Implementation of Jal Jeevan Mission to provide Functional Household Tap connection to Rural Households in Package no 07-JJM-I/2020-21 at Village Panchayats in Thiruchuli Panchayat Union of Virudhunagar District in Phase-I for the year 2020-21

Amount

Providing Borewell, Pumpset, Pumping Main, Distribution Line,Pump Room & FHTC at Pullanaickenpatti Village and Panchayat In Thiruchuli Block

Borewell

Charges for conducting Geophysical survey for identifying the favourable drilling point

Drilling of 6'' Dia bore well in soft rock area including trench protection charges etc., complete.Clay Soil

Drilling of 6'' Dia bore well in hard rock area including trench protection charges etc., complete.Hard Soil

Supply & delivery of 150mm Dia PVC Plain Casing pipe as per IS 12818 / 2010

Pumpset

Supply and delivery of clear water vertical wet type submersible pumpset suitable for 150mm dia borewell conforming to IS 8034/2002 as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continuos rated two pole suitable wet type vertical squirrel cage induction motor as per IS9283 /1995 as amended there after, suitable for operation in AC three phase 415 V+/- 10 %, 50 HZ +/- 5 %

50 LPM x 125 m Head

Supply and delivery of direct online starter confirming to IS13947 and IEC60947-1 suitable KW rating for operation in AC/Three Phase/50HZ(± 5%) and 415 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately).

3 Phase Panel board (5 HP)

Supply, delivery of 1.1 KV Grade,PVC insulated and sheathed 3 core flat copper submersible cable with ISI marking conforming of IS 694/1990 of reputed make for submersible motor erected in borewell.

4 sqmm submergible cable

Supply and delivery of GI medium class pipes and specials as per relevant IS as listed below.

50mm GI Pipe

50mm GI Coupling Heavy

50mm GI Elbow Heavy

50mm GI Union Heavy

50mm GI Flange set Heavy

50mm MS Clampset Heavy

50mm GM Non Return Valve

50mm GM Gate Valve

75mm x 50mm PVC Threaded Coupler

Lighting the pumpromm including internal wiring with switch circute fuses etc. with the following light fittings with ISI marking.

40W box type tube light - 1 No.

100W bulb with angle holder

100W bulk head fittings

5 AMPS 3 pin socket with switch

5 Amps switches for light(Flush type)

Providing lighting wiring using MS conduit pipes and specials with 2 runs 1.5 sqmm PVC copper wire and 1 run 12 swg GI wire for earthing for light, fans and 5A plug points etc.,

Obtaining power supply including cost of following materials and by engaging B licence holder.EB fee for application form and deposit amount will be borne by the Board

Aerial fuse board of size 15 x 10 x 6cm with 32 A aerial fuse carrier(3 Nos.)

Wall mounting type MS cubical EB meter box with fuse carrier (3 Nos) of 32 A capacity at EB supply point.This box is also to accommodate TNEB energy meter with proper ventilation as approved by TNEB.

Supply and laying of 7/20 size PVC insulator copper conductor cable from Aerial fuse to EB supply point etc., complete as per I.E Rules.

25mm dia GI pipe for service point

25mm dia GI Elbow

No.8 GI wire for earth(Twin earthing)

Stay wire 7/20

20mm GI pipe for twin earthing and cable encasing

4way nutral link

TW banel board (41 x 31 x 6cm)

Labour charges for erection of submersible pump set including fixing and jointing the submersible cable with clamps to the required depth, valves and errection panel board control room twin earthing as per I.E Rules including cost of civil works

Upto 5 HP

Main line

Earthwork excavation in all type of Soil strata for laying of pipes with the standard trench width and depth as per standard specification

Supply of unplasticised PVC rigid pipes and specials as per IS 4985 / 2000 Specification

75mm OD pvc pipes - 4 KSC

75 mm pvc bend

75 mm pvc Tee

75 mm x 50 mm PVC Threaded Coupler

Single Air valve

Supply of unplasticised GI pipes and specials as per as per IS 1239/PART II Specification FOR CULVERT/ ROAD crossing portion

65 mm GI Pipe

65 mm GI bend

65 mm GI coupling

65 mm GI Elbow

Lowering PVC rigid pipes and specials to trench and laying to proper grade and alignment, jointing with PVC couplers with cement paste including testing.

65 mm GI pipe

75mm OD pvc pipes - 4 KSC

Testing of M.S/P.V.C pipes with hydraulic testing equipmentby filling with water (including cost of water @ Rs. 60/KL)and testing to recommended pressures in convinient streches and attending the burst if any during the test,excluding cost of pipes but including other incidential and operational charges etc. complete for the following diametres of pipes

up to 100 mm P.V.C pipe

Refilling with excavated soil complying with standard specification in layers of 15cm thick well rammed and consolidated after the pipes and specials are laid and tested

Electro Chloranation Disinfection - common salt as per TWAD SOR - page no -57 clause 21.2

Distribution line

Supply of unplasticised GI pipes and specials as per as per IS 1239/PART II Specification FOR CULVERT/ ROAD crossing portion

50 mm GI Pipe

50 mm GI coupling

50 mm GI Elbow

50 mm GI Union

50 mm GI Tee

50 mm GI Hex Nipple

Conveying the GI pipes and specials to trench, Lowering GI rigid pipes and specials to trench and laying to proper grade and alignment, jointing with PVC couplers with cement paste including testing.

50 mm GI pipe

Testing of M.S/P.V.C pipes with hydraulic testing equipmentby filling with water (including cost of water @ Rs. 60/KL)and testing to recommended pressures in convinient streches and attending the burst if any during the test,excluding cost of pipes but including other incidential and operational charges etc. complete for the following diametres of pipes

up to 50 mm Gi pipe

Provision for gate value 80 mm

PUMP ROOM (1.50m x 1.50m)

Earthwork excavation and depositing on bank with initial lift of 2.00m in hard stiff clay, Stiff Black cotton soil, hard red earth, shales, Murram etc., as per SS 20 B

Collection and supply of sand and filling in to the basement including cost and conveyance to the siteand all labour charges for filling as per standard specifications

Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete

Reinforced Cement concrete 1:11/2:3 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete

Brick work in CM 1:5 mix using country bricks ground moulded of size 83/4"x41/4"x21/4" for the following including curing etc., complete complying with standard specifications. Rate for 10m3

Supplying and fabrication of steel including cost and conveyance of bending to shape and tying in position and forming grills for all R.C.C works including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing etc complete

Supplying and erecting centering shuttering including necessary supports for plane surfaces including cost and conveyance of all materials to site and all labour charges etc complete

For Lintel :

For Sunshade :

Floor finish with granolithic flooring in CC 1:2:4 mix using 10 to 12mm chips including cost and conveyance of all materials and labours etc., complete

Finishing the top of roof with one course of PRESSED TILES of size 20 cm X 20 cm X 2 cm laid in cement mortar 1:3 (One cement and three sand) 12mm thick mixed with water proofing compound conforming to I.S. at 2% by weight of cement including cost and conveyance of all materials to site and all labour charges for mixing , laying ,and finishing etc complete

Plastering with cement mortar 1:5 mix to 12mm thick including cost and conveyance of all materials to site and all labour charges etc

Plastering with cement mortar 1:3 mix to 10 mm thick including cost and conveyance of all materials to site and all labour charges etc

White distember two coats using shell lime including cost and conveyance of all materials to site and all labour charges etc comoplete for 100 Sqm

Emulsion two coats using approved colour pigments including cost and conveyance of all materials to site and all labour charges etc complete

Supplying of steel doors, windows, ventilators etc., with best approved best quality etc., complete complying with standard specifications and as directed by the departmental officers.

Doors D1 (1.00x2.00)m

Rcc Jolly 0.60 x 0.45 m

Painting two coats over new iron works using ready mixed enamel paint including cost and conveyance of paint and all labour charges etc complete

Labour charges for fixing of Steel Door including all labour charges etc. complete.

Providing FHTC

HSC Connection in DI Mains for Water Supply Scheme - Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around. (20mm)

Common Items for HSC Connection - Brass Ferrule as per IS 319 grade of sizes 15mm, 20mm and 25mm size and threaded as per IS:1554 BSPT, ISO:7-1 to suit the corresponding bore sizes of 15mm, 20mm and 25mm dia size ( 1/2", 3/4" and 1") in the saddle Connection as per IS :1554 BSPT, ISO:7-1 (15mm)

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (20mm)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes (20mm)

Poly Propylene compression Female Threaded Elbow with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes (20mm)

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes (20mm)

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRC-NSF LTD, UK (20mm)

Earthwork Excavation for 20mm PVC pipe laying work including cost of Refilling work as per Standard Specifications 20B (in Rm)

Labour Charges for Laying & Jointing 20 mm pipe in Excavated Trench in Proper Camber

Supply & Laying & Jointing 20 mm PVC Elbow (Mould) BIS 7834/1975 Part V for Tap Connection

Supply & Jointing 20 mm SS/brass tap (Local rate)

U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mm ODx1/2"ID, 25mm ODX1/2"ID and 32mm OD X 3/4" ID - 20mm

Labour charges for Drilling,Cutting and fixing ferrules in distribution line

Supply and delivery of the MS clamp and fixing in wall in open space with required screw etc

cutting MDPE Pipes and specials true axis and finishing the end complete

50mm GI Saddle piece

Cutting of old CC road for laying the 20mm pvc pipe

Providing Borewell, Pumpset, Pumping Main, Distribution Line ,Pump Room & FHTC at Bommanaickenpatti Village and Pullanaickenpatti Panchayat In Thiruchuli Block

Borewell

Charges for conducting Geophysical survey for identifying the favourable drilling point

Drilling of 6'' Dia bore well in soft rock area including trench protection charges etc., complete.Clay Soil

Drilling of 6'' Dia bore well in hard rock area including trench protection charges etc., complete.Hard Soil

Supply & delivery of 150mm Dia PVC Plain Casing pipe as per IS 12818 / 2010

Pumpset

Supply and delivery of clear water vertical wet type submersible pumpset suitable for 150mm dia borewell conforming to IS 8034/2002 as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continuos rated two pole suitable wet type vertical squirrel cage induction motor as per IS9283 /1995 as amended there after, suitable for operation in AC three phase 415 V+/- 10 %, 50 HZ +/- 5 %

50 LPM x 125 m Head

Supply and delivery of direct online starter confirming to IS13947 and IEC60947-1 suitable KW rating for operation in AC/Three Phase/50HZ(± 5%) and 415 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately).

3 Phase Panel board (5 HP)

Supply, delivery of 1.1 KV Grade,PVC insulated and sheathed 3 core flat copper submersible cable with ISI marking conforming of IS 694/1990 of reputed make for submersible motor erected in borewell.

4 sqmm submergible cable

Supply and delivery of GI medium class pipes and specials as per relevant IS as listed below.

50mm GI Pipe

50mm GI Coupling Heavy

50mm GI Elbow Heavy

50mm GI Union Heavy

50mm GI Flange set Heavy

50mm MS Clampset Heavy

50mm GM Non Return Valve

50mm GM Gate Valve

75mm x 50mm PVC Threaded Coupler

Lighting the pumpromm including internal wiring with switch circute fuses etc. with the following light fittings with ISI marking.

40W box type tube light - 1 No.

100W bulb with angle holder

100W bulk head fittings

5 AMPS 3 pin socket with switch

5 Amps switches for light(Flush type)

Providing lighting wiring using MS conduit pipes and specials with 2 runs 1.5 sqmm PVC copper wire and 1 run 12 swg GI wire for earthing for light, fans and 5A plug points etc.,

Obtaining power supply including cost of following materials and by engaging B licence holder.EB fee for application form and deposit amount will be borne by the Board

Aerial fuse board of size 15 x 10 x 6cm with 32 A aerial fuse carrier(3 Nos.)

Wall mounting type MS cubical EB meter box with fuse carrier (3 Nos) of 32 A capacity at EB supply point.This box is also to accommodate TNEB energy meter with proper ventilation as approved by TNEB.

Supply and laying of 7/20 size PVC insulator copper conductor cable from Aerial fuse to EB supply point etc., complete as per I.E Rules.

25mm dia GI pipe for service point

25mm dia GI Elbow

No.8 GI wire for earth(Twin earthing)

Stay wire 7/20

20mm GI pipe for twin earthing and cable encasing

4way nutral link

TW banel board (41 x 31 x 6cm)

Labour charges for erection of submersible pump set including fixing and jointing the submersible cable with clamps to the required depth, valves and errection panel board control room twin earthing as per I.E Rules including cost of civil works

Upto 5 HP

Main line

Earthwork excavation in all type of Soil strata for laying of pipes with the standard trench width and depth as per standard specification

Supply of unplasticised PVC rigid pipes and specials as per IS 4985 / 2000 Specification

75mm OD pvc pipes - 4 KSC

75 mm pvc bend

75 mm pvc Tee

75 mm x 50 mm PVC Threaded Coupler

Single Air valve

Supply of unplasticised GI pipes and specials as per as per IS 1239/PART II Specification FOR CULVERT/ ROAD crossing portion

65 mm GI Pipe

65 mm GI bend

65 mm GI coupling

65 mm GI Elbow

Lowering PVC rigid pipes and specials to trench and laying to proper grade and alignment, jointing with PVC couplers with cement paste including testing.

65 mm GI pipe

75mm OD pvc pipes - 4 KSC

Testing of M.S/P.V.C pipes with hydraulic testing equipmentby filling with water (including cost of water @ Rs. 60/KL)and testing to recommended pressures in convinient streches and attending the burst if any during the test,excluding cost of pipes but including other incidential and operational charges etc. complete for the following diametres of pipes

up to 100 mm P.V.C pipe

Refilling with excavated soil complying with standard specification in layers of 15cm thick well rammed and consolidated after the pipes and specials are laid and tested

Electro Chloranation Disinfection - common salt as per TWAD SOR - page no -57 clause 21.2

Distribution line

Earthwork excavation in all type of Soil strata for laying of pipes with the standard trench width and depth as per standard specification

63 mm OD PVC pipes 4ksc

Supply of unplasticised PVC rigid pipes and specials as per IS 4985 / 2000 Specification

63 mm OD PVC pipes 4ksc

63 mm pvc bend

63 mm pvc Tee

63 mm x 50 mm PVC Threaded coupler

Supply of unplasticised GI pipes and specials as per as per IS 1239/PART II Specification FOR CULVERT/ ROAD crossing portion

50 mm GI Pipe

50 mm GI coupling

50 mm GI Elbow

Conveying the PVC pipes and specials to trench, Lowering PVC rigid pipes and specials to trench and laying to proper grade and alignment, jointing with PVC couplers with cement paste including testing.

