REPAIRS TO WOODEN / STEEL / PVC / ALUMINIUM JOINERY/FALSE CEILING AND WALL PANNELLING IN OTM AND MD ACCN AT ORC / BOLTON ROAD AND CAW AREA UNDER GE AF HAKIMPET

Amount

Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frames) complete all as specified and as directed.

Taking down and removing to or from stores Chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frame) complete all as specified and as directed.

Taking down shutters of any description not exc 1 Sq mtr each complete all as specified and as directed.

Description all as per Ser Item No 3 above but exc 1.0 Sqm and not exc 2 sqm each complete all as specified and as directed.

S & F 2nd class hard wood plain, solid straight chowkats and frame, wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete including treating the back of chowkaths with coal tar black paint complete all as specified and as directed.

Supply and fixed of size 125 mm X 60 mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed.

M&L for PCC 1:3:6 type C-1 mix (using 20 mm graded stone aggregate) as in filling in pressed steel door frames complete all as specified and as directed.

M&L for Cutting holes in brick/stone walls not exc. half brick thick walls in cement mortar or cement lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and as directed.

S & F Solid PVC Door Frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube,supplying and fixing in opening as per manufacturers instructions complete all as specified and as directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails .M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail ,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in the frame as per manufacturers instructions complete all as specified and as directed.

S&F 100 mm long stainless steel butt hinges for PVC door frame complete all as specified and as directed.

S&F 35 mm thick plain factory made framed panelled shutters (any type of panel) with lock rail and panel of 9mm BWP commercial ply The size of rail and stile as per IS 1003 (Part-I0 Kiln seasoned and chemically pressure treated complete all as specified and as directed.

S & F, 35 mm thick, 2nd class hard wood glazed & skelton shutters, open rebated & prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I section 8 clause 8.20 (a) complete all as specified and as directed.

Description all as per Ser Item No 13 above but 30 mm thick as in window, ventilator shutters complete all as specified and as directed.

S&F 40 mm thick flush door shutters solid core construction with black board core and ply wood face panels commercial type on both sides complete all as specified and as directed.

S&F 2nd class hard wood in fillets,squre, rectangular in section wrought, secured with nails sectional area exc 13 Sqcm and n.exc 25 Sqcm fixed in repairs.complete all as specified and as directed.

S & F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

S & F in repairs Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

M&L for Preparatioin of new wooden surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat pink primer complete all as specified and as directed.

Supply and fix in repairs 100 mm size medium weight cold rolled mild steel butt hinges complete all as specified and as directed.

Supply and fix in repairs 75 mm size medium weight cold rolled mild steel butt hinges complete all as specified and as directed.

S&F 300mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S&F 100 mm long aluminium anodised barrel tower bolt of extruded section. complete all as specified and as directed.

S & F 150 mm long extruded aluminium alloy handles fabricated type anodised complete all as specified and as directed.

S & F 100 mm long extruded aluminium alloy handles fabricated type anodised complete all as specified and as directed.

S&F Extruded brass handles 75 mm long for kitchen cupboards,fabricated type polished complete all as specified and as directed.

S & F, 300 mm long MS ordinary rat tail rod pattern springs inc. roller & roller plate complete all as specified and as directed. Make :- Crown/Swastik

Supply and fix Floor door stopper of aluminum alloy body and tongue, anodised with hard drawn steel spring of 150 mm long complete all as specified and as directed.

S & F in repairs 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S&F in repairs 150 mm long aluminium anodised barrel tower bolt of extruded section. complete all as specified and as directed.

S & F in repairs 150 mm long extruded aluminium alloy handles fabricated type anodised complete all as specified and as directed.

S & F in repairs, 300 mm long MS ordinary rat tail rod pattern springs inc. roller & roller plate complete all as specified and as directed. Make :- Crown / Swastik

S&F MS Framed work such as grills or gratting etc with ends of bars welded of any size and any design including welding of Fe 290 Grade E-165 complete all as specified and as directed.

S&F mild steel flat iron hold fast of any size and similar articles confirming Fe 290 Grade E-165 complete all as specified and as directed.

S & F, steel windows with side hung shutters including projecting type hinges with steel handle & steel peg stay, complete with glazing bars, dovetailed or welded including taking down the old window complete all as specified and as directed.

S & F, steel ventilators with top hung shutter including projecting type hinges with steel handle & steel peg stay, complete with glazing bars, dovetailed or welded including taking down the old ventilators / window complete all as specified and as directed.

Hacking out old broken glass exc 1.5 sqm (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins / spring clips and providing and fixing new ones complete all as specified and as directed.

S&F 4.0 mm thick sheet glass ordinary quality fixing with putty / beading in square in each pane. complete all as specified and as directed.

Description all as per Ser item No38 above but figured glass, pin head type complete all as specified and as directed.

S & F Anodiesed aluminium frame for doors, windows ventilators with one or more rebets including jointing cleats for fixing etc complete all as specified and as directed.

S&F Anodised aluminium door shutter, aluminium section weighing 0.55 Kg per M including necessary jointing cleats, glazing clips rubber neoprene packing, handles 2 nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and as directed.

S & F anodised aluminium window and ventilator shutters, side hung type without sash bars aluminium sections weighing 0.55Kg per M including necessary jointing cleats, glazing chips, rubber packing, anodised aluminium snap beading, screws anodised aluminium fittings such a peg stays 150mm long (1No) hinges type D-21 100mm long (2No) suitable handle (1No) complete all as specified and as directed.

Taking down and refixing aluminum anodized door shutters with or without frames and repairs of rubber bedding including jointing cleats, easing, greasing and necessary fitting & all accessories complete all as specified and as directed. (approx size of door 1.1 m x2.1 m)

S&F 5.5 mm thick plain sheet glass glazing any size with rubber packing where ever required complete all as specified and as directed.

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, as per requirement complete all as specified and as directed..

S & F MS Mortice lock 4 leavers vertical type size 100 mm complete all as specified and as directed.

S & F in repairs MS Mortice lock 4 leavers vertical type size 100 mm complete all as specified and as directed.

S & F Aluminium (Die cast ) body door closer hydrolically regulated designation No.3 universal type suitable for door shutters of 851 to 1000 mm in width and wt between 61 to 80 kgs complete all as specified and as directed.

S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed fixed.complete all as specified and as directed.

M&L for welding in repairs n. exc 2.50 cm in length, thickness of metal to be welded exc 6 mm but n. exc 9 mm complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed.

M&L for 15 mm thick Screed bed or bedding layer for laying floor finishes in CM 1:6 complete all as specified and as directed.

M&L for non skid coloured ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.06 Sqm but not exc 0.11 sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match the shade using coloured tiles complete all as specified and as directed.

M&L for 10 mm thick rendering in CM 1:4 on brick or concrete surfaces as in backing coat to receive tile finish as in skirting and dados etc complete all as specified and as directed.

M&L for glazed ceramic coloured tiles in vertical surfaces 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Dismantling ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets complete all as specified and as directed.

M&L for 12 mm thick perforated particle board / tiles for insulation and accoustic purpose, 60 cm X 60 cm in size, fixed with staples on snap grid in ceiling complete all as specified and as directed.

M&L for Providing and fixing 10 mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface with raised moulding over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh complete all as specified and as directed.

M&L for applying two coats of distemper oil emulsion and preparation on ceiling board surfaces complete all as specified and as directed.

Taking down cement or cement lime plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

M & L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 complete all as specified and as directed.

M&L for preparing newly plastered surface of walls priming plastered and other surfaces with alkali resistant primer and applying two coats of distemper oil emulsion complete all as specified and as directed.

S&F 25 mm dia powder coated MS curtain rod with fixing bracket stops and taking down old pipe complete all as specified and as directed.

S&F fancy type curtain rod with brackets fancy type and taking down old complete all as specified and as directed.

S&F cabinet mirror of standard size as in repairs complete all as specified and as directed. Make - : Prayag or equivalent approved make

S&F 50 mm dia, polished, hard wood knobs fixed with screws complete all as specified and as directed.

S&F stainless steel plate rack of size 900 mm X 1200 mm X 250 mm, rectangular 1mm thick including fixing to walls with wooden gutties and screws complete all as specified and as directed.. Make : - Prayag / Deep / Anjali

Taking down cupboard shutter with shelves cub boards exc 2 sq mtr each (One cupboard set) of any type complete all as specified and as directed.

M&L for 2nd class hardwood plain fillets, rectangular or triangular in section exc 3 sq cm & not exc 6 sq cm, clean sawn, secured bullnosed, splayed, chamfered or roundedwith nails fitted with wall for peg set complete all as specified and as directed.

S&F 2nd class hard wood skelton shutter, open rebated and prepared to receive prelamintated board 12 mm thick for cupboard etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing and size of side rail,top rail &bottom rail 75 mm width complete all as specified and as directed. Note :- 12 mm thick prelaminated board will be measured and paid seprately.

S&F 18 /19 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice laminaion & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed.

S&F 12 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice laminated & other side balancing, white lamination, fixed with screws to timber frame work. complete all as specified and as directed.

M&L for Extra over rates of 18 / 19 mm thick particle board for external teak wood lipping, 6 mm thick,fixed with nails complete all as specified and as directed.

S&F continuous (piano) hinges, mild steel, bright finish or electro galvanised width of flap 40 mm complete all as specified and as directed.

Supply and fixing 100 mm size hasp and staple, hinge type aluminium anodised complete all as specified and as directed.

S&F brass magnet for cupboard shutters etc complete all as specified and as directed.

M&L Ball bearing for rolling shutters complete all as specified and as directed.

S&F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed.

S&F Steel rolling shutters,1.0 mm thickness of lathe ,with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and as directed.

M&L for At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and as directed.

VACON INFRASTRUCTURES