REPAIR OF ALL TYPES OF STEEL FURNITURE UNDER GE (AF) BORJHAR

Amount

Almirah Large/Medium / Small Steel, FD-67 / 104 /351/1031/ 1033,FD-114(m), FD-243 FD-1032, FD-1034

S&F in repairs legs of Almirah Large steel and providing new by welding made out of 18 gauge MS Sheet into required shape for almirah large steel, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs legs of Almirah Medium/Small steel and providing new by welding made out of 18 gauge MS Sheet into required shape for almirah medium/small steel , rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs shelves for Almirah Large steel with MS sheet CRC 1mm thick bent to shape including welding to the almirahs, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs shelves for Almirah Medium/Small steel with MS sheet CRC 1mm thick bent to shape including welding to the almirahs, rest all as shown on drg and as directed by Engr-in-Charge.

S & F in repairs locking device including replacement of brass 6 lever locks iron body with duplicate keys chromium plated to Almirah Large/Medium/Small steel/Locker bed side steel , rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs handle Chromium plated of size 150 mm grip length with both sides screwed to Almirah large/Medium/small steel , rest all as shown on drg and as directed by Engr-in-Charge.

Repairs to door of Almirah Large/medium/small steel as specified including replacement of hinges all as shown on drawing and as directed by Engr-in-charge.

Repair to existing shelf including welding.

Table Office Officer/clerk Steel, FD-84/ 1003 /381 FD-1004

S&F in repairs drawers made of 20 gauge MS Sheet duly finished with standard workmanship for Table Office Officers Steel including preparation of surface & applying two coats of synthetic enamel paint over one coat of red oxide primer to match with existing shade etc complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs drawers made of 20 gauge MS Sheet duly finished with standard workmanship for Table Office Clerk Steel including preparation of surface & applying two coats of synthetic enamel paint over a coat of red oxide primer to match with existing shade etc complete, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs top of Table office officer steel top with 18mm thick prelaminated particle board exterior grade of approved make one side teak facing and balancing white on other side all the four edges provided with 4mm thick first class teak wood beading, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs top of Table office clerk steel top with 18mm thick prelaminated particle board exterior grade of approved make one side teak facing and balancing white on other side all the four edges provided with 4mm thick first class teak wood beading, rest all as shown on drg and as directed by Engr-in-Charge.

S & F MS Lock (6 liver brass levers) with duplicate keys for drawers ofTable Office Officer/clerk Steel, rest all as shown on drg and as directed by Engr-in-Charge.

M & L for repair including welding and replacement of heavy duty spring with new as per existing locking device to make functional for smoothly play of drawers in its original position for Table Office Officer/clerk Steel, rest all as shown on drg and as directed by Engr-in-Charge.

Leg Made out of square pipe 25mm square pipe having wall thickness 1.6mm including preparation of surface & applying two coats of synthetic enamel paint over two coats of red oxide primer complete for Table Office Officer/clerk Steel, rest all as shown on drg and as directed by Engr-in-Charge.

Hard Rubber/PVC toe of superior quality as approved & as directed by Engr-in-charge.

Bed Hard Steel, FD/E6/MAP/08 (R) or similar

S&F12mm thick plywood BWR Grade, approved quality in single piece as per drawing without any joint to the bed frame with suitable screws wood/steel with cup washer including removal of damaged ply wood all as specified on drawing or as directed by Engineer-in-charge.

S&F in reapirs to head board of size 635 mm X 200 mm made from 18mm thick pre-laminated particle board exterior grade both side decorative finish shade as approved by GE complete including removal of damaged head board all as specified on drawing or as directed by Engineer-in-charge.

S&F in reapirs to foot board of size 635 mm X 300 mm made from 18mm thick pre-laminated particle board exterior grade both side decorative finish, shade as approved by GE complete including removal of damaged foot board all as specified on drawing or as directed by Engineer-in-charge.

Hard Rubber/PVC toe of superior quality as approved & as directed by Engr-in-charge.

CHARPOY GI PIPE PLY TOP, FD-220

S&F in repair 12mm thick plywood as per IS:303 BWR Grade, approved Make in single piece as per drawing without any joint to the charpoy G I pipe ply top with suitable steel nut & bolt with washer including removal of damaged ply wood all as specified on drawing or as directed by Engineer-in-charge. Make- Green ply/Century/Archid.

Reassembling/Tightening the loose components of frame including welding of broken existing MS flat iron stiffners to the long rails before fixing of ply top with frame of charpoy GI pipe ply top complete all as specified & directed by Engr-in-charge.

S&F in repair MS flat iron stiffener of size 35x5mm made in half round shape fit to long rails as per requirement including welding to long rails of charpoy GI pipe ply top duly painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed by Engr-in-charge.

