Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance 651 MUKHERJEE NAGAR DELHI 110009 | DELHI | DELHI | DELHI | 110009 | Admitted-Finance |
| 2 | Admitted-Finance B 157 MANSAROVAR GARDEN NEW DELHI 110015 | WEST | DELHI | 110015 | Admitted-Finance |
Tender Value
Refer Docs
EMD Value
₹90,000
Closing Date
20 Jun 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Principal Shaheed Bhagat Singh Colleg
Principal Shaheed Bhagat Singh Colleg
Construction of New Rooms (Three story and Renovation Work of Staff Room (Room No.-B-6) and Toilets) at Shaheed Bhagat Singh College, Sheikh Sarai, New Delhi- 110017
2023_DU_754185_1
SBSC/273
Open Tender
Civil Works - Buildings
Item Rate
180 days
As Per Tender Documents
Please refer Tender documents.
8 documents required · 8 mandatory
₹1,000
Yes
Principal Shaheed Bhagat Singh College
₹90,000
Yes
(In the Committee Room, Shaheed Bhagat Singh Colle
10 Jul 2023
20 May 2023
21 Jun 2023
20 May 2023
20 Jun 2023
20 May 2023
26 May 2023
Amount
CONSTRUCTION OF NEW BLOCK
SUB HEAD :- EARTHWORK Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, all complete as per direction of SBSC/ Consultant. All kinds of soil
SUB HEAD :- EARTHWORK Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m., all complete as per direction of SBSC/ Consultant.
SUB HEAD :- EARTHWORK Surface dressing of the ground including removing vegetation and in equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m., all complete as per direction of SBSC/ Consultant. All kinds of soil
SUB HEAD :- EARTHWORK Supplying chemical emulsion in sealed containers including delivery as specified, all complete as per direction of SBSC/ Consultant. Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
SUB HEAD :- EARTHWORK Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Treatment of soil under existing floors using chemical emul sion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor, all complete as per direction of SBSC/ Consultant. With Chlorpyriphos/Lindane E.C. 20% with 1% concentration.
SUB HEAD ;- PCC & RCC WORK Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level, all complete as per direction of SBSC/ Consultant. 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
SUB HEAD ;- PCC & RCC WORK Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level, all complete as per direction of SBSC / Consultant. 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)
SUB HEAD ;- PCC & RCC WORK Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level, all complete as per direction of SBSC/ Consultant. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
SUB HEAD ;- PCC & RCC WORK Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement, all complete as per direction of SBSC/ Consultant. 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natu ral sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
SUB HEAD ;- PCC & RCC WORK Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources), all complete as per direction of SBSC/ Consultant.
SUB HEAD ;- PCC & RCC WORK Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete
SUB HEAD ;- PCC & RCC WORK Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform
SUB HEAD ;- PCC & RCC WORK Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers
SUB HEAD ;- PCC & RCC WORK Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts
SUB HEAD ;- PCC & RCC WORK Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete below plinth level, all complete as per direction of SBSC/ Consultant. Thermo-Mechanically Treated bars of grade Fe-500D or more.
SUB HEAD ;- PCC & RCC WORK Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level, all complete as per direction of SBSC/ Consultant. Thermo-Mechanically Treated bars of grade Fe-500D or more.
SUB HEAD ;- BRICK WORK Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)
SUB HEAD ;- STONE WORK Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels, all complete as per direction of SBSC/ Consultant. Granite of any colour and shade Area of slab over 0.50 sqm
SUB HEAD ;- STONE WORK Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels, all complete as per direction of SBSC/ Consultant. Granite of any colour and shade Area of slab over 0.50 sqm
SUB HEAD ;- STONE WORK Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge, all complete as per direction of SBSC/ Consultant.
SUB HEAD ;- WOOD & PVC WORK Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood
SUB HEAD ;- WOOD & PVC WORK Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
SUB HEAD ;- WOOD & PVC WORK Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).
SUB HEAD ;- WOOD & PVC WORK Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured): Rectangular or square
SUB HEAD ;- WOOD & PVC WORK Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : 25 mm dia (heavy type)
SUB HEAD ;- WOOD & PVC WORK Providing and fixing bright finished brass handles with screws etc. complete: 125 mm
SUB HEAD ;- WOOD & PVC WORK Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.
SUB HEAD ;- WOOD & PVC WORK Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
SUB HEAD ;- WOOD & PVC WORK Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete : 150 mm
SUB HEAD ;- WOOD & PVC WORK Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm).
SUB HEAD ;- WOOD & PVC WORK Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides
SUB HEAD ;- WOOD & PVC WORK Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)
SUB HEAD :- FLOORING WORK Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size Size of Tile 800 x 1200 mm
SUB HEAD :- FLOORING WORK Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 800x800 mm
SUB HEAD :- ROOFING & FALSE CEILING WORK Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design, all complete as per direction of SBSC/ Consultant. In 75x75 mm deep chase
SUB HEAD :- ROOFING & FALSE CEILING WORK Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet, all complete as per direction of SBSC/ Consultant.
SUB HEAD :- ROOFING & FALSE CEILING WORK Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter
SUB HEAD :- ROOFING & FALSE CEILING WORK Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Coupler- 110 mm
SUB HEAD :- ROOFING & FALSE CEILING WORK Single pushfit Coupler- 110 mm
SUB HEAD :- ROOFING & FALSE CEILING WORK Bend 87.5°-110 mm bend
SUB HEAD :- ROOFING & FALSE CEILING WORK Shoe (Plain)-110 mm shoe
SUB HEAD :- ROOFING & FALSE CEILING WORK Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc., all complete as per direction of SBSC/ Consultant. 110 mm diameter
SUB HEAD :- ROOFING & FALSE CEILING WORK Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
SUB HEAD :- ROOFING & FALSE CEILING WORK Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum moisture resistant board
SUB HEAD :- ROOFING & FALSE CEILING WORK Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance ? 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge. With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6)
SUB HEAD :- ROOFING & FALSE CEILING WORK Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner.
SUB HEAD :- ROOFING & FALSE CEILING WORK Providing and laying roof insulation with 40 mm thick impervious sprayed, closed cell free Rigid Polyurethane foam over deck insulation conforming to IS - 12432 Pt. III (density of foam being 40-45 kg/ cum), over a coat of polyurethane primer applied @ 6-8 sqm per litre, laying 400 G polythene sheet over PUF spray and providing a wearing course of 40 mm thick cement screed 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) in chequered rough finish, in panels of 2.5 m x 2.5 m and embedding with 24 G wire netting and sealing the joints with polymerized mastic, all complete as per direction of SBSC/ Consultant.
SUB HEAD :- PLASTER & PAINTING WORK CEMENT PLASTER (IN COARSE SAND) 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand)
SUB HEAD :- PLASTER & PAINTING WORK 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand), all complete as per direction of SBSC/ Consultant.
SUB HEAD :- PLASTER & PAINTING WORK 06 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand)
SUB HEAD :- PLASTER & PAINTING WORK Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm
SUB HEAD :- PLASTER & PAINTING WORK Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, all complete as per direction of SBSC/ Consultant.
SUB HEAD :- PLASTER & PAINTING WORK Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
SUB HEAD :- PLASTER & PAINTING WORK Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
SUB HEAD :- PLASTER & PAINTING WORK Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Old work (one or more coats)
SUB HEAD :- FURNITURE ITEMS Providing Woodan Study Chair Size- (890x395x480 mm), Top made of 18mm thick ISI Mark pre laminated MDF Board IS : 14587-1998 in approved shade with half round lipping with thinner polish or touch wood polish. Structure Made of M.S. Angle Iron Frame 32x32x3/2.5mm thick duly welded.Two coats of air drying synthetic enamel paints made over two coat of metal primer for pipe structure.as per approved design & shade, all complete as per direction of SBSC/ Consultant.
SUB HEAD :- FURNITURE ITEMS Providing Woodan Study Table Size- (600x460x760mm), Top made of 18mm thick ISI Mark pre laminated MDF Board IS : 14587-1998 in approved shade with half round lipping with thinner polish or touch wood polish, Structure made of M.S. Angle Iron Frame 32x32x3/2.5mm thick duly welded. Two coats of air drying synthetic enamel paints made over two coat of metal primer for pipe structure. as per approved design & shade, all complete as per direction of SBSC/ Consultant.
SUB HEAD :- FURNITURE ITEMS Providing Woodan Proffessor Chair Size- (900x500x560 mm), Frame made of ERW round pipe 25mmdia x 2.0mm thick in one piece. Seat & Back made of Teak wood section 45 x 22mm.Duly polished shining black enamel Paint the best quality high strength Nylon/Plastic Cane wire shall be used The 6 no. of cane wire Shall be passed in each hole of back and seat. In seat, front section to be doubled and rounded. Seat shall be fitted over flate size 25x4mm thick in depth wise of frame on both side with minimum 3 no. screws on each side. Back rest shall be fitted by round head steel screws 3 ns. On each side as per approved design & shade, all complete as per direction of SBSC/ Consultant.
SUB HEAD :- FURNITURE ITEMS Providing Woodan Proffessor Table Size- (1525x900x750 mm), Table top made of 25mm thick ISI Marked Pre Laminated MDF Board IS-14587-1998, Teak wood half round 50mm wide, Lipping supported from inside by Jungle wood 25mm x 25mm, DRAWER BOX CUBOARD :- CR sheet 0.80mm thick Confirming to IS-513, DRAWER SIZE :- 500(L)X100mm(D) Minimum, FRAME & STRUCTRUE :- ERW Square pipe25x25x1.25mm in size 1100 (L) x 600(W)x732(H) mm, CUPBOARD SHUTTER :- BOX TYPE made of 0.80mm CR sheet Confirming to IS-513. FOOT REST :-ERW square pipe 25x25x1.25mm in full length and gap between two pipes approx. 85.mm. as per approved design & shade, all complete as per direction of SBSC/ Consultant.
SUB HEAD :- FURNITURE ITEMS Providing & fixing of Roller Blinds- The Blind system consist of a coated aluminium tube of 38 mm diameter with provision of fabric clamping. The Fabric is rolled up and down through a chain drive system with built in drive gear and an over run brake system. The side brackets are universal type suitable both for wall and ceiling mounting. The bottom end of the fabric is rolled over an oval shape aluminium tube with provision to lock the fabric, all complete as per direction of SBSC/ Consultant.
SUB HEAD :- RE-BARING WORK Rebaring by using various Diameter 12 mm to 25 mm Dia, Hilti Make Chemical (Re- 500) max. depth 300 mm, all complete as per direction of SBSC/ Consultant.
