including taking down existing Fluorescent tube light fittings of any description and making good the disturbed surfaces to match with existing complete all as specified and as directed. Note: Light fitting shall be of PF>0.95
Supply and laying under ground XLPE insulated PVC sheathed (Heavy duty) armoured 1100 volts grade aluminium conductor cable of size 25 Sqmm 4 core laid in trenches or fixed to wall / pole / ceiling as per IS 7098 (Part I) including connection cable glands, aluminium lugs etc complete all as specified and as directed.
M & L for surface sub main wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 10.0 sqmm (Nominal area) drawn through in and including PVC Casing/ Caping with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLS Copper conductor cable of size 10.0 sqmm as earth lead and connected to earth dolly and making good to disturbed surfaces inculding taking down the old unserviceable one all as specified as directed. Note : (i) 3 Runs of 10.00 Sqmm cable and one run of PVC Casing/ Caping shall be measured as one unit length. (ii) The cost of making good the disturbed surfaces is deemed to be included in the quoted rate.
Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised wire of 4mm dia by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe of 15mm bore (light grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (medium grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion including taking down old unserviciable earthing set all as specified and as directed. Notes:- (i) Main earthing strip from earth plate electrode to rest point upto length of 7.5 meters length shall deemed to be included in the unit rate quoted against this item. (ii) On testing after completion if the desired resistenance is not obtained the contractor shall redo the earthing without any extra cost to the department.
Manipur Steel Industries(INDIA)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .