ADDN/ALTN TO BLDG NO P-144 AND P-145 (TYPE-II QTRS) AT B and C COLONY AT DRDO ESTATE UNDER GE (I) RnD PASHAN, PUNE

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead Of area 3 sq. metres and below complete all as specified and directed.

Taking out doors, windows and clerestory window shutters (steel or woood) of area 3squre metres and below including stacking within 50 meteres lead complete all as specified and directed.

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead complete all as specified and directed.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge

Dismantling tile work in floors and walls laid in cement mortar including stacking material within 50 metres lead complete all as specified and directed.

Litre

Ten Square Metre

Providing and laying Cement concrete, 1:2:4, 40mm thick with 20mm nominal size stone aggregate in flooring finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc and complete all as specified and directed.

Providing and laying non skid Ceramic floor tiles of size 300x300 mm (thickness not less than 7mm), of 1st quality conforming to IS : 15622, of approved make and shade laid on 20 mm thick bed of cement mortar 1:4, jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc and complete all as specified and directed.

Material and labour for glazed, coloured ceramic tiles in verticle surface of size 450mm x 350mm x 7mm to 8mm thick set and joined in neat cement slurry and pointed in cement slurry and pointed in white or coloured cement to match over and including 10mm thick cement plaster in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge.

Providing and laying Vitrified tiles polished finish of size 600mm x 600mm (thickness not less than 9mm) conforming to IS:15622, of approved brand & manufacturer and shade, laid on 20 mm thick in cement mortar 1:4 jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.complete all as specified and directed.

Providing and laying stone tile of granite any colour and shade (polished) work for wall lining, riser, verticle surface etc over 12mm thick bed of cement mortar 1:3 and cement slurry @3.3 kg/sqm including pointing in white cement complete all as specified and directed by the Engr-in-Charge

Providing edge moulding to 18mm thick granite work in kit counters, vanities, steps etc including machine polishing to edge to give high gloss finish etc complete all as specified and directed by the Engr-in-Charge

Providing and laying Vitrified tiles in different sizes 8 to 9 mm thick conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete all as specified and directed.

Providing and fixing aluminium Powder coated aluminium Frame (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) complete all as specified and directed.

Providing and laying Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing, moulding and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

Providing and fixing for fly proof stainless steel wire cloth of grade 304 wire guage with 0.5mm dia wire and 1.4mm wide aperture with matching as in door, window, ventilators etc complete all as specified and directed by Engr-in-charge

Providing and fixing chromium plated brass curtain rods 20mm dia and thickness 1.25 mm with two brass brackets fixed with CP brass screws and PVC sleeves etc. wherever necessary complete all as specified and directed.

Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead complete all as specified and directed

Providing and fixing 12 mm thick prelaminated particle board with decorative lamination on both sides flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc, complete all as specified and directed of engineerin-charge.

Providing MS piano hinges ISI marked IS : 3818 finished with nickel chromium plating grade I as per IS 1068 and fixing with necessary screws etc complete overall witdth 35mm complete all as specified and directed

Providing and fixing chromium plated brass 50mm cupboard or wardrobe knobs with nuts complete all as specified and directed

Providing and fixing 115 mm oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete all as specified and directed.

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineerin- Charge

Providing and fixing factory made panel modular PVC door shutter 30 mm thick consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing complete all as specified and directed.

Providing and fixing aluminium tower bolts 150 mm size ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete all as specified and directed.

Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. (100X58X1.90 mm) complete all as specified and directed

Providing and fixing aluminium handles of size 100mm, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc complete all as specified and directed.

Material and labour for Machine cut cudappah stone slab 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over and including 15mm thick in CM 1:6 complete all as specified and directed.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc With frosted glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) with EPDM rubber / neoprene gasket etc. complete all as specified and directed by Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item)

Providing Second class hard wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) complete all as specified and directed.

Providing and fixing aluminium tower bolts 200 x 10 mm size ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete all as specified and directed.

Providing and fixing brass sliding door bolts 300 x 16 mm size ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete all as specified and directed.

Providing and fixing aluminium handles 125 mm size, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete all as specified and directed.

Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) commercial type, core of block board construction with frame of IInd class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws complete all as specified and directed.

Supply and lay in trench reinforced precast class LV,type I, flat size 250 mm x 150mm x 40 mm LT cable protection complete all as speci

Supply and fix 500 Litres ISI embosed Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, complete all as specified and directed.

Providing and fixing 20mm bore ball valve (brass) of approved quality, High or low pressure with plastic floats complete all as specified and directed

dismantling G I Pipes 15mm to 40mm (external work) including excavation and refilling trenches after taking out the pipes manually/by mechanical means including stacking of pipes within 50 metres lead as per direction of Engr-in-Charge

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps,i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall 15 mm dia nominal bore complete all as specified and directed.

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps,i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall 20 mm dia nominal bore complete all as specified and directed.

Material and labour for preparation of new wooden surfaces and painting with synthetic enamel paint of approved brand and manufacture to give an even shade two coats over a coat of primer on new work complete all as specified and directed

Dismantling and breakingup drain pipes AC/CI/PVC set in cement mortar 100mm / 75mm bore complete all as specified and directed

Supply and Fix 20mm gun metal gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

Supply and Fix 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls complete all as specified and directed.

Cutting chases in brick masonry walls for sand cast iron/centrifugal cast (spun) iron pipes and making good the same with PCC 1:3:6 complete all as specified and directed

Supply and fix 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls, Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fix 75 mm PVC (SWR) branch piece single (single Y) equal or unequal with access door complete all as specified and directed.

Supply and Fix 110 mm PVC (SWR) bends any radius with acess door complete all as specified and directed.

Supply and fix 75 mm bore PVC (SWR) bends of any radius, Complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Salt glazed stone ware gully trap 150mm square type 'P' includng MS gratings suitable to 150mm x 150 mm gully trap and including PCC chamber 10 cm thick and RCC cover set in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair stainless steel plate rack of size 600mm X 900mm made out of 1mm thick stainless steel sheet of grade 304 fixed all as per manufacturers instructions complete all as directed and approved by Engr-in-Charge.

Supply and Fix in repairs Vitreous China wash basin, white, flat back, size 580x450mm including brackets, including cutting for and pinning in ends of brackets or erecting stand and including 32mm bore waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and directed.

Providing and fixing in repair C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms 15 mm nominal dia complete all as specified and directed.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete all as specified and directed.

Providing and fixing in repairs PTMT soap dish holder having length of 138mm, wreadth 102mm height of 75mm with concealed fitting arrangements, weighing not less than 106 gms complete all as specified and directed

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. complete all as specified and directed.

Supply and Fix 110 mm PVC (SWR) branch piece single (single Y) equal or unequal.with access door complete all as specified and directed.

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter complete all as specified and directed.

Providing and fixing 15 mm nominal dia C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 and complete all as specified and directed.

Supply and Fix in repairs vitreous china water closet squatting pan 'orissa pattern, white coloured of size 580 x 440 mm, alongwith 'P' or 'S' trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material including malba complete all as specified and directed.

Providing and fixing P.V.C 10 litre capacity - White low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete all as specified and directed.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250 mm complete all as specified and directed.

Providing and fixing uplasticised PVC connection pipe 450mm length with brass unions 15 mm nominal bore complete all as specified and directed.

Supply and fix in repairs 40 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm ² fixed complete to walls, ceilings or in floors etc, including necessary pipe fittings, Complete all as specified and directed by Engineer-in-Charge.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 Metres lead completeall as specified and directed.

Taking down old unserviceable LT cables 35 sqmm size from trenches including disconnecting cables and stacking of cables within 50 metres lead complete all as specified and directed

Supply,laying and testing cables XLPE insulated, screened,PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 35.0 sqmm 3.5 core complete all as specified and directed.

Supply and Fix PVC (SWR) multi floor trap with grating including jointing with solvent cement dia of outlet 75mm complete all as specified and directed.

Material and labour for keyed pointing to random or polygonal rubble, uncoursed or brought upto courses in CM (1:3) complete all as specified and directed.

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. (Two coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. complete all as specified and directed.

Providing and fixing in repairs 600 x 120 x 5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with CP brass brackets and guard rail complete fixed with 40mm long screws, rawl plugs etc complete all as specified and directed

Material and labour for 6 mm cement plaster 1:3 finished with a floating coat of neat cement complete all as specified and directed.

Material and labour for distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on new work (two coats) over and including water thinnable priming coat with cement primer including providing and applying white cement based putty of average thickness 1mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete all as specified and directed.

Material and labour for distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on new work (two coats) over and including water thinnable priming coat with cement primer complete all as specified and directed.

Material and Labour for Removing white or colour wash by scrapping and sand papering andpreparing the surface smooth including necessary repairs and Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. (Two coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. complete all as specified and directed.

