Proposed Construction of Waiting Hall and Toilet Block in Girivalam Path at Arulmigu Arunachaleswarar Temple, Tiruvannamalai

Amount

Earth work excavation and desposting on banks with initial lead of 10m and initial lift of 2m in hard stiff clay, stiff black cotton soil, hard red earth, shales, murram, gravel, stony earth and earth mixed with small size boulders et., As per SS 20B excluding hard rock requiring blasting inclusive of shoring shuttering, baling ojut water where ever necessary and including refilling consolidation etc., complete in all respects complying with relevent standard specifications and as directed by departmental officers.

Providing Pre-constructional anti- termite treatment and creating a chemical barrier to the building by injecting chemical emulsion of required concentrations raft slab and beam, under Cellular raft slab, around the footings, column pits, trenches, pits, wall trenches, back fill, plinth filling, junction of wall and floor, side walls of foundation, external perimeter of building,surrounding of pipes expansion joints, etc. as per IS specification and as per the instructions of chemical manufacturer and all as directed.The treatment shall be carried out strictly in accordance with the technical specification and conforming to IS 6313 (PART-2) or equivalent BS specification.

Supplying and Filling with M - sand in foundation and others sub structures for 100mm thick and well watered, rammed and consolidated by power compacter. The rate includes the cost of M sand, compacting with mechanical compactors, labour charges for leveling, loading & Unloading and Transportation charges etc., complete and as per the standard specification.

Supplying and Filling Gravel in foundation and basement of layers not more than 15cm.thick well rammed watered and compacted -1m3 etc., complete complying with standard specification.e ) using 40 mm gauge hand broken hard broken granite stone jelly complying with standard specifications in foundations and basement.

Plain Cement Concrete 1 : 5 :10 ( one part of cement, five parts of sand and ten parts of hard broken stone ) using 40 mm gauge hand broken hard broken granite stone jelly complying with standard specifications in foundations and basement.

Supplying and Errecting Centering for sides and soffits including supports and strutting up to 3.30 m height with all cross bracing for plane surfaces as detailed below, using mild steel sheets of 90 X 60 cm 10 gauge stiffened with MS angle of 25 X 25 X 3mm for boarding, laid over adjustable span & jacks and supported by 50mm dia pipes for general pipes scaffolding systems @ a spacing of 1.20m c/c and vertical connected at a height of 2.0m c/c including 'C' & 'U' clamps and base receiver cup at bottom for connecting pipes etc and removable systems etc., the rate including cost of all materials, labour charges, wastages, placing, transportation, lead & lifts, tools & plants, fuels, fixing in position at all levels, heights, masking tape in sheet joints, consumables, etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge.

For Column footing ,Plinth /grade beam,bed blocks ,template surfaces,steps,piers,raft slab/beams and such other members

For Vertical Surfaces such as Vertical Slab, side Slabs of boxing, vertical drops, facia, vertical walls etc.

For Plane Surfaces such as Rrectangular or Square rcc Columns, Sunshades, Top and Bottom Slab of rcc boxing, etc.

For Plane surfaces such as RCC Floor Slab, Roof Slab, Beams, Lintels, bed blocks, Landing Slab, Waist Slab, Portico slabs and Beams, etc.

Providing and laying in position, Standardised Concrete Mix M-25 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cementcontent of 350 kglms and maximum water cement ratio of 0.50, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m') 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).

Foundation & Basement

Ground Floor

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Brickwork in Cement Mortar 1:5 (One cement and five sand) using III Class Country Bricks of size 9" x 4.25" x 23/4" in Foundation, Basement including curing etc. complete complying with standard specification.

Foundation & Basement

Brickwork in Cement Mortar 1:6 (One Cement and Six sand) using III Class Country Bricks of size 8.75" x 4.25" x 23/4" in Super Structure including curing etc. complete complying with standard specification.

Ground Floor

Brick partition walls of 11.50cm thickness using best quality III Class Ground Moulded Country Bricks of size 8.75" x 4.25" x 23/4" in Cement Mortar 1:3 (One Cement and Three M.SSand) and both side plastering with CM 1:5 12mm thick using hoop iron reinforcement if found necessary including curing etc.complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately).

Special Ceiling Plastering and Finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers

Plastering with Cement Mortar 1:5 for Internal walls & External walls (One cement and Five Plastering sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Ornamental Brick Work in Lime Mortar 1 : 2 mix usingClass II Ground moulded Bricks of size 8.75'' x 4.25'' x 2.75 '' all Vari Vargams , Moulds , Sthambas, Mukapatram, Koodu,Nasi and all Ornamental Brick work complete Pnchavarnam agaraies,Karnakoodus etc forming Core wall RajaGopuram/Vimanams complete including cost conveyance of all materiales and labour chargesetc complete.

Providing Vargapoochu over the Core Wall of Vimanams/Gopurams,with Lime mortar1:1.5 complete including shaping the mukhapathram,mahannasi,koodu all ornamental works to proper Shape, by embedding broken bricks or shaped /Chiselled bricks, rough -Plastering with Lime mortar 1 :1.5 and finishing with Final ORNAMENTAL plastering and Nayam theervai including cost and conveyance of all materiales labour charges therefore lifting of materiales ,all working in heights curing etc ,complete upto 25'-0'' height .etc.

Dadooing the wall with Ceramic Tiles of approved quality, colour and design joint free of size 450 x 300 x 8mm thick of approved make, in all floors over a base layer of cement mortar 1:2 (one cement: Two sand) 10mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40 kg/Sqm laid without any air gap in the tiles neatly and fixing in position as per standard specifications. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Dadooing with granite tiles of synthetic grey,paradise and similar varietes of suitsble sizes of approved make in all floors over a base layer of cement mortor 1:2 (one cement:two sand) 10mm thick and laid straightalignmentand pointed neatly and laid straight alignment andpointed neatly and fixing in position as per standared specifications .the rate includingcost of all materials ,labour charges,wasteges ,necessary lead and lifts,working at allk levels,transporatation charges,loading,unloading, the same before handing over as complete with all respects complying withrelevant standard specifications and as directed by the Engineer -in -charge.

Paving the floor with joint free Vitrified Glazed Ceramic Tiles of size 305 x 305 x 8mm for flooring approved make and quality with plain/colour with base mortor in CM 1:3, 10mm thick and pointing with white cement by adding suitable colour pigments including finishing, jointing and polishing with neat finish etc., complete. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.

Paving the floor with best approved quality fine Polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Plain Cement Concrete 1:2:4 (one cement, two crushed stone sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.

Paving the Top of Roof with Solar Refelective Tiles of size 305 x 305 x 7mm thick of approved quality and colour laid in Cement mortar 1:3 (One cement and three crushed stone sand) 12mm thick and pointed with tile grout (Nitotile Grout or equivalent) and cement in the ratio of 1:3 for joint, curing etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by the Executive Engineer before use on works)

Manufacturing supplying and fixing in position of Teracotta Jally 20 x 20 x 5cm thick approved quality and Design in Cement slurry including cost of materials labour curing lifting fixing in position etc, complete complying with standard specification and as directed by the departmental officers in all floors.

Supplying and fixing mild Steel Grills for Windows, Ventilators, etc., including priming one coat necessary fixtures complete as per drawings and specifications and as directed by the Engineer.

Door Frame: Supplying and fixing first quality teak wood frames for doors, windows, ventilators and other similar joinery works with the following sizes and sections including labour charges for wrought and put up in position and also for fixing hold fast in frames and masonry etc. complete in all floors.

Teak wood Scantings up to 2M

Teak wood Scantings over 2M and below 3M

Supply & Fixing of Single Leaf Solid Core Flush shutters with Teak ply on both side with teak wook lipping alround 35 mm thick, with necessary adhesives and CP screws complying with standard specification.The cost is inclusive of 1 No Lock arrangement, handel, tower bolt ,approved equivalent make SS ball bearing hinges of quivalent make of aproved make, 2 no floor mounted SS door stoper ect.complete as per drawing.

SLIDING DOOR :Providing & fixing sliding door using aluminium powder coated door frame and shutter sections with matt finish, party glazed with 6 mm plaing galss and partly panelled using 12 mm thick both side prelaminated particle board, fixed with fixed & sliding aluminium channels and fittings like 2 door handles, one concealed 4 lever lock, door stopper, 2 nos- 150mm long PC Aluminium tower bolts etc. all complete.

Solid PVC Door shutters Toilet door using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rebate for housing the shutter.

Supply and fixing 18 to 20mm Granite Slab for Urinal Partition and wash basin counter top with nosing on edges and anchored into the wall to a minimum depth of 75mm with necessary mortar packing including cost and conveyance of all materials and as directed by the Engineer in charge complying with standard specification.

Supplying and Paving the Paver Block Flooring using Rubber mould Paver Block (Colour) of standard size over the sand filling of 83mm thick, including laying Compacting with power machine including loading transportation and colour pigments of paver blocks, including cost and conveyance of all materials labour etc complete with standard specification.

Manufacturing, Supplying and Fixing of Stainless Steel Handrails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia SS pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between.The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding,grinding, polishing, conveyance, electrical charges, etc.complete.

Painting New Iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing Zinc chromite priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Painting New Wood work with Two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Providing and applying Emulsion Paint finish of approved make & shade in two coats over a coat of approved primer and 2 coats of patty to give an even shade as per manufacturer's instruction to the internal plastered surfaces including preparation of surfaces, scaffolding etc. all complete as per drawings and specification for all heights.

Providing and applying Emulsion Paint finish of approved make & shade in two coats over a coat of approved primer and 2 coats of patty to give an even shade as per manufacturer's instruction to the internal plastered surfaces including preparation of surfaces, scaffolding etc. all complete as per drawings and specification for all heights.

Supplying and Fixing MS Ladder width 45cm using 50 x 50 x 6 mm MS Angle.

PLUMBING WORKS

Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12 low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittingssuch as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank wiht all accessories should be got approved by the Executive Enginer before use on works)

Supplying and fixing in Position of Indian Water Closet ( Oriy Type ) of size 580 x 440mm white glazed Earthen ware of approved quality brand with 'P' or 'S' Trap confirming to BIS with crushed Stone Sand cushion and fixing around the Closet using 40mm broken brick jelly in lime Concrete 1:2:5 ( One Lime,Two Crushed Stone Sand and five brick jelly) 100 mm thick and finished the top to the slope and including giving necesary connnection to c.i soil pipe for a lemth of 600 mm) by dismantling brick masnory wall /reinforced cement concrete roof/ floor slab the dismantled portion to the major condition andwithleakeages etc., with standard specifications and asdirerctedby thedepartmental officers( the water closet should be got the by Executive enginner)

Providing and keeping in stores, shifting to the place of installation, fixing, testing and commissioning of white viterous china white color large Flat back Urinal with CP angle cock spreader flushing supported by CI/MS bracket including built in waste grating, C.P. cast brass bottle trap with extension piece, wall flanges, flush piping, complete as required and as approved by department officers (Make: Parryware or equivalent)

Supplying and fixing of 15mm CP two way Bib Cock with health faucet of parryware or equivalent make conforming to BIS specification and quality including cost of shellac, thread etc., complete complying with standard specification and including cutting and threading wherever necessary.

Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware Wash Hand Basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).

Supplying and fixing in position Indian make Bevelled edge Mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks).

Supplying & fixing of Angle valve Stop Cock with connecting hose and wall flange. (Make: Parryware or equivalent)

Supplying and fixing approved best quality brass CP Towel Rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc.,complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works).

Supplying & fixing of Stainless steel Long body Bibcock with brackets including fixing over Wall tile dado complete.(Make: Parryware or equivalent)

Supplying & fixing of Stainless steel Long body Bibcock with brackets including fixing over Wall tile dado complete.(Make: Parryware or equivalent)

PART - B SOIL AND WASTE PIPES

Supplying and fixing in position best quality PVC Soil / Waste Pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition,including testing for any leakages,etc.,complete complying with standard specifications.(The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below Stilt level.

40 mm dia

50 mm dia

75 mm dia

110 mm dia

Supplying and fixing in position cost Iron Nahini / Floor trap with Stainless steel Grating / PVC Nahini / Floor Trap with PVC Grating type of size 100 x 75 / 75 x 50 mm with best quality gratings of approved brand fixed over a bed of brick jelly lime concrete 1;2;5 (One lime two sand and five aggregate ) brick jelly 40mm and finishing with cm 1;3(One cement and three sand) including dismantling masonary wherever found necessary and making good to the original condition and giving connections to the cast iron pipe etc, complete complying with standard specififcation and as directed by the departmental Officers.

PART-C EXTERNAL DRAINAGE

Supplying and fixing in position best quality PVC Soil / Waste Pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level

75 mm dia

110 mm dia

160 mm dia

GULLY TRAP:Supplying and fixing in position 150 x 100mm "P" or "S" stoneware Gully Trap 'A' grade with CI double gratings of size 150 x 150mm and 230 x 230mm at bottom and top respectively with necessary earth work excavation laid over a bed of brick jelly cement concrete 1:3:6 (One cement, Three crushed stone sandand Six broken brick jelly) 150mm thick using 40mm size broken brick jelly including necessary brick work and plastering including dismantling masonry wherever necessary and re-doing the damaged portions to the original conditions using cement concrete 1:3:6 using 20mm stone jelly for fixing the gully trap and giving connections to stoneware sewer line etc., complete complying with standard specifications. [Earth work excavation, brick work, plastering shall be measured and paid separately]. The stoneware gully trap should be got approved by the Executive Engineer before use on works.

Construction of INSPECTION CHAMBER following clear sizes including earth work excavation, CC 1:5:10 of 10 cm thick and brick work in Cement Mortar 1:5 [One cement and Five sand] using best quality of second class Table Mould Bricks of size 9" x 43/8" x 23/4" with Plastering with Cement Mortar 1:3 [One Cement and Three Plastering Sand] 12 mm thick to inner and outer sides and wearing coat 1:3:6 [One Cement, Three crushed stone sand and Six Aggregate] 15 cm thick and covered with precast slab 5 cm thick etc., complete complying as directed by the departmental officers as per standard specification. at Clear size of 0.60m x 0.60m

INTER CONCELLED WORKS: Supplying ,laying and jointing cpvc pipes of working pressure 10kg/sqcm of approved quality and best verity conforming to BIS OF THE folloeing did including cutting threading and fixing CPVC speciels and using CPVC adhessive but excluding cost of such speciels and fixing in the wall with teak wood plugs, covc ,clamp and screws making holes on the wall or drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work /cement concrete and plastering neatly wherever necceesary with scaffolding charges etc complte complying withstandard specificaations ( CPVC pipes shall be got approved by the Executive Engineer)

20mm dia

25mm dia

32mm dia

PART F.EXTERNAL PLUMBING WORKS

Supplying ,laying and jointing cpvc pipes of working pressure 10kg/sqcm of approved quality and best verity conforming to BIS OF THE folloeing did including cutting threading and fixing CPVC speciels and using CPVC adhessive but excluding cost of such speciels and fixing in the wall with teak wood plugs, covc ,clamp and screws making holes on the wall or drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work /cement concrete and plastering neatly wherever necceesary with scaffolding charges etc complte complying withstandard specificaations ( CPVC pipes shall be got approved by the Executive Engineer)

20mm dia

25mm dia

32mm dia

40mm dia

50mm dia

Providing, supplying & laying of Gunmetal type NRV - pressure rating less tahn 16 Kg/Sqcm and IS778 with 2 Nos of MTA with jointing material like shellac, thread including testing of the joints complete and making good the walls etc. Rate is inclusive of all material labour, transportation, tools & tackles taxes, levies VAT etc all complete as per as per specifications, complete complying with standard specification and as directed by the Departmental Officer

25mm dia

32mm dia

40mm dia

50mm dia

Supplying and erection of horizontal shaft Centrifugal Mono Block Power Pump Set of Single Phase 2.00 H.P of best approved quality and make with ISI mark on suitable pedastal with foundation bolt and nut including labour supplying and fixing of starter and main switch suitable for 2.00 H.P pumpset on suitable angle iron frame work with necessary labour including panel board, supply and run off 4 of 10 Sq,mm, in P V C pipe with 14 SWG TC wire including fixing of suction pipe and foot valve up to a maximum depth of 7m and delivery pipes upto the exterior wall of pump room etc., complete and operating the pumps on trial run for 3 days. (The make and quality of pump set to be got approved by the Executive Engineer before use on works.) (TWAD- Pa no:103 Sl.no:45)200mx60m

BOREWELL

Cost of 150 mm dia PVC Casing Pipe.

150mm dia End Cap

Drilling Of Hard Rock Bore Wells including Transporation in bore well 140/150 mm dia including Cost and Conveyance Etc

Supply and Delevery of clear water Vertical Type Single Phase Submersible Pump Set 2.0 HP confirming to IS 8034 / 2002 and as amended there after and be Three StarRated capable of discharging noted LPM against Head of Water column due to all casuses .The Pump Shall be withStainless Steel Shaft anddynamically balanced with Bronze or Cast Impeller brass screws and CI FG 200 Grade Pump bowel / diffuser with ISI Mark. The Pump shall be directly coulpled to a contionues rated Two Pole suitable Wet Type required cauge induction Motorsuitable for operation in AC Single Phase 230 V etc complete. WD - M1592 20 lpm x 150 m

Supply and Delivery of 2.5 sqmm PVC insulated and PVC shearthed 3 core flat type copper cable confirming to IS 694/1990 with ISI mark.Panel board suitable for above pumpset with all accessories as per IE rules with IE Specifications etc, complete.

Supply and Delivery of 3.0m long 32 mm UPVC Column pipe specials as per WD-MOO49 with part I of 3.0m long

Supply and Delivery of 32 mm dia GI coupling heavy.

Supply and Delivery of 32 mm dia GI Elbow heavy.

Supply and Delivery of 32 mm dia Flange setwith rubber sheets, bolt and nuts.

Supply and Delivery of 32 mm dia GM Gate valves as per specification.

Supply and Delivery of 32 mm dia MS Clamp set with, bolt and nuts.

Supply and Delivery of 32 mm dia GI Hex Nipple as per specification.

Supply and Delivery of GI Pipe 25 mm dia heavy for EB service connection and tank scour.

Supply and Delivery of 20 mm dia GI Pipe heavy as per specification.

Supply and Delivery of 20 mm dia GI Coupling heavy as per specification.

Supply and Delivery of 25 mm dia GI Elbow heavy as per specification.

Supply and Delivery of 20 mm dia GI Elbow heavy as per specification.

Supply and Delivery of 20 mm dia GI Nipple heavy as per specification.

Supply and Delivery of 20 mm dia GI Tap as per specification.

Twin earthing as per IE rules including cost of 25 mm GI pipes etc, complete.

Supply and delivery of Electrical items as IS specification and as per IE rules.

Taekwood board for fixing meter and Panal board, (12" x 8" 3" )

32 Amps, 500V Poecelain fuse Unit

7/20 Copper wire

15 W LED bulb with holder.

15 Amps switch

Arial board ( 20 x 15 cm )

Labour charges for Erection of Submersible pump set in deep borewell including connection of submersible pump set with submersible cable and GI pipesand specials with all incidental chares etc, complete.

Supply & Ercetion of PVC Water Tank, the rate inclusive of labour & transportation & complete complying with standard specification and as directed by the departmental officers. (The make and brand of the PVC Tank should be got approved by Executive Engineer before use on works).

ELECTRICAL WORKS:-

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil) (Higher End )

Supply and fixing of WT bulk head fitting with guard suitable for 15 W LED Bulb

Supply and fixing of 4' 20W LED fitting with LED on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting (Higher end)

supply and fixing of 30W LED street light fitting with LED (Higher end) with 25 mm dia. GI pipe (class B) with 1 no. 25 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting .

Supply and fixing of 300mm (12") sweep (Heavy duty) AC exhaust fan complete with necessary wall opening and making good of the wall

Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust Fan

Supply and fixing of 375mm (15") sweep (Heavy duty) AC exhaust fan complete with necessary wall opening and making good of the wall

Supply and fixing of louvers shutters arrangements for 375mm (15") sweep (light duty) AC exhaust fan

Supply and fixing of 32A DP MCB with sheet steel enclosure in flush wall with earth connection (Higher end)

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End

Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32Afuseunit(500V)32A neutral link and earthlink(1"x1/8"copper flat)on TW plank of size 375mmx300mmx19mm with supporting TW reepers of 1" thick on either side with painting with suitable bolt and nuts for fixing theTWplank on wall with earth connection and interconnection with 7/20PVC insulated copper wire from EBmeter to fuse unit with 1No40Amp 30 MA Double Pole RCD / RCCB (Higher End) with suitable necessary connection

Supply and run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with suitable colour

EarthingasperPWDstandardwithanearthelectrodeof2metreClass'B'GIpipeofdianot lessthan32mmcomplete with necessary masonry work

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection

Supply and Laying of 2 core 10 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and clarnping of 2 core 10 sq.mm. PVC LTUG armoured copper cable on post or on wall with MS clamps

Supply and clarnping of 2 core 10 sq.mm. PVC LTUG armoured copper cable in suitable class B GI pipe on post or on wall with MS clamps (SD 194+ cost of 32mm dia GI pipe )

Supply and fixing of brass cable gland for 2 x 10 sq.mm. PVC armoured LTUG cable with earth connection

supply and fixing of 1200mm (48") sweep AC ceiling fan complete ( Higher end) with 2 module 100W fanstep regulator (Higher end) with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18")

A & A BUILDERS AND PROMOTERS (BID ID -1400610)

ABIRAMI ENGINEERING CONSTRUCTION AND CO (BID ID -1398503)