renovation of office

Amount

Providing and fixing of 3.5mm thick glass pane (1.75' x 1') to window openings including cost of beading, nails and all leads, lifts, costs and carriages of materials upto site of work complete. (Fixed panes)

Concealing of concrete duct in 4 No. Of rooms of Divisional Office of size (14'x1.5') and vertical portion of size (14’x1’) by providing and fixing ISI marked moist resistant 19mm Plyboard, exposed surfaces covered with 1mm High gloss mica. All tools / tackles / labour/ carriage / fasteners / adhesives are inclusive of the said job and shall be provided by the firm itself. Total sft = 4 x 4' x 8' = 128 sft

Cleaning of window glass panes by way of engaging labour using cleaning material colin/sponge etc. of 4 No. of rooms viz. Xen’s room, Technical Section room, Establishment Section room & SD-1 office.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratch etc. complete.

Providing and applying wall putty of 2mm thickness, of approved brand and manufacturer, over the wall surfaces of all rooms of Divisional Office & ceiling of Technical Section Room to prepare the surface even and smooth complete.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade (two or more coats on new work) over the wall surfaces of all rooms of Divisional Office & ceiling of Technical Section Room. The shade shall be approved by EIC.

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) on windows and doors of Divisional Office.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade (two or more coats on new work) on wooden windows and doors (including wire mesh) of Divisional Office. The shade shall be approved by EIC.

Varnishing of wooden ceiling of 3 rooms of Divisional office building viz. Xen’s room, Estt. Section room and SD-1 office by way of applying two or more coats of standard quality varnish of approved brand and manufacture after cleaning the surface using appropriate size sand paper etc. Total Area=24x3=72 sqm

Fabrication of Officers table of size 5'0" x 3'0" x2'.6" as per Requirement on site in 19 mm thick. Particle board frame work with 1 mm thick laminate table top including 12 mm thick. glass on table top rested. All the inner surfaces shall be finished with 1mm thick white laminate. A drawer unit shall be provided. 3 no.’s of drawers with 1.0 mm. thick laminate shall be provided. Height of drawers shall be 100mm, 100mm and 280mm. Drawer shall consist of 12mm thick particle board Ply sides, back and 6mm thick particle board Ply base. Facia of drawers shall be of 19mm thick particle board Ply finished in 1.0 mm. thick Laminate and with a wooden moulding on top/bottom edge for handle. Each drawer shall slide on a pair of telescopic drawer sliders (Approved make ebcco / Hattich /Godrej). The inside portion of draws to be finished with white laminate. Rate shall be inclusive of all necessary approved fittings like locks and Handle (Approved make) for drawers and any miscellaneous hardware items.

Providing and fixing nickel-plated M.S. pipe curtain rods of 25mm dia. (heavy type) with nickel plated brackets and fasteners. All tools/tackles for the execution of the said job shall be provided by the firm itself. Total Length = 75 ft = 23 meters

Providing and fixing of fancy holders/side locks to hold curtain rods in place as approved by EIC.

Supply & fixing of Curtains of approved cloth, size (7'x4'), colour, quality make including all carriages involved. (Sample to get approved from EIC)

Providing of foldable curtain screen for XEN’s office with framework made up of high-quality wood and curtains of superior quality fabric.

Providing & Fixing of Roll of honour board made of A-Class Deodhar wood duly polished by superior quality varnish with two or more coats of size (5’x3’) and thickness (25mm) and edge beading also polished, with names & dates engraved on it as per EIC. The Roll of honour board shall be fitted in XEN’s office. All tools/tackles/paint material/brackets/hooking arrangement/fasteners shall be provided by the allotted firm.

Providing of glass top for XEN’s table of size (6’x3’) of thickness 12mm with one size curved as per dimensions of table top. The edges shall be moulded/chamfered.

M/S MOHAMMAD AMIN MALIK

MUMIN NABI WAR

Yasir Manzoor Lone