Strengthening of Sewerage (Strengthening of SPS by Supply of Non Clog Pump with Allied Electrical Works in SPS Compound, Sector-55) Noida

Supply, Erection, Testing & Commissioning of Non Clog Sewage Submersible Pump Set complete in all respect as per direction of Engineer in Charge. Technical Specification of Pump Set shall be given below-

Motor Type- SQ. Cage Induction Motor 960 RPM suitable for operation on 400/440 volts, 3 phase, 50 Hz AC Supply with 'F' Class Insulation & IP-68 protection.

Pump- a) Body-Cast Iron with 2% Nickil b) Impeller-CF8M(SS316) c) Shaft-Stainless Steel d) Auto Coupling Stand-CF8M (SS316) e) Guide Pipe- Stainless Steel (SS304) @ 16 Mtr. f) Lifting Chain-alloy Steel @ 16 Mtr. g) Mechanical Seal-Upper Seal (Carbon/Crome Steel), Lower Seal (Silicon Carbide)

Field Requirement- a) Type-Non Clog Sewage Submersible Pump b) RPM- 960 c) Head- 28 Mtr. d) Copper Cable for Sewage Submersible Pump Suitable Size @ 25Mtr e) Specific Gravity of Sewage-1.07 f) Solid Handling Capacity (Dia)- Not less than 100 mm Note-Contractor shall be submitted G.T.P. & all compony test certificate of the material used in pupm set. (Make-Pullen Pump Industries Pvt. Ltd/A.s aqua Machineries Pvt. Ltd/M/s Kishor Pumps Pvt. Ltd.

Non Clog Sewage Submersible Pump Set, Discharge-432 m3/hr, Head-28 Mtr, Rating-60/80, Outlet Size of Pipe 200 mm dia, Cable-2 x 50 sqmm x 3.50 core + 1.50 sqmm x 4 core. (NSI-3.1.06)

S/F of fully Automatic Control panel Starter for 100 H.P. non clog submersible/V.T. Pump sets with following features No-volt, Under-voltage protection, Electronic Overload protection, seal monitor, reverse rotation trip device and the automatic start/stop device according to the levels in the sump. The control panels are provided with normal indications such as Digital voltmeter, Digital Ammeter and indicating lamps as per directions of E/I. (Make: Contractor-L&T (3 nos.), MCCB-L&T (1 nos.), Timer-L&T (2 nos.), VPD-Softhard/Minilec (1 nos.), MPD-Softhard/Minilec (1 nos.), WLC/Seal Moniter-Pumpcare/Kishor (1 nos.), Control Transformer & Auto Transformer-Pioneer/Electracare (1 nos.), WTR-Minilec (1 nos.), C.T.-A.E. (3 nos.), Auto/Manual switch-Salzer (1 nos.).

Design, Supply, Erection, Testing and Commissioning of MCC (Motor Control Cetre) Panel made out of 14-16 SWG, CRCA sheet, Power Coated paint after degreasing, derusting & vermin proof free standing, front operated cubical pannel board suitable for 415 Volt, 50 Hz system having One incomer of 1000 Amp ACB (Electrically and Mechanically interlocked) with incommer of of 1000 Amp. ACB for DG Set and four outgoing of 250 Amp. MCCB having 3 Nos. Aluminium bus bars of 1000 Amp capacity for three phase and One Aluminium bus bar of half capacity for netural & Six outgoing for 100 Amp MCCB for lighting and external use with Ampere meter, Current Transformer, Ampere selector switche, indicating lamps etc. Make:- ACB-L&T/Schnider/ABB, MCCB/Changeover-L&T/Schnider/ABB, Meter-L&T/A.E., Selector Switch-L&T, Current Transformer-A.E.

S/L of Al. conductor PVC insulated armoured served, sheathed cable 1100 V grade at a depth of 750 mm below ground level over a cushion of 75mm thick sand alround protected with burnt brick on sides and on top. On surface the cable run shall be fixed on MS clamps etc. of suitable size or as directed by E/I complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. (PS No.-501)

400 Sqmm 3½ core

120 Sqmm. 3½ core