Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.7 LAccepted-AOC LOWER DEVNAGAR VIKASNAGAR SHIMLA 09 | ₹13.7 L Quoted ₹14.3 L | L1 | Accepted-AOC Accepted due to lowest rates |
| 2 | L2₹14.8 L+₹49,397.50 (3.45%)Rejected-Finance R O BRAGTA BHAWAN CHOTTA SHIMLA | SHIMLA | HIMACHAL PRADESH | 171001 | ₹14.8 L+₹49,397.50 (3.45%) | L2 | Rejected-Finance Rejected |
| 3 | L3₹16.0 L+₹1.7 L (11.6%)Rejected-Finance | ₹16.0 L+₹1.7 L (11.6%) | L3 | Rejected-Finance Rejected |
| 4 | L4₹16.8 L+₹2.5 L (17.2%)Rejected-Finance R O VILL CHEOG TEH THEOG DISTT SHIMLA | ₹16.8 L+₹2.5 L (17.2%) | L4 | Rejected-Finance Rejected |
| 5 | L5₹17.4 L+₹3.1 L (21.5%)Rejected-Finance VILLAGE BADASH P O AG SHIMLA TEHSIL DISTT SHIMLA | SHIMLA | HIMACHAL PRADESH | 171001 | ₹17.4 L+₹3.1 L (21.5%) | L5 | Rejected-Finance Rejected |
Tender Value
₹17.8 L
EMD Value
₹35,600
Closing Date
24 Jun 2022, 5:00 pmClosed
Executive Engineer R B M C Shimla
Executive Engineer R B M C Shimla
Construction of Toilet block on MC land near PWD Office in ward No 22 Shanti Vihar under Tied Grant
2022_MC_61571_2
3701Dated08062022
Open Tender
Civil Works
Item Rate
60 days
Shimla
Please refer Tender Documents
7 documents required · 7 mandatory
₹500
Executive Engineer R B M C Shimla
₹35,600
30 Aug 2022
10 Jun 2022
25 Jun 2022
10 Jun 2022
24 Jun 2022
10 Jun 2022
Amount
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil.
Earth work in surface excavation not exceeding 30 cm in (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. Ordinary rock
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size)
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size)
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand) : 3 graded stone aggregate 20 mm nominal size)
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size)
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size).
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete
20 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)
Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers
Columns, Pillars, Piers, Abutments, Posts and Struts
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
Suspended floors, roofs, landings, balconies and access platform
Wall painting with acylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats
Carriage of material by mechanical transport including Loading & unloading & stacking of Muck/Debries in M.C. Dumping site at bharyal free of cost Tansporation charges will be paid extra (10km)
P/F M.S Pipe 40mm nominal bore for railing & fixed in M.S Angle /Channels.
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete 12mm thick
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : cement mortar 1:4 (1 cement : 4 coarse sand)
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Sal wood
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
P/L P.V.C. Pipe 100mm dia for approved quality
P/L P.V.C. Pipe 75mm dia for approved quality
P/F 100mm dia P.V.C. Bend (heavy duty)
P/F 75mm dia P.V.C. Bend (heavy duty)
P/F 100mm size 'P ' or 'S' trap for water closet W.C. etc.
P/L G.I. Pipe 15mm nominal bore (heavy duty)
P/F 8 to 10 Ltrs P.V.C. Low level flushing cistern with a pair of C.I. Or mild steel brackets complete (ISI marked)
P/F G.I. Nipple 15mm norminal bore for approved quality
P/F G.I./M.I. Union 15mm dia
P/F C.P. Brass stop cock 15mm dia heavy duty
P/F C.P. Brass Pillar cock 15mm dia heavy duty
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm
P/F M.S. Jet for approved quality
Providing and fixing water closet squatting pan (English type W.C. pan ) with 100 mm sand cast Iron P or S trap, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:
P/F C.P. Brass Bib cock 15mm dia (for approved quality)
P/F C.P. Brass Angle cock 15mm dia (for approved quality)
P/F C.P. Brass Conncection pipe 45cm long 15mm dia
Providing and fixing 600mmx450mm bevelled edge miror of superior glassmounted on 6mm thick A.C sheet or plywood sheet and fixed to woooden plugs with C.P brass screws and washers
P/F C.P. Brass Grating 100mm dia (heavy duty)
P/F P.V.C. Floor trap 75mm dia (heavy duty)
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 250 mm
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :250mm
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete 300 mm
Providing and fixing PVC water storage tank syntax or equivalent cost of connecting / tank nipples , making connection etc. 1000 litres capacity
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer
RAM LAL
chirag seth
SUNEEL CHAUHAN
Vinod Kumar Shah
MANOHAR LAL VERMA
gian singh
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .