Providing GI sheet Roof shed and Toilet for SI ward Office in the exisitng OHT tank room at VOC colony in ward no.98, South Zone

Amount

Clearing the Site Using JCB etc. complete as per direction of departmental officers

Earth work excavating and depositing on bank with initial lead of 10 m & initial lift of 2m in Hard stiff clay, stiff black cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders SS.20B (ScH.No.62) (P.No.22)

Conveyance of Surplus earth from work site to City outer with average lead of 15 km etc. complete as per direction of departmental officers

Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Centering with Steel Plates including strutting,lining and levelling etc complete

For Plinth Beams and footings sides

Columns

Beams

RCC 1:1.5:3 mix using 20mm HBG Jelly from approved quarry

Supply and fabrication of RTS rods in various dia including cutting and bending etc

FLY ASH Brick work in cement mortar 1:5 mix (one cement five sand) using II class table molded bricks chamber burnt bricks of size 9" X 4 1/2" X 3" for the following including curing etc., completed.

Refilling the excavated earth including watering and consolidation layer by layer with all incidental charges etc complete

Filling with Well Gravel including watering and consolidation layer by layer with all incidental charges etc complete

Supply and Fixing of M.S. Door using all round 25x25x6 mm thick cross bracing 20x6 mm M.S. Flats and M.S. sheet 18g with necessary locking arrangements including one coat of Red oxide paint (0.60 x 1.85m)

Plastering for brickwork surfaces using cement mortar 1:5 (One part of cement, Five parts of sand by volume) thickness 12mm (average) for all internal/external surfaces like superstructure, rainwater ducts, elevation fin walls, manholes, inspection chambers, entrance & staircase steps etc., finished smoothly to one level including scaffolding, curing etc., complete, at all leads and at all heights.

Plastering for brickwork surfaces using cement mortar 1:3 (One part of cement, three parts of sand by volume) thickness 10mm (average) etc complete as per the direction of departmental officer

Painting with enamel paint two coats over base coat for windows and doors etc., completed

Painting with first quality emulsion paint two coats over a priming coat including thorough cleaning, scrapping, removal of dust and including necessary plaster of paris putty works wherever required etc., completed.

Paving the floor with Vitrified Floor Tiles of size 60 X 60cm of approved brand and colour Marbonite tiles in all floors base layer of cement mortar 1:3 (one cement and three sand) 20mm thick using first quality Marbonite tiles of size 60 X 60cm and point with colour cement neatly and fixed in position so as to make perfectly smooth and to alignment etc., complete complying with standard specification

Daddoing the walls with first quality approved white glazed tiles of size 150x150x6 mm laid in cement mortar 1:2 mix to 10mm thick and painting with white cement using 0.40 kg/1m2 including finishing the jointing and painting flush with tiles surface etc., complete - 10 m2

Supplying and fixing in position european water closet of size 580 X 440mm, white glazed earthen ware of approved quality with 'P' trap or 'S' trap confirming to IS:2556 - Part XII with sand cushion and forming flooring alround the closet using 40mm broken brickjelly in lime concrete 1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers. (D)

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A FT switch and making good of the concealed portion with suitable colour for PVC concealed light / fan Point (for electronic regulator) (5 points per coil)

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet cover for 5A 3 pin non inter locking wall socket with 5A flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point

Supply and fixing of 1200mm ac ceiling fan complete with elapsed electronics 300W regulator with 300mm down red on the existing clamp

Supply and erection of 500 litre HDPE tank with water supply connection etc completed

Supply of WT bulk head fittings with guard suitable for 100W blub

Supplying and fixing with galvanished iron sheet (corrugated) 24 gauge thick including necessary bolt, nuts and bitumen washed etc., completed - 10 m2

Fixing name board including lettering and painting as per the direction of the departmental officers etc., complete

Water supply arrangements

TNEB Service Charge

Add :- GST @ 18%

JAYALAKSHMI BUKDERS (BID ID -1291753)