Material and labour for preparation of old painted wooden surfaces of any description, not otherwise described painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade one coat on old work complete all as specified and directed by Engineer-in-Charge.

Material and labour for preparation of old painted steel surfaces of any description, painting one coat with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade complete all as specified and directed

Material and labour for anodised aluminium window and ventilator shutters, fixed type without sash bar for powder coating of any colour (Thickness or power coating not less than 50 micron), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc compl

ete all as specified and directed.

Material and labour for 25mm thick, Kota stone work (machine cut edges in veneer work) for wall lining upto 10m height, backing filled with a grout of 12mm thick cement mortar 1:3 and jointing with cement mortar 1:2 including grinding with hand grinder on joints, rubbing and polishing complete. (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately), complete all as specified and directed by the Engr-in-charge.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 metre and making good surface in hard/dense soil complete all as specified and directed.

Material and labour for PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in filling of post holes complete all as specified and directed.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc and distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two c

Material and labour for MS angle posts, struts in fencing including cutting to shape as directed and drilling holes, notching for wire etc, flat iron fillets, bolts etc including all necessary drilling, bolting, riveting, welding etc and similar work conforming to Fe 290 grade E-165 complete all as specified and directed.

Material and labour for preparation of new steel surfaces of any description not otherwise described exe 10cm in width or girth & applying with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 75mm thick cement concrete type D2 1:4:8 using 40mm graded stone aggregate as in sub base, Complete all as specified and as directed by Engineer-in-Charge.

Material and labour for cement concrete type B -1, 1:2:4 (20mm graded aggregate) 100 mm thick as in hardstanding complete all as specified and directed.

`Providing and laying in position cement concrete with smooth finish of specified grade excluding the cost of centering and shuttering - All work up to plinth level, as in plinth protection of PCC 1:3:6 using graded stone aggregate 20 mm nominal size Complete all as specified and directed.

oats) over and including water thinnable priming coat with cement primer including providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete all as specified and directed

Providing and laying for cement concrete type D-2, using 40mm graded aggregate, as in sunken filling complete all as specified and directed by Engr-in-charge.

Supply only liquid water proofing compound complete all as specified and directed

Taking down carefully copper/aluminium point wiring (light, socket or power) complete and making good distrubed surfaces of walls, floors, ceilings etc all as specified catered for schedule of credit.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc and distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : old plastered surface as in ceiling (two coats) over and including water thinnable priming coat with cement primer complete all as specified and directed

Supply and fix Pre-painted galvalume aluminium zince coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Taking down exisiting main switches, industrial plug and socket & DBs alongwith MCB/MCCBs of any make and size and type all as specified and directed

Material and Labour for 15mm thick rendering on fair face of brick work or concrete surfaces in CM 1:4 finishing the surface (sides and bottom) using WPC finished the surface even and smooth without using extra cement, as in sunken wall area complete all as specified and directed.

Testing and commissioning of ceiling fan/exhaust fan including wiring the down rods of standard length (upto 30cm) with 1.5 sqmm FRLS PVC insulated copper conductor, single core cable including providing and fixing phenolic laminated sheet cover on the fan box etc as required all as specified and directed

fied and directed by the Engr-in-charge

Dismantling of old PVC water tank/iron loft tank of capacity 500 ltrs complete all as specified and directed

(b) all as per item No 100 here in before but for Fan Point

(c) all as per item No 100 here in before but for Bell point

(b) all as per item No 100 here in before but for 5 Amp socket point in independent board

Dismantling the existing sub main wiring/power point wiring of any size and type alongwith PVC metallic conduit/casing/batten with fixtures and fittings complete all as specifeid and directed

Material and labour for painting of ceiling fan/exhaust fan in installed position with one coat of spray painting with synthetic enamel paint of approved brand and manufacture to give an even shade including cleaning of surface with detergent etc complete all as specified and directed.