S & F in repairs 32mm dia ISI medium grade of approved make, long rail for GI Chapoy pipe including removing unserviceable long rail, rest all as shown on drg and as directed by Engr-in-Charge.

Making short rail for GI Charpoy obtained from item No.1.04 above here-in-before cut in to length and threading including removing of existing unserviceable short rails all as specified and directed.

Making leg for GI charpoy from short rail obtained from item No. 1.05 above here-in-before end threading other end provided with MNF clamp suitable for 19mm dia conduit pipe 3mm base plale welded at bottom and fixed in repairs as required as per drg.

S&Fixed in repairs GI Elbow 32 mm dia three way, ISI marked, rest all as shown on drg and as directed by Engr-in-Charge.

S&Fixed in repairs GI Check nut suitable for charpoy GI, ISI marked, rest all as shown on drg and as directed by Engr-in-Charge.

Chair Revolving High back/Low Back/Med Back/ FD/E6/MAP/01 or Similar drg

S & F in repairs of maintenance free Gas lift for chair computer rest all as shown on drg and as directed by Engr-in-Charge.

S & F in repairs of Padestal assy injection moulded in black 30% glass filled nylon , 50mm MS castor pin is of press fitted to each prong for holding the castor,for chair computer rest all as shown on drg and as directed by Engr-in-Charge.

S & F in repairs of twin wheel castors for chair computer rest all as shown on drg and as directed by Engr-in-Charge.

S & F in repairs of PU seat & back duly upholstered with best quality Acrylic/polyester febric complete for chair computer rest all as shown on drg and as directed by Engr-in-Charge.

S & F in repairs of handles of chair revolving made of black integeral skin polyurethane reinforced with MS insert scratch proof complete for chair computer with arm rest all as shown on drg and as directed by Engr-in-Charge.

Chair Visitors/ Writing FD/E6/MAP/01 or Similar drg

S & F in repairs of PU seat & back duly upholstered with best quality Acrylic/polyester febric complete for chair computer rest all as shown on drg and as directed by Engr-in-Charge.

S & F in repairs of handles of chair revolving made of black integeral skin polyurethane reinforced with MS insert scratch proof complete for chair computer with arm rest all as shown on drg and as directed by Engr-in-Charge.

TABLE WITH DRAWER 900x 600 x 760mm FD-1008

Removing of existing unserviceable table top for Table with drawer 900 x 600 x 760mm and providing new table top made out of 18mm thick prelaminated particle board with teak wood facing one side and balancing white on the other side of exterior grade and 18x4 mm teak wood beading on all round, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs to unserviceable damaged legs from Table with drawer 900x600x760mm made out of 25 square pipe having wall thickness 1.6mm including preparation of surface & applying two coats of synthetic enamel paint over two coats of red oxide primer complete for Table Office Officer/clerk Steel, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repairs drawers made of 20 gauge MS Sheet duly finished with standard workmanship for Table 3x2 with drawer including preparation of surface & applying two coats of synthetic enamel paint over a coat of red oxide primer to match with existing shade etc complete, rest all as shown on drg and as directed by Engr-in-Charge.

S & F in repairs lock including replacement of brass 6 lever locks iron body with duplicate keys chromium plated to TABLE WITH DRAWER 900x 600 x 760mm FD-1008 rest all as shown on drg and as directed by Engr-in-Charge.

Hard Rubber/PVC toe of superior quality as approved & as directed by Engr-in-charge.

Chair Verandah, FD-359

Repair/replacement of broken Leg, each one piece made of MS conduit pipe 16G, 19mm dia including welding and providin one coat of red oxide primer all as per drg and as directed by Engineer-in-charge.

Welding joints of broken leg of 19/20mm MS tube & other joints as per drg

Hard rubber shoes as per drg

Painting to the entire frame including removing old unserviceable cane/plastic newar from seat & back of chair verandah and recaning the seat & back of complete chair including handles etc with approved 4mm white plastic cane as per Matt Pattern all specified on drawing or as directed by Engineer-in-charge.

Chair Steel Tubular with arms

Repairs/ replacement of seat frame made out of IInd class hard wood duly black painted and caned Godrej pattern for tubular steel chair CB with arms of overall size of seat frame 450x450mm, rest all as shown on drg and as directed by Engr-in-Charge.

Repairs/ replacement of back frame made out of IInd class hard wood duly black painted and caned Godrej pattern for tubular steel chair CB with arms of overall size of seat frame 450x380mm, rest all as shown on drg and as directed by Engr-in-Charge.

Replacement of hand rest made of second class hard wood (Godrej pattern) duly painted with black enamel paint as per existing size for tubular steel chair CBA with arms rest all as shown on drg and as directed by Engr-in-Charge.

Repair/replacement of Flat iron strips 20mm x 3mm, two in numbers in each seat and back, shall be welded to frame of chair, rest all as shown on drg and as directed by Engr-in-Charge.