SUB HEAD :- REPAIRING WITH MICRO CONCRETE WORK Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of SBSC/ Consultant. 50mm average thickness
SUB HEAD :- REPAIRING WITH MICRO CONCRETE WORK Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of SBSC/ Consultant. Bars above 12 mm diameter
SUB HEAD :- REPAIRING WITH MICRO CONCRETE WORK Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of SBSC/ Consultant. Upto and including 12mm dia.
SUB HEAD :- REPAIRING WITH MICRO CONCRETE WORK Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction ofSBSC/ Consultant. Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make
SUB HEAD :- REPAIRING WITH MICRO CONCRETE WORK Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of SBSC/ Consultant. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2). 25 mm average thickness in 2 layers.
SUB HEAD :- REPAIRING WITH MICRO CONCRETE WORK Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/ masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of SBSC/ Consultant. Epoxy injection grout in concrete/RCC work of approved make
SUB HEAD :- REPAIRING WITH MICRO CONCRETE WORK Providing, erecting, maintaining and removing temporary protective screens made out of specified fabric with all necessary fixing arrangement to ensure that it remains in position for the work duration as required of SBSC/ Consultant. Wooven PVC cloth
SUB HEAD :- REPAIRING WITH MICRO CONCRETE WORK Cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with coarse sand followed by and including cleaning with oil free air blast as per direction ofSBSC/ Consultant.
SUB HEAD :- REPAIRING WITH MICRO CONCRETE WORK Shotcreting R.C.C. columns, beams and slabs etc. in layers with approved design mix concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria] including the cost of centering and shuttering at edges and corners etc. as directed by SBSC/ Consultant. 50mm thick in Grade M 25 with cement content not less than 330 kg per cum
SUB HEAD :- REPAIRING WITH MICRO CONCRETE WORK Providing and inserting 12mm dia galvanised steel injection nipple in honey comb area and along crack line including drilling of holes of required diametre (20mm to 30mm) up to depth from 30mm to 80mm at required spacing and making the hole & crack dust free by blowing compressed air, sealing the distance between injection nipple with adhesive chemical of approved make and allow it to cure complete as per direction of Engineer-In-Charge.
SUB HEAD :- REPAIRING WITH MICRO CONCRETE WORK Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of "L" shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by SBSC/ Consultant.
SUB HEAD :- REPAIRING WITH MICRO CONCRETE WORK Providing & fixing Structural steel work riveted, bolted or welded in built up sections, , including cutting, hoisting, fixing in position for Column strengthening, all complete as per direction of SBSC/ Consultant.
SUB HEAD :- REPAIRING WITH MICRO CONCRETE WORK Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of SBSC/ Consultant .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding.
INTERNAL WIRING Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Group -C
INTERNAL WIRING Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
INTERNAL WIRING Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 4 sq. mm + 1 X 4 sq. mm earth wire
INTERNAL WIRING Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).
INTERNAL WIRING Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
INTERNAL WIRING Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required 2 way 5/6 A Switch
INTERNAL WIRING Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required 15/16 A Switch
INTERNAL WIRING Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required 3 Pin 5/6 Socket Outlet
INTERNAL WIRING Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required 3 Pin 15/16 Socket Outlet
INTERNAL WIRING Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20mm dia PVC conduit
INTERNAL WIRING Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25mm dia PVC conduit
SUB-HEAD II - FANS & LIGHT FIXTURES: Supply of Recess mounted LED 2'x2' luminaire delivering an initial system lumen of 3300 lumens & the luminaire shall be with system efficacy ≥ 100 lm / W. Housing: CRCA, Rim: Engneering plastic / CRCA. Optics: polycarbonate / PMMA/ Polysterene, IP20 Protection. The operating CCT shall be 5700K with CRI of ≥80. The luminaire shall be with BIS Registered electronic driver with input voltage range of 150 to 270V , THD ≤ 10% & PF ≥ 0.95, 50,000 Hrs LED Life with L70 Criteria. The LED Driver shall be easily avaiable in India for repair and service. The LED shall be SMD type. Luminaire shall have minimum surge protection of 2KV.The luminaire shall be with following certifications: LM79 & LM80 issued by LED manufacture along with Photo Biological Safety Standard. All complete as per direction ofSBSC/ Consultant.
SUB-HEAD II - FANS & LIGHT FIXTURES: Supply of Surface Mount Round Led Downlighter consuming a system wattage of 15W (±10%) & the luminaire shall be with system efficacy ≥ 100 lm / W. Housing: CRCA Powder Coated. IP20 , Optics: PMMA/Polysterene Diffuser. The operating CCT shall be 5700K with CRI of ≥80. The luminaire shall be with BIS Registered electronic driver with input voltage range of 150 to 270V , THD ≤ 10% & PF ≥ 0.9, 50,000 Hrs LED Life with L70 Criteria. The LED Driver shall be easily avaiable in India for repair and service. The LED shall be SMD type. Luminaire shall have minimum surge protection of 2KV.The luminaire shall be with following certifications: LM79 with NABL Own LAB & LM80 issued by LED manufacture along with Photo Biological Safety Standard. All complete as per direction of SBSC/ Consultant.
SUB-HEAD II - FANS & LIGHT FIXTURES: Supply of 2ft Linear LED luminaire delivering an initial system lumen of 903 lumens & the luminaire shall be with system efficacy ≥ 90 lm / W. The luminaire Housing shall be made of PC & the diffuser shall be of polycarbonate/PMMA. The operating CCT shall be 6500K with CRI of ≥80. The luminaire shall be with BIS Registered electronic driver with input voltage range of 150 to 270V , THD ≤ 20% & PF ≥ 0.95 , 50,000 Hrs LED Life with L70 Criteria, IP20. The LED Driver shall be easily avaiable in India for repair and service. The LED shall be SMD type. Luminaire shall have minimum surge protection of 2KV.The luminaire shall be with following certifications: LM79 with NABL Own LAB & LM80 issued by LED manufacture along with Photo Biological Safety Standard. All complete as per direction of SBSC/ Consultant.
SUB-HEAD II - FANS & LIGHT FIXTURES: Supplying, installation, Testing & Commissioning of 225 mm dia heavey duty Exhust fan, Power- 220-240 VAC,50/60 Hz, Speed- 1400 RPM,Power Source- Corded Electric, High Velocity including supply and fixing of all necessary supports. All complete with labour and materials as per drawings, specifications and directions of SBSC/ Consultant.
SUB-HEAD II - FANS & LIGHT FIXTURES: Supply, installation, testing and commissioning of 400mm Wall Mounted 3 speed Fans with oscillation and tilt mechanisam, Aerodynamically designed and balanced blades including supply and fixing of the electronic regulators with all necessary supports. All complete with labour and materials as per drawings, specifications and directions of SBSC/ Consultant.
SUB HEAD - U.P.S. POINTS & CIRCUITS: P & F ups points in 2 mm thick PVC conduit with 2 X 2.5 sq. mm insulated copper wire along with 1 X 1.5 sq. mm PVC insulated wire for earthing including bends, nipples, junction, M.S. switch boxes each to have 3 nos. 6 A 5 pin modular socket 1 X 6 A indicator controlled by 1 X 16 A modular type switch compl fine finish incl. making necessary connection & start of equipment as per details. Complete in all respects as per direction of Engineer/ Architect. Make as specified above) DIRECT POINT
SUB HEAD - AC POINT WIRING: Point wiring for power plug point with 4 sq.mm stranded PVC insulated copper wire including earthing the third pin with 2.5 sq. mm copper insulated earthing wire complete with supply and fixing of recessed mounted industrial type 3 pin 32 A metal clad socket and plug, 20A MCB (Motor duty) housed in a 16 gauge M.S. Box
SUB HEAD :- DISMANTLING & DEMOLISING WORK Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead, all complete as per direction of SBSC/ Consultant. In cement mortar
SUB HEAD :- DISMANTLING & DEMOLISING WORK Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm
SUB HEAD :- DISMANTLING & DEMOLISING WORK Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved, all complete as per direction of SBSC/ Consultant.
SUB HEAD :- AIR CONDITIONING WORK Supply, installation , testing and commissioning of 1.5 TR 5 Star Invertor cassette type air conditioners including remote, mounting brackets for outdoor and indoor units with rotary compressor, copper condenser and first charge refrigerant R410A/R22/Other, including connection of copper pipe and material supplied with complete unit etc. as required (Excluding cost of copper pipe) within Refinery / Petrochemical Complex/ Refinery Township as per direction of Engineer-in-charge.
SUB HEAD :- AIR CONDITIONING WORK Supply & fixing of additional length of copper tube for split A/C commissioning including all accessories.
SUB HEAD :- AIR CONDITIONING WORK Supply, Installation, Testing and Commissioning of Hard u-PVC condensate drain piping complete with fittings, support as per specification with 6mm thick closed cell elastomeric nitrile rubber tubular insulation ( Supreme / Superflon ) up to the nearest drain point . 25 mm
SUB HEAD :- AIR CONDITIONING WORK Supply, Installation, Testing and Commissioning of 2 core x 1.5 sq.mm copper conductor shielded communication cable as per requirement at site complete with supports etc. for control between indoor and outdoor unit in suitable PVC Conduit or communication between Indoor Unit & Remote Controllers in suitable PVC Conduit. 2 C * 1.5 sq.mm Cable
SUB HEAD :- AIR CONDITIONING WORK Wall Chiselling for Copper Piping / Drain Piping . Filling shall be in the Client Scope
SUB HEAD :- AIR CONDITIONING WORK Supplying, fixing & painting of Heavy duty GI steel wall bracket stand Load carrying capacity up to 160 Kgs Powder Coating for Rust Prevention with fastner for Air conditioner outdoor unit.
RENOVATION WORK OF STAFF ROOM & TOILETS (BLOCK B-6)
SUB HEAD :- DISMANTLING & DEMOLISING WORK Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-charge.
SUB HEAD :- DISMANTLING & DEMOLISING WORK Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer in-Charge. (a) Internal Work- Exposed on wall
SUB HEAD :- DISMANTLING & DEMOLISING WORK Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)
SUB HEAD :- DISMANTLING & DEMOLISING WORK Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar
SUB HEAD :- DISMANTLING & DEMOLISING WORK Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below
SUB HEAD :- DISMANTLING & DEMOLISING WORK Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm
SUB HEAD :- DISMANTLING & DEMOLISING WORK Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore
SUB HEAD :- DISMANTLING & DEMOLISING WORK Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge: Up to 150 mm diameter
SUB HEAD :- DISMANTLING & DEMOLISING WORK Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
SUB HEAD :- RCC WORK:- Providing & Laying of Reinforced Cement Concrete 1:1.5:3 ( 1 Cement :1.5 Coarse Sand : 3 Aggregate) including necceassary Reinforcement & Proper Shuttering work, all complete as per direction of the Engineer- in Charge.
SUB HEAD :- WALL & FLOOR TILES Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
SUB HEAD :- WALL & FLOOR TILES Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.
SUB HEAD :- WALL & FLOOR TILES Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size. Size of Tile 800 x 1200 mm
SUB HEAD :- WALL & FLOOR TILES Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 800x800 mm
SUB HEAD :- BRICK WORK Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)
SUB HEAD ;- STONE WORK Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels, all complete as per direction of SBSC/ Consultant. Granite of any colour and shade Area of slab upto 0.50 sqm
SUB HEAD ;- STONE WORK Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels, all complete as per direction of SBSC/ Consultant. Granite of any colour and shade Area of slab over 0.50 sqm
SUB HEAD ;- STONE WORK Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge, all complete as per direction of SBSC/ Consultant. Granite Work
WOOD WORK & PVC WORK Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood
WOOD WORK & PVC WORK Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
WOOD WORK & PVC WORK Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).
WOOD WORK & PVC WORK Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured): Rectangular or square
WOOD WORK & PVC WORK Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : 25 mm dia (heavy type)
WOOD WORK & PVC WORK Providing and fixing bright finished brass handles with screws etc. complete: 125 mm
WOOD WORK & PVC WORK Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.
WOOD WORK & PVC WORK Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
WOOD WORK & PVC WORK Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete : 150 mm
WOOD WORK & PVC WORK Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm).
WOOD WORK & PVC WORK Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)
WOOD WORK & PVC WORK Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
WOOD WORK & PVC WORK Providing and fixing to existing door frames. 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames.
SUB HEAD :- ROOFING & FALSE CEILING WORK Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design, all complete as per direction of SBSC/ Consultant. In 75x75 mm deep chase
SUB HEAD :- ROOFING & FALSE CEILING WORK Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet, all complete as per direction of SBSC/ Consultant.
SUB HEAD :- ROOFING & FALSE CEILING WORK Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter
SUB HEAD :- ROOFING & FALSE CEILING WORK Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Coupler- 110 mm
SUB HEAD :- ROOFING & FALSE CEILING WORK Single pushfit Coupler- 110 mm
SUB HEAD :- ROOFING & FALSE CEILING WORK Bend 87.5°-110 mm bend
SUB HEAD :- ROOFING & FALSE CEILING WORK Shoe (Plain)-110 mm shoe
SUB HEAD :- ROOFING & FALSE CEILING WORK Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc., all complete as per direction of SBSC/ Consultant. 110 mm diameter
SUB HEAD :- ROOFING & FALSE CEILING WORK Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
SUB HEAD :- ROOFING & FALSE CEILING WORK Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum moisture resistant board
SUB HEAD :- ROOFING & FALSE CEILING WORK Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance ? 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge. With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6)
SUB HEAD :- PLASTER & PAINTING WORK CEMENT PLASTER (IN COARSE SAND) 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand)
SUB HEAD :- PLASTER & PAINTING WORK 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand), all complete as per direction of SBSC/ Consultant.
SUB HEAD :- PLASTER & PAINTING WORK 6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand)
SUB HEAD :- PLASTER & PAINTING WORK Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm
SUB HEAD :- PLASTER & PAINTING WORK Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, all complete as per direction of SBSC/ Consultant. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.
SUB HEAD :- PLASTER & PAINTING WORK Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
SUB HEAD :- PLASTER & PAINTING WORK Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
SUB HEAD :- PLASTER & PAINTING WORK Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Old work (one or more coats)
SUB HEAD :- FURNITURE ITEMS Supplying and placing Seat shall be made of 1.4cm thick hot pressed plywood upholstered with fabric and moulded Polyurethane foam. Seat size shall be 550cm x 49cm. The back shall be injection moulded in Glass filled polyamide which shall be upholstered with Mesh fabric. The back consist of adjustable lumbar support shall be made of injection moulded polypropylene having an adjustment of 6cm. Back size shall be 50cm x 68cm. The Polyurethane foam for seat shall be of density 55 kg per meter cube. The three way adjustable armrests is made of glass filled polyamide arm structure with PU armtop and height adjustment of 7cm. The armtop has swivel and to and fro motion. The inner tube of armrest is chrome plated. The powder coated welded tubular frame is made of dia. 2.8cm x 0.2cm thick MS round tube. The frame is fitted with Plastic caps made of injection moulded glass filled Polypropylene. The overall dimensions of the frame shall be 63.5cm x 59.5cm x 97.5cm. The seat height shall be 42.5cm.
SUB HEAD :- FURNITURE ITEMS Providing Woodan Proffessor Table Size- (1525x900x750 mm), Table top made of 25mm thick ISI Marked Pre Laminated MDF Board IS-14587-1998, Teak wood half round 50mm wide, Lipping supported from inside by Jungle wood 25mm x 25mm, DRAWER BOX CUBOARD :- CR sheet 0.80mm thick Confirming to IS-513, DRAWER SIZE :- 500(L)X100mm(D) Minimum, FRAME & STRUCTRUE :- ERW Square pipe25x25x1.25mm in size 1100 (L) x 600(W)x732(H) mm, CUPBOARD SHUTTER :- BOX TYPE made of 0.80mm CR sheet Confirming to IS-513. FOOT REST :-ERW square pipe 25x25x1.25mm in full length and gap between two pipes approx. 85.mm. as per approved design & shade, all complete as per direction of SBSC/ Consultant.
SUB HEAD :- FURNITURE ITEMS Supplying and Placing in place of 3 seater sofa. The overall dimensions of the sofa shall be 2060W x 905D x 855H. The seat should be made of PU foam with Density 28 ± 2 kg/cu.mtr having an additional top layer of supersoft PU foam with Density 32 ± 2 kg/cu. Seat should be upholstered with fabric or leatherite. 2) BACK FOAM: The back should be made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood (which also shall be resistance and termite proof as per IS:303.) and pinewood of cross section deviod of major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag spring assembly is mounted over understrucrure for cushioning effect. It should be a welded assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap.
SUB HEAD :- FURNITURE ITEMS Supplying and Placing in place of 2 seater sofa. The overall dimensions of the sofa shall be 1460W x 905D x 855H. The seat should be made of PU foam with Density 28 ± 2 kg/cu.mtr having an additional top layer of supersoft PU foam with Density 32 ± 2 kg/cu. Seat should be upholstered with fabric or leatherette. 2) BACK FOAM: The back should be made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood (which also shall be resistance and termite proof as per IS:303.) and pinewood of cross section deviod of major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag spring assembly is mounted over understrucrure for cushioning effect. It should be a welded assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap.
SUB HEAD :- FURNITURE ITEMS Supplying and placing centre table whose Glass shall be 10+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with understructure. It shall be a welded assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762. overall dimensions of table shall be Width of table= 112.0 cm, Depth=60.0 cm, height=35.1 cm.
SUB HEAD :- FURNITURE ITEMS Supplying and placing side table whose glass shall be 10+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with understructure. It shall be a welded assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762. overall dimensions of table shall be Width of table= 60.0 cm, Depth=60.0 cm, height=35.1 cm.
SUB HEAD :- FURNITURE ITEMS Back Cabinet (Laminate top) Providing & Placing in position 3'0" high & deep box type File cabinets made out 1 mm BWR Board with WHITE 1.5 mm thick High gloss Laminate on top & lipping ( outside edge) The same will be provided with 2 shutters made of 19 mm thick board with 1 mm th. High gloss laminate with all others exposed internal / surfaces provided with Duco paint with melamine coating complete with side hinged shutters complete with handles , locks etc. The same will be provided with a single shelf in middle . ( for the purpose of contractor's payment only front elevation) area will be measured .
SUB HEAD :- FURNITURE ITEMS Storage (Laminate top) Providing and fixing wooden storage 450 mm wide having sides, partitions shelves and shutter made of 19 mm th. Board with 1 mm th. High gloss laminate with all other exposed internal / external surface provided with Duco paint with melamine coating complete with side hinged sutter complete with handles , locks etc. ( for the purpose of contractor's payment only front elevation area of a cabinate will be measured .
SUB HEAD :- FURNITURE ITEMS Providing & fixing of Roller Blinds- The Blind system consist of a coated aluminium tube of 38 mm diameter with provision of fabric clamping. The Fabric is rolled up and down through a chain drive system with built in drive gear and an over run brake system. The side brackets are universal type suitable both for wall and ceiling mounting. The bottom end of the fabric is rolled over an oval shape aluminium tube with provision to lock the fabric, all complete as per direction of SBSC/ Consultant.
SUB HEAD :- ELECTRICAL WORKS Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. group C
SUB HEAD :- ELECTRICAL WORKS Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
SUB HEAD :- ELECTRICAL WORKS Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 4 sq. mm + 1 X 4 sq. mm earth wire
SUB HEAD :- ELECTRICAL WORKS Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).
SUB HEAD :- ELECTRICAL WORKS Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
SUB HEAD :- ELECTRICAL WORKS Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required 2 way 5/6 A Switch
SUB HEAD :- ELECTRICAL WORKS Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required 15/16 A Switch
SUB HEAD :- ELECTRICAL WORKS Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required 3 Pin 5/6 Socket Outlet
SUB HEAD :- ELECTRICAL WORKS Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required 3 Pin 15/16 Socket Outlet
SUB HEAD :- ELECTRICAL WORKS Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20mm dia PVC conduit
SUB HEAD :- ELECTRICAL WORKS Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25mm dia PVC conduit
SUB HEAD :- FANS & LIGHT FIXTURES Supply of Recess mounted LED 2'x2' luminaire delivering an initial system lumen of 3300 lumens & the luminaire shall be with system efficacy ≥ 100 lm / W. Housing: CRCA, Rim: Engneering plastic / CRCA. Optics: polycarbonate / PMMA/ Polysterene, IP20 Protection. The operating CCT shall be 5700K with CRI of ≥80. The luminaire shall be with BIS Registered electronic driver with input voltage range of 150 to 270V , THD ≤ 10% & PF ≥ 0.95, 50,000 Hrs LED Life with L70 Criteria. The LED Driver shall be easily avaiable in India for repair and service. The LED shall be SMD type. Luminaire shall have minimum surge protection of 2KV.The luminaire shall be with following certifications: LM79 & LM80 issued by LED manufacture along with Photo Biological Safety Standard. All complete as per direction ofSBSC/ Consultant.
SUB HEAD :- FANS & LIGHT FIXTURES Supply of Surface Mount Round Led Downlighter consuming a system wattage of 15W (±10%) & the luminaire shall be with system efficacy ≥ 100 lm / W. Housing: CRCA Powder Coated. IP20 , Optics: PMMA/Polysterene Diffuser. The operating CCT shall be 5700K with CRI of ≥80. The luminaire shall be with BIS Registered electronic driver with input voltage range of 150 to 270V , THD ≤ 10% & PF ≥ 0.9, 50,000 Hrs LED Life with L70 Criteria. The LED Driver shall be easily avaiable in India for repair and service. The LED shall be SMD type. Luminaire shall have minimum surge protection of 2KV.The luminaire shall be with following certifications: LM79 with NABL Own LAB & LM80 issued by LED manufacture along with Photo Biological Safety Standard. All complete as per direction of SBSC/ Consultant.
SUB HEAD :- FANS & LIGHT FIXTURES Supply of 2ft Linear LED luminaire delivering an initial system lumen of 903 lumens & the luminaire shall be with system efficacy ≥ 90 lm / W. The luminaire Housing shall be made of PC & the diffuser shall be of polycarbonate/PMMA. The operating CCT shall be 6500K with CRI of ≥80. The luminaire shall be with BIS Registered electronic driver with input voltage range of 150 to 270V , THD ≤ 20% & PF ≥ 0.95 , 50,000 Hrs LED Life with L70 Criteria, IP20. The LED Driver shall be easily avaiable in India for repair and service. The LED shall be SMD type. Luminaire shall have minimum surge protection of 2KV.The luminaire shall be with following certifications: LM79 with NABL Own LAB & LM80 issued by LED manufacture along with Photo Biological Safety Standard. All complete as per direction of SBSC/ Consultant.
SUB HEAD :- FANS & LIGHT FIXTURES Supplying, installation, Testing & Commissioning of 225 mm dia heavey duty Exhust fan, Power- 220-240 VAC,50/60 Hz, Speed- 1400 RPM,Power Source- Corded Electric, High Velocity including supply and fixing of all necessary supports. All complete with labour and materials as per drawings, specifications and directions of SBSC/ Consultant.
SUB HEAD :- FANS & LIGHT FIXTURES Supply, installation, testing and commissioning of 400mm Wall Mounted 3 speed Fans with oscillation and tilt mechanisam, Aerodynamically designed and balanced blades including supply and fixing of the electronic regulators with all necessary supports. All complete with labour and materials as per drawings, specifications and directions of SBSC/ Consultant.
SUB HEAD :- FANS & LIGHT FIXTURES U.P.S. POINTS & CIRCUITS :- P & F ups points in 2 mm thick PVC conduit with 2 X 2.5 sq. mm insulated copper wire along with 1 X 1.5 sq. mm PVC insulated wire for earthing including bends, nipples, junction, M.S. switch boxes each to have 3 nos. 6 A 5 pin modular socket 1 X 6 A indicator controlled by 1 X 16 A modular type switch compl fine finish incl. making necessary connection & start of equipment as per details. Complete in all respects as per direction of Engineer/ Architect. Make as specified above) DIRECT POINT
SUB HEAD :- FANS & LIGHT FIXTURES AC point Wiring :- Point wiring for power plug point with 4 sq.mm stranded PVC insulated copper wire including earthing the third pin with 2.5 sq. mm copper insulated earthing wire complete with supply and fixing of recessed mounted industrial type 3 pin 32 A metal clad socket and plug, 20A MCB (Motor duty) housed in a 16 gauge M.S. Box
SUB HEAD :- AIR CONDITIONING WORK Supply, installation , testing and commissioning of 1.5 TR 5 Star Invertor cassette type air conditioners including remote, mounting brackets for outdoor and indoor units with rotary compressor, copper condenser and first charge refrigerant R410A/R22/Other, including connection of copper pipe and material supplied with complete unit etc. as required (Excluding cost of copper pipe) within Refinery / Petrochemical Complex/ Refinery Township as per direction of Engineer-in-charge.
SUB HEAD :- AIR CONDITIONING WORK Supply & fixing of additional length of copper tube for split A/C commissioning including all accessories.
SUB HEAD :- AIR CONDITIONING WORK Supply, Installation, Testing and Commissioning of Hard u-PVC condensate drain piping complete with fittings, support as per specification with 6mm thick closed cell elastomeric nitrile rubber tubular insulation ( Supreme / Superflon ) up to the nearest drain point . 25 mm
SUB HEAD :- AIR CONDITIONING WORK Supply, Installation, Testing and Commissioning of 2 core x 1.5 sq.mm copper conductor shielded communication cable as per requirement at site complete with supports etc. for control between indoor and outdoor unit in suitable PVC Conduit or communication between Indoor Unit & Remote Controllers in suitable PVC Conduit. 2 C * 1.5 sq.mm Cable
SUB HEAD :- AIR CONDITIONING WORK Wall Chiselling for Copper Piping / Drain Piping . Filling shall be in the Client Scope
SUB HEAD :- AIR CONDITIONING WORK Supplying, fixing & painting of Heavy duty GI steel wall bracket stand Load carrying capacity up to 160 Kgs Powder Coating for Rust Prevention with fastner for Air conditioner outdoor unit.
SUB HEAD :- PLUMBING WORK Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
SUB HEAD :- PLUMBING WORK Providing and fixing White vitreous wash basin Size -375x475x130 with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require, all complete as per direction of SBSC/ Consultant.
SUB HEAD :- PLUMBING WORK Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make, all complete as per direction of SBSC/ Consultant.
SUB HEAD :- PLUMBING WORK Providing & fixing Sensotronic Sensor Faucet for wash basin deck mounted, all complete as per direction of SBSC/ Consultant.
SUB HEAD :- PLUMBING WORK Providing and fixing Braided Hoses with Two 15mm CP Brass Nuts & Rubber Washers Without Nipple (Suitable for Geysers and basins). , all complete as per direction of SBSC/ Consultant. 45 cm length 15 mm nominal bore
SUB HEAD :- PLUMBING WORK Providing & fixing of Wall Mounted Paper towel dispensers towels with C/Z folds capacity: 400-600 C/Z towels made of AISI 304 Stainless Steel with Satin finished. The towel tray opening has bound edges to minimise tearing of paper towels. Door fixed to the body with two rivets, allowing it to be swung open for replenishment.Slot for viewing content level on the front, all complete as per direction of SBSC/ Consultant.
SUB HEAD :- PLUMBING WORK Providing and Fixing of Health Faucet Kit (Flexible Chrome Hose, Handset & Bracket) allcomplete including CP flange etc., all complete as per direction of SBSC/ Consultant.
SUB HEAD :- PLUMBING WORK Providing & fixingTowel Ring Square with C.P. brass wall brackets & C.P brass screws complete as required, all complete as per direction of SBSC/ Consultant. Size 600 x 20 mm size
SUB HEAD :- PLUMBING WORK Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore, all complete as per direction of SBSC/ Consultant.
SUB HEAD :- PLUMBING WORK Providing and fixing of Sensor Operated Optimum Hand Dryers - Weld-free cover fixed to the base with 4 Allen bolts. Base in ABS thermoplastic UL 94-V0. Thermoplastic fan wheel PA6 UL 94-V0. Class F induction motor incorporating a safety thermal cut-off. PP UL 94-V0 aluminium centrifugal single inlet fan wheel. Heating element incorporating a safety thermal cut-off. Electronic infrared detection sensor. Adjustable detection adjustable (15-25 cm)., all complete as per direction of SBSC/ Consultant.
SUB HEAD :- PLUMBING WORK Providing & Fixing Automatic soap dispensor Capacity-0.8 L. made by aluminium / ABS with Chrome finished , all complete as per direction of SBSC/ Consultant.
SUB HEAD :- PLUMBING WORK Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre/8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc, all complete as per direction of SBSC/ Consultant.
SUB HEAD :- PLUMBING WORK Providing and fixing C.P. brass extension nipple (size 15mm x 50mm) of approved make and quality, all complete as per direction of SBSC/ Consultant.
SUB HEAD :- PLUMBING WORK Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board 470x420 mm bowl depth 178 mm
SUB HEAD :- PLUMBING WORK Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.
SUB HEAD :- PLUMBING WORK Providing & fixing Curved shapechrome finished urinal partition with 10mm thick frosted glass size-(900mm x 450mm), all complete as per the direction of Engineer-in-charge/ Consultant.
SUB HEAD :- PLUMBING WORK Providing and fixing horzontal/vertical Hot water geyser made of MS body with copper jacket inside with necessary inlet, outlet, drain, overflow, vent and all safety accessories etc. complete including cutting and making good the walls, wherever required, all complete as per direction of SBSC/ Consultant. 15 LITRE
SUB HEAD :- PLUMBING WORK Providing and fixing 600 x 450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers , all complete as per direction of SBSC/ Consultant.
SUB HEAD :- PLUMBING WORK Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
SUB HEAD :- PLUMBING WORK Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge (Cement shall be free issue material): Concealed work including cutting chases and making good the walls etc, all complete as per direction of SBSC/ Consultant. 15 mm nominal outer dia Pipes
SUB HEAD :- PLUMBING WORK Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge (Cement shall be free issue material): Concealed work including cutting chases and making good the walls etc, all complete as per direction of SBSC/ Consultant. 20 mm nominal outer dia Pipes
SUB HEAD :- PLUMBING WORK Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge (Cement shall be free issue material): Concealed work including cutting chases and making good the walls etc, all complete as per direction of SBSC/ Consultant. 25 mm nominal outer dia Pipes
SUB HEAD :- PLUMBING WORK Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge (Cement shall be free issue material): Concealed work including cutting chases and making good the walls etc, all complete as per direction of SBSC/ Consultant. 32 mm nominal outer dia Pipes
SUB HEAD :- PLUMBING WORK Providing & fixing UPVC soil, waste, vent pipework comprising UPVC pipe conforming to IS :4985-1983 and of required class as specified below and fittings (moulded as well as fabricated) like elbows, bends, reducers, threaded tail pieces, caps and and other specials. jointing with cement solvent, chasing, cutting and making good the walls, complete in all respects including testing of complete installation, all complete as per direction of SBSC/ Consultant. 75 mm dia
SUB HEAD :- PLUMBING WORK Providing & fixing UPVC soil, waste, vent pipework comprising UPVC pipe conforming to IS :4985-1983 and of required class as specified below and fittings (moulded as well as fabricated) like elbows, bends, reducers, threaded tail pieces, caps and and other specials. jointing with cement solvent, chasing, cutting and making good the walls, complete in all respects including testing of complete installation, all complete as per direction of SBSC/ Consultant. 100 mm dia
NCI Global Infratech
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .