Supply and delivery of Cesspool tanker 6000 Liter Capacity to THARAMANGALAM Municipality.

Amount

Supply and delivery of Cesspool tanker (Suction cum Jetting Machine) 6000L-BS VI with chassis with following sepcifications:-

Features:- Vacumm Pump: Type – Rotary Sliding Vane, Cooling – Air cooled, Drive - Chassis side PTO, Tank: Tank rear door opening - Manual, Tank tipping / Angle - Not Applicable, MOC - IS:2062 Gr.B, 4-6mm thickness, Thickness of tank plate of SS 304 withproper reinforcement to withstand the required forces - 6mm, Construction - Cylindrical, shell with torispherical dished ends. Suction Hose: Dia./Length / Qty / 4”/3 mtr. / 6 Nos, Sludge Suction & Drain Valve: Size 4”, Hyd. Pump: Type - Yes-Reputed Make, Drive - Yes, Reputed make.

Capacity:- Tank: Valume – Water Storage tank – 1000 liter, Sludge Storage tank – 5000 liter, Vacuum Pump: Make Jurop / Moro / Gardener Denver Mistral / Battioni, Flow / Vacuum: 500 – 550 Cum./hr./90%, Jetting Pump: Working pressure - 150-160 bar, Hose length - 100-150m, Size - 1”dia, Water flow for pump of Jetting machine – 100 – 150 LPM, Minimum Burst pressure of Jetting Hose – 500-520 Bar, Maximum working pressure of Jetting Hose - 200-220 Bar.

Safety:- Water level indicate: Type / Qty. – Tube type / 02 Nos., Pressure relief valve – Size / Qty. – 2”/1 Nos., Vacuum relief valve – Size / Qty. 1.5”/1 Nos.

Mounting:- Chassis: Gross Vehicle Weight (GVW) – 12 TON, Emission Norms – As per Local RTO, Chassis Engine Output – Min. 90 HP, Driver’s Cabin Type – Single (Day) Cabin, Make – Ashok Leyland / Tata / Eicher / Equivalent with PTO with emission of norms BSVI, Make / Model / WB / HP / Side PTO Provision – Any other equivalent model of other chassis manufacturers, Scope - Customer, Side PTO Provision – Provision required.

Dimensions:- Equipment: Equipment Length – 4500 – 5150mm approx. Equipment Height – 1500-2200 mm approx. Overall width – 2000 – 2250mm approx. Overall height – 3000 – 3500mm approx., Equipment rear overhang – 600 – 1600mm approx.

Painting:- Surface preparation and finish: Equipments Exterior – Spray-painted with two coats of superior quality anti-corrosive primer and two coats of enamel metal paint. Colour code will be as per tender requirements. Tank’s Interior – Coated with 2 coats of superior quality anti-corrosive grey epoxy paint.