Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.8 LAccepted-AOC COLABA MUMBAI | YAVATMAL | MAHARASHTRA | 445001 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹16.1 L+₹27,532 (1.74%)Rejected-AOC COLABA MUMBAI | L2 | Rejected-AOC Not accepted | |
| 3 | L3₹18.4 L+₹2.6 L (16.5%)Rejected-AOC COLABA MUMBAI | L3 | Rejected-AOC Not accepted | |
| 4 | Rejected-Technical | - | Rejected-Technical Not Eligible for financial opening |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
11 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer North Mumbai
Garrison Engineer North Mumbai Military Engineer Services Santacruz East, Mumbai 400029
Replacement of goods lift 01 No against BER in P-1 bldg at DGQA complex, Vikhroli under GE North Mumbai
2023_MES_578744_1
8120/E8
Open Tender
Electrical and Maintenance Works
Item Rate
545 days
Garrison Engineer North Mumbai
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
Garrison Engineer North Mumbai
₹40,000
Yes
27 Mar 2023
2 Feb 2023
13 Mar 2023
2 Feb 2023
11 Mar 2023
25 Feb 2023
3 Feb 2023 - 24 Feb 2023
Amount
Dismantling carefully and taking down of old BER Goods Lift from the existing lift well of 500kg complete with all accessories, control panels etc and deposit the same to AGE E/M store yard or as directed and making good the disturbed surfaces of wall/floor/celling etc and necessary civil works for installation of new lifts etc complete all as directed.
Make & Type : Traction Gearless with Machine room Type of lift : Goods cum Passangers lift Load capacity : 500/544 Kg / 08 Passenger including operator Speed : 1.0 Meter per second Power Supply : 415 Volts, 3 Phase AC, 50 Hz Type of drive : AC variable voltage & variable frequency (VVVF) Type of machine : Gearless permanent magnet synchronous motor ( including suitable capacity of electrical cabling FRLS with PVC conduits of suitable size and control & MCB/ MCCB). Car size : 1300 mm wide X 1100 mm depth x 2200 mm height (or as per existing size) OR (AS PER IS not less than 1.43 sq.m area) Shaft size : 1800 mm wide x 1600 mm depth (or as per existing size) OR (AS PER OEM) Car and landing doors : centre opening , sliding type, stainless steel hair line finish for car and landing at all floor.
Car Enclosures : Standard manufacturing with MS Sheet Platform & Stainless steel, hairline finish paneling of 1.5 mm thick, with light fitting LED type ceiling light of 05 watts, Cabin Fan 300mm sweep with auto start function ( incl wiring with suitable stranded copper conductor cable FRLS), stainless steel false ceiling of 1.2 mm thick, mirror finish, stainless steel hand rail, mirror etc. Terminal buffers : Special spring buffers as per manufacturer's design. Door opening : 800 mm wide x 2000 mm height clear opening (or as per existing size) (or as per OEM only) Flooring : Aluminium chequered sheet flooring 5 mm thick(Standard pattern) as per existing cabin size Or (As per OEM) Signal System : (a) Combined luminous hall push button with (LED) TFT hall position indicators with stainless steel hairline face plate at all floors (b) LED Car position indicator in car and over load warning in the car. (c) One No. car operating panel with stainless steel hairline with etched borders and luminious button in car. (d) Car direction indicator in car and landing. (e) Battery operated Alarm bell and Emergency light along with inverter of suitable capacity having power back up for a period of minimum 1/2 hour( 30 minutes). (f) Fireman switch at ground floor (g) All signal fixture & COP will have stainless steel face plate. (h) Infra red sensor sorting edge of edge of door for entire height (j) Bult in announcing system without hand set.
Car indicator : Shall be proivided with audio announcing system with music. Stop and Opening : 04 Stops and 04 Openings all on the same side. Emergency services : (a) Automatic Rescue Devices (ARD), to be operating with maintenace free batteries to bring the car to the nearest floor level and auto opening for evacuation of passengers in the event of power failure (b) Overload Relays, Contactor and Fuses, Electrical terminals of high quality, Limit switch with accessories on each floor, Gravity Counter weight as well as over hoisting/ over lowering limit switches for top most position and Phase sequence corrector, (c) Fire emergency operation (d) Emergency operation for power failure (e) Earthquathquake emergency operation.
Civil Works : MS Structural work & Plates etc grouting complete with bolts and nuts and including RCC / PCC foundation, dismentling old machine beam, earthing , aluminium strip and reconstruction machine beam , old U/S cable, machine , panel and good make distrubed floor plastering, wall plastering where removing old unserviceable cable , machine , panel etc and reconnect the all earthing aluminum strip with all electric/ mechanical connections. Electrical work : Machine room new wiring as existing site incl all fittings /fixture with new PVC casing / caping & point wiring for tube lighting, socket , exhaust fan point, will be done by the contractor at time of new lift install and before completion of site work incl provn of switch /socket /iron box /sheet/screws etc ceilingrose or as per existing only, remove debries / old unserviceable item/machine/ old cables and from machine room area will be cleaned before handing over the lift and all work cost included in lift cost , no extra payment will be given by the Department complete all as directed by Engr -in-Charge
Comprehensive Maintenance of Electrically Operated Goods Lift after successful completion of work under Phase – I as described in these Tender Documents. NOTE: (i) Contractor should keep the lift functional by repairing/replacing [as decided by GE] the components during the defects liability period. Make : (i) Kone India / Schinder India Pvt Ltd / Hitachi Lifts India Pvt Ltd / Mitubishi Elevator India Pvt Ltd / OTIS Elevator Company India Ltd / Thyssenkrupp Elevator India Pvt Ltd / Escon Elevators Pvt Ltd (ii) The make shall be approved by Accepting Officer with considering criteria as specified in Paricular Specifications
Material and labour for earthing complete with Galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of earth the plate not less than 1.5 metres below normal ground level, connected to plate with GI earth strip of size 32 x 6mm, 7.5 m long from earth point to test point and other end connected to control board / panel / equipment, laid under floors/plinths or fixed on walls or concealed in wall etc by means of bolts, nuts, check nuts and washers made out of galvanised iron or steel with provision of charcoal & common salt packed upto minimum 150 mm all around the earth plate and protected by 40 mm bore light grade galvanised iron pipe complete all as shown in electrical plate No.3 of MES schedule Part I, 2009 with PCC pit in PCC 1:2:4 type B1 using 20 mm graded stone aggregate, MS angle iron frame of size 50mm x 50mm x 5mm, cast iron cover with locking arrangements, GI 20 mm bore medium grade pipe and CI funnel with wire mesh for watering arrangement including necessary excavation and earth work in any type of soil/strata & testing complete all as specified and as directed by Engineer-in-Charge.
Material and labour for earth continuity conductor or main earthing strip 32 x 6 mm dia Galvanised Iron strip fixed to wall on batten or recessed or buried in ground or drawn in and including medium grade PVC pipe all as required at site complete all as specified and as directed.
Monarch Enterprises
Veer High Tech Solution
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .