PROVN OF CERTAIN B/R AND E/M WORKS IN VARIOUS LOCATIONS AT DIPATOLI MIL STATION

Amount

Excavation in trenches n.exc 1.5m deep & n.exc 1.5m wide on plan in soft/loose soil and getting out complete all as specified and as directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exc 25cm thick in soft/loose soil complete all as specified and as directed.

Removing excavated material n.exc 50 M and depositing where directed at a level n.exc 1.5 M above from starting point complete all as specified and as directed.

M&L for PCC (1:5:10) type E2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar (1:6) complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and as directed.

M&L for damp proof course 40 mm thick in PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) to horizontal or vertical surface complete all as specified and as directed.

M&L for RCC (nominal mix), (1:1.5:3), type B-1, (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns, and in shelves and the like complete all as specified and as directed.

M&L RCC (nominal mix) (1:1.5:3) type B1 (using 20mm graded stone aggregates) as in beams, cantilevers, lintels over 1.5 m span complete all as specified and as directed.

S&F MS TMT steel bars 10mm dia and over cut to length, bent to shape as required, incluing cranking, bending and binding with MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

S&F MS TMT steel bars 6mm to 8mm dia and over cut to length, bent to shape as required. incluing cranking, bending and binding with MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for use and waste form work to soffits of rough finished flat surfaces of concrete suspended slabs such as roof slab, floor slab not exc 200 mm thick complete all as specified and as directed.

M&L for use and waste of form work to edges of rough finished surfaces of concrete flats, treads, breaks in floors, window cills, concrete railings, opening in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide complete all as specified and as directed.

M&L for use and waste of form work to rough finished flat surfaces of concrete sides and soffits of beam, lintels, shelves etc complete all as specified and as directed.

M&L for 25mm thick PCC (1:2:4) type B1 (using 20mm graded stone aggregates) as in floor complete all as specified and as directed.

M&L for 75mm thick PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in sub base of floors complete all as specified and as directed.

M&L 15mm thick screed bed or bedding layer of cement mortar (1:6) for laying floor finishes complete all as specified and as directed.

M&L for non skid ceramic coloured tiles jointless of size (400mmx400mm)x7 mm thick as in floors etc, set and jointed in neat cement slurry and pointed in white cement to match the existing complete all as specified and as directed.

M&L for rendering 15mm thick on brick wall or concrete surface in cement mortar (1:4), surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick on brick wall or concrete surface in cement mortar (1:6), finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 10mm thick on brick wall or concrete surface in cement mortar (1:4) for wall tiles complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size (300mmx200mm)x6-7mm thick on vertical surfaces such as in skirting, dados, risers steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surfaces complete all as specified and directed.

M&L for rendering 10mm thick on concrete surface as in ceiling in cement mortar (1:3), surface finished even and fair without using extra cement complete all as specified and as directed.

M&L for applying three coats of white wash on newly plastered wall surface including preperation of the surface complete all as specified and directed.

S&F 15mm bore pillar cock cast copper alloy, chromium plated, fancy type, screwed down complete all as specified and as directed.

M&L for applying three coats of white wash on newly plastered ceiling surface including preperation of the surface complete all as specified and as directed.

M&L for preparation of new plastered or unplastered surfaces and applying two coats of cement base paint over a coat of primer on walls complete all as specified and as directed.

M&L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer to steel and iron surface exc 10 cm width or girth complete all as specified and as directed.

S&F hold fasts etc conforming to Fe 290 Gde E 165 or Fe 310-0 complete all as specified and as directed.

S&F medium grade galvanised steel tubing with all GI fittings fixed to wall or laid in floors for 15 mm bore GI tubing complete all as specified and as directed.

S&F medium grade galvanised steel tubing with all GI fittings fixed to wall or laid in floors for 20 mm bore GI tubing complete all as specified and as directed.

S&F 15 mm dia bore bib taps fancy type cast copper alloy, chromium plated with crutch or butterfly handle screwed down for iron pipe or brass ferrule and fixed complete all as specified and as directed.

S&F 15 mm dia bore angle cock cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F 15 mm dia bore stop valves (concealed type) CP cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or unions fixed complete all as specified and as directed.

S&F 15 mm dia bore PVC connections with PTMT nuts of length 450 mm long complete all as specified and as directed.

S&F of 75 mm dia. PVC floor trap /nahani trap with grating including joining to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S & F gun metal globe or gate valve with iron wheel screwed both edns for iron pipe of 20 mm dia complete all as specified and directed by Engineer-In- Charge.

S&F ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia complete all as specified and directed.

S&F 500 ltr capacity double layered rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I, with and including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe, GI overflow pipe, GI washout pipe and fixed complete all as specified and as directed.

S&F factory made solid PVC door frame of size (50mmx47mm) made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete as per manufacturer specification & drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (stiles) consisting of frame made out of mild steel tubes for top & bottom rails. Mild steel frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm with stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap inserted for top rail and botttom rail, panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement fixing in the frame at site as per specification ,drawing complete all as specified and directed by Engr - in - Charge.

S&F 100 mm size butt hinges extruded aluminium alloy with galvanized mild steel hinge pin, anodized and fixed type B-22 complete all as specified and as directed.

S&F 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

S&F aluminium alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet,cast extruded section & fixing bolts & sliding bolts of extruded section on 200 mm long complete all as specified and as directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and as directed.

M&L for hard core of guage n exc 63mm, deposited, spread and leveled in layers n exc 15 cm thick with broken stone boulders watered and well rammed to a true surface complete all as specified and as directed.

M&L for 75 mm thick PCC (1:3:6) type C-2 using 40 mm graded stone agregate as in plinth protection /path & finishing even and fair without using extra cement complete all as specified and as directed.

M&L for vitreous china urinal bowl type of size (465 x 355 x 265) mm with and including cast copper alloy CP waste coupling and PTMT waste pipe of suitable size complete all as specified and as directed.

S&F 3mm thick figured glass or pin headed type and glazing with oil putty in squares n.exc. 0.5 sqm in each pane complete all as specified and as directed.

S&F 125mm size aluminium handles cast type anodised complete all as specified and as directed.

S&F PVC (SWR) bends any radius of 75mm bore complete all as specified and directed.

S&F towel rail 600mm long 20mm dia PTMT fixed with an including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S&F CP glass self assembly consisting of 5.5mm thick sheet glass self 12cm wide with chromium plated bracket guard and railing 60cm long fixed with chromium plated brass screws complete all as specified and as directed.

S&F PVC (SWR) pipe single socketed in any length with rubber ring joints in trenches or in wall/floor 110mm bore complete all as specified and as directed.

S&F PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall of 75mm dia complete all as specified and directed.

S&F PVC (SWR) Bends any radius of 110 mm dia complete all as specified and directed.

S&F brass chromium plated shower rose with or without swivel joints 125 mm size complete all as specified and as directed.

S&F vitreous china wash down water closet pan (pedastral pattern) white including white PVC sheet cover and necessary fitment and jointing to flush pipe fixing bolts, traps complete all as specified and directed.

Supply only PVC low level cistern capacity 10 ltrs including flush pipe, float valve syphonic etc including 32mm dia PVC flush pipe of reqiured length and 15mm PVC connection exc 450 mm long with PTMT nut and washeres and connection including two Nos PVC brackets complete all as specified and as directed.

S&F in repairs vitreous china wash basin white, flat back of size (550x400)mm with and including CP pillar tap fancy type 15mm bore, 32mm dia CP waste coupling, PVC waste pipe of suitable size and PTMT PVE connections 450mm lomg complete all as specified and as directed.

S&F PVC waste pipe for Wash Hand basin 32mm x 60cm long complete all as specified and as directed.

S&F CP waste coupling 32mm bore for wash hand, basins complete all as specified and as directed.

M&L for roof treatment in repair by complete removel of existing old treatment and treated with following specifications :- (a) Brushing neat cement slurry @0.3Kg per Sqm on roof slab. (b) 15 mm thick cement plaster fair finished using cement ortar (1:4) with WPC on roof slab. (c) Applying oil based bitumen primer @ 0.30 ltr/Sqm on plastered surface. (d) Applying water proofing membrane not less than 4.00 kg/sqm in weight, sealing by torch application as directed at site with 100 mm over laps as per manufacture's instruction. (e) Applying one coat of aluminium paint @200 gm/Sqm over bituminous surface of membrane. Note : Supply only WPC shall be measured and paid separately under relevant item.

Supply only integral water proofing compound complete all as specified and as directed.

M&L for roughing surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3.0 kg of cement per Sqm. complete all as specified and directed.

M&L for non skid ceramic coloured tiles jointless of size (300mmx300mm)x7 mm thick as in floors etc, set and jointed in neat cement slurry and pointed in white cement to match the existing complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

Taking down GI tubing and connectons including removing to store of 15mm dia complete all as secified and as directed.

Taking down GI tubing and connectons including removing to store of 20mm dia complete all as secified and as directed.

Supplied and fixed GI tubing 15 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors all as specified and directed

Supplied and fixed GI tubing 20 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors all as specified and directed

S&F 15mm dia bore stop valves CP cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or unions fixed complete all as specified and as directed.

S&F 20mm dia bore stop valves CP cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or unions fixed complete all as specified and as directed.

Supply and fixing in repair vitreous china squatting pan 'Orrissa pattern' size (580x440)mm white with integral foot rests any pattern including provn of cement concrete bedding and making connecton with flushing pipe etc including flushing pipe, flushing bend etcbut excluding connecton to cistern complete, including CI 'P' trap with lead joint complete all as specified and as directed.

Taking down eaves, gutters and rain water pipes (any size or pattern) including all fittings or accessories complete all as specified and as directed.

Supplied and fixed PVC (SWR) 110 mm dia juncton, single (single 'T') equal or unequal complete all as specified and directed.

Excavation in post holes or similar holes n exc 05 cum each in soft/ loose soil, getting out, returning, filling in and ramming with earth or broken rubble around, in layers not exc 25 cm thick, watering etc and removing surplus soil to 50 m distance and making good surface complete all as specified and directed.

M& L for PCC (1:3:6) type C2 (using 40 mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410-w or E -250 quality A complete all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St- 240 complete all as specified and directed.

Supplied and fixed mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the eother, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut 5-10 mm dia of neck and n exc 5cm long, complete all as specified and directed.

S&F Pre-painted galvalume aluminum zink coating GI based corrugated steel sheet 0.45 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

M&L for 40mm thick PCC (1:2:4), type B-1 (using 20mm graded stone aggregate) in alternate panels, finished even and smooth with using extra cement as in floor complete all as specified and directed.

S&F glass dividing strips 38mm wide and 3mm thick inserted in position conforming to design in PCC floor of item No.8 complete all as specified and directed.

S&F Utensil rack of stainless steel, 1mm thick for kitchen or laboratory, overall size (1200x900x250) mm, fixed with plugs and washers on wall complete all as specified and as directed. Make:- Prayag, Jain Brothers Sanitary Pvt Ltd, Hindustan, Blue Star.

S&F MS TMT steel bars 6mm to 8mm dia and over cut to length, bent to shape as required. incluing cranking, bending and binding with MS wire (annealed) not less than 0.9mm dia or securing with clips as in stirrup complete all as specified and as directed.

M&L for Moorum/ red bajri filling in floors or pavings, laid in floors n.exc 15cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

M&L for machine cut kota stone slab flooring 18-20 mm thick, set over and including 15mm thick screed base in CM (1:6), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with bee wax polishing complete all as specified and as directed.

Description all as per srl item No 90 here-in-before but as in skirting set over and including 10mm thick cement plaster in CM 1:6 complete all as specified and as directed.

Surface dressing in soft/loose soil n exc 15 cm deep trimming of natural ground (removing vegetation/shurbs/ brushwood) undergrowth and carring away rubbish to a distance of 50 metre complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off premises etc complete all as specified and as directed.

Demolition of brick/stone works masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and pre-cast concrete articles complete all as specified and as directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) area not exceeding 1.5 Sqm each and refixing in other opening complete all as specified and as directed.

M&L for light shade vitrified ceramic tiles 10mm thick (square/rectangular) double charged, polished, area of each tiles n.exc 0.36 sqm with and including over 15mm thick screed bed in CM (1:6) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for light shade vitrified ceramic tiles 10mm thick (square/rectangular) double charged, polished, area of each tiles n.exc 0.36 sqm with and including over 10mm thick plaster in CM (1:4) as in skirting/dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for rendering 15mm thick on other than fair faces of brick wall or concrete surface in cement mortar (1:4), surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparing new surfaces and applying two coats of distember oil emulsion white or tinted over a coat of primer on walls complete all as specified and as directed.

S&F air termination single pointed aluminium rod 12 mm dia 300 mm long with suitable nut, bolts, screws, & washers complete all as specified and as directed.

S&F porcelain insulators of size 75 mm height and 25 mm width for fixing of aluminium and GI strip with suitable nut, bolts and washers complete all as specified and directed.

S&F bakelite insulator sheet of size 100 mm x 100 mm x 12 mm thick for fixing of air termination with suitable nut, bolts and washers complete all as specified and directed by Eng-in-Charge

S&F medium grade GI tubing 40 mm bore for fixing of air termination single pointed aluminium rod with necessary clamps, nuts, bolts and washers including silver painting over the surfaces of all rusted metallic surfaces complete all as specified and directed.

M&L for test point terminal block made of gun metal or phosphores bronze size (75x75x25)mm, drilled and screwed including 3 Nos, 8 mm dia 25 mm long hexagonal head screw complete all as specified and directed.

Material and labour for earthing complete of copper plate of size (30 cm x 30 cm) x 3mm thick buried directly in ground vertically to depth not less than 2.25 mtr below ground level with top edge of the plate not less than 1.5 mtr below ground level connected to copper strip of size (25mm x 3mm) by means of bolts, nuts, check nuts and washers, with copper strip up to 7.5 mtr, excavation and earth work filling of charcoal and salt mixture 150 mm all around the plate watering arrangement with 20 mm GI medium grade pipe, 40mm dia medium grade GI protection pipe including PCC pit with cover, funnel and wire mesh complete all as specified and directed.

M&L for copper strip of size (32x6) mm with saddles and fixing screws etc for roof conductors and down conductors above ground or in ground complete all as specified and as directed.

M & L for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in foundation of Poles and filling and mass concrete etc, including formwork (as if required), complete all as specified and as directed.

M & L for PCC (1:3:6) type C1 using 20mm graded stone aggregate as in coping complete with necessary use and waste of form work complete all as specified and as directed.

M&L for point wiring for one exhaust fan point controlled by one five amps one way single pole switch complete with 1.5 sqmm, single core, multi stranded copper conductor PVC insulated and unsheathed FR cable 1100 Volts grade, drawn through PVC concealed conduit pipe med grdae 20/25 mm on wall/ceiling, including replacement by new 3 mm thick phenolic laminated sheet top covers and sunk type CI/steel terminal boxes 1.6 mm thick, chromium plated screw /Modular plate with frame and modular concealed GI sheet metal boxes ( 16 Gauge) as suitable size for mounting of switch & scoket including 1.5 sqmm size pvc insulated unsheathed copper conductor to common earth and connecting to earth dolly complete all as specified and directed. Note: The rate quoted is deemed to be included for Penolic sheet (Hylem) and concealed GI sheet metal boxes, modular plate with frame, cutting of hylem sheet for fixing of switch and scoket including cutting chases etc in wall and making good to disturbed surface and matching with existing wall, ceiling surfaces.

S&F switch piano type, SP, one way, flush type 5 Amps complete all as specified and directed.

S&F ceiling roses, 65 x 50 mm, three terminals complete all as specified and directed.

S&F exhaust fan assembly of 300mm sweep, 210 volts, low noise operation, metalic body with front protection guard/lower grill suitable for toilet, bath/ kitchen complete all as specified and as directed. Make-Havells Cat Part No. Turbo Force or equivalent as per list of makes.

S&F in repair of distribution board TPN double door with IP43 protection, 4 way with 200A rated bus bar 415 volts (8+12 moduls) complete all as specified and as directed. Make:- Cat no-811841 of Make IndoAsian or equvelent as per list makes.

S&F in repair of sheet metal enclosure for DB's, Single phase and neutral 8 way double door with 200A rated bus bar 210 volts (12 moduls) complete all as specified all as directed. Cat no - 811817 of Make:-IndoAsian or equvelent as per list of makes.

SSupply & fixing in repair of sheet metal enclosure for DB's, Single phase and neutral 12 way double door with 200A rated bus bar 210 volts (12 moduls) complete all as specified all as specified. Make:- Cat no-811819 of Make:-Indo Asian or equvelent as per list of makes.

S&F RCCB 4 Pole 63 amps (100mA) 415 Volts complete all as specified and as directed.

S&F isolator SPN 40 amps 210 Volt complete all as specified and as directed.

S&F MCB SPN 32 Amp, 230 Volt complete all as specified and as directed.

S&F MCB SP 6 to 32 Amps 'B' series 230 Volt complete all as specified and as directed.

M&L for sub main wiring of 4 sqmm 2 single core copper conductor multistranded PVC insulated and unsheatahed cable drawn through and including MS conduit fixed on surface to wall/ceiling by means of MS screws and saddles and PVC insulated and unsheathed solid copper conductor 4.0 sqmm as earth continuity conductor duly connected to earth dolly/main switch complete all as specified and as directed. Note:- (i) All three wire (Phase red colour, neutral black colour and earth wire green colour) should be run through for each individual circuit from the DBs. (ii) painting over surface conduit to be done to match with walls/ceiling existing surfaces. (iii) Two run of wire (phase & neutral) and one run of wire (earth conductor) and MS Consuit shall be measured as one length.

M&L sub main wiring of 6 Sqmm 2 single core copper conductor multistranded PVC insulated and unsheatahed cable drawn through and including MS conduit fixed on surface to wall/ceiling by means of MS screws and saddles and PVC insulated and unsheathed solid copper conductor 6.00 sqmm as earth continuity conductor duly connected to earth dolly/main switch all as directed. Note:- (i) All three wire (Phase red colour, neutral black colour and earth wire green colour) should be run through for each individual circuit from the DBs. (ii) painting over surface conduit to be done to match with walls/ceiling existing surfaces. (iii) Two run of wire (phase & neutral) and one run of wire (earth conductor) and MS Consuit shall be measured as one length.

S&F Wall mounted fan assembly of 400 mm Sweep 210 volts, noice operation, metallic body with complete accessories & energy efficient complete all as specified and as directed. Make:- Model Swing of make Havells or equivalent of makes Bajaj / USHA / Khaitan / Almonard.

S &F ceiling fan 1200mm sweep BEE 5 star rated single phase AC energy saving with Fan hook, clamp, necessary nuts, bolts, washer and suitable length mild steel down rod duly making holes etc complete as per manufacture specification. Make : Havells model ES-50 premium plus/usha vetra plus or equivalent of makes Khaitan / Crompton / USHA / Bajaj.

S&F pressure die cast aluminium alloy housing LED street light fittings 60 Watt capacity, IP 66 protection with and including GI bracket made out of 40mm bore light grade GI pipe including two Nos GI clamps, nuts, bolts, washer etc and connection from junction box / overhead lines with 1.5sqmm 2 run and one run earth wire complete all as specified and as directed. Make:- Crompton Cat Part No. LSTP-60-CDL-M or equivalent as per list of makes.

S&F cable three core PVC insulated unsheathed multistranded copper conductor of size 1.5 Sq mm complete all as directed by Engineer-in-Charge.

S&F in replacement change over switch on load type 4 pole 100 Amp, 415 V, 50 Hz by addition/alteration to existing panel board including making all electrical connections with all materials required at site complete all as specified and as directed.

S&F in replacement change over switch on load type 4 pole 200 Amp, 415 V, 50 Hz by addition/alteration to existing panel board including making all electrical connections with all materials required at site complete all as specified and as directed.

Supply, laying, jointing, testing and commissioning XLPE insulated, armoured, heavy duty, LT UG cable with aluminium conductor, 1100 volts grade cross sectional area 25 sqmm 4 core connected with aluminium lugs connected by cramping tools complete all as specified and as directed.

Supply, laying, jointing, testing and commissioning XLPE insulated, armoured, heavy duty, LT UG cable with aluminium conductor, 1100 volts grade cross sectional area 70 sqmm 3.5 core connected with aluminium lugs connected by cramping tools complete all as specified and as directed Note for Srl item No. 128 & 129:- Excavation, earthwork and protection of cable shall bemeasured and paid seperately.

Supply and providing sand cushioning with dry clean sand 15 cm below cable and 8 cm above the cable complete all as specified and directed. Note : Punned thickness shall be measured for the purpose of payments.

Supply and laying burnt bricks old size sub class 'B' laid in trenches for cable protection with length of brick perpendicular to length of cable complete all as specified and as directed.

S&F Water heater storage type, electric, capacity 25 litres, BEE 5 star rated with 2.0 KW heater elements double thermostate with setting including fixing arrangement with anchor fasterner complete all as specified and as directed. Make:- Havells Model Monza or equvelent of makes Bajaj / USHA LEXUS/ RACOLD .

Supply and fixing sheet metal enclosures for DBs when MCBs to be used single pole & neutral double door 4 way with 200 amps rated bus bar complete all as specified and as directed.

S&F MCB SPN 40 Amps 'B' series 10 kA 240 Volt complete all as specified and as directed.

S&F switch socket combination 2 in 1, 6 pin 5 and 15 amp complete all as specified and as directed.

S&F bib taps cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe as per SSR part-1 of size 15 mm bore complete all as specified and as directed.

S&F PVC connection pipe 15mm bore and 750mm long inlet and outlet for geyser complete all as directed.

M&L for LED garden lights 8 watt cone shape with and including PCC foundation base fixing with the bolts of suitable size with connection of lights with nearest power source available complete all as specified and as directed. Make:- Cat No. MOUNTBL10WLED830PSYMTOPMMAM (1.0 M) of HAVELLS or equivalent as per list of makes.

S&F emergency power backup system of capacity 5500 VA adaptive battery charging control system technology (ABCC) ensures faster battery charging, auto overload handling capacity, low harmonic distortion output voltage should be 220 + 3% volts 50 Hz sinusoidal wave 36 volt DC 180 AH 6N float indicator tubular inverter batteries with high performance, made using rugged tubular plates, minimum maintenance and withstand long and frequent power cuts complete all as specified and as directed. Make of Battery:- EXIDE / AMCO/ PANASONIC / SINETRAC / PRESTOLITE / AMRON / LUMINOVS. Make of UPS:- Siemens / V Guard / Microtech / SU-KAM.

S&F in replacement of LED tube light fitting 20 watt 230 Volt decorative ultra slim linear LED Lighting with extruded polycarbonate, including all internally pre-wired and inncluding connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed. Make : Cat/part No. LUMILINEBS20WLED865SPCWH of Havells or equivalent in philips/Wipro/Jaguar.

Ashis Enterprises

M/s Kamleshwar Singh

Delhi Enterprises

M/s R R MUKHERJEE & CO

M/s Bawa Brothers

united builders

M/s Ray construction

M/S OMANIA ENTERPRISES

M/s Mukesh and company