PROVN OF WASHER MEN SHOP ALONGWITH WASHING POINT, STATIC WATER TANK AND KOTE BUILDING AT 172 INF BN (TA) MADRAS, BRICHGUNJ MILITARY STATION ,PORT BLAIR

Amount

Excavation in trenches, not exceeding 1.5 metre wide and not exceeding 1.5 metre depth for foundation, etc., and getting out in any type of soil all as specified and directed

Surface dressing not exceeding 15cm deep and getting out in any type of soil all as specified and directed

Excavation over areas not exceeding 1.5m deep and getting out in any type of soil all as specified and directed

All as per Item No 03 hereinbefore but exc 1.5 metre and n exc. 3 metre.

Returning filling including spreading, levelling, watering and well ramming in layers n.exc 25cm all as specified and as directed

Removing Excavated soil not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point all as specified and as directed

Back filling of retaining walls using approved earth obtained from excavation including spreading, levelling, watering and well ramming in layers n.exc 25cm complete all as specified and as directed

Materials and labour Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete all as specified and directed

Materials and labour Plain Cement Concrete Type C2 1:3:6 (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete all as specified and directed

Materials and labour Plain Cement Concrete Type B2 1:2:4 (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete all as specified and directed

Materials and labour for Reinforced cement concrete M30 (design mix) in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete complete all as specified and directed

Use and waste off form work to sides of rough finished concrete foundations, foootings, bases of columns, raft and raft beams, sides and soffits if any of foundation and plinth beams and similar work vertical or to batter compelte all as specified and as directed

Materials and labour for Reinforced cement concrete M30 (design mix) in columns,pillars, piers, posts and struts etc complete all as specified.

Use and waste off form work to sides of Pillars, posts, struts, piers,columns and sanctions

Materials and labour for Reinforced cement concrete M30 (design mix) in Beams, cantilevers, bressumers, lintels over 1.5m span, complete all as specified.

Use and waste off form work to sides and soffits of rough finished floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs,etc alos splays between floors, and beams,etc compelte all as specified and as directed by Engineer in Charge.

Materials and labour for Reinforced cement concrete M30 (design mix) in Slab supported on walls, beams and columns in floors, roofs, landings, balconies canopies, deck slabs and in shelves and the like complete all as specified.

Use and waste off form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick(Horizontal or sloping).

Use and waste off form work to edges of concrete flats, treads, breaks in floors, window cills,concrete railings, opeinings in concrete walls, floors and roofs n.exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and smimilar work all exceeeding 10cm wide and n.exc 20cm wide with rough finished surfaces.

Materials and labour for Reinforced cement concrete M30 (design mix) in Chajjas complete all as specified.

Use and waste off form work to chullah hoods, chajjas,troughs and similar items including edges,etc compelte all as specified and as directed

Materials and labour for RCC M30 in Walls, retaining walls, basement walls and the like; any thickness;

Use and waste off formwork to faces of walls,retaining walls, abutments, parapets and similar work for rough finished surfaces.

Use and waste off formwork to faces of walls,retaining walls, abutments, parapets and similar work for Fair finished surfaces.

Materials and labour for TMT bars 10mm dia and over as in reinforcement cut to length, bent to shape required including cranking hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing clips all as specified and as directed

All as per item No 25 hereinbefore but 6 mm to 8mm dia.

Materials and labour for TMT bars 5mm dia and over upto and incl 10mm dia in stirrups, spacers, and binders in reinforcement cut to length, bent to shape required including cranking hooking ends and binding with mild steel wire all as specified and as directed

Material & Labour for Moorum/Red Bajri Filling in floors or pavings, laid in layers n exc 15cm thick, spread, levelled and rammed including watering and complete all as specified and as directed

Materials and labour treating the bottom & sides of excavation @ the rate of 5 Lit of anti termite emulsion per sqm of surface area

Materials and labour for anti termite treatment on top of earth filling @ 5 lits/sqm

Materials and labour for filling pf boulder of guage 40 to 80mm filled dry, hand packed tightly complete all as specified and as directed.

Materials and labour for hardcore of gauge not exceeding 63 mm of broken granite stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface all as specified and as directed

Materials and labour precast cement concrete block masonry with PCC solid blocks in 1:3:6 type C1 (using 20mm graded stone aggregates), exc. 10cm in width and set in CM 1:4 complete all as specified and directed.

Materials and labour for precast cement concrete solid block masonary with PCC solid blocks 1:3:6 type C1 (using 20mm graded stone aggregate) not exceeding 10cm in width and setting in cement mortar (1:4) etc complete all as specified and as directed

Materials and labour for rendering 10mm thick on fair faces of brick/concrete surface in CM (1:6) finished even and smooth without using extra cement all as specified and as directed

Materials and labour for external rendering 5mm thick in CM 1:4 mixed with water proofing compound (water proofing compound shall be used as per manufacturers instructions) over and including 10mm thick in CM 1:6 over brick or concrete surfaces finished even and fair all as specified and as directed .

Materials and labour for rendering to ceiling in 5mm thick on fair faces concrete surface in CM (1:3) finished even and smooth without using extra cement.

Materials and labour for Rendering 10mm thick in CM 1:3 on fair faces of brick work or concrete surfaces of walls, finished even and smooth ( without using extra cement) using water proofing compound @ 3% by weight of cement finished even fair and smooth without using extra cement, complete all as specified and as per manufacturers instructions. (Note: WPC will be measured and paid separately) complete all as specified.

Materials and labour for Rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces of walls, finished even and smooth ( without using extra cement) complete all as specified.

Materials and labour for Rendering 15mm thick on external faces of brick work or concrete surfaces in CM 1:4

Supply only water proofing compound conforming to IS-2645 1975.

Materials and labour 10mm thick cement plaster in cm (1:3) on top of roof slab all as specified and as directed

Materials and labour for roof treatment with following specification complete all as specified and as directed by Engineer-in-Charge :- (i) Applying evenly a tack coat of bitumen primer @ 0.3 kg/ sqm. (ii) Laying a coat of hot bitumen 85/25 @ 1.2kg per sqm. (iii) Laying APP modified membrane weighting not less than 3 to 4 kg/sqm in 100 mm over laps both longitudinally and transversally. Overlaps shall be sealed by torch. The membrane shall be taken upto the thickness of slab/front fascia. iv) applying one coat of hot blown bitumen @ 1.2 kg/Sqm over the membrane

Materials and labour for providing 75mm thick PCC 1:4:8 type D2 (using 40mm graded aggregate) as sub base of floors all as specified and as directed

Materials and labour 75mm thick PCC(1:2:4) type B2 (using 20mm graded stone aggregate) as in flooring finished even and smooth using extra cement all as specified and as directed

Materials and labour Non skid ceramic tiles each tile area (sqr/rectangle) exc 0.06Sqm but not exceeding 0.11Sqm tile thickness 7 to 8 mm, in floors etc set and joined in neat cement slurry and pointed in white or coloured cement to match incl Screed bed or bedding layer with CM 1:4 15mm thick for laying floor finishes all as specified .

Materials and labour Glazed ceramic tiles coloured 300x 200x5 to 6mm thick on vertical surfaces such as skirting, dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match.incl 10mm thick in CM 1:3 as backing coat for fixing dado tiles all as specified.

Materials and labour for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete including 20mm screed bed CM 1:6.

Materials and labour for Machine cut kota stone slab flooring laid and jointed with grey cement slurry, mixed with pigment to match the shade of the slab including rubbing and polishing complete, Including 20mm thick screed bed in cement mortar 1:6 all as specified and as directed.

Materials and labour for Machine cut kota stone slab as in skirting laid and jointed with grey cement slurry, mixed with pigment to match the shade of the slab including rubbing and polishing complete, Including 10mm thick backing coat in cement mortar 1:4 all as specified and as directed.

Supply and fix Aluminium anodised (minimum anodisation is 15 microns) Door / window / Ventilator/partition frames and shutters (02 Nos glazed & gauzed), side hung type, without sash bars, standard aluminium grills, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, locking arrangements, tower bolts, aldrops, hinges etc., complete with standard aluminium sections, complete all as specified and as directed by Engineer-in-charge.(Aluminium section shall be of make Jindal/Hindalco/ Indalco). (Note:- Weight of various Aluminium sections, handles and locking arrangements shall only be considered for measurement for payment. However cost of rubber packing, aldrops, tower bolts, hinges etc given in the item shall be deemed to be included in the rate quoted. Glass panels, prelaminated particle boards, aluminium wire cloth as applicable will be measured and paid separately as supplied only).

Supply only 4 mm thick sheet glass ordinary quality and glazing with rubber packing around the glass, in squares not exceeding 0.50 sqm in each pane complete all as specified and as directed by Engineer-in-Charge.

Supply only 4 mm thick sheet glass ordinary quality and glazing with rubber packing around the glass, in squares exceeding 0.50 sqm in each pane complete all as specified and as directed by Engineer-in-Charge.

Supply ony 4 mm thick sheet figured glass and glazing with rubber packing around the glass, in squares exceeding 0.50 sqm in each pane complete all as specified and as directed.

Supply only 12 mm thick pre-laminated particle board, exterior grade, pre-laminated on one side with decorative choice lamination and other side white lamination fixed to Aluminium frame etc all as specified and directed

Supply only aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40 mm complete in repairs

Supply and fix floor door stoper of length 140mm of Aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed all as specified and directed

Materials and labour for oil bound distempering two coats over a coat of alkali resistant priming paint including preparation of new plastered or unplastered surfaces of wall complete all as specified and directed by Engineer - in -Charge.

All as item 58 hereinbefore but on ceiling

Materials and labour for two coats of whether proof exterior acrylic emulsion paint with anti fungal property over a coat of primer and a coat of external wall putty on newly plastered wall surfaces including preperation of surfaces etc complete all as specified and as directed

Materials and labour for applying two coats of cement base paint over a coat of primer on new plaster or untreated surfaces on walls incl preparation of wall surfaces all as specified

Materials and labour for 75mm thick Cement concrete in C1 type (1:3:6) using 20mm graded stone aggregate as in plinth protection and finished even and smooth with using extra cement all as specified and as directed

Material and Lobour for 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors all as specified and as directed

Materials and labour for PVC (SWR) bends any radius 110mm bore

Supply and fix rotational moulded polythylene water storage tanks 500 ltrs capacity (cylindrical or vertical with closed top) hoisted and fixed in position, complete all as specified and directed

Supply and fix 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed, minimum weight 142 gms,complete all as specified and directed

Supply and fix for 20 mm dia bore gun metal , globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.

Materials and labour for 25 mm bore unplasticised PVC pipes of pressure rating 10 Kgf/Sqcm fixed complete to walls, ceilings or in floors etc any type of pipe all as specified and as directed.

Materials and labour for 20 mm bore unplasticised PVC pipes of pressure rating 10 Kgf/Sqcm fixed complete to walls, ceilings or in floors etc any type of pipe all as specified and as directed.

Supply and fix of Bib tap cast copper alloy chromium plated 15mm dia with fancy type screwed down screwed for iron pipe or brass ferule etc complete all as specified and as directed.

Supply and fix 75 mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement

Supply and fix PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement

Supply and fix 110 mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to wall/floors complete all as specified and as directed.

Supply and fix 110 mm bore PVC [SWR] bend any radius, complete all as specified and as directed.

Supply and fix Galvanised iron tube, 50mm bore, medium grade with all fittings and fixed to wall or ceiling and laid in floors, complete all as specified and as directed.

Supply and fix Gun metal globe or gate valve of 50mm bore with iron wheel head, screwed both ends for iron pipes complete all as specified and as directed.

Supply & Fix mild steel angles, bars, flats wind ties for roof including securing bolts, posts and struts in fencing etc including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling bolting or riveting, etc. and similar work confirming to Fe-290 Gde E-165 complete.all as specified and directed.

Supply only PVC coated (1mm thick) chain link fencing exc 2.00 but n.exc 3.50 kg per sqm with size of mesh 50 x 50 mm and thickness of wire n.exc 2.83 mm all as specified and as directed.

Fixing only PVC coated chain link fencing including fixing of line wires any mesh, size and any type of standards, rails, straining bolts etc including provision of binding wires complete.(Supply of MS line wire and flat iron bolt & nuts measured and paid seperately)

Supply only 6mm dia wire PVC coated for support/line wire to chain link fencing complete.

Supply only mild steel bolts with hexagonal or square head one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut exc 5 cm long n.exc 10 cm long dia metre of neck exceeding 11 to 15 mm complete.

Supply and fix for Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc. complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing, Fe 410-W (Gde-E-250) quality-B,etc complete all as spd and directed.

Materials and labour for preparing new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces.

Materials and labour Point wiring complete with 1.5 sqmm single core FRLS PVC insulated and unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including PVC casing and caping and all accessories fixed to walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm copper cable green in colour as earth continuity conductor and connected to common earth dolly, including fabricated steel terminal box made out of 1.60mm thick MS sheet concealed in walls, with 3mm thick laminated sheet top cover for housing the switches, socket outlets, fan regulators etc., all as specified and as directed for one light/fan point controlled by one one way switch.

All as per item No. 84 here - in - before but for 3 pin 5 Amps switch socket combination on independent board.

All as per item No. 84 here - in - before but for 3 pin 15 Amps switch socket combination on independent board with 4 sq mm copper cable and provision of 4 sq mm FRLS PVC insulated stranded copper conductor cable for earth continuity conductor connected to common earth dolly connecting up to fittings complete.

Supply and fix switch piano flush button single pole oneway 5 amp.

Supply and fix switch socket outlet 3 & 2 pin (multi pin) 5 amp flush type.

Supply and fix switch socket outlet multipurpose, 3 pin 15 and 5 amp controlled by one switch, flush type.

Supply and fix ceiling rose surface bakelite 65x50mm 3 terminal

Supply and fix metal enclosure distribution board SPN, 4 way 240 volts, with 200 amps rated bus bar, with IP 42 protection and double door, suitable for mounting MCBs, including taking down old MCB/DB, complete all as as specified and as directed by Engineer-in-Charge Make :Legrand/C&S/L&T Note:- Incoming & Outgoing connections from the DB shall be provided with proper lugs/thimbles etc...

Supply and fixing energy efficient LED Smart bright batten 22 watt T/L fitting 4ft in length nano diffuser technology to ensure minimum loss in light transmitted, long life of over 30000 hours including lamp and connecting with twin core shethed cable from fitting to ceiling rose all as specified and as diected. Make : Philips Cat No BN021C LED20S PSU CDL GR or eqvt in make of Bajaj/Wipro.

Supply and fix new generation energy saving & environmental friendly long life versatile pressure die cast aluminum IP-65 road way luminaire with high power 25W LEDs and electronic driver including necessary brackets made out of 25mm bore GI light grade pipe 0.6m appx length fixed on wall with nuts, bolts etc complete all as specified and directed Make : Philips cat No BRP O20 LED HP/CW 240V V 25W or equilvalent in Wipro/ Havells

Supply and fix Wall mounting fan Sameera, electric driven single phase230 volts, oscillating type, 400 mm sweep, high quality ABS base with high speed motor and balanced blades and three leafed with 3 core copper cable of suitable size, complete all as per specified. Make Havells HSN code 8414 or eqvt in make of Bajaj/Wipro.

Supply and fix MCB single pole, 240 volts, 6 to 32 Amps, all as specified and as directed.Make : Havells or equvalent Legrand/L&T/Schneider

Supply and fix MCB SPN 240 volts, 5 to 32 Amps, all as specified and as directed. Make : Havells or equvalent Legrand/L&T/Schneider

Materials and labour for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick buried directly in ground ( earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less thab 1.5 Meter below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 20 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as specified and directed electrical plate No. 3 of SSR part - I

Supply and fix 25 mm bore GI tubing medium grade laid in trenches / floors or fixed to wall in any length with screwed and socket joints together with all galvanised GI fitting such as sockets, bends, elbows, tees, reducers, unions, jointing materials etc and pressure testing, Washing out complete all as specified and directed.

Supply and fix 25 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed, complete all as specified and as directed.

Materials and labour for cutting existing 50mm GI line and making branch connection of 25 mm dia GI line complete all as specified and directed.

Supply and fix 25 mm bore Gun metal gate valve with iron wheel head ISI Marked, screwed both ends suitable for GI tubing complete all as specified and directed.

Supply, lay, test and commissioning under ground XLPE insulated and PVC sheathed, amoured heavy duty ground cable suitable for earthed system, laying in trenches / duct sleeving through pipe in duct, ISI marked with aluminium stranded conductor 1100 volt grade of cross sectin area 4 C X 10 sqm

Supply and lay cable protection pipe of HDPE double wall corrugated (DWC) including couplers,bends etc of size 50mm OD and ID 38 mm confirming to IS 14930 -II and ISI Marked all specifed and directed

Supply and fix LED Flame proof 20w complete with all accessories all as directed by Engineer-in-Charge. ( Make: Crompton cat part no EXTN1LT8-16/20 equivalent Bajaj or Sudhir

Supply and fix Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V omplete all as specified and as directed by Engineer-in-Charge

Materials and labour for flame proof point wiring with stranded copper conductor cable in concealed PVC conduit with flame proof cable for one light point or one fan point controlled by one switch cable 1.5 Sqmm size,including new shunkun box ,round block juncton box ,and celling rose complete all as specified and directed. (Note : Rate inclusive of concealed PVC couduit)

Supply and installing JEF Electrical grounding system comprises of Electrode CU coated steel rods 17.2mmx3000mm (250M) UL Loresco Power fill carbon based backfill compound 2 bags of 50 pounds 17.2/OD SS clamp both side ECO friendly rust proof heavy duty weather proof Polyethylene earth pit chamber with following dimensions : 254 mm dia(top), 330mm dia (bottam) & 260mm (height) of part No R28.F03.SS02.CB1.

Materials and labour copper strip 20x3.15mm with saddles and fixing screws etc for roof conductors and down conductors above ground all as specified and directed.

Materials and labour for test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw all as specified and directed.

Supply and fix Singe pointed air termination copper rod 12mm dia and 300 mm long , fixed on overhead reservoirs for lightening protection with necessary connections to earthing etc complete all as specified and as directed.

M/s.Tarun Construction

M/S SHAJAHAN BUILDERS

B S Grewal

T.THIYAGARAJAN