Chair Steel Tubular without arms

Repairs/ replacement of seat frame made out of IInd class hard wood duly black painted and caned Godrej pattern for tubular steel chair CB without arms of overall size of seat frame 450x450mm, rest all as shown on drg and as directed by Engr-in-Charge.

Repairs/ replacement of back frame made out of IInd class hard wood duly black painted and caned Godrej pattern for tubular steel chair CB without arms of overall size of seat frame 450x380mm, rest all as shown on drg and as directed by Engr-in-Charge.

7.02 Repair/replacement of Flat iron strips 20mm x 3mm, two in numbers in each seat and back, shall be welded to frame of chair, rest all as shown on drg and as directed by Engr-in-Charge.

Locker Bed Side Steel

S&F in repair to leg made out of 18 guage MS Sheet complete including preparation of surface & applying two coats of synthetic enamel paint over a coat of red oxide primer to match with existing shade etc complete, rest all as shown on drg and as directed by Engr-in-Charge.

8.02 S&F in repair to MS butt Hinges 75mm long all as shown on Drg and as directed by Engr-in-charge

8.03 S&F in repair to Chromium plated Handle 100mm long all as shown on Drg and as directed by Engr-in-charge

8.04 S&F in repair to Chromium plated Hasp & Staple of size 75mmx40mmx3mm all as shown on Drg and as directed by Engr-in-charge

8.05 M & L for welding of broken joints of Locker Steel including preparation of surface & applying two coats of smoke gray/Olive green synthetic enamel paint over a coat of red oxide primer complete to match with existing shade, rest all as shown on drg and as directed by Engr-in-Charge.

S&F in repair to shelf made out of 18 guage MS Sheet complete including preparation of surface & applying two coats of synthetic enamel paint over a coat of red oxide primer to match with existing shade etc complete, rest all as shown on drg and as directed by Engr-in-Charge.

Teapoy Varandah

Hard Rubber/PVC toe of superior quality as approved & as directed by Engr-in-charge.

9.02 M & L for welding of broken joints of Teapoy varandah including preparation of surface and applying two coat of white synthetic enamel paint over a coat of red oxide primer complete to match the existing shade, rest all as shown on drg and as directed by Engr-in-Charge.

9.03 Replacement of existing unserviceable table top for Teapoy verandah made out of 18mm thick pre laminated particle board teak facing on top and balancing white with on the other and all the four edges provided with teak wood beading size 18x4 mm all as specified on drawing all as specified on drawing or as directed by Engineer-in-charge. directed by Engineer-in-charge.

Book Case steel

10.01 S&F pane glasses of required shape and size 3 mm thick for Book case steel complete including removal of broken pane glasses all as specified on drg and as directed by Engr-in-Charge.

10.02 Taking out of old unserviceable handle of book case steel & S&F new CP handle cast iron/zinc CP coated of Godrej pattern with new nut and bolts complete all as shown on drg and directed.

10.03 Taking out of old unserviceable locks of book case steel and S&F new locks of 40mm six lever of special type brass with new nuts and bolts key complete all as per drawing and directed.

Table Computer

(5.01) Removing of existing unserviceable table top for Table computer and S&F new table top of size 900 X 600 mm made out of 18mm thick prelaminated particle board with decorative finish one side and balancing white on the other side of exterior grade duly fixed table frame with suitable screws wood/steel with cup washer and 18x4 mm thick teak wood beading on all round, rest all as shown on drg and as directed by Engr-in-Charge.

(5.02) Removing of existing unserviceable Key Board tray from Table computer and S&F new Key Board tray of size 450 mm X 480 mm made out of 18mm thick prelaminated particle board with decorative finish one side and balancing white on the other side of exterior grade duly fixed to the existing Telescopic channel, rest all as shown on drg and as directed by Engr-in-Charge.

(5.03) Removing of existing unserviceable Mouse tray from Table computer and S&F new Mouse tray of size 380 mm X 200 mm made out of 18mm thick prelaminated particle board with decorative finish one side and balancing white on the other side of exterior grade duly fixed to the existing Telescopic channel, rest all as shown on drg and as directed by Engr-in-Charge.

(5.04) Removing of existing unserviceable damaged drawer from Table computer and S&F new drawer of size 380 mm X 200 mm 75 mm deep made out of 18mm thick prelaminated particle board with decorative finish one side and balancing white on the other side of exterior grade duly fixed to the existing Telescopic channel, rest all as shown on drg and as directed by Engr-in-Charge.

(5.05) Removing the existing unserviceable Telescopic channel from Table computer and S & F in repairs Telescopic Channel of suitable size for Key board tray/Mouse tray/Drawer of table computer and re-fixing the existing Key board tray/Mouse tray/Drawer with new telescopic channel all as specified on drawing or as directed by Engineer-in-charge.

