Reconstruction of Rajagopuram, Chandikeswarar sannathy, Other sannathies repiar and Outer Prahara Flooring to Arulmigu Agatheeswarar Thirukoil, Koovanur, Thirukovilur Tk, Kallakurichi Dt

Amount

Providing Scaffolding for vimanam raja gopuram with Casurnia post non flammble wherever necessary for main form work and by providing non flammabel as covering the areas & plat form for inspection etc all complete. (ht upto 15'-0")

(ht upto 25'-0")

(ht upto 75'-0")

Ornamental Brick work in er the core walls of vimanams/Gopurams,with LIME Mortar 1:2 (one of lime and two of msand) mix using country bricks 83/4"x43/8"x23/4" all vari vargams, moulds, sthambas,mukapatram,koodu,nasi,and all ornamental brick workcomplete panchavarnam agaraies, karnakoodus etc forming core walls rajagopuram/vimanams complete in cluding cement al labour chagers(Vimanam/Gopuram upto a height of 15')

Ornamental Brick work in er the core walls of vimanams/Gopurams,with LIME Mortar 1:2 (one of lime and two of msand) mix using country bricks 83/4"x43/8"x23/4" all vari vargams, moulds, sthambas,mukapatram,koodu,nasi,and all ornamental brick workcomplete panchavarnam agaraies, karnakoodus etc forming core walls rajagopuram/vimanams complete in cluding cement al labour chagers(Vimanam/Gopuram upto a height of 50')

Providing vargapoochu over the core walls of vimanams/Gopurams,with LIME Mortar 1:1.5 (one of lime and one and half of msand) complete including Shaping the mukhapathram, mahanasi, koodu all ornamental works to proper shape by embedding broken bricks of shaped/chiseled bricks , rough plastering with LIME Mortar 1:1.5 (one of lime and one and half of msand) and finshing with final ornamental plastering nayam theervani including cost and conveyance of all materials, labour there fore lifting of materials, all working in heights curing with water etc complete including all extra for folding and including clearing from the vimanams/gopurams 100 sft superficial area for kalkaram. ht 15'

Providing vargapoochu over the core walls of vimanams/Gopurams,with LIME Mortar 1:1.5 (one of lime and one and half of msand) complete including Shaping the mukhapathram, mahanasi, koodu all ornamental works to proper shape by embedding broken bricks of shaped/chiseled bricks , rough plastering with LIME Mortar 1:1.5 (one of lime and one and half of msand) and finshing with final ornamental plastering nayam theervani including cost and conveyance of all materials, labour there fore lifting of materials, all working in heights curing with water etc complete including all extra for folding and including clearing from the vimanams/gopurams 100 sft superficial area for kalkaram. ht 50'

Providing new sudhai vigrahams in the vimanams and Rajagopurams with Copper rod reinforcement of suitable dia with binding wires wherever necessary, shaping the core with broken bricks set in LM 1:1.5 finishing the same with LM 1:1.5 bringing to the correct shape (Lakshana) in conformist with silpa sastra inclusive of special ornaments, weapons, peedam etc., complete and providing L.M. Nayam theervai wherever necessary. inclusive of cost and conveyance of all materials, such as cement broken bricks, and Copper rods. binding wire all labour for working in heights, curing lifting of materials etc., complete including Exterior Emulsion painting 2 coats over a primary coat (one vigraham is accountable with one head, 4 hands with weapons, ornamental costumes etc., as per prathima lakshans, Vigraham height is measurable from the crown top to the bottom of foot only If peetam is provided the rate with peetam may be adopted as detailed hereunder) Ht 2'6" to 3'6"

Brick work in Lime mortar 1:2 (one of lime and two of msand) using country bricks ( 83/4"*41/4"*23/4") size for the following inculding curing etc. complete complying with std. specification Upto basement

Plastering with lime mortar 1:1.5 (one of lime and one and half of msand) mix to 12mm thick including cost and conveyance of all materials to site and all labour charges etc

Special Ceiling Plastering with cement mortar 1: 3 (one cement and three sand) 10mm thick finished with neat cement including providing band cornice, ceiling cornice, curing scaffolding etc ., complete in all respects and complying with relevant std specifications.

Painting with colour (eagavarnam) good emulsion paints complete for the vimanams/gopurams,including cost and conveyance of all materials , labours charges including artist painter, working in heights, lifting of materials,cost of brushes etc, complete

Removal of the modern brick wall in lime mortor awar from all labour charges etc complete the std specification.,,

Remvoal of the old Pavukkal away from the site etc.,

Restoration by providing water wash removal of enmael paint (Combination of gastic soda and low preasurre water with little acid) are used for removel of enamel on stone and oil smudge) and approrimats methodology to restore the originalities of the existing granite structure inclusive of hire charges scaffolding arrangements conveyance charges for tools & plants and machinaries to the workship spot and cleaning the site after completion of work etc

Pointing with Lime mortar 1:1.5 ( one of lime and one and half of sand) including all labour charges, tools and plants etc complete compling the std specification.,

Removing the Cement Concrete flooring away from site etc complete.,

Cement concrete 1:2:4 mix using 10-12mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete

Supplying and fixing teak wood temple type including all materials, labour charges for manufacturing and fixing I position including all furniture fittings etc complete with std specifications.

Painting new wood work with good quality enamel paint two coats including priming coat with cost conveyance and labour charges etc complete compling the specification.,

Removing the weathering course lime concrete away from site etc complete.,

Weathering course with brick jelly lime concrete using 20mm brick jelly with pure slacked lime over stone slab in the proportion of 32:12.5 and well watering consolidated with wooden beaters to slop including cost and conveyance of materials to site and labour charges etc complete

Plastering with Lime Mortar 1:2 (One lime and two Sand) 20mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used including finsihing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers.

Removal of the damaged old stones all labour charges etc complete the std specification.,Floor

Refixing the removed old stones including labour charges etc complete wall

Paving with cut stone flooring using cut stone of size600x600mm and 100mm thick and all the sides are machine cutting, top surface is neatly dressed and pointing with cement mortar 1:5 including all materials and labour charges. (New stone) A)Inner

Paving with cut stone flooring using cut stone of size600x600mm and 100mm thick and all the sides are machine cutting, top surface is neatly dressed and pointing with cement mortar 1:5 including all materials and labour charges. (New stone) B)Outer

Paving with cut stone flooring using cut stone of size600x600mm and 100mm thick and all the sides are machine cutting, top surface is neatly dressed and pointing with cement mortar 1:5 including all materials and labour charges. (Old Stone) Outer

Supplying and fixing MS grills to window and ventilator including the cost of necessary scrub and applying priming cost paint etc., complete.

Painting iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over one coat of red oxide priming coat in all floors including cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Earth work excavation and depositing on bank with in initial lead of 10 m and initial lift of 2m in hard stiff clay, stiff black cotton soil, hard red earth, earth mixed with small sized boulders and hard gravelly soil as per SS 20B

Supplying and filling in foundation, basement, etc with filling Msand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Refilling with excavated earth other than sand with an initial head load of 100 mts. and depositing the earth as shown by the departmental officers in layers of not more than 15 cm thick well rammed, watered and consolidated etc. complete complying with standard specification

Cement Concrete 1:5:10 (One Cement, Five sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification

Cement Concrete 1:2:4 (One Cement, Two sand and Four hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification

Providing and laying in position, Standardised Concrete Mix M20 Grade in accordance with IS 456:2000 using 20mm and down graded hard broken granite stone jelly for all rcc works with minimumm cement content 325Kg/m3 and maximum water cement ratio of 0.55, including admixture(plasticiser/super plasticiser) in recommanded proportions as per IS 9103 to acclerate, retard setting of concrete, improve workability with out i paring strength and durability with about (5 cum) 7730 Kg of 20mm machine crushed stone jelly and with about (3.3 Cum) 5156 Kg of 10 12mm machine crushed stone jelly and with about (4.79cum) 7670 Kg of sand, but excluding cost of reinforcement grill and fabrication charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing etc and providing fixtures like fan clamps in RCC floor/ roof slabs wherver necessary without claming extra complete complying std specification and also directed by departmental officers. The coarse and fine aggregates to be used should comply with requirements of IS standards(No Seperate payment will be made by the department for excess usage of materilas). For Foundation and Basement

Madras terrace roofing with brick on edge 75m lime concret 3 coat of flat tiles, 3 coat lime plater top and bottom including materilas and all labour charges

Supplying and Fixing of seasoned taek wood ffor scantling cover 2m & 3m in length including all labour charges and wrougth and put up etc compplete.,

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid) Grade beam

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid) Plain Surface

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Supply of cut stone , cut stone pillar and cut stone beam etc complete the std specification. A)Wall

Supply of cut stone , cut stone pillar and cut stone beam etc complete the std specification. B)Pavukkal

Labour Charges for dressing and Fixing the cut stone of various stages lime mortor including pointing the same mortor etc complete the std specification.

For Chitiravanam

For Jagathiadthistanam, padmam

For Kandam

For Kabothagam & Viyalam

For Jagathi

For Kumutham

For Kandapam pattikai

For Aswapatham

For Veerakandapothiyal

For Kabothagam

For Ulvari

For Pavukkal

For Uluthirakkal

For Vasakkal

Nasithalai

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in existing trunking box on wall and ceiling with with Module GI switch box on wall with 6A one way module switch with module front plate with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire for Light point / fan point (for electronic regulator) ( 5 points / Coil) Higher End ( DATA A )

Supply and fixing of 1 no.6A two module 5 pin socket , 1 no. 6A one module switch on suitable module surface mounting Box (GI ) with module cover plate (plastic) on wall with connections. Higher End (S D 375)

Supply and fixing of single box type 1 x 20 W single LED fitting complete with TW round blocks on wall or ceiling with LED tube with PVC unsheathed Copper leads from terminals to the fitting. (Data B)

Supply and fixing of fancy glass shade and 9W LED for BH point. (SD 79 )

Supply and fixing of 25W LED street light fitting with LED (Lower end) with 19mm dia. GI pipe (class B) with 1 no.19mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting (S D 446 )

Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete With S&F of Suitable AI frame on wall with PVC unsheathed copper leads with MS clamps with S&F of SMC box with 10 SPMCB Terminal Connector and with painting (Data D )

Supply and fixing of 3 nos.6A two module 5 pin socket , 3 nos. 6A one module switch on suitable module surface mounting Box ( GI ) with module cover plate (plastic) on wall with connections. Higher End (SD 387 )

Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch on suitable module surface mounting Box (GI ) with module cover plate (plastic) on wall with connections. Higher End ( SD 399 }

Supply and run of 35mm x 20mm powder coated duct with door arrangements complete with MS angle and bolt & nuts comple. (Data E)

Supply and run of 35mm x 45mm powder coated duct with door arrangements complete with MS angle and bolt & nuts comple. (Data F)

Supply and run of MS flat for clamps of size 2' x 1' on pillar with suitable Bolt / nuts and painting of suitable colour. (Data G )

Supply and Run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in the existing PVC duting with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire . ( DATA H )

Supply and Run of 2 of 4 sq.mm. (56/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in the existing PVC duting with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire . ( DATA I )

Supply and clamping of 4 x 2.5 sq.mm PVC LTUG armoured copper cable in on post or on wall with MS Clamps. (Data J )

Supply and laying of 4 x 2.5 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good (Data K )

Supply and laying of 4 x 10 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good (SD 180)

Supply and clamping of 4 x 10 sq.mm PVC LTUG armoured Alu cable on post or on wall with MS Clamps. (SD 198)

Supply and fixing of brass cable gland for 4 x 25/ 10 sqmm PVC armoured LTUG cable with earth connection. (SD 163)

Supply and providing cable end termination of 4 x 10 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete (Data L)

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A DP MCB Isolator as incoming and 6 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End (SD 513 )

Supply and fixing of 6 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 18 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End (SD 545 )

Supply and run of 4 x 6 sq.mm PVC insulated SC unsheathed Cu.Conductor of 1100V on 7/20 GI bearer wire for service connection mains. (SD 68 )

Supply and run of 4 x 6 sq.mm PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 32mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron up right and end supports for mains.( SD 73)

Supply and fixing of powder coated box on wall fabricated with MS sheet of 16 gauge of size 900mm x 300mm x 450mm with 3 nos. of 63A (500V) porcelain fuse units, 1 no. of 63 TPN sheet steel double break switch with HRC Fuse units provision for fixing TNEB meter with electrical connections complete. (Data N )

Supply and fixing of 63A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with earth connection only. (SD 647 )

Supply and fixing of 32A DP MCB in sheet steel enclosure box with electrical connections complete. (Data O )

Earthing as per the PWD standard with an earth electrode of 2mt class 'B' GI pipe of dia not less than 32mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry. (SD 212)

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection (S D 371 )

Supply and fixing of brass cable gland for 2x4 ( 4 x 2.5) sqmm PVC armoured LTUG cable with earth connection. (SD 158)

sub total

EEYARKAI BUILDERS AND DEVELOPERS PRIVATE LIMITED (BID ID -1222703)