Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.9 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹33.9 L+₹44,832 (1.34%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹35.5 L+₹2.1 L (6.23%)Rejected-Finance | L3 | Rejected-Finance Being L3 |
Tender Value
₹37.7 L
EMD Value
₹75,400
Closing Date
24 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE E/M Lucknow
Garrison Engineer E/M, 36 LBS Marg, Lucknow Cantt, Lucknow (U.P.) PIN 226002
ADDN/ALTN OF BLDG NO EW-5 MATERNITY WARD OF CH (CC) AND OTHER SANCTIONED WORKS IN THE AREA OF AGE E/M (HOSP) UNDER GE E/M LUCKNOW
2022_MES_539325_2
CA NO. GE/EM/LKO/HOSP/T-38 OF 2022-2023
Open Tender
Civil Works
Item Rate
180 days
GE E/M Lucknow
As per NIT
8 documents required · 8 mandatory
₹500
GE E/M Lucknow
₹75,400
Yes
1 Nov 2022
29 Aug 2022
26 Sept 2022
29 Aug 2022
24 Sept 2022
12 Sept 2022
Amount
Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.
S&F in 0.50 mm Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheeting made to any shape or Semi-ciruclar any colour having tensile strength of 550 Mpa as in roof covering/ cladding complete with self tapping screw complete all as specified and directed.
All as per item No 2 above but plain sheet on ridge/gutters
Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.
S&F rolled setion gde Fe 410 -W (Gde- E- 250) quality as in main and cross beams, hip and jack rafters,purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates incl. rivets or bolt, complete all as specified and directed.
M & L MS Nut & Bolt n.exc 12mm dia and length n.exc 5 cm long, complete all as specified and directed.
M&L for preparing new steel steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for preparing old steel steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Dismantling of wall and ceiling boards (fiber, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed.
S & F Anodised aluminium snap grid frame work for false ceiling including fixing arrangements to roof truss with suitable GI wires complete all as specified and directed.
M & L for 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium frame work, complete all as specified and directed.
All as per item No 11 above but except of ceiling boards
Taking down chowkhats with shutters(without taking off shutters) of any description not exc 1.5 Sqm each, complete all as specified and directed.
Taking down chowkhats with shutters(without taking off shutter) of any description exc 1.5 Sqm but nexc 4 Sqm each, complete all as specified and directed.
Taking down Shutters of any description exc 1 sq. m but not exc 2 Sq.m each, complete all as specified and directed.
Refixing of Shutters of any description exc 1 sq. m but not exc 2 Sq.m each in same opening including repairing with complete hinges, complete all as specified and directed.
S & F for Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples, complete all as specified and directed.
S&F 2nd class Hard wood in plain, solid, straight chowkats and frames wrought framed, rebated on the solid, rounded or chamfered put together with glue pinned joints complete all as specified and directed.
M&L 30mm thick 2nd class hard wood Glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.23(b) complete all as specified and directed.
M&L for 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.
S & F for powder coated aluminium extruded sections (conforming to IS) (minimum thickness of powder coating 50 micron) three track sliding window shutter with frames comprising series-C (20mm) , duly fitted with neoprene beading, glazing clipss, locking devices, heat absorbing glass 3.5mm thickness (in 2 shutters) and with SS wire cloth of 0.46mm nominal dia of wire and average width of aperature 1.4mm (in one shutter) complete all as specified and directed.
S & F for powder coated aluminium extruded sections (conforming to IS) (minimum thickness of powder coating 50 micron) fixed type ventilators with partiction sections in two parts (one part fixed with frosted glazing and other part fixed with SS wire cloth) duly fitted with neoprene beading, glazing clipss, locking devices, figured glass glass 3mm thickness complete all as specified and directed.
S & F solid door frame of size 50mmx47mm made out of 5mm thick PVC sheet prelaminated on single side and plain on other side, reinforced with MS square tube including painting of edges to match with prelaminated sheet, fixed in opening as per specification & drawing, complete all as specified and directed.
S & F for factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struk, complete all as specified and directed.
S & F for 3mm thick ordinary Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, complete all as specified and directed.
