Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
Refer Docs
EMD Value
₹8,700
Closing Date
26 May 2021, 11:30 amClosed
EXECUTIVE ENGINEER (EnM) WnS S-III
D-Block, Saket. Opp. PVR cinema. New Delhi-110017
Repair and Rewinding of Skope Make Sub. Pump Set at Various Tube wells in Ward No-67 and 69 in Mehrouli Constituency, AC-45
2021_DJB_203434_3
NIT No-03 / EE (EnM) WnS S-III
Open Tender
Electrical Works
Works
30 days
D-Block, Saket. Opp. PVR cinema. New Delhi-110017
Please refer Tender documents.
3 documents required · 3 mandatory
₹500
Delhi Jal Board
₹8,700
Yes
2 Jun 2021
19 May 2021
26 May 2021
19 May 2021
26 May 2021
19 May 2021
Repair and Rewinding of 5 HP 4” Dia skope make sub. Pump set no. –M-403 By carrying out following works: Providing of Rewinding kit for Motor 1 Set, Stage bowls P.P. 3 Nos., Impeller P.P. 4 Nos., Water Seals 2 Nos., Rotor Sleeve Turning & Polishing 1 Job, Stamping Repairing 1 Job, Shaft Stationing 1 Job., Labour Charges 1 Job.
Repair and Rewinding of 5 HP 4” Dia skope make sub. Pump set no.–M-407By carrying out following works: Providing of Rewinding kit for Motor 1 Set, Seal Bush 1 No., Stage Bowls P.P. 4 Nos., Impeller P.P. 4 Nos., Rotor end welding Sleeve Turning & Polishing & Key way making 1 Job, Shaft Stationing 1 Job., Labour Charges 1 Job.
Repair and Rewinding of 5 HP 4” Dia skope make sub. Pump set no. – M-410By carrying out following works: Providing of Rewinding kit for Motor 1 Set, Thrust Plate 1 No., Water Seals 2 Nos., Stage Bowls P.P. 3 Nos., impeller P.P. 3 Nos., Shaft Stationing 1 Job, Stamping Repairing 1 Job., Labour Charges 1 Job.
Repair and Rewinding of 5 HP 4” Dia skope make sub. Pump set no. – M-413By carrying out following works: Providing of Rewinding kit for Motor 1 Set, G.M. Bearing Bush 2 Nos., Seal Bush 1 No., Stage Bowls P.P. 3 Nos., Impeller P.P. 3 Nos., Rotor end welding Turning & Polishing & Key way making 1 Job, Labour Charges 1 Job.
Repair and Rewinding of 5 HP 4” Dia skope make sub. Pump set no. – M-414By carrying out following works: Providing of Rewinding kit for Motor 1 Set, Impeller P.P. 4 Nos, Stage Bowls P.P. 3 Nos., Rotor Sleeve Turning & Polishing 1 Job, Epoxy Paint for Rotor 1 Job, Labour Charges 1 Job.
Repair and Rewinding of 5 HP 4” Dia skope make sub. Pump set no. – M-416By carrying out following works: Providing of Rewinding kit for Motor 1 Set, Water Seals 2 Nos., Stage Bowls P.P. 3 Nos., Impeller P.P. 4 Nos, Rotor end welding Sleeve Turning & Polishing & Key way making 1 Job, Epoxy paint for Rotor 1 job, Labour Charges 1 Job.
Repair and Rewinding of 5 HP 4” Dia skope make sub. Pump set no. – M-417 By carrying out following works: Providing of Rewinding kit for Motor 1 Set, Upper Housing 1 No., Stage Bowls P.P. 4 Nos., Impeller P.P. 4 Nos., Stamping Repairing 1 No , Shaft Stationing 1 Job, Labour Charges 1 Job.
Repair and Rewinding of 5 HP 4” Dia skope make sub. Pump set no. – M-420 By carrying out following works: Providing of Rewinding kit for Motor 1 Set, Bearing Bush 2 Nos., Seal Bush 1 No., Stage Bowls P.P. 3 Nos., Rotor end welding Turning & Polishing & Key way making 1 Job, Epoxy paint for Rotor 1 job, Labour Charges 1 Job.
Repair and Rewinding of 5 HP 4” Dia skope make sub. Pump set no. – M-422 By carrying out following works: Providing of Rewinding kit for Motor 1 Set, Stage Bowels P.P. 4 Nos., Impeller P.P. 4 Nos., Rotor Sleeve Turning & Polishing 1 Job, Epoxy Paint for Rotor 1 Job, Labour Charges 1 Job.
Repair and Rewinding of 5 HP 4” Dia skope make sub. Pump set no. – M-423 By carrying out following works: Providing of Rewinding kit for Motor 1 Set, Water Seals 2 No., Thrust Plate 1 No., Connection Piece. 1 Nos., Rotor Sleeve Turning & Polishing 1 Job., Epoxy Paint for Rotor 1 Job, Stamping Repairing 1 Job., Labour Charges 1 Job.
