CAMOUFLAGE PAINTING TO BUILDING IN TECH AREA AT AF STN SURATGARH

Amount

BOQ (CAMOUFLAGE PAINTING TO BUILDING IN TECH AREA AT AF STN SURATGARH.)

M&L for preparation of old surfaces of walls/Chajja/cills including brooming down or steel wire brushing scraping down smoke soot, moulds mass and efflorescent salt and trading oil and greasy spots and applying two coats of exterior acrylic emulsion paint (antifungal) over a coat of primer, (in camouflage pattern using number of colours), complete all as specified and directed by the Engineer-in-Charge.

M&L for preparation of old surfaces of walls/Chajja/cills including brooming down or steel wire brushing scraping down smoke soot, moulds mass and efflorescent salt and trading oil and greasy spots and applying one coat of exterior acrylic emulsion paint (antifungal) over a coat of primer, (in camouflage pattern using number of colours), complete all as specified and directed by the Engineer-in-Charge. Notes for item No.1 & 2 (i) The contractor shall procure 50% quantity of exterior acrylic emulsion paint required in the work within 15 days from the date of commencment and deposit the same in the custody of Engineer-in-Charge.Engineer-in-Charge shall maintain a record of the material brought and consumed at site in the work and purchase vouchers shall be defaced and verified by the Engineer-in- Charge and same shall be submitted to GE for verification. (ii) Material shall be recorded in MB under proprietory branded material duly signed by all concerned . (iii) Pattern of camouflage shall be approved by GE.

M&L for painting steel surfaces exc 10cm width or girth with two coat of synthetic enamel paint of different colour over old painted surface approved tint including preparation of surfaces, complete all as specified and directed

All as per ser item No 3.00 above but on wooden surfaces, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins /spring clips and provding and fixing new ones, complete all as specified and directed.

S&F for 3mm thick plain sheet glass ordinary quality & glazing with oil putty in square n exc 0.50sqm in each pane, complete all as specified and directed.

S&F for figured glass, pin head type 5mm thick and glazing with beads (either supplied with shutters or to be measured separately as supply only) in squares exceeding 0.5Sqm in each pane, complete all as specified and directed.

S&F for figured glass, pin head type 5mm thick and glazing with beads (either supplied with shutters or to be measured separately as supply only) in squares not exceeding 0.5Sqm in each pane, complete all as specified and directed.

Taking down cement plaster on Brick or concrete surfaces incl racking out joints hacking for key scrubbing down with water etc, complete all as specified and directed.

M&L for rendering 5mm thick in CM 1:3 on concrete surfaces on ceiling / facia /RCC Chhaja etc & finished even & smooth without using extra cement and chicken mesh complete all as specified and directed by Engr-in-Charge.

M&L for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rough cast plaster over and including 10mm thick rendering in CM 1:4 as base coat on external surfaces of brick work finished even and fair, complete all as specified and directed.

M&L for applying two coats of exterior acrylic emulsion (weather proof treatment), in camouflaging patterns, including preparation over new plastered surfaces, complete all as specified and directed.

M&L for applying three coats of white washing on newely plastered ceiling surfaces including preparation of surfaces, complete all as specified and directed.

M&L for preparation of old surfaces of walls/ceiling including brooming down or steel wire brushing scraping down smoke soot, moulds mass and efflorescent salt and trading oil and greasy spots, complete all as specified and directed.

M&L for 1.5mm thick birla/JK wall care putty to receive smooth finishes, complete all as specified and directed.

M&L for painting of treated surfaces to receive one coat of Oil Bound distemper on surfaces of walls, complete all as specified and directed.

M&L for painting of treated surfaces to receive one coat of Oil Bound distemper on surfaces of ceiling, complete all as specified and directed.

M&L for painting of treated surfaces to recive two coat of distemper oil emulsion on surfaces of walls, complete all as specified and directed.

M&L for painting with one coat of synthetic enamel paint on plastered surfaces including preparation of old decorated surfaces of walls/kerb stone etc complete all as specified and directed by Engineer in Charge.

Contract Amount shall be derived after deducting the amount of Schedule of Credit in General Summary on serial page No 17 of tender documents.

Gill Construction Co (BID ID -3119262)

GURUJI ENTERPRISES (BID ID -3118029)

M/s JUGAL KISHORE MISHRA AND SONS (BID ID -3127597)

SHILPI CONSTRUCTION COMPANY (BID ID -3118376)

SRI SAI CONSTRUCTION COMPANY (BID ID -3118494)

M/s Shubham Enterprises (BID ID -3119017)

M/S SHRI RAM CONSTRUCTIONS (BID ID -3118880)