PROVN OF TYPE V AND TYPE IV ACCN FOR CIV OFFICERS AT NASIK ROAD CAMP

Amount

NOTE: Schedule ‘A’ Part I to X are Prepriced by MES. Bidders shall insert their lumpsum amount in the Green coloured field under Col-13 only.

Total amount of Sch 'A' Part-I (Building Works)

Total amount of Sch 'A' Part-II (Internal water supply)

Total amount of Sch ‘A’ Part III (Internal Electric Supply)

Total amount of Sch ‘A’ Part IV (External Water Supply)

Total amount of Sch ‘A’ Part V (External Electric Supply)

Total amount of Sch 'A' Part-VI (Road, Path & Culvert)

Total amount of Sch 'A' Part-VII (Sewage Disposal)

Total amount of Sch ‘A’ Part VIII (Area drainage)

Total amount of Sch ‘A’ Part IX (Fencing and Steel Gate)

Total amount of Sch ‘A’ Part X (Excavation, Earthwork & Site Clearance)

SCH 'A PART XI (Miscellaneous B/R and E/M works) Note: This schedule is not pre-priced by MES and the rate indicated as "Rs 0.00" under Col 6 signifies this fact only

M &L for submain wiring with 2 single core FRLS PVC insulated unsheathed, multi stranded flexible copper conductor 1100 volts grade cables 2.5 Sqmm drawn through consealed conduit and including PVC conduit heavy grade with and including 1 single core 2.5 Sqmm 1100 V grade FRLS PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified & directed. Note: 3 runs ( 2+1) of single core FRLS PVC insulated unsheathed multi stranded flexible copper conductor and one run of PVC conduit heavy duty shall be measured as one unit

M &L for submain wiring with 2 single core FRLS PVC insulated unsheathed, multi stranded flexible copper conductor 1100 volts grade cables 4 Sqmm drawn through consealed conduit and including PVC conduit heavy grade with and including 1 single core 4Sqmm 1100 V grade FRLS PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified & directed. Note: 3 runs ( 2+1) of single core FRLS PVC insulated unsheathed multi stranded flexible copper conductor and one run of PVC conduit heavy duty shall be measured as one unit

M &L for submain wiring with 2 single core FRLS PVC insulated unsheathed, multi stranded flexible copper conductor 1100 volts grade cables 6 Sqmm drawn through consealed conduit and including PVC conduit heavy grade with and including 1 single core 6 Sqmm 1100 V grade FRLS PVC insulated unsheathed multi stranded flexible copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified & directed. Note: 3 runs ( 2+1) of single core FRLS PVC insulated unsheathed multi stranded flexible copper conductor and one run of PVC conduit heavy duty shall be measured as one unit

Supply & fix ceiling fan, 1200 mm (48") sweep with BLDC motor, 5 star rating BEE mark (after assembling the same with the fan hook/box) with the fan hook/box and connecitng up complete with and including three core copper conductor flexible cord of 0.5 sqmm cross sectional area of required length from ceiling rose to porcelain connector block of fan. Make : Havells Cat No ES-60 or equivalent in makes listed in Appendix 'C', complete all as specified and as directed.

S & F LED tube 1100-1200mm in length along with CRCA LED Batten complete LED light fitting fixture including LED Tube and Batten, LED Tube fitting consist of Polycarbonate housing with extruded aluminium heatsink for mounting LED chip, LED tube system wattage consist of 18 / 20 W, 140-260V AC, system Lumen output min 1800 Lumen in 18 W and 2000 lumen in 20 W with 5700-6500 K CCT with PF>0.95 CRI>=80 and with <=10 % THD, with Min 2.5 KV Surge protection in Built LED Batten consist of powder coated CRCA box type batten with decorative end caps should be supplied for installing above LED tubes of any make as per Appendix 'C'.

S & F 10W LED wall mounted decorative fittings including LED lamp, pressure die cast aluminium housing with IP 65 rating, LED fixture system wattage consist of 10 W, 140-260V AC, system Lumen output min 950 Lumen with 5700-6500 K CCT with PF>0.95 and with <=15 % THD, with Min 2.5 KV Surge protection in Built and complete LED fixture with BIS R mark and R Registration No of any make as per Appendix 'C'.

Supply & fix linear 550- 600 mm tiltable surface mounted 10W to 12W, Decorative LED Batten Fixture consisit of Aluminum Extrusion housing with PC Diffuser , LED Fixture System wattage of 10 W / 12W , 140 V -260 V AC, System Lumen Output min 1000 Lumen in 10 W and in 1200 lumen in 12W with 5700 - 6500 K CCT with PF > 0.95 and with < = 15 % THD , with Min 2.5 KV Surge protection in Built and complete LED fixture with BIS R mark and R registration No. of make as listed in Appendix 'C', complete all as specified and as directed.

S & F of LED light fitting out door type Building security light 25W to 30W fixture consist of Extruded Aluminium Extrusion housing with PC Diffuser, LED Fixture System wattage of 36W /40W, 140V - 260V AC, System Lumen Output min 3960 Lumen in 36W or 4400 lumen in 40W with 5700 - 6500 K CCT with pf > 0.95, CRI >=80 and with < = 10% THD, with min 2.5 KV Surge protection in Built and complete LED fixture with BIS R mark and R Registration no. of any make as per Appendix 'C'.

S&F MCB Single pole 240 volts 6 Amps to 32 Amps 10 KA , 'C' series, complete all as specified and directed.

S&F MCB SPN 240 volts 40 Amps 16 KA complete all as specified and directed.

S&F MCB TPN, 240 volts, 63 Amps 25 KA complete all as specified and directed.

S&F TV Socket modular complete all as specified and directed.

S&F Telephone socket modular complete all as specified and directed.

Supply & fix PVC body exhaust fan 225mm sweep, 1400RPM, single phase, light weight, white/ivory plastic rust proof body & blades, self opening louvers for protection from birds and rain water, fixing by means of rugged bolts, nuts and washers etc on the round hole cut in wall, including three core copper conductor flexible cord of 0.5sqmm cross sectional area of required length from ceiling rose to porcelain connector block of exhaust fan suitable on working AC, SP 230 V electric supply. Make as listed in Appendix 'C', complete all as specified and as directed.

Supply, installing, connecting, testing and commissioning of electric water heater storage type capacity 25 Litrs BEE 5 star rated (2017) with stainless steel innner tank duly insulated with 50mm thick glass wool and duly powder coated outer container, indicating lamps, thermostat with 1.5KW ISI marked heating element, horizontal or vertical type with ISI certification mark, installing on wall with suitable size bolts, nuts, etc and connecting up with water and electric connections including hot and cold connection pipes complete all as specified and as directed.Make as listed in Appendix 'C'.

Supply and fix Meter, single phase, multifunction, electric energy LED display meter 5 Amp to 30 Amp, 2 wire, 240V, 50Hz, 3200imp(KWH) Accuracy class : 1.0 conforming to :13779 display various electrical parameters like electric consumption(KWH), Voltage(V), Current(I), Power factor(pf), load (KW/KVA), frequency (Hz) as pre batten , surge resistant and temper proof with magnatic shielding 'A' lower power consumption, sustained accuracy over long period of time. High insulation and Die electric strength polycorbonate encloser, with UV protected, flame retardant, Melding waterproof clear/transperant cover fixing, all as specified and as directed.

Supply and fix Meter, three phase, multifunction, electric energy LED display meter 5 Amp to 30 Amp, 2 wire, 240V, 50Hz, 3200imp(KWH) Accuracy class : 1.0 conforming to :13779 display various electrical parameters like electric consumption(KWH), Voltage(V), Current(I), Power factor(pf), load (KW/KVA), frequency (Hz) as pre batten , surge resistant and temper proof with magnatic shielding 'A' lower power consumption, sustained accuracy over long period of time. High insulation and Die electric strength polycorbonate encloser, with UV protected, flame retardant, Melding waterproof clear/transperant cover fixing, all as specified and as directed.

M& L for Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.3 mm thick, buried vertically in ground (Earth pit not less than 2.25 metres deep below normal ground level and top edge of the plate not less than 1.5 m below ground level), connected to and including Galvanised steel earthing wire 4mm dia by means of bolts, nuts & checknuts and washers etc; GI pipe 15 mm dia medium grade pipe for protection of G.I earth strip, both to be provided to the extent of 7.5 metres, all as shown on electrical plate No 3 of MES SSR-2009 Part-I, other end connected to electrical main switch board (inside the bldg) GI protection pipe buried in ground, laid under floors/plinths or fixed on walls or concealed in walls etc; with provision of mixture of charcoal dust & common salt packed upto minimum 150 mm all around the earth plate , including PCC 1: 2 : 4 type B-1 earth pit with M.S angle iron frame, cast iron cover with locking arrangement, with G.I 20 mm dia medium grade pipe and M.S funnel with wire mesh for watering arrangement, including necessary excavation and earth work in any type of strata & testing on completion.

Supply, laying, testing and commissionnig of UG LT cables 1100 volts grade, XLPE insulated, screened and PVC sheathed, galvanised steel strip or wire armoured with multi stranded aluminium conductor, ISI marked, heavy duty including cable glands, cable lugs in LT panel/MDB in building etc to suit the cable including material and labour for all jointing/connecting material as required size, cables laid in trenches/ducts/under plinth floors passing through pipes etc, fixed on wall complete of following sizes :-

(a)120 sqmm x 3.5 core

(b) 35 sqmm x 3.5 core

(c) 10sqmm x 2 core

M& L for horizontal drilling/ boring under road for passing of cable pipe/ water supply pipe by using thrench less technology using ultrasound technique and necessary machine with and including HDPE pipe 150mm dia, suitable for 0.4mpa working pressure all as specified and directed.

S & F FRP type looping box of size 280x170x130mm, top hinged with aluminium bus bar of 50Amp rating for phase and neutral on porcelain base insulator, fixed on pole with the help of MS nuts bolts and MS clmaps -2Nos of size 40mmx4mm thick with and including one No MCB SP 6Amps capacity mounted on on DIN rail inside box, work also includes making suitable hole in pole to take out connecting to fitting if required at site all as specified and as directed.

S & F of LED street light fitting , pressure die cast aluminium housing, heat resistance toughened glass, IP 66 protection, better optics for uniform distribution, aesthetically designed roadway liminair with excellent thermal management, including wiring from junction box/OH line to the fitting, with and including brackets made out of 50mm bore GI pipe, light grade 1.5m length including 02 Nos clamps made out of 50x5mm flat iron with nuts and bolts 75mm long 12mm dia (04Nos) with washers all as per Crompton Cat No LST-45-CDL or equivalent of make listed in Appendix 'C', complete all as specified and as directed.

Supply, installing, testing and commissioning, weather, dust and vermin proof LT panel board factory made, outdoor type of suitable size so as to accommodate the following accessories, depth not less than 500mm, IP 54 and all as per IE rules, prewired and fabricated with 3.15mm thick CRCA sheet exoxy power coated double door with aprons, duly powder coated mounted on MS angle iron frame 50x50x6mm welded in shape with two coats of synthetic enamel paint over a coat of red oxide primer including necessary grouting in PCC 1:3:6 type C-1 using 20mm graded coarse stone aggregates complete with leg 50cm grounted in ground in PCC at 40cm above ground including connection cable with cable glands, lugs etc and consisting of the following : .

(a) Aluminium bus bar 300Amps mounted on epoxy based insulator installed with colour sleeves - 01 Set( 3 Phase and neutral)

(b) Incoming

(i) MCCB TPN, 415 Volts, 200 Amps, 25 KA , 50 Hz with fixed thermal and magnetic settings (Legrand Cat No 4202 19)-01 No

(c) Outgoing

(i) MCCB TP, 415 Volts, 100 Amps, 25 KA , 50 Hz with fixed thermal and magnetic settings (Legrand Cat No 4200 45)-04 No

(ii) MCCB TP, 415 Volts, 63 Amps, 10 KA , 50 Hz, with fixed thermal and magnetic settings (Legrand Cat No 4200 03)-01 No

(d) Voltmeter 3 Phase, class 1, digital square type of range 0 to 500 Volts -01 Nos

(e) Ammeter 3 Phase, digital square type of range 0-200 Amps with suitable capacity CTs-01 Nos

(f) LED phase indicator of Red, yellow, blue-01 set of 03

(g) CT 200x5 -03 Nos

(h)Danger Notice plate/sticker of suitable size on fromt panel board

(j) Panel wiring with suitable capacity of copper conductor cable of 1100 V grade

(k) Incomming and outgoing feeder name Radium sticker inside panel

(l) PCC Foundation (1:2:4) type B1 of suitable size as directed by Engr-in-Charge.

Note:- MCCBs Make Legrand/ Schneider/L&T

Note: Panel shall be manufactured by the reputed manufacturer who is possession of type test certificate by CPRI not older than ten years.

S & F decorative gate light made up of high gradde unbreakable polycorbonate material suitable for retrofit CFL 8W/14W (TU) B22 base Moon (Opal) including jointing pipe, CFL and connecting accessories complete all as specified and as directed.

M& L for Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.3 mm thick, buried vertically in ground (Earth pit not less than 2.25 metres deep below normal ground level and top edge of the plate not less than 1.5 m below ground level), connected to and including GI strip 32x6 mm by means of bolts, nuts & checknuts and washers etc; GI pipe 40 mm dia medium grade pipe for protection of G.I earth strip, both to be provided to the extent of 7.5 metres, all as shown on electrical plate No 3 of MES SSR-2009 Part-I, other end connected to electrical main switch board (inside the bldg) GI protection pipe buried in ground, laid under floors/plinths or fixed on walls or concealed in walls etc; with provision of mixture of charcoal dust & common salt packed upto minimum 150 mm all around the earth plate , including PCC 1: 2 : 4 type B-1 earth pit with M.S angle iron frame, cast iron cover with locking arrangement, with G.I 20 mm dia medium grade pipe and M.S funnel with wire mesh for watering arrangement, including necessary excavation and earth work in any type of strata & testing on completion.

S & F time switch 250V single phase of 20 Amp rating with connector fitted inside steel enclosure, all as specified and as directed.

M & L for 200 mm thick (compacted thickness) Granular Sub Base (GSB) of Grade I as per Table 400-I of MORT&H, IRC specification laid with mechanical paver rolled and compacted to required gradient and camber with 8 to 10 tonne power roller and vibratory roller complete complete as per MORT&H specification clause-401 including all tools and plant and managing diversion all as specified and as directed. complete all as specified and as directed.

M&L for 60mm thick machine pressed pre-cast cement concrete interlocking paver blocks with grey cement and pigment, rubber moulded any shape and size confirming to IS 15658-2006, M-35 grade as in floor/pavement laid over and including 30mm thick crushed stone sand complete all as specified and as directed.

Samruddhi Construction

AGRAWAL ASSOCIATES

MUDRIK ENTERPRISES

M/s M R MAHANA

DARSHAN CONSTRUCTION Co.