50 mm GI pipe

63 mm OD PVC pipes ksc

Testing of M.S/P.V.C pipes with hydraulic testing equipmentby filling with water (including cost of water @ Rs. 60/KL)and testing to recommended pressures in convinient streches and attending the burst if any during the test,excluding cost of pipes but including other incidential and operational charges etc. complete for the following diametres of pipes

up to 100 mm P.V.C pipe

Refilling with excavated soil complying with standard specification in layers of 15cm thick well rammed and consolidated after the pipes and specials are laid and tested

63 mm OD PVC pipes ksc

Cutting of old BT/WBM road for laying the 63mm PVC pipe

Cutting of old CC road for laying the 63mm PVC pipe

Provision for gate value 80 mm

PUMP ROOM (1.50m x 1.50m)

Earthwork excavation and depositing on bank with initial lift of 2.00m in hard stiff clay, Stiff Black cotton soil, hard red earth, shales, Murram etc., as per SS 20 B

Collection and supply of sand and filling in to the basement including cost and conveyance to the siteand all labour charges for filling as per standard specifications

Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete

Reinforced Cement concrete 1:11/2:3 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete

Brick work in CM 1:5 mix using country bricks ground moulded of size 83/4"x41/4"x21/4" for the following including curing etc., complete complying with standard specifications. Rate for 10m3

Supplying and fabrication of steel including cost and conveyance of bending to shape and tying in position and forming grills for all R.C.C works including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing etc complete

Supplying and erecting centering shuttering including necessary supports for plane surfaces including cost and conveyance of all materials to site and all labour charges etc complete

For Lintel :

For Sunshade :

Floor finish with granolithic flooring in CC 1:2:4 mix using 10 to 12mm chips including cost and conveyance of all materials and labours etc., complete

Finishing the top of roof with one course of PRESSED TILES of size 20 cm X 20 cm X 2 cm laid in cement mortar 1:3 (One cement and three sand) 12mm thick mixed with water proofing compound conforming to I.S. at 2% by weight of cement including cost and conveyance of all materials to site and all labour charges for mixing , laying ,and finishing etc complete

Plastering with cement mortar 1:5 mix to 12mm thick including cost and conveyance of all materials to site and all labour charges etc

Plastering with cement mortar 1:3 mix to 10 mm thick including cost and conveyance of all materials to site and all labour charges etc

White distember two coats using shell lime including cost and conveyance of all materials to site and all labour charges etc comoplete for 100 Sqm

Emulsion two coats using approved colour pigments including cost and conveyance of all materials to site and all labour charges etc complete

Supplying of steel doors, windows, ventilators etc., with best approved best quality etc., complete complying with standard specifications and as directed by the departmental officers.

Doors D1 (1.00x2.00)m

Rcc Jolly 0.60 x 0.45 m

Painting two coats over new iron works using ready mixed enamel paint including cost and conveyance of paint and all labour charges etc complete

Labour charges for fixing of Steel Door including all labour charges etc. complete.

Providing FHTC

HSC Connection in DI Mains for Water Supply Scheme - Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around. (20mm)

Common Items for HSC Connection - Brass Ferrule as per IS 319 grade of sizes 15mm, 20mm and 25mm size and threaded as per IS:1554 BSPT, ISO:7-1 to suit the corresponding bore sizes of 15mm, 20mm and 25mm dia size ( 1/2", 3/4" and 1") in the saddle Connection as per IS :1554 BSPT, ISO:7-1 (15mm)

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (20mm)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes (20mm)

Poly Propylene compression Female Threaded Elbow with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes (20mm)

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes (20mm)

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRC-NSF LTD, UK (20mm)

Earthwork Excavation for 20mm PVC pipe laying work including cost of Refilling work as per Standard Specifications 20B (in Rm)

Labour Charges for Laying & Jointing 20 mm pipe in Excavated Trench in Proper Camber

Supply & Laying & Jointing 20 mm PVC Elbow (Mould) BIS 7834/1975 Part V for Tap Connection

Supply & Jointing 20 mm SS/brass tap (Local rate)

U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mm ODx1/2"ID, 25mm ODX1/2"ID and 32mm OD X 3/4" ID - 20mm

Labour charges for Drilling,Cutting and fixing ferrules in distribution line

Supply and delivery of the MS clamp and fixing in wall in open space with required screw etc

cutting MDPE Pipes and specials true axis and finishing the end complete

50mm GI Saddle piece

Cutting of old CC road for laying the 20mm pvc pipe

Providing Borewell, Pumpset, Pumping Main, Distribution Line & FHTC at Savvaspuram Village and Panchayat In Thiruchuli Block

Borewell

Charges for conducting Geophysical survey for identifying the favourable drilling point

Drilling of 6'' Dia bore well in soft rock area including trench protection charges etc., complete.Clay Soil

Drilling of 6'' Dia bore well in hard rock area including trench protection charges etc., complete.Hard Soil

Supply & delivery of 150mm Dia PVC Plain Casing pipe as per IS 12818 / 2010

Pumpset

Supply and delivery of clear water vertical wet type submersible pumpset suitable for 150mm dia borewell conforming to IS 8034/2002 as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continuos rated two pole suitable wet type vertical squirrel cage induction motor as per IS9283 /1995 as amended there after, suitable for operation in AC three phase 415 V+/- 10 %, 50 HZ +/- 5 %

50 LPM x 125 m Head

Supply and delivery of direct online starter confirming to IS13947 and IEC60947-1 suitable KW rating for operation in AC/Three Phase/50HZ(± 5%) and 415 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately).

3 Phase Panel board (5 HP)

Supply, delivery of 1.1 KV Grade,PVC insulated and sheathed 3 core flat copper submersible cable with ISI marking conforming of IS 694/1990 of reputed make for submersible motor erected in borewell.

4 sqmm submergible cable

Supply & Delivery of Kisok of Size 0.75x0.45x0.75m Made up of MS Angle of Size 50mmx50mmx4mm alround covered with 16 gauge Ms Sheet and kisok door made up of MS plates of size 25mmx3mm including cutting,welding,grinding locking arrangments and labour charges etc.

Supply and delivery of GI medium class pipes and specials as per relevant IS as listed below.

50mm GI Pipe

50mm GI Coupling Heavy

50mm GI Elbow Heavy

50mm GI Union Heavy

50mm GI Flange set Heavy

50mm MS Clampset Heavy

50mm GM Non Return Valve

50mm GM Gate Valve

75mm x 50mm PVC Threaded Coupler

Obtaining power supply including cost of following materials and by engaging B licence holder.EB fee for application form and deposit amount will be borne by the Board

Aerial fuse board of size 15 x 10 x 6cm with 32 A aerial fuse carrier(3 Nos.)

Wall mounting type MS cubical EB meter box with fuse carrier (3 Nos) of 32 A capacity at EB supply point.This box is also to accommodate TNEB energy meter with proper ventilation as approved by TNEB.

Supply and laying of 7/20 size PVC insulator copper conductor cable from Aerial fuse to EB supply point etc., complete as per I.E Rules.

25mm dia GI pipe for service point

25mm dia GI Elbow

No.8 GI wire for earth(Twin earthing)

Stay wire 7/20

20mm GI pipe for twin earthing and cable encasing

4way nutral link

TW banel board (41 x 31 x 6cm)

Labour charges for erection of submersible pump set including fixing and jointing the submersible cable with clamps to the required depth, valves and errection panel board control room twin earthing as per I.E Rules including cost of civil works

Upto 5 HP

Main line

Earthwork excavation in all type of Soil strata for laying of pipes with the standard trench width and depth as per standard specification

Supply of unplasticised PVC rigid pipes and specials as per IS 4985 / 2000 Specification

75mm OD pvc pipes - 4 KSC

75 mm pvc bend

75 mm pvc Tee

75 mm x 50 mm PVC Threaded Coupler

Single Air valve

Supply of unplasticised GI pipes and specials as per as per IS 1239/PART II Specification FOR CULVERT/ ROAD crossing portion

65 mm GI Pipe

65 mm GI bend

65 mm GI coupling

65 mm GI Elbow

Lowering PVC rigid pipes and specials to trench and laying to proper grade and alignment, jointing with PVC couplers with cement paste including testing.

65 mm GI pipe

75mm OD pvc pipes - 4 KSC

Testing of M.S/P.V.C pipes with hydraulic testing equipmentby filling with water (including cost of water @ Rs. 60/KL)and testing to recommended pressures in convinient streches and attending the burst if any during the test,excluding cost of pipes but including other incidential and operational charges etc. complete for the following diametres of pipes

up to 100 mm P.V.C pipe

Refilling with excavated soil complying with standard specification in layers of 15cm thick well rammed and consolidated after the pipes and specials are laid and tested

Electro Chloranation Disinfection - common salt as per TWAD SOR - page no -57 clause 21.2

Distribution line

Earthwork excavation in all type of Soil strata for laying of pipes with the standard trench width and depth as per standard specification

63 mm OD PVC pipes 4ksc

Supply of unplasticised PVC rigid pipes and specials as per IS 4985 / 2000 Specification

63 mm OD PVC pipes 4ksc

63 mm pvc bend

63 mm pvc Tee

63 mm x 50 mm PVC Threaded coupler

Supply of unplasticised GI pipes and specials as per as per IS 1239/PART II Specification FOR CULVERT/ ROAD crossing portion

50 mm GI Pipe

50 mm GI coupling

50 mm GI Elbow

Conveying the PVC pipes and specials to trench, Lowering PVC rigid pipes and specials to trench and laying to proper grade and alignment, jointing with PVC couplers with cement paste including testing.

50 mm GI pipe

63 mm OD PVC pipes ksc

Testing of M.S/P.V.C pipes with hydraulic testing equipmentby filling with water (including cost of water @ Rs. 60/KL)and testing to recommended pressures in convinient streches and attending the burst if any during the test,excluding cost of pipes but including other incidential and operational charges etc. complete for the following diametres of pipes

up to 100 mm P.V.C pipe

Refilling with excavated soil complying with standard specification in layers of 15cm thick well rammed and consolidated after the pipes and specials are laid and tested

63 mm OD PVC pipes ksc

Cutting of old BT/WBM road for laying the 63mm PVC pipe

Cutting of old CC road for laying the 63mm PVC pipe

Provision for gate value 80 mm

Providing FHTC

HSC Connection in DI Mains for Water Supply Scheme - Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around. (20mm)

Common Items for HSC Connection - Brass Ferrule as per IS 319 grade of sizes 15mm, 20mm and 25mm size and threaded as per IS:1554 BSPT, ISO:7-1 to suit the corresponding bore sizes of 15mm, 20mm and 25mm dia size ( 1/2", 3/4" and 1") in the saddle Connection as per IS :1554 BSPT, ISO:7-1 (15mm)

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (20mm)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes (20mm)

Poly Propylene compression Female Threaded Elbow with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes (20mm)

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes (20mm)

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRC-NSF LTD, UK (20mm)

Earthwork Excavation for 20mm PVC pipe laying work including cost of Refilling work as per Standard Specifications 20B (in Rm)

Labour Charges for Laying & Jointing 20 mm pipe in Excavated Trench in Proper Camber

Supply & Laying & Jointing 20 mm PVC Elbow (Mould) BIS 7834/1975 Part V for Tap Connection

Supply & Jointing 20 mm SS/brass tap (Local rate)

U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mm ODx1/2"ID, 25mm ODX1/2"ID and 32mm OD X 3/4" ID - 20mm

Labour charges for Drilling,Cutting and fixing ferrules in distribution line

Supply and delivery of the MS clamp and fixing in wall in open space with required screw etc

cutting MDPE Pipes and specials true axis and finishing the end complete

50mm GI Saddle piece

Cutting of old CC road for laying the 20mm pvc pipe

Providing Borewell, Pumpset, Pumping Main, Distribution Line & FHTC at Savvaspuram(NORTH) Village and Panchayat In Thiruchuli Block

Distribution line

Earthwork excavation in all type of Soil strata for laying of pipes with the standard trench width and depth as per standard specification

63 mm OD PVC pipes 4ksc

Supply of unplasticised PVC rigid pipes and specials as per IS 4985 / 2000 Specification

63 mm OD PVC pipes 4ksc

63 mm pvc bend

63 mm pvc Tee

63 mm x 50 mm PVC Threaded coupler

Supply of unplasticised GI pipes and specials as per as per IS 1239/PART II Specification FOR CULVERT/ ROAD crossing portion

50 mm GI Pipe

50 mm GI coupling

50 mm GI Elbow

Conveying the PVC pipes and specials to trench, Lowering PVC rigid pipes and specials to trench and laying to proper grade and alignment, jointing with PVC couplers with cement paste including testing.

50 mm GI pipe

63 mm OD PVC pipes ksc

Testing of M.S/P.V.C pipes with hydraulic testing equipmentby filling with water (including cost of water @ Rs. 60/KL)and testing to recommended pressures in convinient streches and attending the burst if any during the test,excluding cost of pipes but including other incidential and operational charges etc. complete for the following diametres of pipes

up to 100 mm P.V.C pipe

Refilling with excavated soil complying with standard specification in layers of 15cm thick well rammed and consolidated after the pipes and specials are laid and tested

63 mm OD PVC pipes ksc

Cutting of old BT/WBM road for laying the 63mm PVC pipe

Cutting of old CC road for laying the 63mm PVC pipe

Provision for gate value 80 mm

Providing FHTC

HSC Connection in DI Mains for Water Supply Scheme - Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around. (20mm)

Common Items for HSC Connection - Brass Ferrule as per IS 319 grade of sizes 15mm, 20mm and 25mm size and threaded as per IS:1554 BSPT, ISO:7-1 to suit the corresponding bore sizes of 15mm, 20mm and 25mm dia size ( 1/2", 3/4" and 1") in the saddle Connection as per IS :1554 BSPT, ISO:7-1 (15mm)

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (20mm)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes (20mm)

Poly Propylene compression Female Threaded Elbow with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes (20mm)

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes (20mm)

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRC-NSF LTD, UK (20mm)

Earthwork Excavation for 20mm PVC pipe laying work including cost of Refilling work as per Standard Specifications 20B (in Rm)

Labour Charges for Laying & Jointing 20 mm pipe in Excavated Trench in Proper Camber

Supply & Laying & Jointing 20 mm PVC Elbow (Mould) BIS 7834/1975 Part V for Tap Connection

Supply & Jointing 20 mm SS/brass tap (Local rate)

U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mm ODx1/2"ID, 25mm ODX1/2"ID and 32mm OD X 3/4" ID - 20mm

Labour charges for Drilling,Cutting and fixing ferrules in distribution line

Supply and delivery of the MS clamp and fixing in wall in open space with required screw etc

cutting MDPE Pipes and specials true axis and finishing the end complete

50mm GI Saddle piece

Cutting of old CC road for laying the 20mm pvc pipe

Providing Borewell, Pumpset, Pumping Main, Distribution Line & FHTC at Kullampatti Village and Panchayat In Thiruchuli Block

Borewell

Charges for conducting Geophysical survey for identifying the favourable drilling point

Drilling of 6'' Dia bore well in soft rock area including trench protection charges etc., complete.Clay Soil

Drilling of 6'' Dia bore well in hard rock area including trench protection charges etc., complete.Hard Soil

Supply & delivery of 150mm Dia PVC Plain Casing pipe as per IS 12818 / 2010

Pumpset

Supply and delivery of clear water vertical wet type submersible pumpset suitable for 150mm dia borewell conforming to IS 8034/2002 as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continuos rated two pole suitable wet type vertical squirrel cage induction motor as per IS9283 /1995 as amended there after, suitable for operation in AC three phase 415 V+/- 10 %, 50 HZ +/- 5 %

50 LPM x 125 m Head

Supply and delivery of direct online starter confirming to IS13947 and IEC60947-1 suitable KW rating for operation in AC/Three Phase/50HZ(± 5%) and 415 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately).

3 Phase Panel board (5 HP)

Supply, delivery of 1.1 KV Grade,PVC insulated and sheathed 3 core flat copper submersible cable with ISI marking conforming of IS 694/1990 of reputed make for submersible motor erected in borewell.

4 sqmm submergible cable

Supply & Delivery of Kisok of Size 0.75x0.45x0.75m Made up of MS Angle of Size 50mmx50mmx4mm alround covered with 16 gauge Ms Sheet and kisok door made up of MS plates of size 25mmx3mm including cutting,welding,grinding locking arrangments and labour charges etc.

Supply and delivery of GI medium class pipes and specials as per relevant IS as listed below.

50mm GI Pipe

50mm GI Coupling Heavy

50mm GI Elbow Heavy

50mm GI Union Heavy

50mm GI Flange set Heavy

50mm MS Clampset Heavy

50mm GM Non Return Valve

50mm GM Gate Valve

75mm x 50mm PVC Threaded Coupler

Obtaining power supply including cost of following materials and by engaging B licence holder.EB fee for application form and deposit amount will be borne by the Board

Aerial fuse board of size 15 x 10 x 6cm with 32 A aerial fuse carrier(3 Nos.)

Wall mounting type MS cubical EB meter box with fuse carrier (3 Nos) of 32 A capacity at EB supply point.This box is also to accommodate TNEB energy meter with proper ventilation as approved by TNEB.

Supply and laying of 7/20 size PVC insulator copper conductor cable from Aerial fuse to EB supply point etc., complete as per I.E Rules.

25mm dia GI pipe for service point

25mm dia GI Elbow

No.8 GI wire for earth(Twin earthing)

Stay wire 7/20

20mm GI pipe for twin earthing and cable encasing

4way nutral link

TW banel board (41 x 31 x 6cm)

Labour charges for erection of submersible pump set including fixing and jointing the submersible cable with clamps to the required depth, valves and errection panel board control room twin earthing as per I.E Rules including cost of civil works

Upto 5 HP

Main line

Earthwork excavation in all type of Soil strata for laying of pipes with the standard trench width and depth as per standard specification

Supply of unplasticised PVC rigid pipes and specials as per IS 4985 / 2000 Specification

75mm OD pvc pipes - 4 KSC

75 mm pvc bend

75 mm pvc Tee

75 mm x 50 mm PVC Threaded Coupler

Single Air valve

Supply of unplasticised GI pipes and specials as per as per IS 1239/PART II Specification FOR CULVERT/ ROAD crossing portion

65 mm GI Pipe

65 mm GI bend

65 mm GI coupling

65 mm GI Elbow

Lowering PVC rigid pipes and specials to trench and laying to proper grade and alignment, jointing with PVC couplers with cement paste including testing.

65 mm GI pipe

75mm OD pvc pipes - 4 KSC

Testing of M.S/P.V.C pipes with hydraulic testing equipmentby filling with water (including cost of water @ Rs. 60/KL)and testing to recommended pressures in convinient streches and attending the burst if any during the test,excluding cost of pipes but including other incidential and operational charges etc. complete for the following diametres of pipes

up to 100 mm P.V.C pipe

Refilling with excavated soil complying with standard specification in layers of 15cm thick well rammed and consolidated after the pipes and specials are laid and tested

Electro Chloranation Disinfection - common salt as per TWAD SOR - page no -57 clause 21.2

Distribution line

Earthwork excavation in all type of Soil strata for laying of pipes with the standard trench width and depth as per standard specification

63 mm OD PVC pipes 4ksc

Supply of unplasticised PVC rigid pipes and specials as per IS 4985 / 2000 Specification

63 mm OD PVC pipes 4ksc

63 mm pvc bend

63 mm pvc Tee

63 mm x 50 mm PVC Threaded coupler

Supply of unplasticised GI pipes and specials as per as per IS 1239/PART II Specification FOR CULVERT/ ROAD crossing portion

50 mm GI Pipe

50 mm GI coupling

50 mm GI Elbow

Conveying the PVC pipes and specials to trench, Lowering PVC rigid pipes and specials to trench and laying to proper grade and alignment, jointing with PVC couplers with cement paste including testing.

50 mm GI pipe

63 mm OD PVC pipes ksc

Testing of M.S/P.V.C pipes with hydraulic testing equipmentby filling with water (including cost of water @ Rs. 60/KL)and testing to recommended pressures in convinient streches and attending the burst if any during the test,excluding cost of pipes but including other incidential and operational charges etc. complete for the following diametres of pipes

up to 100 mm P.V.C pipe

Refilling with excavated soil complying with standard specification in layers of 15cm thick well rammed and consolidated after the pipes and specials are laid and tested

63 mm OD PVC pipes ksc

Cutting of old BT/WBM road for laying the 63mm PVC pipe

Cutting of old CC road for laying the 63mm PVC pipe

Provision for gate value 80 mm

Providing FHTC

HSC Connection in DI Mains for Water Supply Scheme - Providing suitable dia non corrosive engineering plastic moulded Clamp Saddle with SS 304 threaded metal inserted for tapping outlet suiting for ½”, 3/4” &1” clear bore and with wide plastic strap (Engineering Plastic) with SS 304 suitable bolts & nuts. Saddle to have sealing of Thermo plastic elastomeric (TPE) material around. (20mm)

Common Items for HSC Connection - Brass Ferrule as per IS 319 grade of sizes 15mm, 20mm and 25mm size and threaded as per IS:1554 BSPT, ISO:7-1 to suit the corresponding bore sizes of 15mm, 20mm and 25mm dia size ( 1/2", 3/4" and 1") in the saddle Connection as per IS :1554 BSPT, ISO:7-1 (15mm)

Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK for connecting 15mm, 20mm and 25mm outlet points of Brass ferrule of sizes 15mm, 20mm and 25mm respectively. (20mm)

Poly propylene 90 Degree Compression elbow with compression joint at both ends as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes (20mm)

Poly Propylene compression Female Threaded Elbow with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes (20mm)

Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304 as per standards ISO 14236 and Tested as per BS 6920 in WRC-NSF LTD, UK suitable for 20mm, 25mm and 32mm OD MDPE pipes (20mm)

MDPE PE 80 PN16 Blue pipe as per standards ISO 4427 and Tested as per BS 6920 in WRC-NSF LTD, UK (20mm)

Earthwork Excavation for 20mm PVC pipe laying work including cost of Refilling work as per Standard Specifications 20B (in Rm)

Labour Charges for Laying & Jointing 20 mm pipe in Excavated Trench in Proper Camber

Supply & Laying & Jointing 20 mm PVC Elbow (Mould) BIS 7834/1975 Part V for Tap Connection

Supply & Jointing 20 mm SS/brass tap (Local rate)

U PVC ball valve with one side compression end and other side female end as per ISO 4422-4 and Tested as per BS 6920 in WRC-NSF LTD, UK,size : 20mm ODx1/2"ID, 25mm ODX1/2"ID and 32mm OD X 3/4" ID - 20mm

Labour charges for Drilling,Cutting and fixing ferrules in distribution line

Supply and delivery of the MS clamp and fixing in wall in open space with required screw etc

cutting MDPE Pipes and specials true axis and finishing the end complete

50mm GI Saddle piece

Cutting of old CC road for laying the 20mm pvc pipe

GST Amount for providing Service to above Government Contract Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}