KMC/DG(WS)/MGPS/08/2025-26

SUPPLY,DELIVERY,TESTING AND COMMISSIONING OF KBL MAKE SUBMERSIBLE DEWATERING PUMP HAVING HEAD 20M,DISCHARGE OF PUMP 396LPM, 2900RMP, VOLTAGE-440V AND MOTOR RATING 5HP/3.7KW.

SUPPLY,DELIVRY,TESTING AND COMMISSIONING 10 HP CAPACITY SUBMERSIBLE SLURRY PUMP, DISCHARGE NOT LESS THAN 118 METER CUBE PER HOUR , VOLTAGE 415?10%V,3 PHASE ,FREQUENCY 50?3%HZ,CABLE LENGTH 10MTRS,MINIMUM HEAD NOT LESS THAN 10MTRS .IP:68 OF(KSB / KIRLOSKAR / MODY / WPIL / KISHORE ) MAKE

SUPPLYING OF 1.1 KV. GRADE PVC INSULATED CONDUCTOR OF FOLLOWING CABLES (MAKE: POLYCAB/ GLOSTER/HAVELLS/):SIZE IN SQ. MM, NO & DIA. OF WIRE IN MM , NO OF CORE - 16 7/1.70 4

SUPPLYING OF 1.1 KV. GRADE PVC INSULATED CONDUCTOR OF FOLLOWING CABLES (MAKE: POLYCAB/ GLOSTER/HAVELLS/):SIZE IN SQ. MM, NO & DIA. OF WIRE IN MM , NO OF CORE - 25 7/2.24 4

SUPPLY & DELIVERY OF THE FOLLOWING 50 HZ, AC, DIRECT ON LINE STARTER OF CONTINUOUS DUTY IN SHEET STEEL ENCLOSURE (MAKE L&T/ABB/SCHNEIDER): 10 HPTHREE PHASE (MAX. RELAY RANGE 15-25 AMP)

SUPPLY & DELIVERY OF THE FOLLOWING 50 HZ, AC, DIRECT ON LINE STARTER OF CONTINUOUS DUTY IN SHEET STEEL ENCLOSURE (MAKE L&T/ABB/SCHNEIDER):7.5 HP THREE PHASE (MAX. RELAY RANGE 20-32 AMP)

SUPPLYING AND FIXING MCCB SS ENCLOSURE WITH IP- 20/30 PROTECTION, PWDER COATED PROVISION FOR HOUSING FOUR POLE (4P) MCCB, CONCEALED IN WALL AFTER CUTTING THE WALL & MENDING GOOD THE DAMAGES TO ORIGINAL FINISH / ON FLAT IRON FRAME INCL. PAINTING, CONNECTION & PROVISION FOR EARTHING ATTACHMENT HAVELLS (A FRAME)

SUPPLYING AND FIXING 240/415 V MCB OF BREAKING CAPACITY 10KA & C CHARACTERISTICS ON DIN RAIL OF EXISTING DBS AND NECESSARY CONNECTION HAVELLS TPN 63 A

LAYING THROUGH RCC/HUME/GI PIPE.(A)LAYING ONLY CABLE UPTO 50 SQMM THROUGH EXISTING RCC/HUME/ GI PIPE/OPEN MASONARY TRENCH FOR SINGLE, 2, 3, 3... & 4 CORE

SYPPLY OF E.R.W.M.S.(ELECTRICAL RESISTANT WELDED M.S.) BLACK PIPE OF OF TATA MAKE (HEAVY QUALITY) AS PER STANDARD SPECIFICATION, 5 MM THICK. (I) 100 MM DIA. (INTERNAL) N.B. THE RATES FOR SUPPLY OF NON TATA BUT I.S.I. MARKED G.I. PIPES AND FITTINGS WILL BE ARRIVED AT BY REDUCING THE CORRESPONDING RATES FOR TATA PIPES AND FITTINGS BY 20%.

SUPPLY OF G. I. PIPES OF TATA MAKE INCLUDING NECESSARY SOCKETS (C) 25 MM DIA. (II) MEDIUM QUALITY

LABOUR RATES PER DIEM : SANTRAS

ORDINARY CEMENT CONCRETE (MIX 1:2:4) WITH GRADED STONE CHIPS (6MM NOMINAL SIZE) EXCLUDING SHUTTERING AND REINFORCEMENT,IF ANY, IN GOUND FLOOR AS PER RELEVANT IS CODES. PAKUR VARIETY?

SUPPLY OF M.S. FLANGE (SLIPPER TYPE) AS PER IS-6392 TABLE 17 THICKNESS 12MM NB DIAMETER IN MM 200

CUTTING TO REQUISITE LENGTH OR SHAPE DEPARTMENTAL R.S. JOISTS,CHANNELS, ANGLES, TEES, PLATES ETC.

WELDING IN M.S. STRUCTURAL WORK WITH GAS OR ELECTRIC: (A) TACK WELD

WELDING IN M.S. STRUCTURAL WORK WITH GAS OR ELECTRIC: (A) CONTINUOUS WELD

DRILLING HOLES OF REQUISITE DIAMETER IN R.S. JOISTS CHANNELS, TEES.PLATES ETC. (A) (II) EXTRA FOR DRILLING BEYOND DEPTH OF 10MM

SUPPLY OF FLAT RUBBER GASKET OF EPDM QUALITY WITH ISI MARK TO IS: 5382/1985 TYPE-4 SUITABLE FOR FLANGE JOINT, DRILLED TO IS: 1538 (TABLE ... VI). THE GASKET SHOULD HAVE DUAL THICKNESS 3/6MM WITH 6 MM THICKNESS AT THE SEALING CROSS SECTION.200MM DIA

Sub Total

Please Enable Macros to View BoQ information