ELECTRICAL WORK

Amount

Safe loading & carriage including Loading-unloading & proper stacking at a Place of following store materials from ESC Tripula to site of work.

33 KV XLPE CABLE- 3*400 sq.mm, (150 Mtr), 11 KV XLPE CABLE 300 sq.mm (150 Mtr), and 11 KV XLPE CABLE 120 sq.mm (1200 Mtr), 33kV O/D &I/D Cable Box suitable for 400 sq.mm 33 KV XLPE Cable (02 Nos), 11 kV O/D &I/D Cable Box suitable for 300 sq.mm 11 KV XLPE Cable (04 Nos), 11 kV O/D &I/D Cable Box suitable for 120 sq.mm 11 KV XLPE Cable (14 Nos),

ABC LT (3X95)+(1X70)+(1X16)sq.mm

PCC Pole 8.5 mtr Lng

ACSR Weasal conductor

Disc Fitting 45 KN (T&C)-36 Nos,

Stay wire 7/10 swg-90 kg.,

11 KV Poly Disc Insulator

Stay Clamp

Stay Set 16X1800

G.I. Wire 6 SWG

11 KV Composite Polymer Pin

11 KV F Clamp for PCC Pole

Earthing Rod 2540X20mm

T Off Channel

11 KV "V" Type X-Arm

Holding Clamp for PCC Poles

Labour & Errection Charges:-

Workk for Repair of damage/Jarjar existing of Plinth, then Cleaning and Painting of Plinth and existing Fencing, as per RESPO norms.

Repairing and Maintenance of 24 Volt Battary and Battery and Charger Set

Making sun Shead for Running cash Counter of 33/11 KV S/S Salon Dehat . All related Material provided by Contractor.

Making of Lightening Arrester, Materil provided by Contractor

Making of Structure for 33 KV Lightening Arrester

Rubber Mat for 33 KV & 11KV Pannel (19 Nos) Installed at 33/11 KV Salon Dehat, Providing by Contractor.

Maintenance of 33 KV Circuit Breaker with it's Control Pannel at 33/11 KV Sub Station Parshadepur including Control Wiring, Control Cable and relay Replacement and Comlete Work of Circuit Breaker for safe Work of Power Transformer, required materials provided by Contractor.

Maintenance of 33 KV Circuit Breaker with it's Control Pannel at 33/11 KV Sub Station Chhatoh including Control Wiring, Control Cable and relay Replacement and Comlete Work of Circuit Breaker for safe Work of Power Transformer, required materials provided by Contractor.

Digging of pits of PCC Pole 8.5 Mtr. Long from dump site to pit site then errection of PCC poles with including all related accessories as per RESPO Norms.

Grouting of PCC poles 8.5 Mtr. Long with grouting materials as per RESPO Norms.

Digging of pits, fixing & grouting of stay rods as per RESSPO norms including with grouting materials. Then after fixing and nozzling of stay wire.

Earthing of S.T/PCC. Poles as per RESSPO Norms, AS Required.

Laying of Double circuit Line of 33 KV XLPE cable in normal soil by digging of trench including supply of required material as fine sand, 1st class bricks, stone slab. Inter axial spacing between the two cable should be in between 0.25 m to 0.40m. the two cables should be separated by a partition of single bricks.

Laying of Double circuit Line of 11 KV XLPE cable in normal soil by digging of trench including supply of required material as fine sand, 1st class bricks, stone slab. Inter axial spacing between the two cable should be in between 0.25 m to 0.40m. the two cables should be separated by a partition of single bricks.

Making and Installation of 33kV O/D &I/D Cable Box suitable for 400 sq.mm 33 KV XLPE Cable

Making and Installation of 11 kV O/D &I/D Cable Box suitable for 300 sq.mm 33 KV XLPE Cable

Making and Installation of 11 kV O/D &I/D Cable Box suitable for 120 sq.mm 11 KV XLPE Cable

Work for Febrication of Fencing work of boundary wall by barbed wire at 33/11 KV S/S Chhatoh of 6 wrap on equal height R C C Pole till 6 Feet height from the Ground level. The RCC Pole gap should be maximum 10 feet from other all RCC Pole, grouting should be done from 2 feet deep to ground level with proper all grouting materials . all work will be completed in all respect in including T&P Materials consumables. All Required Materials will be provided by Contractor.

Work for Febrication of Fencing work of boundary wall by barbed wire at 33/11 KV S/S Parshadepur of 6 wrap on equal height R C C Pole till 6 Feet height from the Ground level. The RCC Pole gap should be maximum 10 feet from other all RCC Pole, grouting should be done from 2 feet deep to ground level with proper all grouting materials . all work will be completed in all respect in including T&P Materials consumables. All Required Materials will be provided by Contractor.

Stringing, Laying & sagging of 11KV Line by ACSR Weasal conductor, as per RESSPO Norms.

Stringing, Laying & sagging of Line by ABC LT (3X95)+(1X70)+(1X16)sq.mm, as per RESSPO Norms.

Work for Installation/fixing of Shackle Insulators, Material Provided by Contractor

Work for Installation/fixing of Stone Pad, Material Provided by Contractor

Work for Installation/fixing of Stay Insulators, Material Provided by Contractor

Work for Installation/fixing of P.G. Clamp, Material Provided by Contractor

Work for Installation/fixing of Danger Board with Clamp, Material Provided by Contractor

Tree Cutiing for clearance of Line

work for Guarding of G.I.Barbed wire. Material Provided by Contractor

M/S Shiv Traders

M/S SUBHASH TRADERS