Construction of Anganwadi Building at Ayanallur

Amount

Construction of Anganwadi Building at Ayanallur Colony in Ayanallur panchayat in Gummidipoondi Panchayat Union

Earth work excavation for foundation in all classes of soils and sub soil to full depth except in hard rock requiring blasting but inclusive of shoring strutting if required for the sides of foundation.

Supplying and filling in foundation and basement with good sand in layers not more 15 cm thick including ramming, watering and compacting etc.complete complying to standard specification

Cement Concrete 1:4:8 mix using 40 mm HBG metal for foundaion including watering wherever necessary and laid in layers of not more than 15cm thick. Compacting etc., complete complying with standard specifications and as directed.

Supplying and filling with carted earth foundation and basement with good sand in layers not more 15 cm thick including ramming, watering and compacting etc.complete complying to standard specification carted earth

Brick work in CM 1:5 mix using country bricks ground moulded of size 23 x 11 x 7 Cm for the following including curing etc., complete complying with standard specifications Sub Structure.

Brick work in CM 1:5 mix using country bricks ground moulded of size 23 x 11 x 7 Cm for the following including curing etc., complete complying with standard specifications Super Structure.

Supplying and Fabricating and placing in position MS Steel or ribbed for steel for all reinforced cement concrete works as per the design given including cost of steel and blinding wire all floors etc., complete complying with standard specification.

Supplying and Erection centering for sides and soffiots including necessaary supports and strutting as directed by the departmental officers. Rate for 10m2 for the following items Below Basement

Supplying and Erection centering for sides and soffiots including necessaary supports and strutting as directed by the departmental officers. Rate for 10m2 for the following items Above Basement Column GL

Supplying and Erection centering for sides and soffiots including necessaary supports and strutting as directed by the departmental officers. Rate for 10m2 for the following items Above Basement

Cement Concrete 1:2:4 using 20 mm ISS HBG metal for all RCC item of works excluding cost of reinforcement and fabricating charges, centering and shuttering but icluding curing and providing fixtures like fan clamps in the RCC floor or roof s

Reinforced cement concrete 1; 11/2;3 using 20mm iss HBG metal including the cost and conveyance of all meterials and cost of all labour charges etc completed Below basement,..

Reinforced cement concrete 1; 11/2;3 using 20mm iss HBG metal including the cost and conveyance of all meterials and cost of all labour charges etc completed Above Basement,..

Providing Scratch proof ceramic tiles including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc, complete.

Dadooing of walls with colour printed glazed tiles of size 15cmx15cmx6 mm of best quality. including cost and conveyance of all materials to site and labour charges etc, complete

Granolithic floor finish in cement mortar 1:2:4 using 25 mm thick and pointing with same colour including cost and conveyance of all materials to site and all labour charges etc completed,..

Ceiling Plastering with cement mortar 1:3 mix to 10 mm thick for R.C.C. Items including cost and conveyance of all materials to site and all labour charges etc complete

Plastering cm 1;5 -12mm Thick including the cost and conveyance of all materials and cost of all labour charges etc., complete.

Supplying and painting the walls with two coats of oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the walls smooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. (The colour and shade of the distemper shall be got approved by the Executive Engineer before use of work).

Painting two coat approved Exterior Emulsion paint over the plastered surface including cost and conveyance and all other charges etc.,

Supply of steel doors and windows

door 0.90x2.10 m

Door (D) 0.75x2.10 m

Door (D 1 ) 1.00 x 2.10 m

Door (D 2 ) 1.10 x 2.10 m

Window 1.20 x 1.30 m

Ventilator 0.6X 0.45 m

Supplying and painting two coats new iron work such as steel doors ventilators, window bars etc., (WITHOUT PRIMER)

door 0.90x2.10 m

Door (D) 0.75x2.10 m

Door (D 1 ) 1.00 x 2.10 m

Door (D 2 ) 1.10 x 2.10 m

Window 1.20 x 1.30 m

Supply and fixing of Cuddappa slab including cost and conveyance of cuddappa slab and labour charges for fixing etc, complete.

Finishing the top of roof with one course of Machine pressed tiles of size 23x23x2cm in 1:3 12mm thick using WCC

Supplying and fixing P.V.C rainwater down fall pipe of 110m dia with necessary shoes, bends,& clamps etc.,

Supplying & Fixing in position of Indian type Water closet 580x440mm of approved quality

Cost and supply of RCC Jolly

Wiring with 2x1.5 Sq.mm (22/0.3) PVC insulate SC Unsheathed Cu conductor of 1100v grade in suitable PVC rigit pipe on wall and ceiling with PVC Accessories and with TW switch box and 5A FT switch with painting of suitable colour for open PVC light Fan Point for Elctronic regulator ) (5 Point per coil) SD 18 Light Point & Fan Point

Wiring with 2x1.5 Sq.mm (22/0.3) PVC insulate SC Unsheathed Cu conductor of 1100v grade in suitable PVC rigit pipe on wall and ceiling with PVC Accessories and with TW switch box and 5A FT switch with painting of suitable colour for open PVC light Fan Point for Elctronic regulator ) (5 Point per coil) SD 18 Plug Point

Supply and fixing of 16 Amps DPI switch of 500 V with Main Box FUSE and natural on Suitable TW board with PWD earthing

Supply and run of 2 of 4 Sq mm (56/0.3) PVC insulated SC unsheathed Cu conductor of 1100V on 7/20 GI bearer wire for service connection mains SD 63

Towards cost and supply of Tube light Fittings with light including cost and convayance tosite and labour charges etc, complete.

Supply and fixing of 1200 mm (48") AC ceiling fan (Conforming to ISS 374 / 1979) complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp.(SD110)

GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

A T Santhanam