REPAIR TO FLOOR WALL TILLING AND INTERNAL PLASTER AND ALLIED WORK IN MD ACCN AT AF STN SINGARSI UNDER AGE I AF SINGARSI

Amount

Taking down old cement plaster of any description on brick or stone walls or from concrete surface incl raking out joints, hacking for key,scrubbing down with water and removing unserviceable material area,complete all as specified and directed by Engineer-in-Charge.

M&L for Rendering 10mm thick in CM (1:6) on fair faces of brick surface / stone masonary finished even and smooth without using extra cement (including all necessary scaffolding),complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of newely plastered wall surfaces and applying two coats of Oil bound distemper over a coat of putty of 2 mm thickness over plastered surface to prepare the surface even and smooth,complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc. 15 cm thickness (below or above ground level ) and removing unserviceable material and disposed to low lying area etc, complete all as specified and directed by Engr-in-Charge..

M&L for plain cement concrete of 75mm thick type B-1, 1:2:4(using 20 mm graded stone aggregate) as in plinth protectioin/hard standing etc, complete all as specified and directed by Engr-in-Charge.

M&L for cement concrete of 25 mm thick type B-0 , 1:2:4 ( 12.5 mm graded aggregate ) as in sub floors (leveling course),complete all as specified and directed by Engineer-in-Charge.

M&L for cement concrete of 40mm thick in 1:2:4 type B-1 (20 mm graded aggregate) as in flooring finished even & smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for Preparation of old plastered or unplastered surfaces of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efforescent salts, and trading oil and greasy spot by using suitable chemical & removing nails, making good holes with birla white putty cracks and brooming to remove all dirt etc and applying one coat of white wash on old prepared surfaces of walls, complete all as specified and directed by Engineer-in-Charge.

M&L for Preparation of old plastered or unplastered surfaces of ceiling including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efforescent salts, and trading oil and greasy spot by using suitable chemical & removing nails, making good holes with birla white putty cracks and brooming to remove all dirt etc and applying one coat of white wash on old prepared surfaces of ceiling,complete all as specified and directed by Engineer-in-Charge.

M&L for Preparation of old plastered or unplastered surfaces of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efforescent salts, and trading oil and greasy spot by using suitable chemical & removing nails, making good holes with birla white putty cracks and brooming to remove all dirt etc and applying one coat of Cement based paint on old prepared surfaces of walls,complete all as specified and directed by Engineer-in-Charge.

M&L for Preparation of old plastered or unplastered surfaces of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efforescent salts, and trading oil and greasy spot by using suitable chemical & removing nails,filling cracks and making good holes with birla white putty, and brooming to remove all dirt etc and applying one coat of Oil bound distemper on old prepared surfaces of walls,complete all as specified and directed by Engineer-in-Charge.

M&L for Preparation of old wood and wood based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint etc,complete all as specified and directed by Engineer-in-Charge.

M&L for Preparation old steel surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint etc,complete all as specified and directed by Engineer-in-Charge.

M&L for preparing old decorated plastered or un-plastered surfaces of wall, pillasters, cornices etc and applying two coat of destempering 1st quality acrylic distemper (Ready mixed) having VOC content less than 50 gms/liter of approved manufacturer of required shade and colour complete all as per manufacturerer instruction over a coat Birla White Wall Care Putty ( thickness as required at site to make the surface even and smooth) on prepared wall over prepared surface of wall/celling complete all as specified and as per manufacturer’s instruction complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons,complete all as specified and directed by Engr-in-Charge

M&L for Non skid ceramic coloured designer seamless tiles 7 to 8mm thick area of each tile exceeding 0.18 sqm but not exc 0.38 sqm,in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed in CM (1:6),complete all as specified and directed by Engineer-in-Charge.

M&L for Glazed ceramic coloured designer seamless tiles 300x450x7mm thick on vertical surface as in skirting, dado set and jointed with neat cement slurry and pointed in white or coloured cement to match with the surface over and including 10mm thick screed in CM (1:4),complete all as specified and directed by Engineer-in-Charge.

M&L for taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each and refixing in same opening with all accessories (Such as Hinges any size, screws etc),complete all as specified and as directed by Engineer-in-Charge.

M/S ASHA ENTERPRISE (BID ID -3132310)

M/S New Builders Corporation (BID ID -3135366)

LALAN SHARMA (BID ID -3130762)

M/S MBS TRADING CO (BID ID -3132176)

M/S KUMAR AVINASH (BID ID -3133193)

M/S Subhadip Enterprise (BID ID -3134302)