Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.0 LAccepted-Finance | L1 | Accepted-Finance L1 | |
| 2 | L2₹1.3 L+₹21,230 (20.4%)Accepted-Finance | L2 | Accepted-Finance L2 |
Tender Value
₹1.6 L
EMD Value
₹3,102
Closing Date
15 Sept 2020, 10:00 amClosed
Executive Engineer WSD APWD
Executive Engineer WSD APWD Port Blair
Providing IEI and SITC of Air Conditioners in the Office of SO to DGP Despatch Room and Pantry at PHQ Port Blair Sw Prividing IEI
2020_APWD_901_1
22/NIT/WSD/2020-21
Open Tender
Electrical Works
Works
30 days
Port Blair
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
EE WSD APWD
₹3,102
16 Sept 2020
9 Sept 2020
15 Sept 2020
9 Sept 2020
15 Sept 2020
9 Sept 2020
9 Sept 2020 - 14 Sept 2020
Amount
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
Group C
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
4 x 6 sqmm + 2 x 6 sqmm
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
5/6 A switch
3 pin 5/6 A socket outlet
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.
Upto 450 mm sweep
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 Nos. 3 pin 5/6 A modular socket outlet and 2 Nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
Installation, testing and commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/ LED lamps per fitting, complete with all accessories including connections etc. as required.
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator)
6 way (4 + 18), Double door
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Single pole
Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A, “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
Supplying of following A.C. Ceiling fan with five star/ ISI mark and all accessories including 300mm down rod as required similar to Havells make ES-50 or equivalent
1200 mm Sweep
Supplying of indoor commercial lighting of recessed, square, recessed mounted,15W LED downlighter with aluminium housing .
Make: Crompton, Model : Crom Square, Cat Ref. LSDN-15-CDL/TL or similar
Supplying of indoor commercial lighting of round surface mounted 12W LED flat panel PDC aluminium housing and PMMA diffuser .
Make: Crompton, Model : Pearl II, Cat Ref. LCDSPLN-R-12-CDL or similar
Supplying of metallic exhaust fan of following sweep. Make- Havells, Model :Ventil Air-DS or similar
Supplying of 1 feet LED batten 4 watt for mirror LED batten complete with connector etc. Make Philips, Model : 31099/31 Cove light or similar
JAY ENGINEERING
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .