INTERNAL PERIODICAL AND WELCOME MAINTENANCE SERVICES REPAIR TO JOINERY PLUMBING FLOOR ROOF ETC INCLUDING E M SERVICES AT DELHI CANTT AND ANAND PARBAT AREA UNDER AGE B R II AP GE NORTH DELHI CANTT

Amount

M&L for prepration of old surfaces by Complete removal of existing treatment & levelling of wall surface using mechanical / electrical operated sanding / scraping machine within-built vaccum suction system to suck the existing treatment as retrieved by scrapping / sanding etc and applying two coats of Oil Bound Distemper over a coat of primmer by using Air-less paint primer sprayer over 3 mm thick water proofing wall care putty in two or more layer on prepared surface of wall. complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old decorated plastered or unplastered surfaces of wall and applying one coats of oil bounf distemper including preparation of old surfaces by brooming down or steel wire brushing , scraping down smoke suit , moulds, moss,efflorancr salt , trading oil and greasy spot complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of wall and applying two coats of oil bounf distemper including preparation of old surfaces by brooming down or steel wire brushing , scraping down smoke suit , moulds,filling gaps wth wall care putty, complete all as specified and directed.

M&L for preparation of old decorated previously treated surfaces of wall by brooming down scrapping down smoke and efflorescent salts etc and applying one coat of white wash on walls complete all as specified and directed by Engineer-in-charge.

M&L for preparation of old decorated previously treated surfaces of ceiling by brooming down scrapping down smoke and efflorescent etc. complete and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old decorated surfaces of any description and applying one coats of cement base paint on external wall surface complete all as specified and directed. ( Heigh of Bldg is upto 15 mtr )

M&L for one coats of synthetic enamel paint on old steel painted surfaces including preparation of surfaces of any description not otherwise descriped over 10 cm width or grith complete all as specified and directed.

M&L for one coats of synthetic enamel paint on old wooden painted surfaces including preparation of surfaces of any description not otherwise descriped over 10 cm width or grith complete all as specified and directed.

M&L for preparation of old steel wire mesh surfaces of any description and applying one coat of synthetic enamel paint over 10cm width or girth all as specified and as directed.

Cleaning of over head water tanks of capacity 1000litrs with suction pump removing all scales and finally cleaning with fresh water etc, all as specified and directed.precaution should take to avoid outlet pipe from blocking and date of cleaning should be mentioned out side tank.

Cleaning of over head water tanks of capacity 500 litrs with suction pump removing all scales and finally cleaning with fresh water etc, all as specified and directed.precaution should take to avoid outlet pipe from blocking and date of cleaning should be mentioned out side tank.

Taking down cement or cement lime plaster on brick or stone walls/ etc including raking out joints, hacking for key, scrubing down with water ,M&L for rendering 15mm thick in cement mortar (1:6) on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls/ etc including raking out joints, hacking for key, scrubing down with water M&L for rendering 15 mm thick on brick or concrete surface in cement mortar 1:4, finished even and smooth without using extra cement.complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone ceiling etc including raking out joints, hacking for key, scrubing down with water M&L for rendering 5 mm thick on ceiling concrete surface in cement mortar 1:4, finished even and smooth without using extra cement complete all as specified and directed.

M&L preparation of newly plastered surface on walls and applying two coat of Oil Bound Distemper over a coat of primer and Putty complete all as specified and directed.

M&L for preparing newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M/L for preparation of newly plastered surfaces of any description and applying two coats of cement base paint over a coat of primer all as specified and directed.

M&L for preparing newly plastered surfaces of ceilling and applying three coats of white wash complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or discription) from wooden frame or stone,concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

Supply and fixing 3mm thick ordinary sheet glass and glazing with oil putty complete in squares not exc 0.50 Sqm each pane complete all as specified and as directed.

S&F in repairs 500 ltrs capacity three layer rotational molded polyethylene water storage tanks, colour white (cylindrical vertical with closed top) hoisted of and fixed in position incuding provn of inlet , out let and over flow connection with tank connection nipple of existing pipe dia including, dismantling existing water tanks etc all as specified and directed.

S&F in repairs 500 ltrs capacity three layer rotational molded polyethylene water storage tanks, colour white (cylindrical vertical with closed top) hoisted of and fixed in position incuding provn of inlet , out let and over flow connection with tank connection nipple of existing pipe dia including, dismantling existing water tanks etc all as specified and directed.

M&L non skid ceramic tiles colored tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,in floor etc set and jointed in neat cement slurry and pointed in colour cement laid over and including 15mm thick cement mortar screed bed in CM (1:6) including dismentlingcomplete all as specified and directed.

M&L , Viterified ceramic tiles 10 mm thick square/rectangular light shade texture polished,area of each tiles Not exceeding 0.36 sqm,in floor etcb set and jointed with neat cement slurry and pointed with white cement mixed with pigment to match the colour of the tile including 15mm thick cement mortar screed bed in CM (1:6) including dismentlingcomplete all as specified and directed. complete all as specified and directed. Make :Somany ,Kajarya ,Orient

M&L , glazed ceramic coloured tiles size 450x300x7mm thick in walls etc set and jointed in neat cement slurry and pointed in colour cement laid over 10mm thick rendering in CM (1:4) including dismentling complete all as specified and directed.

M&L 15mm bore GI tubing medium grade with all fittings and fixed, including taking up or down steel water tubing and connections and removal from site 15mm bore pipe and complete to walls, ceiling or laid in floor all as specified.

S&F in repairs drapery curtain rods Mild steel powder coated polished 25 mm dia incl brackets , side stop complete all as specified and directed.

S & F in repair fancy type chromium plated long body bib taps 15mm bore with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed all as directed and specified Make : Hindware.or equvalent

S & F in repair angular stop cock, chromium plated, cast copper alloy C.P 15mm bore screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union all as directed and specified.

S&F in repairs CP brass pillar taps cast copper alloy with capstan heads,chromium plated screwed down high pressure with or without lettered hot or cold with long screwed sank and flynuts screwed for iron pipe of 15 mm bore complete all as specified and directed.Make

S& F in repair 15 mm dia Central hole basin Brass CP mixer formixing hot & cold water screwed down for iron pipe and fixed .Make Hind

S&F in repairs 15 mm wall mixer , cast copper alloy , with capstan heads, chromium plated, screwed down high pressure , with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.

S&F in repairs 15 mm Sink mixer , cast copper alloy , with capstan heads, chromium plated, screwed down high pressure , with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.

S & F in repair 20 mm dia brass CP towel rail 600mm long all as specified and directed by Engr in Charge

S&F glass corner shelf of 5.00mm thick 250mm radius with guard bar fixed to bathroom corner all as specified and directed by Engr in charge.

S & F in repairs CP health focet hygienic spray (2in 1 facucet with 1.0M long tube) complete all as specified.

S&F in repairs chromium plated jet for WC with 1.00 meter long PVC pipe including necessary fitting complete all as specified and directed.

S & F 100mm chromium plated grating round shape fixed over floor trap with coloured cement all as directed

S & F in repair vitreous china wash hand basin white flat back of size 550x400mm including cutting for and pinning in ends of brackets, PVC flexible waste pipe 32mm dia, brass chromium plated waste fittings, PVC connecting pipe and CP pillar tap etc complete all as directed and spcified.

Supply only waste fittings brass chromium plated 32mm dia for wash hand basin complete all as specified and directed.

Supply & Fix in repairs 32mm dia PVC waste pipe for WHB with union complete all as specified and directed.

Supply & Fix in repairs 15mm bore PVC connection pipe of 450mm size with 2 Nos brass check nuts with washers complete.

M&L for preparation of old decorated plastered or unplastered surfaces of wall and applying one or more coat of plastic emulsion paint including preparation of old surfaces by brooming down or steel wire brushing , scraping down smoke suit , moulds, moss,efflorancr salt , trading oil and greasy spot complete all as specified and directed.

Taking down chowkhats or frames with shutters n.exc 1.5 sqm each(without taking off shutters from the frame) and all as directed.

Ditto as per item no-30 above but exc 1.5 sqm but n.exc 4sqm each

Taking down shutters exc 1sqm but not exc 2 sqm each and all as directed.

S&F framed work as in doors or gates of angle or other section with gusset plates,rails,braces, etc.,complete drilled for fixing of steel sheeting in or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete, confirming; Fe 410-W. all as specified and directed

S & F aluminium powder coated three track window ( two shutters glazed & one shutters wire gauge) with frame, glazed with 4 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber beading joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc all as specified below :-- (a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 21447) (b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 21446) (c) Top & side Members of shutter Section shall be be of size 18.00 x 40.00 x 1.50 (Section No 21455) (d) Interlock Section of Shutter shall be be of size 18.00 x 40.00 x 1.50 (Section No 21454) (e) Bottom Members of shutter Section shall be be of size 18.00 x 40.00 x 1.50 (Section No 20844) Note:-(i) Section Number given above are of make Jindal, Contractor may use similar section of other make mention in Appx .

S&F MS square bars as in window guard bars welded to steel window frame or fixed to wooden frame all as specified and directed.

Supply and fix 35mm thick, second class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc with rails and styles including cut and mitered beards for securing wire cloth etc,all as specified and directed.

S&F 30 mm Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed.

M/L preparation of new wooden surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of primer all as directed and specified.

Material and labour preparation of new steel surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

S&F factory made solid panel PVC door shuter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails & MS frame shall be covered with heat moulded plain colour PVC `C” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement of stiles and plain colour PVC sheets for top rail,lock rail & bottom rail, on either side & as gap insert for top rail & bottom rail & panelling of plain colour PVC sheet to be fitted in the MS frame welded/Sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per complete all as specified.

S&F solid door frame 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete.all as specified and directed.

S & F 100mm medium weight stainless steel butt hinges complete all as specified

S&F aluminium anodised barrel tower bolt 200mm long extruded section all as specified.

S&F 250mm long aluminium alloy anodised sliding bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts and extruded section or cast aluminium alloy and fixed complete.

S&F 150mm size extruded aluminium handles fabricated type anodised complete all as specified.

S&Fix in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks/stainless steel wire staples all as specified.

S&F Aluminium (Die Cast) body door closer hydraulically regulated, designation No 3, universal type, suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 Kg all as directed.

M & L for 18mm Thick one side decorative lamination and other side balancing white sheet consisting of carcass 18mm thick PVC sheet fixed with approved adhesive and self tapping screws all as specified. Make :-Rajshri

M and L for 20mm wide & 1mm thick PVC EDGE BENDING to paste on Edge of PVC Furniture with suitable adhesive. Make : Rajshri

S&F Stainleless steel handle 75mm fancy type for cub board shutter complete all as specified and directed.

S&F mild steel magnetic catches and striking plate of 50mm size for kitchen cup board or wardrobe fixed with screw including letting in and fixed complete all as specified and directed .

S&F continuous piano hinges mild steel hinges bright electro galvanised width of tops 40mm (when opened) complete all as specified and directed (Make - Ashish/Elite).

Removial of old roof treament of any type /Dismantling old mud phuska with earth/sand of any depth, roof brick tiles including cement mortar bedding and removing debries out side MOD Land comlete all as specified and directed.

M&L for preparation/roughening of the plastered/unplastered roof surfaces including removal of grass, small trees and fix the APP based polymeric water proofing membrane of minimum 3mm thickness & weighing not less than 3.6kg/sqm of Make : 'Superthemolay' manufactured by M/S STP Ltd or HYPER PLAS (Poleyster) manufactured by M/S IWL ltd or SHALIPLAS (Poleyster) manufactured by M/S Capital Steels and chemicals Pvt Ltd as approved by GE, black finished reinforced with non-woven poleyster matt. With a thermofusible finish laid over hot bitumen 85/25 grade @ 1.2 Kg/Sqm over bitumenous primer at the rate of 0.40 kg/sqm, torching overlaps with a propane or a butane gas torch with a overlap of 100 mm at the sides and 150 mm at the ends and sealing applying a consistent coat of silver streak bituminous paint over APP surface all as per manufacturers instructions over and including screed bedding 15mm thick on brick/roof surfaces in cement mortar 1:4, mixed with water proofing compound as per manufactrurs instruction complete all as directed and specified

E/M Portion Taking down copper/aluminium point wiring any type (light, fan, buzzer, socket or power & AC Points) complete, including fixture and fitting such as switches, ceiling roses, pendents, regulators, sockets, holder, light fitting etc. and making good disturbed surfaces of walls, floors etc as per existing complete

M&L for point wiring concealed type with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC concealed conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories and replacement of sunk zinc coated pressed steel terminal box of 1.60mm thick with 3mm thick plastic laminated sheet top cover, brass screws, cup washers etc including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified and directed for the followings :-

(a) One light/fan point controlled by one one way switch

(b) One buzzer/bell point controlled by one one way switch

(b) One 5 Amps 3/5 pin socket outlet on same board with other switches.

(c) One 5 Amps 3/5 pin socket outlet on independent board

(d) One light point controlled by two Nos two way switches

Description all as per item no 71 above but with using 2.5 sq mm PVC insulated multi-stranded copper conductor for independent switch socket outlet 6 pin 5/15 Amps and incl 1.5 sqmm PVC insulated multi-stranded copper conductor single core as earth continuity conductor wire duly connected to all common earth point, drawn through 20 mm dia PVC conduit in any length all as directed at site.

M&L for point wiring surface type with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit/casing caping of suitable size, medium grade complete with and including all accessories and replacement of sunk zinc coated pressed steel terminal box of 1.60mm thick with 3mm thick plastic laminated sheet top cover, brass screws, cup washers etc including making good to the disturbed surfaces to match the existing complete all as specified and directed for the followings :-

(a) One light/fan point controlled by one one way switch

(b) One buzzer/bell point controlled by one one way switch

(b) One 5 Amps 3/5 pin socket outlet on same board with other switches.

(c) One 5 Amps 3/5 pin socket outlet on independent board

(d) One light point controlled by two Nos two way switches

Description all as per item no 78 above but with using 2.5 sq mm PVC insulated multi-stranded copper conductor for independent switch socket outlet 6 pin 5/15 Amps and incl 1.5 sqmm PVC insulated multi-stranded copper conductor single core as earth continuity conductor wire duly connected to all common earth point, drawn through 20 mm dia PVC conduit in any length all as directed at site.

S&F Switch piano flush type 5/6 Amps single pole one way 230 Volts complete

S&F Switch piano flush type 15/16 A single pole one way 230 Volt complete

S&F Socket Outlet 2 in 1, 3 pin 5 Amps flush type 230 Volts complete

S&F Socket Outlet 2 in 1 3/6 pin 5and15 Amp flush type 230 V complete

S&F switch piano flush type, 5/6 amps two way,SP,230 volts AC complete

S&F Bell push, flush type 5 Amps 230 Volts complete

S&F fan regulator, stepped type of 0 to 04 rotary steps, electronic, socket type, humfree, AC, 230 volts, 100 watts complete

S&F Bell Ding Dong AC, 230 Volts, Single pole complete all as specified.

S&F for lamp holder, PVC/Polycarbonate type of Normal/angular shape with back plate complete

M & L Ceiling rose, 3 terminals/phase type, fabricated of PVC/Polycarbonate, isolated body complete. Note for item No 85 to 94 :- Make : Anchor/SSK/CONA

M&L for point wiring with 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of modular metal flush box, modular white cover plate with frame, blanking plate etc suitable for Mylinc / Coral / Sleek model accessories etc and making good to the disturbed surfaces to match the existing complete all as specified and directed for one light / fan point controlled by one, one way switch 06 Amps.

All as per item No. 95 here-in-before but for Bell/Buzzer point controlled by one push button on independent board

All as per item No. 95 here-in-before but for one five pins 5 Amps switch socket outlet point on independent board

All as per item No. 95 here-in-before but for one five pins 5 Amps switch socket outlet point on same board

All as per item No. 95 here-in-before but for one light point controlled by two 2-way switches of 5 amps

All as per item No. 95 here-in-before but for 15 amps socket outlet with 2.5 Sqmm Copper incl 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly

S&F modular switch, 06 Amps, single pole, one way, 250 volts, one module and IP 20 protection complete all as specified & directed

S&F modular switch, with indicator, 16 Amps, single pole, one way, 250 volts, one module complete all as specified & directed

S&F modular switch, 06 Amps, single pole, two way, 250 volts, one module and IP 20 protection complete all as specified & directed

S&F modular bell push with indicator, 06 Amps, single pole, one way, 250 volts complete all as specified & directed

S&F modular socket outlet 05 Pin, 06 Amps, 02 module with shutter complete all as specified & directed

S&F modular socket outlet 02 in 01, 03 pin, 06 Amps and 16 Amps, 02 module with shutter complete all as specified & directed

S&F modular fan regulator, stepped type of 0 to 04 rotary steps, electronic, 02 module, humfree, AC, 230 volts, 100 watts complete Note for item No 101 to 107 :- Make of Modular switch/socket/regulator : Anchor/Crabtree/Legrand

M&L for Sub main wiring with 4 sqmm (Nominal area) with two runs of single core cable PVC insulated FRLS multistrand unsheathed copper conductor cable including 1100 V grade, drawn through Conduit including 4 sqmm (nominal area) single core PVC insulated multistrand unsheathed copper conductor as earth wire and duly connected to all common earth point all as specified and directed.

M&L for Sub main wiring with 6 sqmm (Nominal area) with two runs of single core cable PVC insulated FRLS multistrand unsheathed copper conductor cable including 1100 V grade, drawn through Conduit including 6 sqmm (nominal area) single core PVC insulated multistrand unsheathed copper conductor as earth wire and duly connected to all common earth point all as specified and directed. Note for item No 108 to 109 :- Concealed submain wiring Cutting chases, chipping and plastering measured and paid seperately under relevant item.

M & L cutting chases, chipping in, making god to facings where reuired and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc ; and cutting chases for concealed water tubing or concealed wiring etc, and making good, cutting not exc 10 cm girth in brick walls complete

S&F sheet metal enclosure with Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB with 20 Amps. Make Legrand/ L&T/Indo Asian/Havells

S&F Modular type 25 Amps capacity starter type 2 module type for AC and Geyser points with complete and remove the UNSV and all as specified. Note: Modular plate and metal flush box shall me measured and paid separately under relevant items. (Make- Legrand Cat No- 607841 or equilavent of Anchor/Crabtree)

S&F in repair of 3mm thick plastic laminated sheet cover with brass screws , cup wahser and cutting of grooves for switchs,scoket and regulator etc complete for following sizes.

S&F in replacement MCB, DP, 240 Volts, AC of breaking capacity 10 KA C curve of sizes. Make Legrand/Havells/ L&T/Hager/Indo asian

(a) 63 Amps

(b) 40 Amps

S&F in replacement MCB SP 240 Volts AC 6 - 40 Amps of breaking capacity 10 KA 'C' curve

S&F in replacement Sheet metal enclosure DB, Single pole and neutral with 200 Amps rated bus bar,230 volts, glazed, double door type, IP-43, including connecting all connections of wire to MCBs with proper lugs & arrangements, making good to the disturbed surface (Make : Legrand/ L&T/Hager/Havells)

S&F LED Batten type fitting for surface/wall mounted 20W,230V,6500K integrated electronic driver completely pre wired, LED 4 feet fitting with epoxy powder coated white polycarbonate channel housing complete with connector blok, screws , gutties etc.and removing the UNSV fitting and all as specified and directed. (Make- cat part no- Phillips cat part- BN021C LED20S PSU CW GR S2/ Wipro or equilavent make cat part no- LL20221XXX65NE3

S & F LED Batten type fitting for surface/wall mounted 9W,230V,6500K integrated electronic driver completely pre wired, LED 2 feet fitting with epoxy powder coated white polycarbonate channel housing complete with connector blok, screws , gutties etc.and removing the UNSV fitting and all as specified and directed. (Make- cat part no-Phillips cat part no- BN 021 LED10S- 6500 PSU GR S1/ Wipro or equilavent make cat part no- LL20111XXX65NE3)

S&F surface mounted LED panel type 36W, 230V, 5700K complete with driver full window glarefree opal diffuser LED panel of size 2ftx2ft with CRCA powder coated white housing complete with all accessories required for connection and making good the disturbed ceiling and remove the UNSV fittings and all as specified and directed. (Make-cat Part No- / Wipro cat part No- CRCO10R038HP57GL1 / Phillips or equilavent make Cat part no- SM365C LED32-6500 PSU OD WH)

S&F recessed type LED panel type 36W,230V,5700K complete with driver full window glarefree opal diffuser LED panel of size 2ftx2ft, suitable for exist false ceiling with CRCA powder coated white housing complete with all accessories required for connection and making good the disturbed ceiling and remove the UNSV fittings and all as specified and directed. (Make-Havells cat Part No- HERCULES 2X2PLR36W LED857S/ Wipro cat part No- CRCO10R038HP57GL1 / Phillips Cat part no- RC380B LED36S -6500 G4 L60 W60 PSU OD WH OC)

S&F Indoor Decorative wall light fixture suitable for 15 W LED lamp,230V for soft light ambiance, plastic diffuser with painted CRCA bracket, B22 lamp holder used,cylindrical shape, fixed on wall with the help of screws incl LED lamp 15W and remove the UNSV fittings and all as specified and directed. (Make- Philips/Wipro or equivallent

S&F lighting fixture wall mounted LED bulk head luminaire 10W,230V, made of die cast aluminium with opal diffuser IP 65, complete with mounting Brackets & accessories as required with connections and remove the UNSV fittings and all as specified and directed. (Make- Havells/Philips/Wipro)

S&F LED bulb 9W inverter type upto 4 hrs back up, 6500K and remove the UNSV bulb (Make- Halonix/Philips /Havells)

S&F bldg security light LED luminaries with low wattage with pressure die cast aluminium housing, with heat resistant thoughened glass & IP 65 protection and 25 Watt with suitabe size GI pipe bracket,clamps incl taking down old unserviceable one complete.(Make-Philips /Havells/Wipro)

S&F bldg security light LED luminaries with low wattage with pressure die cast aluminium housing, with heat resistant thoughened glass & IP 65 protection and 45 Watt with suitabe size GI pipe bracket,clamps incl taking down old unserviceable one complete (Make-Philips /Havells/Wipro)

S&F in passing through pipe, 10 sqmm 2 core,1100 volts grade heavy duty cable PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular incl taking down unsv complete all as specified and direcited.

M&L for earthing with Galvanised Steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanised iron wire of size 4mm dia as earthing lead (upto the body of the equipment) by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and protected by light grade 40mm dia GI pipe connected to main switch board or main control board and GI pipe medium grade 20mm bore for watering and including funnel , wire mesh , RCC pit cover and PCC chamber pit with PCC (1:3:6) type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type of soil , returning , filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical plate No 5 of SSR 1991(Part-I) complete all as directed.

M&L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or DB's/Indoor type LT PBs or any other indicated situation for loop earthing etc,4mm dia galvanised iron or steel wire all as specified and directed.

Sch of Credit- Total contract sum shall be calculated after deduction of Sch of Credit amount Credit amount - Rs.34393.00

boon construction company

M/S AADI ENTERPRISES

The new hut furnitures

sony engineering works

QUALITY CONSTRUCTIONS CO

friends associeates