Supplying and drawing 3 x 2.5 sqmm size of FRLS PVC insulated copper conductor, single core cables in the existing surface/recessed steel/PVC conduit as required complete all as specified and directed

Supply and fixing 6 pin 15/16 Amps Modular socket outlet on existing modular plate & switch box including connections but excluding modular plate etc as required complete all as specified and directed

Wiring for circuit/submain wiring alongwith earth wire with the 2 x 4 sqmm + 1 x 4 sqmm earth wire of FRLS PVC insulated unsheathed copper conductor, single core cable in surface/recessed medium class PVC conduit as required complete all as specified and directed

Group 'A' Wiring for light/fan point/ exhaust fan point/ call bell point with 1.5 sq mm FRLS PVC insulated unsheathed copper conductor single core cable in surface / recessed medium class PVC conduit, with modular swtich, modular plate, suitable GI box and earthing the point with 1.5 sq mm FRLS PVC insulated copper conductor single core cable etc all as required complete all as specified and dircted by Engr-in-Charge. (a) light point

Supply and fixing 15/16 Amps modular switch on existing modular plate & switch box including connections but excluding modular plate etc as required complete all as specified and directed

Supply and fixing 3 pin 5/6 Amps Modular socket outlet on existing modular plate & switch box including connections but excluding modular plate etc as required complete all as specified and directed

Supply and fixing Bell dingdong, 230V, AC, 50 Hz all as specified and directed

Supply and fixing Basic all purpose surface and wall mounted LED batten 20 Watt 4 feet with aluminum housing & integrated electronic driver including 2 Core copper wire from ceiling rose to light fitting.

Supply and fixing Basic all purpose surface and wall mounted LED batten 10 Watt , 2 feet with aluminum housing & integrated electronic driver including 2 Core copper wire from ceiling rose to light fitting.

Supply and fixing Environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagon bulk head Back-lit LED luminaire comprising of high brightness LEDs, 10 Watt, IP-66 all as directed.

Supply and fixing New generation energy saving and environmental friendly long life LED street light 25 Watt made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08 including GI bracket 40 mm dia low grade, 1.2 meter length bent to shape of 120 degree with GI strip clamp 2 Nos and nut, bolts and washers

Supply and fixing 3 pin 5 A Ceiling rose on the existing junction box/ wooden block including connections etc. as required

Supplying and fixing 4 way (4 + 12), Double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415V, on recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc as required (But without MCB/RCCB/Isolator)

Supplying and fixing 63A rating, four pole, 415V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required

Supplying and fixing 8 way, Double door, single pole and neutral, sheet steel, MCB distribution board, 240V, on surface/recess, complete with tinned copper bus bar, neutal bus bar, earth bar, din bar, internconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

Supply and fixing 5 to 32 Amps rating , 240/415V, 10 KA "C" curve, miniature circuit breaker suitable for inductive load of double poles in the existing MCB DB complete with connections, testing and commissioining etc as required

Supply and fixing 5 to 32 Amps rating , 240/415V, 10 KA "C" curve, miniature circuit breaker suitable for inductive load of single poles in the existing MCB DB complete with connections, testing and commissioining etc as required

Supply and fixing 40 Amps rating, double pole, 240 Volts, isolator in the existing MCB DB complete with connections, testing and commissioining etc as required

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required including taking down old unserviceable earthing. (for 02 Nos TPN DB)

supply and fixing following 5/6 amp piano switch/socket on the exisiting switch box/cover including connections etc as requried & switch box including connections but excluding modular plate complete all as specified and directed.

Supplying and fixing two module stepped type electronic fan regulator on the exising modular plate switch box including connections but excluding modular pate complete all as specified and directed

Supply and fixing Modular bell push 2 way on the existing modular plate & switch box including connections but excluding modular plate complete all as specified and directed

Supply, fixing, flush to wall, fabrication, expoxy powder coating over a coat of red oxide primer for Meter box 4 rooms single phase made up of MS sheet 2 mm thick of size 0.9 x 0.9 x 0.3 mtrs including concealed in wall, MS angle irons, cable glands for incomming & outgoing, neoprene gasket for front door, provision for fixing of 4 nos MCB SPN for meter connection and taking down old unserviceable meter box all as directed at site by Engineer-in-Charge

Material and labour for light grade GI pipe 40mm dia for cable protection all as specified and directed

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr deep for taking out/laying of HT/LT under ground cable and getting out in the following type of earth state complete all as specified and as directed (a) Soft soil

Supply and fixing 20/32A, 240V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20/32A "C" curve, SP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete wtih connections, testing and commissioning etc, as required complete all as specified and directed

(b) Hard soil

Returning, filling in including spreading,leveling, watering and well ramming in layers not exceeding 25 cm in soils complete all as specified and directed.

Removing surplus excavated soil to a distance not exceeding 50m deposting where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Material and labour for riddled earth filling in trenches to required width at bottom and top of cable cusioning including spreading leveling and consolidation complete all as specified and as directed .Note :punned thickness shall measured and paid.