M&L plain cement concrete type B1 ( 1:2:4) using 20 mm graded stone aggregate as in lintels upto 1.5m clear span, cills,steps; seismic and other similar band, copings, landing slab, bed plates, and like including weathering slightly rounded or chamfered angles & necessary form work complete all as specified and directed.
S&F mild steel work as in hold fasts and similar articles conforming to Fe.290.Gde-E-165, complete all as specified and directed.
M&L for preparation of old wooden surface over 10cm width or grith & applying two coats of synthetic enamel paint of 1st quality over a coat of pink primer complete all as specified and directed.
S & F in repair aluminium anodized barrel tower bolt of extruded section, 150 mm long complete all as specified and directed.
S&F for 75 mm size butt hinges extruded brass with mild steel pin, bright polished type B11 medium weight, cold rolled, complete all as specified and directed.
S&F aluminium handle 125 mm size,cast type, anodised complete all as specified and directed.
S&F for 250 mm Aluminium alloy anodised,sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed.
S & F (in repair) 20 mm dia fancy type drapery curtain rod made of mild steel duly PVC sleeved complete all as specified and directed.
S & F in repair powder coated brackets for fixing curtain rod of any dia and fixed complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) & removing & rubbish off the premises complete all as specified and directed.
M&L for non skid ceramic tiles of 7-8 mm (square or rectangular) area of each tile exceeding 0.06 sqm but n.exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick cement mortor 1:4, complete all as specified and directed.
M&L for non skid ceramic tiles of 7-8 mm (square or rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick cement mortor 1:4, complete all as specified and directed.
M&L for Glazed ceramic coloured tiles in vertical surface 300x200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick cement mortor 1:3 complete all as specified and directed.
M&L for glazed colour ceramic tiles of size 350x250x7mm/ 450x350x7mm thick any tint, on vertical surfaces set and jointed in neat cement slurry and pointed in white / coloured cement to match over and including 10mm thick cement mortor 1:3 complete all as specified and directed.
Taking down cement plaster on brick wall, racking out joints hacking for key scrubbing down with water complete all as specified and directed.
Demolition of brick work or stone / boulder masonry built in cement mortar or cement lime mortar including all quions, arches, pillars etc but excluding ashlar facings, dressed stone work and pre cast concrete articles complete all as specified and directed.
M&L fly ash bricks, old size as per IS 1489 (Part I)-2002 buit in CM 1:6 straight or curved on plan exc. 6 M mean radius complete all as specified and directed.
M&L for rendering 10 mm thick on brick work/ concrete surfaces in cement mortar 1:6 on fair faces finished fair & even, complete all as specified and directed.
M&L for 15 mm thick rendering in CM 1:4 on fair faces of brick work surface finished even and fair without using extra cement, complete all as specified and directed. (Note : Integral WPC shall be measured and paid seprately )
Supply only integral water proofing compound powder ISI marked, complete all as specified and directed.
Preparation of newly plastered surfaces and applying two coat of oil bound disemper over one coat of oil base primer all as specified on walls surface.Incl a coat of 1.5mm wall care putty, complete all as specified and directed.
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm including preparation of new/old surfaces over and including 2mm thick wall care putty complete all as specified and directed. Note:- Painting/primer to be carried out through air less spray machine (mechanical means).
Demolition of cement concrete (un-reinforced) in ground floors and paving n. exc 15 cm thickness (below or above ground level), complete all as specified and directed.
M&L 75 mm thick cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) as plinth protection/path and the like complete all as specified and directed.
M&L for Cement concrete type D2 1:4:8 (using 40mm graded stone aggreages) as in foundations, filling and mass concrete complete all as specified and directed.
S & F in repair virteous china wash down water closet pan (pedesatal patter) white (excluding fixing bolts, flushing cistern and flush pipe, complete all as specified and directed.
Taking up or down steel tubing and connections 15 mm bore including cleaning for refixing or removal to store, complete all as specified and directed.
Taking up or down steel tubing and connections 20 mm bore including cleaning for refixing or removal to store, complete all as specified and directed.
S&F tubes 15 mm bore "medium grade" with all fittings & fixed complete to wall and ceilings or laid in floor complete all as specified and directed.
S&F tubes 20 mm bore "medium grade" with all fittings & fixed complete to wall and ceilings or laid in floor complete all as specified and directed.
S&F in repair bib taps for 15 mm bore pipe cast copper alloy chromium plate with crutch or butterfly handle,screwed down, screwed for iron pipe and fixed, complete all as specified and directed.
S & F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed (bore of pipe 15mm), complete all as specified and directed.
S & F in repair PVC valveless, syphonic action type 10 ltrs flushing cistern low level white with inlet, ball valve float and handle incl brackets and waste pipe complete all as specified and directed.
S&F PVC connection for 15 mm bore pipe (Length 450 mm approx), complete all as specified and directed.
S&F(in repairs) CP brass tubular towel rail 20 mm dia and 600 mm long including brackets complete all as specified and directed.
S&F in repair angle valve two way cast copper alloy, fancy type, chromium plated with cup (concealed type) (bore of pipe 15 mm) complete all as specified and directed.
S&F in repair vitreous china wash basin (WHB) , white , flat back, size 550mmx400mm including brackets, waste fittings , brass Chromium plated for glazed basins etc. with long screw shanks and fly nuts , flange end embedded in red lead cement , including cutting, complete all as specified and directed.
Supply only waste fittings, brass, chromium plated for glazed ware basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed (32 mm bore), complete all as specified and directed.
S& F in repair Brass Chromium plated shower roses 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.
S& F in repair for 15mm Stop valves, cast copper alloy, screwed down, high pressure, fancy type, chromium plated with long shank and cup (concealed type) screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.
M&L for complete removal existing treatment and distempering walls with two coats of distemper oil emulsion white or tinted over a coat primer on wall sufaces including a coat of Brila / JK wall care putty, complete all as specified and directed.
M&L for complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm including preparation of new/old surfaces over and including 2mm thick wall care putty complete all as specified and directed. Note:- Removal of existing treatment/Painting/primer to be carried out through air less spray machine (mechanical means)
Taking down pipes (any size) incl all fittings, complete all as specified and directed.
S &F 110mm bore (SWR) pipe single socketed in any length with rubber ring joints,fixed to walls, complete all as specified and directed.
All as per item No 70 above but dia of 75mm
S & F 110mm bore PVC(SWR) junction single (single Tee) equal or unequal with access door, complete all as specified and directed.
All as per item No 72 above but dia of 75mm
S&F 110mm bore PVC (SWR) bend of any radius, complete all as specified and directed.
S & F for 32mm bore Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed, complete all as specified and directed.
S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed.
S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.
S&F for health faucet, chromium plated rising spray with wall brackets with 1.5m long metallic flexible tube, with 15 mm dia fixed complete all as specified and directed.
Excavating in trenches in soft/loose soil n exc 1.5 m wide and n exc 1.5 m depth and getting out for foundation, complete all as specified and directed.
Returning filling in including spreading levelling, watering and well ramming in layers n exc 25 cm in soft/loose soil, complete all as specified and directed.
Removing excavated materials n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point, complete all as specified and directed.
M & L for lead lining doors (radiation protection doors) along with lead lining, ply board, mica pasting, butt hinges, hydroulic door closers, slinding bolt, tower bolt including all necessary fittings required for installation with and including installation at site complete all as specified and directed.
Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m and getting out in all kind of soil, complete all as specified and directed.
Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift exceeding 1.5m but not exceeding 3.00m and getting out in all kind of soil, complete all as specified and directed.
M & L for Plain Cement concrete type C2, 1:3:6 (using 40mm graded stone aggregates) as in in foundations, filling and mass concrete, complete all as specified and directed.
M & L for RCC M-30 (Design mix) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and directed.
Formwork to curved sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, complete all as specified and directed.
M & L for RCC M-30 (Design mix) as in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses, complete all as specified and directed.
M & L for Formwork to curved faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter, complete all as specified and directed.
M & L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
Hardcore of broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and directed.
M & L for 75 mm thick Cement concrete type C-2,1:3:6 (40mm graded aggregate) as in floor/sub base and finishing the surface even and rough complete all as specified and directed.
M & L for 10mm thick Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors, complete all as specified and directed.
M & L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth, complete all as specified and directed.
M & L for 40mm dia Tubes, 'medium grade', galvanised, with all fitting; laid in trenches, complete all as specified and directed.
M&L for 75 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in base complete all as specified and directed.
M & L for cement concrete type B1 , 1:2:4 mix using 20 mm graded aggregate as in kerb stones and similar articles with plain faces including formwork complete all as specified and directed.
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed.
M & L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. (Note:- floor spring will be suitable for toughtned glass door upto 1.25 m wide shtters)
Taking down carefully aluminium conductor point wiring (light, socket or power) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc. and removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately)and making good disturbed surfaces of walls, floors, etc. to match with the existing good disturbed surfaces of walls, floors etc. match with the existing complete all as specified and directed.
M&L point wiring for one light/fan point controlled by one, one way switch by using 1.5 Sq mm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including PVC concealed conduits and conduit accessories/fittings, pressed steel terminal switch boxes, 3 mm thick Bakelite sheet top cover (ISI Marked) fitted with Chromium plate brass screws washers and 1.5 Sq mm nominal cross sectional area multistranded copper conductor green PVC insulated unsheathed earth wire and connecting to earth dolly complete all as specified and directed.
All as per item No 102 above but socket outlet point 5 amps on independent board
All as per item No 102 above but one socket outlet point on same baord
M&L point wiring for 15 amps socket point controlled by one, one way switch using 2.5 Sq mm nominal cross sectional area multi stranded copper conductor, PVC insulated FRLS unsheathed cables in and including PVC concealed conduit and conduit fittings including pressed steel terminal switch boxes and 3 mm thick plate for fixing of switches/sockets and fitted with Chromium plated brass screws & washers and1.5 Sq mm nominal cross sectional area multi stranded copper conductor, PVC insulated unsheathed earth wire and connected to earth dolly complete all as specified and directed.
S&F Polycarbonate switch piano flush type, SP,5/6 Amps, complete all as specified and directed.
S&F Polycarbonate switch piano flush type, SP, 16/20 Amps, one way equivalent of other specified make complete all as specified and directed.
S&F Polycarbonate socket out let 2 in 1 socket 5 pin, (6 Amps) flush type controlled by one switch, specified make complete all as specified and directed.
S&F Polycarbonate socket out let 6 pin, 20 Amps ISI Marked 20 Amps 240 Volts flush type, make complete all as specified and directed.
S & F Ceiling rose, Pilot 3 Plate ceiling rose 6A, complete all as specified and directed.
S&F Indian standard fan step regulator 100 watt, complete all as specified and directed.
S&F in repair epoxy powder coated distribution box SPN 8 way, 240 Volts for MCBs, grouted flush to walls complete with IP 43 and metal double door complete all as specified and directed.
S&F MCBs of the SP, 20 to 32 Amps, 240 Volts rating and to be housed in DBs catered here in after complete all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCBs are including in unit rate of each MCB of any rating)
All as per item No 113 above but SPN 32 to 40 Amps, 240 Volts
M&L for sub main wiring comprising two single core, 4 Sq mm nominal cross sectional area multi on same copper conductor cable, PVC insulated FRLS Grade unsheathed 1100 Volts grade drawing in and over PVC conduits and conduit fittings complete (concealed type) complete all as specified and directed. (Note :- Rate of cutting chases and making good of disturbed surfaces shall be included in the unit rate )
M&L for concealed sub main wiring comprising two single core, 10 Sq mm nominal cross sectional area multi on same copper conductor cable, PVC insulated FRLS grade unsheathed 1100 Volts grade drawing in and over PVC conduits and conduit fittings complete (concealed type) including S&F 10 Sq mm nominal cross sectional area on same copper conductor cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified and directed. (Cutting chases and making good of disturbed surfaces shall deem to be including in the unit rate quoted by tenderer).(Note :- Extra length of cables/wire required for connection to MCBs shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly)
M&L Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in to ground (earth pit) not less than 2.25 meters deep below GL with top edge of earth plate not less than 1.50 m below ground level, connected to GI lead wire of 4 mm dia. (7.50 m long) by means of nuts, bolts and washers, check nuts of GI and protected by the GI pipe light grade 1.5 mm nominal bore (7.50 m Long) for earth plead wire, watering pipe light grade of 20 mm nominal bore, 0.63 mm thick CI funnel, wire mesh etc complete including necessary earth work and excavation in any type of soil, PCC 1:2:4 type B1 earth pit and Precast RCC cover 50 mm thick dully reinforced with 6 mm dia, MS round bars @ 100 mm C/C both ways, earth testing point, making good to floor complete all as specified and directed.
S&F plug and socket DBs with Single pole MCBs rated 20 Amps capacity all as specified or equivalent of other make including making niche in wall and mounted flush complete all as specified and directed.
S&F in repair distribution Board TPN with and including of DPX MCCB 25 KA 125 Amps MCCB FP, as incomer and SP/TPN MCBs as outgoing protection class IP 54, 8 way (DPX 125+24) with metal door double, complete all as specified and directed. Note :- FP MCCBs 25 KA 125 Amps1 No and 24 Nos MCB SP 32 Amps 230 Volts and Blanking plate shall be measured and paid under this this item )
Supply and fixing in replacement of Recess LED llight fittings of size 2X2 36 watt LED made of CRCA powder quoted finish with Fully Covered by PMMA Acrylic Lumio Diffuser, LED Used shall be SMD type and fixture including cutting and making false ceiling of any pattern/mtrl proper fixing of light in falce ceiling , electrical connection up to 15 feet height of various ward and dept complete all as specified and directed.
Supply and fixing flat white flexible copper cable three core 1.00 sqmm suitable for connection of light fittings/ FTL fittings/ceiling fan etc complete all as specified and directed.
S & F Lamp holder battern/anguler type , PVC/polycarbonate type with cord grip cap suitable for LED bulb of 7/9/11 watt, complete all as specified and directed.
M & L for taking down and Refixing of Ceiling fan 1200/1400 mm sweep AC 230 volts single phase including painting,servicing, making connection with three core PVC insulated 1100 volts grade multi stranded copper wire of appropriate size complete all as specified and directed.
M & L for taking down and Refixing of Metal Body Exhaust fan 300/450 mm sweep AC 230 volts single phase with louvers including including painting,servicing, making connection with three core PVC insulated 1100 volts grade multi stranded copper wire of appropriate size complete all as specified and directed.
M & L for taking down and Refixing of Electric Geyserss including including Painting, servicing, making connection with three core PVC insulated 1100 volts grade multi stranded copper wire of appropriate size complete all as specified and directed.
Supply and fixing in replacement LED battern fitting with LED Tube light Rod 18/20 watt 4 feet retro type complete all as specified and directed.
M & L for shifting of split type A/C up to 05 mtr distance from existing location including copper pipe, cover , necessary gas charging fixsing on wall for All other connected civil work & other misc work reqd for installation old split AC for proper functioning complete all as specified and directed. (a) Additional length of copper tubes (upto 15 RM) for compressor inlet/outlet with insualting mtrl included in this rate.
S&F for 1000 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt I. complete all as specified and directed.
S & F Ball brass valve, high pressure with polythene float, steel rod & fly nut screwed for iron pipe or brass ferruel and fixed to GI pipe complete all as specified and directed.
S&F Gun metal , globe or gate valves, with iron wheel head, screwed both ends for 20 mm bore dia. iron pipe and fixed complete all as specified.
Cutting chases, pining in, making good match to existing surface/facing where required and pointing in cement mortar 1:3 end or edges of landing, steps cill, sun shades, sheleves, lintels, concealed water tubing etc. exe 10 cm but n. exc. 20cm girth in brick wall complete all as specified.
M&L mild steel framed works such as grill, grating, etc. with end of bars shouldered and/or riveted or forged into spikes, framed gusrd bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar works conforming to Fe 290 Gde E-165 complete all as specified and directed.
M & L testing and commissioning of storage type water heater 25 ltrs capacity, 4 star rated, vertical mounting type made out of CRCA outer body with copper storage tank complete in all respects with and including necessary connections with suitable size of copper multistranded cable complete all as specified and directed.
S&F Gun metal , globe or gate valves, with iron wheel head, screwed both ends for 15 mm bore dia. iron pipe and fixed complete all as specified.
S&F in repair SPN sheet metal enclosure with socket plug top and MCBs with 2 pin and earth plug and socket rated 25 Amps capacity including single pole MCB of 20 Amps complete all as specified and directed.
M K Engineers and Contractors
M R CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .