Repair and renovation of PWD rest house at Diskit Nobra under Non plan.

Amount

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead With cement mortar 1:4 (1 cement : 4 fine sand)

15 mm thick plaster of mix 1:4 (1 cement : 4 fine sand)

Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.

Distempering with 1st quality acrylic distemper (ready mixed)having VOC content less than 50 gms/litre, two or more coats on new work of approved manufacturer, of required shade and colour complete as per manufacturer’s specifications

Scrapping and sand papering of paint work for door and window including preparing the surface smooth including necessary repair to scratches etc.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo / Fir wood.

Providing and fixing specified medium density board. Grade I (exterior grade) in shelves with screws and fittings wherever required, including all fittings. Flat pressed 3 layer particle board or graded wood particle board. a) 19 mm thick.

b) 6 mm thick commercial ply:-

c) 6 mm thick with teak facing on one side. Ceiling:-

French spirit polishing, Two or more coats on new works, including a coat of wood filler.

Providing and fixing sun mica of approved brand and quality fix with suitable adhesive material. Cupboard:-

Providing and fixing plain lining tongued and grooved, including wooden plugs complete with necessary screws and priming coat on unexposed surface for ceiling. Second class Deodar Wood

Providing and fixing Ist quality ceramic glazed floor tiles 300x300 conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing white vitreous china pedestal type water closet ( European type) with seat and lid, 10 litre low level white vitreous china flushing cistern and CP flush with fittings, C. I./M.S. brackets 40mm bend diameter flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. With white vitreous china flushing cistern & C. P. flush bend.

Providing and fixing wash basin with C. I brackets, 15mm C.P. brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the wall wherever required:- White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C. P. brass single hole basin mixer.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing Stainless Steel A lSI 304 (18/ 8) kitchen sink as per I.S. 13983 with C.l. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required: 610x460mm bowl depth 200mm

Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fittings complete. Flexible pipe 32 mm dia.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic molded frame of approved make and shade with 6 mm Thick hard board backing. Rectangular shape 453x357 mm

Providing and fixing toilet paper holder. C.P. brass.

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour: Waste coupling 31 mm of 79 mm length and 62 mm breadth weighing not less than 45 gms.

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge. Internal work Concealed fixing the pipe with clamps at 1.0 meter spacing including cutting chases and making good the wall including all joints, tee, elbow, union reducer etc complete. PN-16 pipe , 20 mm OD(SDR-7.4)

Providing and fixing M.S grating of approved quality. Circular type. 100 mm nominal dia.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931

Providing and fixing 8 mm dia C.P /S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C of quality and make as approved by Engineer – in – charge.

Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge, including all joints, Tee, bends etc. 75 mm nominal outer dia pipes.

Constructing soak pit 1.20x1.20x1.20m filled with stone including S.W. drain pipe 100 mm diameter and 1.20m long complete as per standard design including cutting of earth etc. complete job.

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931.

Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete.

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge.

Providing and fixing 85x42mm chromium plated brass pull bolt lock with necessary C.P. brass screws, nuts, bolts and washers etc. complete.

Renewing glass panes, with wooden fillets wherever necessary Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm).

Providing and fixing magnetic catcher of approved quality in cupboard/ward robe shutters including fixing with necessary screws etc. complete. Double strip (Horizontal type)

Providing and fixing chromium plated brass handles with necessary screws etc. Complete 100 mm

Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer board ISI marked IS: 14842-2000, including top cover of 6mm coir veneer board, nickel plated M.S. pipe 20 mm dia (heavy type) curtain rod with nickel plated brackets including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with hollock wood cleats of size 100mm x 40mmx40 mm on both inner side of pelmet and rawl plugs 75mm long etc. all complete.

Providing and fixing aluminum die cast body tubular type universal hydraulic door closer (having brand logo with IS: 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete :

Providing M.S. Piano hinges ISI marked IS: 3818 finished with nickel plating and fixing with necessary screws etc., complete. Overall width 35 mm

Dismantling of ceramic tile work on wall including disposal of unserviceable material/mulba upto 100 Mtr.

Providing and fixing CP Brass single lever telephonic wall mixer of quality and make as approved by Engineer – in – charge.

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet. 150 mm diameter

Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screw. 600 mm long towel rail with length of 645 m, 78 mm wide and effective height of 88 mm.

Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets 25 mm dia. (heavy type).

Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete: 40 mm.

Providing and fixing powder coated telescopic drawer channels 300mm long with necessary screws etc. complete as per directions of engineer-in-charge.

Providing and fixing wooden moulded beading to door, window and cupboard frames with iron screws, plugs and priming coat on unexposed surface etc. complete: 2nd class kail wood. 19 x 8 mm

Providing and applying vinyal PVC wall sticker self adhesive including all required accessories complete.

Providing and fixing water heater (gyeser) of approved brand and quality.

Carriage of material by machanical transport from source to site of work including loading unloading complete job Sand and aggregate avg. lead of 12.0 Km.