REPAIR AND PAINTING OF STEEL FURNITURE OF OTM AND MD ACCN UNDER BSO OF GE(NORTH) UDHAMPUR

Amount

ALMIRAH LARGE STEEL Taking down old unserviceable existing lock from Almirah large/ steel and provide new approved quality (ISI mark) lock having six levers with duplicate keys alongwith key hole cover and fixed in position complete all as specified and directed by the Engineer-in-Charge. FD-1031

Taking down old unserviceable existing complete locking arrangements from Almirah large steel and provide new approved quality locking arrangements including steel rods, lock cover, and other connected fixtures as required for smooth functioning of locking arrangements approved quality, complete all as specified and directed by the Engineer-in-Charge. FD-1031

Taking down old demaged /broken existing handle from Almirah large steel and provide new approved quality stainless steel handle and fixed in position complete all as specified and directed by the Engineer-in-Charge. FD-1031

Taking down old unserviceable existing legs from Almirah large steel and provide new approved quality legs thickness of leg sheet not less than 1.9mm and fixed in position complete all as specified and directed by the Engineer-in-Charge. FD-1031

Taking down unserviceable shelves from existing Almirah large and supply and fixing new shelf thickness of shelf sheet not less than 1.9mm shape & size as specified on drg. FD-1031

Scratching out old defective paint spots/denting from Almirah large steel by abbressive paper/cloth and making the surface smooth by filling putty etc and applying two coat of synthetic paint first quality by sprayer method complete all as specified and directed by Engr-in-Charge. Make: Asian/ Nerolac/Berger. FD-1031

Fixing of old existing shelves fix in position with new Hooks and make functional all as specified and direct by Engr-in-Charge. FD-1031

ALMIRAH MED STEEL All as per item No 1 above but Almirah Med Steel, rest all as specified on drg. FD-1032

All as per item No 2 above but Almirah Med Steel, rest all as specified on drg. FD-1032

All as per item No 3 above but Almirah Med Steel, rest all as specified on drg. FD-1032

All as per item No 4above but Almirah Med Steel, rest all as specified on drg. FD-1032

All as per item No 5 above but Almirah Med Steel, rest all as specified on drg. FD-1032

All as per item No 6 above but Almirah Med Steel, rest all as specified on drg. FD-1032

All as per item No 7 above but Almirah Med Steel, rest all as specified on drg. FD-1032

LOCKER STEEL Taking down unserviceable existing Hasp & staple and supply and fixing new Hasp & staple approved superior quality rest as per drg. FD-1029

Taking down unserviceable existing bow handle and supply and fixing new approved superior quality CP handle rest as per drg. FD-1029

Taking down unserviceable existing conduite pipe from locker and supply and fixing new approved superior quality CP conduit pipe 19MM Dia along with hook for hanging conduit pipe length of conduit pipe as per drawing, rest all as specified on drg. FD-1029

All as per item No 4 above but Locker Steel, rest all as specified on drg. FD-1029

All as per item No 5 above but Locker Steel, rest all as specified on drg. FD-1029

All as per item No 6 above but Locker Steel, rest all as specified on drg. FD-1029

BED SIDE STEEL Taking down and UNSV shutter of bed side steel and S/F new shutter made out 1mm thick MS Sheet, shape and size as existing bed side steel. FD- 157(M)/HFD

Taking down old UNSV leg of bed side steel and S & F new steel leg and gas welding to match other legs of existing bed side table. FD- 157(M)/HFD

Spot welding to existing cracked joints of steel bed side locker by gas welding not exceeding 2.5cm in length as required and after welding joints be smoothen properly by grinding complete all as specified on drg. FD- 157(M)/HFD

All as per item ser No 6 above but bed side steel applying white paint make of paint Asian/ Berger/Nerolac , rest all as specified on drg. FD- 157(M)/HFD

TABLE OFFICE CLK STEEL Taking down of UNSV top of table clk steel and S/F new top made out of prelaminated particle board exterior grade 18/19mm thick one side teak face other side white shade alongwith four first class teak wood beading thickness of beading 4.0mm shall be fixed including two coat of polish should be apply on the beading rest all as per drawing. Make of prelaminated particle Board : Greenply/Century /Action tesa / Kitply. FD-1004

Taking down old UNSV drawer of table clk steel made out of 1mm thick MS sheet and S/F of new shutter having shape and size of existing drawer of table steel clk, rest all as per drg and directed. FD-1004

Repair and spot welding of cracks of drawer of old drawer of table office clk and office steel and make functional as existing shape and size as per drg. FD-1004

TABLE OFFICE OFFR STEEL All as per item ser No 25 above but table office offrs steel, rest all as specified on drg. FD-1003

All as per ser No 26 above but table offrs steel , rest all as specified on drg. FD-1003

Spot welding to existing cracked joints/broken leg and stiffener and other welding work of table office/clk steel not exiding 2.5 cm in length as required and after welding joints be smoothen properly by grinding rest as all as per drg and directed by Engr-in-charge. FD-1003

Taking down old UNSV shutter of table office offrs steel and S/F new shutter steel and shape and size of existing table. FD-1003

Painting to old defective paint spots/doting from table officer/clk steel leg abrasive cloth and making the surface smooth by filling putty etc and applying two coat of synthetic enamale as required Ogcolour FD-1003

RACK STEEL VARIOUS TYPE All as per ser No 32 above but Rack steel various type applying OG paint, rest all as specified on drg. FD-1038/ 1039/106(M)/1037/97(M)

STOOL STEEL All as per ser No 32 above but stool steel , rest all as specified on drg. FD-81(M) / 123(M)

TABLE DINNING ORs Taking down old unserviceable/defective top from table dinning for ORs and provide of new approved quality 18/19mm thick block board exterior grade, top of size 1900mmx685mm duly covered with 20 gauge aluminum anodized sheet before fixing the top 04 Nos rubber shoes shall be provided at the bottom of each legs complete all as per existing design and pattern/shown on drgs/directed by the Engr-in-Charge. FD-16(M)

Joining of broken leg/stifner and othe parts of table dining, with gas welding and making functional and as shown on drg. FD-16(M)

All as per item No 32 above but Table Dining OR (applying black paint) Make : Asian / Berger/ Nerolac . FD-16(M)

GI CHARPOY PLYTOP Removing/Taking down of old U/S plywood & U/S broken components & tightening the frame in original shape . supply and fixing of new plywood 12mm thick BWR phenolbonded on the charpoy duly fixed with nuts and bolts as per the existing pattern Rest all as shown on drgs & directed by Engr-in-Charge.Make. century/greenply/ Kitlpy phenol bonded. FD-16(M)

Removing of old damaged /bend iron stiffeners and S&F new stiffeners .size shall be as per existing stiffeners and duly painted with black paint FD-220

Removing of old damaged GI threeway elbow and supply and fix GI 32MM threeway elbow (ISI Mark) fixed as shown in drawing. FD-220

Removing old U/S demaged long rail and supply and fix new GI pipe 32MM dia ( ISI Mark) Make of GI Pipe Jindal/ Surya/ Prakash length of long rail shown in drawing. FD-220

Obtained demaged old U/S long rail converted to short rail and fixed after threading both side as shown in drawing and directed by Engr - in- charge. FD-220

Obtained demaged old U/S short rail converted to legs and fixed after threading as shown in drawing and directed by Engr - in- charge. FD-220

Supply and fixing new GI leg 32mm dia pipe ( ISI Mark) Make of GI Pipe Jindal/ Surya/ Prakash length of leg shown in drawing and directed by Engr - in- charge. FD-220

Removing of old U/S demaged checknut and supply new GI Checknut 32MM dia ( ISI Mark) and fix as shown in drawing . FD-220

TABLE STEEL 3'X2' FD-1007/1008 Removing u/s table top of table 3x2 with/without steel and S&F new table top made of 18mm thick prelaminated MDF board.Make ; Century/Greenply Kitply. FD-1007/1008

Painting to table steel 3’x2’/3’x3’ internally externally both sides on steel surface with synthetic enamel paint OG two coats after denting as required treatment, applying putty, scraping and cleaning surface complete all as specified and directed by Engineer-in-Charge. FD-1007/1008/ 1009

Supply and fix rubber shoes at bottom of all legs of table steel FD-1007/1008/1009

TABLE STEEL 3'X3' FD-1009 Removing u/s table top of table 3'x3' steel and S&F new table top made of 18mm thick prelaminated MDF board.Make ; Century/Greenply. (Top Brand/Top Model) FD-1009

CHAIR VERANDAH FD-256 Removing unserviceable cane from chair verandah and supply and reweaving of chair verandah steel with 4mm wide plastic cane superior quality Make : Shah/premium, incl painting with white synthetic enamel paint as directed by Engr-in-charge. (Top Brand/Top Model) FD- 256

Supply and fix rubber shoes at bottom of all legs of Chair verandah FD-256

TRESTLE STORE ROOM STEEL FD-1034 Two coat paint with sprayer method, color of paint Olive Green, make of paint Berger/asian/ Nerolac to trestle store room steel before paining, it is ensure that surface of trestle steel should be clean with wire brush or grinder as directed. FD-1034

Provide spot welding of broken parts of trestle store room steel FD-1034

NOTE: In the BOQ, reference to furniture drawings has been mentioned with alphabets "FD" followed by number relevant to the article mentioned, the same signifies this fact only. Incase, reference to furniture drawing is missing or erroneous, the work shall be executed as directed by the Engineer in Charge and no claim of the contractor on account of any misunderstanding on this aspect shall be admissible.

VEE KAY IND (BID ID -3296424)

shivom builders (BID ID -3295992)

R K BUILDERS (BID ID -3295983)

DEV RAJ MAGOTRA (BID ID -3300770)

M/S SHARMA TRADERS (BID ID -3296180)

Kalia Construction Company (BID ID -3295424)

TULSI RAINA AND SONS (BID ID -3301079)