(5.06) Removing of existing unserviceable Upper/Bottom shelf from Table computer and S&F new Upper/Bottom shelf of size 450 mm X 300 mm made out of 18mm thick prelaminated particle board with decorative finish one side and balancing white on the other side of exterior grade duly fixed to the frame of Table computer with suitable screws wood/steel with cup washer, rest all as shown on drg and as directed by Engr-in-Charge.

(5.07) Welding of broken existing Square MS pipe of Table computer duly painted with two coats of synthetic enamel paint over a coat of red oxide primer to match the existing shade complete all as specified & directed by Engr-in-charge.

(5.08) S & F in repairs Nylon buffers of legs for table computer rest all as shown on drg and as directed by Engr-in-Charge.

Charpoy with hard top

S&F in repair 12mm thick plywood as per IS:303 BWR Grade, of make (Archid /Century/Green ply) in single piece as per drawing without any joint to the charpoy MS ply top with suitable steel nut & bolt with washer including removal of damaged ply wood all as specified on drawing or as directed by Engineer-in-charge. Make- Green ply/Archid.

Welding of broken existing MS tube stiffners to the long rails before fixing of ply top with frame of charpoy MS ply top duly painted with two coats of synthetic enamel paint over a coat of red oxide primer to match the existing shadecomplete all as specified & directed by Engr-in-charge.

S&F in repair MS tube stiffener of size 25x25mm x 16 G square shape fit to long rails as per requirement including welding to long rails of charpoy MS ply top duly painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed by Engr-in-charge.

S&F in repair MS cleat of size 25x60x6mm fit to short rails as per requirement including welding to short rails of charpoy MS ply top duly painted with two coats of synthetic enamel paint over a coat of red oxide primer to match the existing shade complete all as specified & directed by Engr-in-charge.

Chair School with hand board

Opening out old unserviceable PVC seat and S&F new PVC seat suitable for chair school with hand board make : Featherlite/ Durian/Godrej of size all as per drg or as directed by Engr-in-Charge

Removing of existing unserviceable Hand board for chair school with hand board and S&F new hand board of size 600 X 300 mm made out of 18mm thick prelaminated particle board with decorative finish one side and balancing white on the other side of exterior grade duly fixed with chair frame with suitable screws wood/steel and 18x4 mm thick teak wood beading on all round, rest all as shown on drg and as directed by Engr-in-Charge.

TABLE BED SIDE (MAP Drg)

Taking out old unservicable commercial ply BWR Grade, 6 mm thick from the back of table bed side and S&F new back made of 6 mm thick commercial ply BWR Grade of make, (Archid /Century/Green ply) of the same shape and size of the existing back of table bed side all as specified and directed.

Taking out old unserviceable top of table bed side and S&F new top made of MDF board exterior grade 18/19 mm thick (Archid/Green lam/Nepal Board) of required size and shape as per existing drawing including 0.6 mm thick PVC Edging all round the top of table bed side all as specified on drg and directed.

Taking out old unserviceable side of table bed side and S&F new side made of MDF board exterior grade 18/19 mm thick (Archid/Green lam/Nepal Board) of required size and shape as per existing drawing all as specified on drg and directed.

Removing the existing unserviceable bottom of Top drawer of table bed side and providing new bottom made out of 06 mm thick commercial ply complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable sides of Top drawer of table bed side and providing new sides made out of 12 mm thick commercial ply complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable front of Top drawer of table bed side and providing new front mm wide made out of 18 mm thick MDF Board complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable bottom of Lower drawer of table bed side and providing new bottom made out of 06 mm thick commercial ply complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable sides of Lower drawer of table bed side and providing new sides made out of 12 mm thick commercial ply complete all as specified on drawing or as directed by Engineer-in-charge.

Removing the existing unserviceable front of Lower drawer of table bed side and providing new front 350made out of 18 mm thick MDF Board complete all as specified on drawing or as directed by Engineer-in-charge.

Removal of existing worn out painting from in side & outside including preparation of surface frame complete of the following steel furniture and M&L for applying two coats of 1st quality synthetic enamel paint smoke grey/Olive green over a coat of red oxide primer, rest all as shown on drg and as directed by Engr-in-Charge.

Almirah large steel 1/2 H 1/2 Self

Almirah steel large with shelves

Almirah steel medium with shelves

Chair CB steel with arms

Chair CB Steel without arms

Book Case Steel

Locker Steel

Table Office Officer steel

Table Office clerk steel

Teapoy verandah

Rack Shoe Steel

Rack Adjustable steel

M/S Kiran Chandra Das

Ms Sukumar Talukdar and Co.

Swastika Engineers and Agencies

M/s Rawat Enterprises

M/s Dimpy Enterprises

Ms N D Enterpise

KIRAN REED INDUSTRIES

M/S RUPDEEP ENTERPRISES