Repair and Rewinding of 5 HP 4” Dia skope make sub. Pump set no. – M-426 By carrying out following works: Providing of Rewinding kit for Motor 1 Set, N.R.V. Body 1 No , Thrust Plate 1 No., Water Seals 2 Nos., Stage Bowls P.P. 3 Nos., impeller P.P. 3 Nos., Shaft Stationing 1 Job, Labour Charges 1 Job.
Repair and Rewinding of 5 HP 4” Dia skope make sub. Pump set no. – M-428 By carrying out following works: Providing of Rewinding kit for Motor 1 Set, Stage bowls P.P. 5 Nos., Impeller P.P. 4 Nos., Water Seals 2 Nos., Rotor Sleeve Turning & Polishing 1 Job, Stamping Repairing 1 Job, Shaft Stationing 1 Job., Labour Charges 1 Job
Repair and Rewinding of 5 HP 4” Dia skope make sub. Pump set no. – M-431By carrying out following works: Providing of Rewinding kit for Motor 1 Set, Seal Bush 1 No., Stage Bowls P.P. 4 Nos., Impeller P.P. 4 Nos., Rotor end welding Turning & Polishing & Key way making 1 Job, Shaft Stationing 1 Job., Labour Charges 1 Job.
Repair and Rewinding of 5 HP 4” Dia skope make sub. Pump set no. – M-433By carrying out following works: Providing of Rewinding kit for Motor 1 Set, Thrust Plate 1 No., Water Seals 2 Nos., Stage Bowls P.P. 3 Nos., impeller P.P. 3 Nos., Shaft Stationing 1 Job, Stamping Repairing 1 Job., Labour Charges 1 Job.
Repair and Rewinding of 5 HP 4” Dia skope make sub. Pump set no. – M-435By carrying out following works: Providing of Rewinding kit for Motor 1 Set, G.M. Bearing Bush 2 Nos., Seal Bush 1 No., Stage Bowls P.P. 4 Nos., Impeller P.P. 4 Nos., Rotor end welding Turning & Polishing & Key way making 1 Job, Labour Charges 1 Job.
Repair and Rewinding of 5 HP 4” Dia skope make sub. Pump set no. – M-436By carrying out following works: Providing of Rewinding kit for Motor 1 Set, Impeller P.P. 4 Nos., Stage Bowls P.P. 3 Nos., Rotor Sleeve Turning & Polishing 1 Job, Epoxy Paint for Rotor 1 Job, Labour Charges 1 Job.
Repair and rewinding of 5 HP 4” Dia Skope make sub. Pump set no. – M-438By carrying out following works: Providing of Rewinding kit for Motor 1 Set., Cable 2.5 sq mm 5 Mtrs., Stage Bowls P.P. 4 Nos., Impeller P.P. 3 Nos., Rotor Sleeve Turning & Polishing 1 Job, Labour Charges 1 Job.
Repair and rewinding of 5 HP 4” Dia Skope make sub. Pump set no. – M-440 By carrying out following works: Providing of Rewinding kit for Motor 1 Set., Cable 2.5 sq mm 5 Mtrs., Impeller P.P. 3 Nos., Stage Bowls P.P. 3 Nos., Rotor end welding Turning & Polishing & key way making 1 Job, Shaft Stationing 1 Job., Stamping Repairing 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – M-401 By carrying out following works: Providing of Rewinding kit for Motor 1 Set., Bearing Bush 2 Nos., Cable 2.5 sq mm 7 Mtrs., Thrust Plate 1 Nos., Distance Bush 3 Nos., Rotor end welding Turning & Polishing & Key way making 1 Job, Shaft Stationing 1 Job, Stamping Repairing 1 Job., Balancing of Rotor 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – M-404 By carrying out following works: Providing of Rewinding kit for Motor 1 Set., Water Seals 2 Nos., Bearing Bush 2 Nos., Distance Bush 5 Nos., Guide Bush 5 Nos., Rotor end welding Turning & Polishing & Key way making 1 Job, Stamping Repairing 1 Job, Thrust Plate Repairing 1 Job., Epoxy Paint for Rotor 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – M-406 By carrying out following works: Providing of Rewinding kit for Motor 1 Set., Bearing Bush 2 Nos., Cable 2.5 sq mm 7 Mtrs., Guide Bush 6 Nos., Distance Bush 4 Nos., Balancing of Rotor 1 job., Housing Repairing 1 Job., Thrust Bearing Repairing 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – M-408By carrying out following works: Providing of Rewinding kit for Motor 1 Set., Bearing Bush 2 Nos., Water Seals 2 Nos., Distance Bush 5 Nos., Neck Rings 6 Nos., Rotor end welding Turning & Polishing & Key way making 1 Job., Shaft Stationing 1 Job., N.R.V. Repairing 1 Job, Balancing of Rotor 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – M-409By carrying out following works: Providing of Rewinding kit for Motor 1 Set., Bearing Bush 2 Nos., Neck Rings 5 Nos., Rotor end welding turning & Polishing & Key way making 1 Job, Thrust Plate Repairing 1 Job., Stamping Repairing 1 Job., Epoxy Paint for Rotor 1 Job., Shaft Stationing 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – M-411By carrying out following works: Providing of Rewinding kit for Motor 1 Set., Cable 2.5 sq mm 7 Mtrs., Water Seals 2 Nos., Neck Rings 6 Nos., Guide bush 5 Nos., Rotor end welding Turning & Polishing & key way making 1 Job, Stamping Repairing 1 Job., Balancing of Rotor 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – M-412By carrying out following works: Providing of Rewinding kit for Motor 1 Set., Cable 2.5 sq mm 7 Mtrs., Water Seals 2 Nos., Neck Rings 2 Nos., Guide Bush 5 Nos., Rotor Sleeve Turning & Polishing 1 Job., Motor Base Repairing 1 Job., N.R.V. Repairing 1 Job., Stamping Repairing 1 Job., Impeller Rematling & Turning 1 Job., Epoxy Paint for Rotor 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – M-415By carrying out following works: Providing of Rewinding kit for Motor 1 Set., Cable 2.5 sq mm 7 Mtrs., Distance Bush 7 Nos., Guide Bush 5 Nos., Rotor Sleeve Turning & Polishing 1 Job, Stamping Repairing 1 Job., Balancing of Rotor 1 Job., N.R.V. Repairing 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – M-418By carrying out following works: Providing of Rewinding kit for Motor 1 Set., Bearing Bush 2 Nos., Connection Piece 1 No., Neck Rings 3 Nos., Guide Bush 5 Nos., Rotor end welding Turning & Polishing & Key way making 1 Job, Epoxy Paint for Rotor 1 Job., Impeller Rematling & Turning 3 Job., Shaft Stationing 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – M-421By carrying out following works: Providing of Rewinding kit for Motor 1 Set., Water Seals 2 Nos., Cable 2.5 sq mm 7 Mtrs., Guide Bush 5 Nos., Distance Bush 5 Nos., Rotor end welding Turning & Polishing & Key way making 1 Job, Stamping Repairing 1 Job., Thrust Bearing Repairing 1 Job., Balancing of Rotor 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – M-424 By carrying out following works: Providing of Rewinding kit for Motor 1 Set., Cable 2.5 sq mm 7 Mtrs., Guide Bush 3 Nos., Distance Bush 5 Nos., Rotor Sleeve Turning & Polishing 1 Job., Stamping Repairing 1 Job., N.R.V. Repairing 1 Job., Balancing of Rotor 1 Job., Housing Repairing 1 Job., Epoxy Paint for Rotor 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – M-429By carrying out following works: Providing of Rewinding kit for Motor 1 Set., Bearing Bush 2 Nos., Water Seals 2 Nos., Cable 2.5 sq mm 7 Mtrs., Guide bush 3 Nos., Neck Rings 4 Nos., Rotor end welding Turning & Polishing & Key way making 1 Job, Balancing of Rotor 1 jobs., Shaft Stationing 1 Job., Epoxy Paint for Rotor 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – M-432By carrying out following works: Providing of Rewinding kit for Motor 1 Set., Cable 2.5 sq mm 7 Mtrs., Guide Bush 4 Nos., Distance bush 6 Nos., Rotor end welding turning/Polishing & key way Making 1 Job, Stamping Repairing 1 Job., Thrust Bearing Repairing 1 Job., Balancing of Rotor 1 Job., Labour Charges 1 Job.
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – M-434By carrying out following works: Providing of Rewinding kit for Motor 1 Set., Cable 2.5 sq mm 7 Mtrs., Guide Bush 5 Nos., Distance Bush 3 Nos., Neck Rings 5 Nos., Balancing of Rotor 1 Job., Motor Base Repairing 1 Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – M-439 By carrying out following works: Providing of Rewinding kit for Motor 1 Set., G.M. Bearing Bush 2 Nos., Distance Bush 5 Nos., Guide Bush 5 Nos., Rotor end welding Turning & Polishing & key way making 1 Jobs., Stamping Repiaring 1 Job., Thrust Plate Repairing Job., Shaft Stationing 1 Job., Epoxy Paint for Rotor 1Job., Labour Charges 1 Job
Repair and rewinding of 7.5 HP Skope make sub. Pump set no. – M-454By carrying out following works: Providing of Rewinding kit for Motor 1 Set., Cable 2.5 sq mm 7 Mtrs., Water Seals Nos., Distance Bush 5 Nos., Guide Bush 7 Nos., Rotor Sleeve Turning & Polishing 1 Job, Stamping Repairing 1 Job, Epoxy Paint for Rotor 1 Job., Labour Charges 1 Job
Sharma Engineering Enterprises
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .